target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq8072-haze.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2
   3 /dts-v1/;
   4
   5 #include "ipq8074.dtsi"
   6 #include "ipq8074-hk-cpu.dtsi"
   7 #include "ipq8074-ess.dtsi"
   8 #include <dt-bindings/gpio/gpio.h>
   9 #include <dt-bindings/input/input.h>
  10 #include <dt-bindings/leds/common.h>
  11
  12 / {
  13         model = "prpl Foundation Haze";
  14         compatible = "prpl,haze", "qcom,ipq8074";
  15
  16         aliases {
  17                 serial0 = &blsp1_uart5;
  18                 /* Aliases are required by U-Boot to patch MAC addresses */
  19                 ethernet0 = &dp6_syn;
  20                 ethernet1 = &dp4;
  21                 ethernet2 = &dp3;
  22                 ethernet3 = &dp2;
  23                 label-mac-device = &dp6_syn;
  24         };
  25
  26         chosen {
  27                 stdout-path = "serial0:115200n8";
  28         };
  29
  30         keys {
  31                 compatible = "gpio-keys";
  32                 pinctrl-0 = <&button_pins>;
  33                 pinctrl-names = "default";
  34
  35                 wps-button {
  36                         label = "wps";
  37                         gpios = <&tlmm 42 GPIO_ACTIVE_LOW>;
  38                         linux,code = <KEY_WPS_BUTTON>;
  39                 };
  40
  41                 reset-button {
  42                         label = "reset";
  43                         gpios = <&tlmm 44 GPIO_ACTIVE_LOW>;
  44                         linux,code = <KEY_RESTART>;
  45                 };
  46         };
  47 };
  48
  49 &tlmm {
  50         mdio_pins: mdio-state {
  51                 mdc-pins {
  52                         pins = "gpio68";
  53                         function = "mdc";
  54                         drive-strength = <8>;
  55                         bias-pull-up;
  56                 };
  57
  58                 mdio-pins {
  59                         pins = "gpio69";
  60                         function = "mdio";
  61                         drive-strength = <8>;
  62                         bias-pull-up;
  63                 };
  64         };
  65
  66         button_pins: button-state {
  67                 wps-pins {
  68                         pins = "gpio42";
  69                         function = "gpio";
  70                         drive-strength = <8>;
  71                         bias-pull-up;
  72                 };
  73
  74                 rst-pins {
  75                         pins = "gpio44";
  76                         function = "gpio";
  77                         drive-strength = <8>;
  78                         bias-pull-up;
  79                 };
  80         };
  81 };
  82
  83 &blsp1_uart5 {
  84         status = "okay";
  85 };
  86
  87 &prng {
  88         status = "okay";
  89 };
  90
  91 &ssphy_0 {
  92         status = "okay";
  93 };
  94
  95 &qusb_phy_0 {
  96         status = "okay";
  97 };
  98
  99 &ssphy_1 {
 100         status = "okay";
 101 };
 102
 103 &qusb_phy_1 {
 104         status = "okay";
 105 };
 106
 107 &usb_0 {
 108         status = "okay";
 109 };
 110
 111 &usb_1 {
 112         status = "okay";
 113 };
 114
 115 &cryptobam {
 116         status = "okay";
 117 };
 118
 119 &crypto {
 120         status = "okay";
 121 };
 122
 123 &qpic_bam {
 124         status = "okay";
 125 };
 126
 127 &blsp1_spi1 { /* BLSP1 QUP1 */
 128         pinctrl-0 = <&spi_0_pins>;
 129         pinctrl-names = "default";
 130         cs-gpios = <0>;
 131         status = "okay";
 132
 133         flash@0 {
 134                 #address-cells = <1>;
 135                 #size-cells = <1>;
 136                 reg = <0>;
 137                 compatible = "jedec,spi-nor";
 138                 spi-max-frequency = <50000000>;
 139
 140                 partitions {
 141                         compatible = "qcom,smem-part";
 142                 };
 143         };
 144 };
 145
 146 &mdio {
 147         status = "okay";
 148
 149         pinctrl-0 = <&mdio_pins>;
 150         pinctrl-names = "default";
 151         reset-gpios = <&tlmm 22 GPIO_ACTIVE_LOW>;
 152
 153         qca8075_1: ethernet-phy@0 {
 154                 compatible = "ethernet-phy-ieee802.3-c22";
