target/linux/ath79/dts/ar7161_fortinet_fap-220-b.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2
   3 #include "ar7100.dtsi"
   4 #include "arxxxx_fortinet_loader.dtsi"
   5
   6 #include <dt-bindings/gpio/gpio.h>
   7 #include <dt-bindings/input/input.h>
   8
   9 / {
  10         compatible = "fortinet,fap-220-b", "qca,ar7161";
  11         model = "Fortinet FAP-220-B";
  12
  13         chosen {
  14                 bootargs = "console=ttyS0,9600";
  15         };
  16
  17         aliases {
  18                 led-boot = &led_power;
  19                 led-failsafe = &led_power;
  20                 led-running = &led_power;
  21                 led-upgrade = &led_power;
  22                 label-mac-device = &eth1;
  23         };
  24
  25         keys {
  26                 compatible = "gpio-keys";
  27                 reset {
  28                         label = "reset";
  29                         linux,code = <KEY_RESTART>;
  30                         gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
  31                         debounce-interval = <60>;
  32                 };
  33         };
  34
  35         leds {
  36                 compatible = "gpio-leds";
  37
  38                 led_power: power-green {
  39                         label = "green:power";
  40                         gpios = <&gpio 4 GPIO_ACTIVE_HIGH>;
  41                         default-state = "on";
  42                 };
  43
  44                 status-green {
  45                         label = "green:status";
  46                         gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
  47                 };
  48
  49                 status-yellow {
  50                         label = "yellow:status";
  51                         gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
  52                         panic-indicator;
  53                 };
  54
  55                 mode-green {
  56                         label = "green:mode";
  57                         gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
  58                 };
  59
  60                 mode-yellow {
  61                         label = "yellow:mode";
  62                         gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
  63                 };
  64
  65                 wlan2g-green {
  66                         label = "green:wlan2g";
  67                         gpios = <&ath9k0 5 GPIO_ACTIVE_LOW>;
  68                         linux,default-trigger = "phy0tpt";
  69                 };
  70
  71                 wlan2g-yellow {
  72                         label = "yellow:wlan2g";
  73                         gpios = <&ath9k0 3 GPIO_ACTIVE_LOW>;
  74                         linux,default-trigger = "phy0assoc";
  75                 };
  76
  77                 wlan5g-green {
  78                         label = "green:wlan5g";
  79                         gpios = <&ath9k1 5 GPIO_ACTIVE_LOW>;
  80                         linux,default-trigger = "phy1tpt";
  81                 };
  82
  83                 wlan5g-yellow {
  84                         label = "yellow:wlan5g";
  85                         gpios = <&ath9k1 3 GPIO_ACTIVE_LOW>;
  86                         linux,default-trigger = "phy1assoc";
  87                 };
  88         };
  89
  90         virtual_flash {
  91                 devices = <&fwconcat0 &fwconcat1 &fwconcat2>;
  92         };
  93 };
  94
  95 &pcie0 {
  96         status = "okay";
  97
  98         ath9k0: wifi@0,11 { /* 2.4 GHz */
  99                 compatible = "pci168c,0029";
 100                 reg = <0x8800 0 0 0 0>;
 101                 ieee80211-freq-limit = <2402000 2482000>;
 102                 nvmem-cells = <&macaddr_uboot_3ff80 9>, <&cal_art_1000>;
 103                 nvmem-cell-names = "mac-address", "calibration";
 104                 #gpio-cells = <2>;
 105                 gpio-controller;
 106         };
 107
 108         ath9k1: wifi@0,12 { /* 5 GHz */
 109                 compatible = "pci168c,0029";
 110                 reg = <0x9000 0 0 0 0>;
 111                 ieee80211-freq-limit = <2402000 2482000 4900000 5990000>;
 112                 nvmem-cells = <&macaddr_uboot_3ff80 2>, <&cal_art_5000>;
 113                 nvmem-cell-names = "mac-address", "calibration";
 114                 #gpio-cells = <2>;
 115                 gpio-controller;
 116         };
 117 };
 118
 119 &mdio0 {
 120         status = "okay";
 121
 122         phy0: ethernet-phy@0 {
 123                 reg = <0x0>;
 124         };
 125 };
 126
 127 &eth0 {
 128         status = "okay";
 129         compatible = "syscon", "simple-mfd";
 130 };
 131
 132 &eth1 {
 133         status = "okay";
 134         nvmem-cells = <&macaddr_uboot_3ff80 0>;
 135         nvmem-cell-names = "mac-address";
 136
 137         pll-data = <0x00110000 0x00001099 0x00991099>;
 138         phy-handle = <&phy0>;
 139         phy-mode = "rgmii";
 140 };
 141
 142 &usb1 {
 143         status = "okay";
 144 };
 145
 146 &usb_phy {
 147         status = "okay";
 148 };
 149
 150 &art {
 151         nvmem-layout {
 152                 compatible = "fixed-layout";
 153                 #address-cells = <1>;
 154                 #size-cells = <1>;
 155
 156                 cal_art_1000: calibration@1000 {
 157                         reg = <0x1000 0xeb8>;
 158                 };
 159
 160                 cal_art_5000: calibration@5000 {
 161                         reg = <0x5000 0xeb8>;
 162                 };
 163         };
 164 };