target/linux/qualcommax/patches-6.1/0137-arm64-dts-qcom-ipq6018-add-SDHCI-node.patch

   1 From e4d7544ce092807e8c5aeb618cec30e2eb9b40c2 Mon Sep 17 00:00:00 2001
   2 From: Mantas Pucka <mantas@8devices.com>
   3 Date: Mon, 24 Apr 2023 15:13:32 +0300
   4 Subject: [PATCH 3/3] arm64: dts: qcom: ipq6018: add SDHCI node
   5
   6 IPQ6018 has one SD/eMMC controller, add node for it.
   7
   8 Signed-off-by: Mantas Pucka <mantas@8devices.com>
   9 Tested-by: Robert Marko <robimarko@gmail.com>
  10 ---
  11  arch/arm64/boot/dts/qcom/ipq6018.dtsi | 23 +++++++++++++++++++++++
  12  1 file changed, 23 insertions(+)
  13
  14 --- a/arch/arm64/boot/dts/qcom/ipq6018.dtsi
  15 +++ b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
  16 @@ -264,6 +264,29 @@
  17                         reg = <0x0 0x01937000 0x0 0x21000>;
  18                 };
  19
  20 +               sdhc_1: mmc@7804000 {
  21 +                       compatible = "qcom,ipq6018-sdhci", "qcom,sdhci-msm-v5";
  22 +                       reg = <0x0 0x07804000 0x0 0x1000>,
  23 +                             <0x0 0x07805000 0x0 0x1000>,
  24 +                             <0x0 0x07808000 0x0 0x2000>;
  25 +                       reg-names = "hc", "cqhci", "ice";
  26 +
  27 +                       interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
  28 +                                    <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
  29 +                       interrupt-names = "hc_irq", "pwr_irq";
  30 +
  31 +                       clocks = <&gcc GCC_SDCC1_AHB_CLK>,
  32 +                                <&gcc GCC_SDCC1_APPS_CLK>,
  33 +                                <&xo>,
  34 +                                <&gcc GCC_SDCC1_ICE_CORE_CLK>;
  35 +                       clock-names = "iface", "core", "xo", "ice";
  36 +
  37 +                       resets = <&gcc GCC_SDCC1_BCR>;
  38 +                       supports-cqe;
  39 +                       bus-width = <8>;
  40 +                       status = "disabled";
  41 +               };
  42 +
  43                 blsp_dma: dma-controller@7884000 {
  44                         compatible = "qcom,bam-v1.7.0";
  45                         reg = <0x0 0x07884000 0x0 0x2b000>;