 155                 reg = <0>;
 156         };
 157
 158         qca8075_2: ethernet-phy@1 {
 159                 compatible = "ethernet-phy-ieee802.3-c22";
 160                 reg = <1>;
 161         };
 162
 163         qca8075_3: ethernet-phy@2 {
 164                 compatible = "ethernet-phy-ieee802.3-c22";
 165                 reg = <2>;
 166         };
 167
 168         qca8075_4: ethernet-phy@3 {
 169                 compatible = "ethernet-phy-ieee802.3-c22";
 170                 reg = <3>;
 171         };
 172
 173         aqr113c: ethernet-phy@5 {
 174                 compatible ="ethernet-phy-ieee802.3-c45";
 175                 reg = <8>;
 176                 reset-gpios = <&tlmm 43 GPIO_ACTIVE_LOW>;
 177         };
 178 };
 179
 180 &sdhc_1 {
 181         status = "okay";
 182
 183         vqmmc-supply = <&l11>;
 184 };
 185
 186 &switch {
 187         status = "okay";
 188
 189         switch_lan_bmp = <(ESS_PORT1 | ESS_PORT2 | ESS_PORT3 | ESS_PORT4)>; /* lan port bitmap */
 190         switch_wan_bmp = <ESS_PORT6>; /* wan port bitmap */
 191         switch_mac_mode = <MAC_MODE_PSGMII>; /* mac mode for uniphy instance0*/
 192         switch_mac_mode1 = <MAC_MODE_10GBASE_R>; /* mac mode for uniphy instance1*/
 193         switch_mac_mode2 = <MAC_MODE_USXGMII>; /* mac mode for uniphy instance2*/
 194
 195         qcom,port_phyinfo {
 196                 port@0 {
 197                         port_id = <1>;
 198                         phy_address = <0>;
 199                 };
 200                 port@1 {
 201                         port_id = <2>;
 202                         phy_address = <1>;
 203                 };
 204                 port@2 {
 205                         port_id = <3>;
 206                         phy_address = <2>;
 207                 };
 208                 port@3 {
 209                         port_id = <4>;
 210                         phy_address = <3>;
 211                 };
 212                 port@4 {
 213                         port_id = <6>;
 214                         phy_address = <8>;
 215                         compatible = "ethernet-phy-ieee802.3-c45";
 216                         ethernet-phy-ieee802.3-c45;
 217                 };
 218         };
 219 };
 220
 221 &edma {
 222         status = "okay";
 223 };
 224
 225 /* Dummy LAN port */
 226 &dp1 {
 227         status = "disabled";
 228         phy-handle = <&qca8075_1>;
 229         label = "lan4";
 230 };
 231
 232 &dp2 {
 233         status = "okay";
 234         phy-handle = <&qca8075_2>;
 235         label = "lan3";
 236 };
 237
 238 &dp3 {
 239         status = "okay";
 240         phy-handle = <&qca8075_3>;
 241         label = "lan2";
 242 };
 243
 244 &dp4 {
 245         status = "okay";
 246         phy-handle = <&qca8075_4>;
 247         label = "lan1";
 248 };
 249
 250 &dp6_syn {
 251         status = "okay";
 252         qcom,mactype = <1>;
 253         phy-handle = <&aqr113c>;
 254         label = "wan";
 255 };
 256
 257 &pcie_qmp0 {
 258         status = "okay";
 259 };
 260
 261 &pcie0 {
 262         status = "okay";
 263
 264         perst-gpio = <&tlmm 58 GPIO_ACTIVE_LOW>;
 265
 266         bridge@0,0 {
 267                 reg = <0x00020000 0 0 0 0>;
 268                 #address-cells = <3>;
 269                 #size-cells = <2>;
 270                 ranges;
 271         };
 272 };
 273
 274 &pcie_qmp1 {
 275         status = "okay";
 276 };
 277
 278 &pcie1 {
 279         status = "okay";
 280
 281         perst-gpio = <&tlmm 61 GPIO_ACTIVE_LOW>;
 282
 283         bridge@1,0 {
 284                 reg = <0x00010000 0 0 0 0>;
 285                 #address-cells = <3>;
 286                 #size-cells = <2>;
 287                 ranges;
 288
 289                 wifi@1,0 {
 290                         status = "okay";
 291
 292                         /* ath11k has no DT compatible for PCI cards */
 293                         compatible = "pci17cb,1104";
 294                         reg = <0x00010000 0 0 0 0>;
 295
 296                         qcom,ath11k-calibration-variant = "prpl-Haze";
 297                 };
 298         };
 299 };
 300
 301 &wifi {
 302         status = "okay";
 303
 304         qcom,ath11k-calibration-variant = "prpl-Haze";
 305 };