pll-handle = <&pll>;
resets = <&rst 9>, <&rst 22>;
reset-names = "mac", "mdio";
+ clocks = <&pll ATH79_CLK_AHB>, <&pll ATH79_CLK_AHB>;
+ clock-names = "eth", "mdio";
};
&mdio1 {
ð1 {
compatible = "qca,ar9340-eth", "syscon";
- resets = <&rst 13>;
- reset-names = "mac";
+ resets = <&rst 13>, <&rst 23>;
+ reset-names = "mac", "mdio";
+ clocks = <&pll ATH79_CLK_AHB>, <&pll ATH79_CLK_AHB>;
+ clock-names = "eth", "mdio";
phy-mode = "gmii";
fixed-link {
interrupts = <4>;
phy-mode = "mii";
- mdio0: mdio-bus {
+ mdio0: mdio {
status = "disabled";
compatible = "qca,ath79-mdio";
interrupts = <5>;
phy-mode = "mii";
- mdio1: mdio-bus {
+ mdio1: mdio {
status = "disabled";
compatible = "qca,ath79-mdio";
--- /dev/null
+From 2cee757eaf5cc6175bc0ac7b0b808794124ec40a Mon Sep 17 00:00:00 2001
+From: Hauke Mehrtens <hauke@hauke-m.de>
+Date: Mon, 17 Feb 2020 23:40:14 +0100
+Subject: [PATCH 1/3] ag71xx: Handle allocation errors in ag71xx_rings_init()
+
+Free the allocated resources in ag71xx_rings_init() in case
+ag71xx_ring_rx_init() returns an error.
+
+This is only a potential problem, I did not ran into this one.
+
+Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
+Fixes: d51b6ce441d3 ("net: ethernet: add ag71xx driver")
+---
+ drivers/net/ethernet/atheros/ag71xx.c | 22 ++++++++++++++++++----
+ 1 file changed, 18 insertions(+), 4 deletions(-)
+
+--- a/drivers/net/ethernet/atheros/ag71xx.c
++++ b/drivers/net/ethernet/atheros/ag71xx.c
+@@ -1133,6 +1133,7 @@ static int ag71xx_rings_init(struct ag71
+ struct ag71xx_ring *tx = &ag->tx_ring;
+ struct ag71xx_ring *rx = &ag->rx_ring;
+ int ring_size, tx_size;
++ int ret;
+
+ ring_size = BIT(tx->order) + BIT(rx->order);
+ tx_size = BIT(tx->order);
+@@ -1145,9 +1146,8 @@ static int ag71xx_rings_init(struct ag71
+ ring_size * AG71XX_DESC_SIZE,
+ &tx->descs_dma, GFP_KERNEL);
+ if (!tx->descs_cpu) {
+- kfree(tx->buf);
+- tx->buf = NULL;
+- return -ENOMEM;
++ ret = -ENOMEM;
++ goto err_free_buf;
+ }
+
+ rx->buf = &tx->buf[tx_size];
+@@ -1155,7 +1155,21 @@ static int ag71xx_rings_init(struct ag71
+ rx->descs_dma = tx->descs_dma + tx_size * AG71XX_DESC_SIZE;
+
+ ag71xx_ring_tx_init(ag);
+- return ag71xx_ring_rx_init(ag);
++ ret = ag71xx_ring_rx_init(ag);
++ if (ret)
++ goto err_free_dma;
++
++ return 0;
++
++err_free_dma:
++ dma_free_coherent(&ag->pdev->dev, ring_size * AG71XX_DESC_SIZE,
++ tx->descs_cpu, tx->descs_dma);
++ rx->buf = NULL;
++err_free_buf:
++ kfree(tx->buf);
++ tx->buf = NULL;
++
++ return ret;
+ }
+
+ static void ag71xx_rings_free(struct ag71xx *ag)
--- /dev/null
+From 2f8c5a68d0030ae5e65fca1bf5ca44929d5b3b06 Mon Sep 17 00:00:00 2001
+From: Hauke Mehrtens <hauke@hauke-m.de>
+Date: Mon, 17 Feb 2020 23:50:23 +0100
+Subject: [PATCH 2/3] ag71xx: Call ag71xx_hw_disable() in case phy_conenct
+ fails
+
+When the ag71xx_phy_connect() failed only parts of the actions done
+previously in this function wrere reverted, because only
+ag71xx_rings_cleanup() was called. My system crashed the next time
+open() was called because napi_disable() was not called again and this
+resulted in two calls to napi_enable(), which is not allowed.
