target/linux/ramips/dts/mt7620a_tplink_archer-c2-v1.dts

   1 #include "mt7620a.dtsi"
   2
   3 #include <dt-bindings/gpio/gpio.h>
   4 #include <dt-bindings/input/input.h>
   5
   6 / {
   7         compatible = "tplink,archer-c2-v1", "ralink,mt7620a-soc";
   8         model = "TP-Link Archer C2 v1";
   9
  10         aliases {
  11                 led-boot = &led_wps;
  12                 led-failsafe = &led_wps;
  13                 led-running = &led_wps;
  14                 led-upgrade = &led_wps;
  15         };
  16
  17         chosen {
  18                 bootargs = "console=ttyS0,115200";
  19         };
  20
  21         leds {
  22                 compatible = "gpio-leds";
  23
  24                 lan {
  25                         label = "green:lan";
  26                         gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
  27                 };
  28
  29                 usb {
  30                         label = "green:usb";
  31                         gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
  32                         trigger-sources = <&ohci_port1>, <&ehci_port1>;
  33                         linux,default-trigger = "usbport";
  34                 };
  35
  36                 led_wps: wps {
  37                         label = "green:wps";
  38                         gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
  39                 };
  40
  41                 wan {
  42                         label = "green:wan";
  43                         gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
  44                 };
  45
  46                 wlan {
  47                         label = "green:wlan";
  48                         gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
  49                         linux,default-trigger = "phy1tpt";
  50                 };
  51         };
  52
  53         keys {
  54                 compatible = "gpio-keys";
  55
  56                 reset_wps {
  57                         label = "reset_wps";
  58                         gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
  59                         linux,code = <KEY_RESTART>;
  60                 };
  61
  62                 rfkill {
  63                         label = "rfkill";
  64                         gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
  65                         linux,code = <KEY_RFKILL>;
  66                 };
  67         };
  68
  69         rtl8367rb {
  70                 compatible = "realtek,rtl8367b", "rtl8367b";
  71                 cpu_port = <6>;
  72                 realtek,extif1 = <1 0 1 1 1 1 1 1 2>;
  73                 mii-bus = <&mdio0>;
  74         };
  75 };
  76
  77 &spi0 {
  78         status = "okay";
  79
  80         flash@0 {
  81                 compatible = "jedec,spi-nor";
  82                 reg = <0>;
  83                 spi-max-frequency = <30000000>;
  84
  85                 partitions {
  86                         compatible = "fixed-partitions";
  87                         #address-cells = <1>;
  88                         #size-cells = <1>;
  89
  90                         partition@0 {
  91                                 label = "u-boot";
  92                                 reg = <0x0 0x20000>;
  93                                 read-only;
  94                         };
  95
  96                         partition@20000 {
  97                                 compatible = "tplink,firmware";
  98                                 label = "firmware";
  99                                 reg = <0x20000 0x7a0000>;
 100                         };
 101
 102                         partition@7c0000 {
 103                                 label = "config";
 104                                 reg = <0x7c0000 0x10000>;
 105                                 read-only;
 106                         };
 107
 108                         rom: partition@7d0000 {
 109                                 label = "rom";
 110                                 reg = <0x7d0000 0x10000>;
 111                                 read-only;
 112
 113                                 nvmem-layout {
 114                                         compatible = "fixed-layout";
 115                                         #address-cells = <1>;
 116                                         #size-cells = <1>;
 117
 118                                         macaddr_rom_f100: macaddr@f100 {
 119                                                 reg = <0xf100 0x6>;
 120                                         };
 121                                 };
 122                         };
 123
 124                         partition@7e0000 {
 125                                 label = "romfile";
 126                                 reg = <0x7e0000 0x10000>;
 127                                 read-only;
 128                         };
 129
 130                         radio: partition@7f0000 {
 131                                 label = "radio";
 132                                 reg = <0x7f0000 0x10000>;
 133                                 read-only;
 134
 135                                 nvmem-layout {
 136                                         compatible = "fixed-layout";
 137                                         #address-cells = <1>;
 138                                         #size-cells = <1>;
 139
 140                                         eeprom_radio_0: eeprom@0 {
 141                                                 reg = <0x0 0x200>;
 142                                         };
 143
 144                                         eeprom_radio_8000: eeprom@8000 {
 145                                                 reg = <0x8000 0x200>;
 146                                         };
 147                                 };
 148                         };
 149                 };
 150         };
 151 };
 152
 153 &ethernet {
 154         pinctrl-names = "default";
 155         pinctrl-0 = <&rgmii1_pins &rgmii2_pins &mdio_pins>;
 156
 157         nvmem-cells = <&macaddr_rom_f100>;
 158         nvmem-cell-names = "mac-address";
 159
 160         port@5 {
 161                 status = "okay";
 162                 mediatek,fixed-link = <1000 1 1 1>;
 163                 phy-mode = "rgmii";
 164         };
 165
 166         mdio0: mdio-bus {
 167                 status = "okay";
 168         };
 169 };
 170
 171 &gpio1 {
 172         status = "okay";
 173 };
 174
 175 &gpio2 {
 176         status = "okay";
 177 };
 178
 179 &gpio3 {
 180         status = "okay";
 181 };
 182
 183 &state_default {
 184         gpio {
 185                 groups = "i2c", "uartf", "wled", "ephy", "spi refclk";
 186                 function = "gpio";
 187         };
 188 };
 189
 190 &wmac {
 191         nvmem-cells = <&eeprom_radio_0>, <&macaddr_rom_f100>;
 192         nvmem-cell-names = "eeprom", "mac-address";
 193 };
 194
 195 &ehci {
 196         status = "okay";
 197 };
 198
 199 &ohci {
 200         status = "okay";
 201 };
 202
 203 &pcie {
 204         status = "okay";
 205 };
 206
 207 &pcie0 {
 208         mt76@0,0 {
 209                 reg = <0x0000 0 0 0 0>;
 210                 nvmem-cells = <&eeprom_radio_8000>, <&macaddr_rom_f100>;
 211                 nvmem-cell-names = "eeprom", "mac-address";
 212                 mac-address-increment = <(-1)>;
 213         };
 214 };