target/linux/ath79/dts/qca9531_teltonika_rut300.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2 /dts-v1/;
   3
   4 #include <dt-bindings/gpio/gpio.h>
   5 #include <dt-bindings/input/input.h>
   6 #include "qca953x.dtsi"
   7
   8 / {
   9         compatible = "teltonika,rut300", "teltonika,rut30x", "qca,qca9531";
  10         model = "TELTONIKA RUT300";
  11
  12         aliases {
  13                 label-mac-device = &eth1;
  14                 led-boot = &led_wan;
  15                 led-failsafe = &led_wan;
  16                 led-running = &led_wan;
  17                 led-upgrade = &led_wan;
  18                 serial0 = &uart;
  19         };
  20
  21         leds {
  22                 compatible = "gpio-leds";
  23                 pinctrl-names = "default";
  24                 pinctrl-0 = <&pmx_leds_switch>, <&jtag_disable_pins>;
  25
  26                 led_wan: wan {
  27                         label = "yellow:wan";
  28                         gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
  29                 };
  30
  31                 lan1 {
  32                         label = "yellow:lan1";
  33                         gpios = <&gpio 4 GPIO_ACTIVE_HIGH>;
  34                 };
  35
  36                 lan2 {
  37                         label = "yellow:lan2";
  38                         gpios = <&gpio 3 GPIO_ACTIVE_HIGH>;
  39                 };
  40
  41                 lan3 {
  42                         label = "yellow:lan3";
  43                         gpios = <&gpio 2 GPIO_ACTIVE_HIGH>;
  44                 };
  45
  46                 lan4 {
  47                         label = "yellow:lan4";
  48                         gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
  49                 };
  50         };
  51
  52         keys {
  53                 compatible = "gpio-keys";
  54
  55                 reset {
  56                         label = "reset";
  57                         linux,code = <KEY_RESTART>;
  58                         gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
  59                 };
  60         };
  61 };
  62
  63 &spi {
  64         status = "okay";
  65         num-cs = <1>;
  66
  67         flash@0 {
  68                 compatible = "jedec,spi-nor";
  69                 reg = <0>;
  70                 spi-max-frequency = <25000000>;
  71
  72                 partitions {
  73                         compatible = "fixed-partitions";
  74                         #address-cells = <1>;
  75                         #size-cells = <1>;
  76
  77                         partition@0 {
  78                                 label = "u-boot";
  79                                 reg = <0x000000 0x020000>;
  80                                 read-only;
  81                         };
  82
  83                         config: partition@20000 {
  84                                 label = "config";
  85                                 reg = <0x020000 0x010000>;
  86                                 read-only;
  87
  88                                 nvmem-layout {
  89                                         compatible = "fixed-layout";
  90                                         #address-cells = <1>;
  91                                         #size-cells = <1>;
  92
  93                                         macaddr_config_0: macaddr@0 {
  94                                                 reg = <0x0 0x6>;
  95                                         };
  96                                 };
  97                         };
  98
  99                         partition@30000 {
 100                                 label = "art";
 101                                 reg = <0x030000 0x010000>;
 102                                 read-only;
 103                         };
 104
 105                         partition@40000 {
 106                                 compatible = "denx,uimage";
 107                                 label = "firmware";
 108                                 reg = <0x040000 0xf30000>;
 109                         };
 110
 111                         partition@f70000 {
 112                                 label = "event-log";
 113                                 reg = <0xf70000 0x090000>;
 114                         };
 115                 };
 116         };
 117 };
 118
 119 &usb0 {
 120         status = "okay";
 121 };
 122
 123 &usb_phy {
 124         status = "okay";
 125 };
 126
 127 &uart {
 128         status = "okay";
 129 };
 130
 131 &eth0 {
 132         status = "okay";
 133         phy-handle = <&swphy0>;
 134
 135         nvmem-cells = <&macaddr_config_0>;
 136         nvmem-cell-names = "mac-address";
 137         mac-address-increment = <1>;
 138 };
 139
 140 &eth1 {
 141         phy-handle = <&swphy4>;
 142         nvmem-cells = <&macaddr_config_0>;
 143         nvmem-cell-names = "mac-address";
 144
 145         gmac-config {
 146                 device = <&gmac>;
 147                 switch-phy-swap = <1>;
 148         };
 149 };
 150
 151 &pinmux {
 152         pmx_leds_switch: leds_switch {
 153                 // switch port LEDs on GPIO 0~4
 154                 pinctrl-single,bits =   <0x0 0x00000000 0xffffffff>,
 155                                         <0x4 0x00000000 0x000000ff>;
 156         };
 157 };