+
+Fix this by disabling the device again.
+
+Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
+Fixes: d51b6ce441d3 ("net: ethernet: add ag71xx driver")
+---
+ drivers/net/ethernet/atheros/ag71xx.c | 8 ++++----
+ 1 file changed, 4 insertions(+), 4 deletions(-)
+
+--- a/drivers/net/ethernet/atheros/ag71xx.c
++++ b/drivers/net/ethernet/atheros/ag71xx.c
+@@ -1263,18 +1263,18 @@ static int ag71xx_open(struct net_device
+
+ ret = ag71xx_hw_enable(ag);
+ if (ret)
+- goto err;
++ return ret;
+
+ ret = ag71xx_phy_connect(ag);
+ if (ret)
+- goto err;
++ goto err_hw_disable;
+
+ phy_start(ndev->phydev);
+
+ return 0;
+
+-err:
+- ag71xx_rings_cleanup(ag);
++err_hw_disable:
++ ag71xx_hw_disable(ag);
+ return ret;
+ }
+
--- /dev/null
+From d42c6bf2752a46bdf3931bd6e56db419742fbb20 Mon Sep 17 00:00:00 2001
+From: Hauke Mehrtens <hauke@hauke-m.de>
+Date: Mon, 17 Feb 2020 23:55:22 +0100
+Subject: [PATCH 3/3] ag71xx: Run ag71xx_link_adjust() only when needed
+
+My system printed this line every second:
+ ag71xx 19000000.eth eth0: Link is Up - 1Gbps/Full - flow control off
+The function ag71xx_phy_link_adjust() was called by the PHY layer every
+second even when nothing changed.
+
+With this patch the old status is stored and the real
+ag71xx_link_adjust() function is only called when when something really
+changed. This way the update and also this print is only done once any
+more.
+
+Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
+Fixes: d51b6ce441d3 ("net: ethernet: add ag71xx driver")
+---
+ drivers/net/ethernet/atheros/ag71xx.c | 24 +++++++++++++++++++++++-
+ 1 file changed, 23 insertions(+), 1 deletion(-)
+
+--- a/drivers/net/ethernet/atheros/ag71xx.c
++++ b/drivers/net/ethernet/atheros/ag71xx.c
+@@ -307,6 +307,10 @@ struct ag71xx {
+ u32 msg_enable;
+ const struct ag71xx_dcfg *dcfg;
+
++ unsigned int link;
++ unsigned int speed;
++ int duplex;
++
+ /* From this point onwards we're not looking at per-packet fields. */
+ void __iomem *mac_base;
+
+@@ -854,6 +858,7 @@ static void ag71xx_link_adjust(struct ag
+
+ if (!phydev->link && update) {
+ ag71xx_hw_stop(ag);
++ phy_print_status(phydev);
+ return;
+ }
+
+@@ -907,8 +912,25 @@ static void ag71xx_link_adjust(struct ag
+ static void ag71xx_phy_link_adjust(struct net_device *ndev)
+ {
+ struct ag71xx *ag = netdev_priv(ndev);
++ struct phy_device *phydev = ndev->phydev;
++ int status_change = 0;
++
++ if (phydev->link) {
++ if (ag->duplex != phydev->duplex
++ || ag->speed != phydev->speed) {
++ status_change = 1;
++ }
++ }
++
++ if (phydev->link != ag->link)
++ status_change = 1;
++
++ ag->link = phydev->link;
++ ag->duplex = phydev->duplex;
++ ag->speed = phydev->speed;
+
+- ag71xx_link_adjust(ag, true);
++ if (status_change)
++ ag71xx_link_adjust(ag, true);
+ }
+
+ static int ag71xx_phy_connect(struct ag71xx *ag)
projects / openwrt / staging / jogo.git / commitdiff