bcm4908: backport v6.4 pending DTS changes
authorRafał Miłecki <rafal@milecki.pl>
Thu, 16 Mar 2023 19:28:47 +0000 (20:28 +0100)
committerRafał Miłecki <rafal@milecki.pl>
Thu, 16 Mar 2023 21:02:25 +0000 (22:02 +0100)
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
18 files changed:
target/linux/bcm4908/patches-5.10/039-v6.2-0003-arm64-dts-Update-cache-properties-for-broadcom.patch [new file with mode: 0644]
target/linux/bcm4908/patches-5.10/040-v6.4-0001-arm64-dts-broadcom-bcmbca-Add-spi-controller-node.patch [new file with mode: 0644]
target/linux/bcm4908/patches-5.10/040-v6.4-0002-arm64-dts-broadcom-bcmbca-bcm4908-fix-NAND-interrupt.patch [new file with mode: 0644]
target/linux/bcm4908/patches-5.10/040-v6.4-0003-arm64-dts-broadcom-bcmbca-bcm4908-fix-LED-nodenames.patch [new file with mode: 0644]
target/linux/bcm4908/patches-5.10/040-v6.4-0004-arm64-dts-broadcom-bcmbca-bcm4908-fix-procmon-nodena.patch [new file with mode: 0644]
target/linux/bcm4908/patches-5.10/040-v6.4-0005-arm64-dts-broadcom-bcmbca-bcm4908-add-on-SoC-USB-por.patch [new file with mode: 0644]
target/linux/bcm4908/patches-5.10/040-v6.4-0006-arm64-dts-broadcom-bcmbca-bcm4908-add-Netgear-R8000P.patch [new file with mode: 0644]
target/linux/bcm4908/patches-5.10/040-v6.4-0007-arm64-dts-broadcom-bcmbca-bcm4908-add-TP-Link-C2300-.patch [new file with mode: 0644]
target/linux/bcm4908/patches-5.10/300-arm64-dts-broadcom-bcmbca-bcm4908-limit-amount-of-GP.patch
target/linux/bcm4908/patches-5.15/035-v6.2-0003-arm64-dts-Update-cache-properties-for-broadcom.patch [new file with mode: 0644]
target/linux/bcm4908/patches-5.15/036-v6.4-0001-arm64-dts-broadcom-bcmbca-Add-spi-controller-node.patch [new file with mode: 0644]
target/linux/bcm4908/patches-5.15/036-v6.4-0002-arm64-dts-broadcom-bcmbca-bcm4908-fix-NAND-interrupt.patch [new file with mode: 0644]
target/linux/bcm4908/patches-5.15/036-v6.4-0003-arm64-dts-broadcom-bcmbca-bcm4908-fix-LED-nodenames.patch [new file with mode: 0644]
target/linux/bcm4908/patches-5.15/036-v6.4-0004-arm64-dts-broadcom-bcmbca-bcm4908-fix-procmon-nodena.patch [new file with mode: 0644]
target/linux/bcm4908/patches-5.15/036-v6.4-0005-arm64-dts-broadcom-bcmbca-bcm4908-add-on-SoC-USB-por.patch [new file with mode: 0644]
target/linux/bcm4908/patches-5.15/036-v6.4-0006-arm64-dts-broadcom-bcmbca-bcm4908-add-Netgear-R8000P.patch [new file with mode: 0644]
target/linux/bcm4908/patches-5.15/036-v6.4-0007-arm64-dts-broadcom-bcmbca-bcm4908-add-TP-Link-C2300-.patch [new file with mode: 0644]
target/linux/bcm4908/patches-5.15/300-arm64-dts-broadcom-bcmbca-bcm4908-limit-amount-of-GP.patch

diff --git a/target/linux/bcm4908/patches-5.10/039-v6.2-0003-arm64-dts-Update-cache-properties-for-broadcom.patch b/target/linux/bcm4908/patches-5.10/039-v6.2-0003-arm64-dts-Update-cache-properties-for-broadcom.patch
new file mode 100644 (file)
index 0000000..a19ab8c
--- /dev/null
@@ -0,0 +1,134 @@
+From e567e58d6819adc002c57b81e16b88da24d3b4aa Mon Sep 17 00:00:00 2001
+From: Pierre Gondois <pierre.gondois@arm.com>
+Date: Tue, 22 Nov 2022 17:32:07 +0100
+Subject: [PATCH] arm64: dts: Update cache properties for broadcom
+
+The DeviceTree Specification v0.3 specifies that the cache node
+'compatible' and 'cache-level' properties are 'required'. Cf.
+s3.8 Multi-level and Shared Cache Nodes
+The 'cache-unified' property should be present if one of the
+properties for unified cache is present ('cache-size', ...).
+
+Update the Device Trees accordingly.
+
+Acked-by: William Zhang <william.zhang@broadcom.com>
+Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
+Link: https://lore.kernel.org/r/20221122163208.3810985-3-pierre.gondois@arm.com
+Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
+---
+ arch/arm64/boot/dts/broadcom/bcmbca/bcm4908.dtsi    | 1 +
+ arch/arm64/boot/dts/broadcom/bcmbca/bcm4912.dtsi    | 1 +
+ arch/arm64/boot/dts/broadcom/bcmbca/bcm63146.dtsi   | 1 +
+ arch/arm64/boot/dts/broadcom/bcmbca/bcm63158.dtsi   | 1 +
+ arch/arm64/boot/dts/broadcom/bcmbca/bcm6813.dtsi    | 1 +
+ arch/arm64/boot/dts/broadcom/bcmbca/bcm6856.dtsi    | 1 +
+ arch/arm64/boot/dts/broadcom/bcmbca/bcm6858.dtsi    | 1 +
+ arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi    | 1 +
+ arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi | 4 ++++
+ 9 files changed, 12 insertions(+)
+
+--- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908.dtsi
++++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908.dtsi
+@@ -63,6 +63,7 @@
+               l2: l2-cache0 {
+                       compatible = "cache";
++                      cache-level = <2>;
+               };
+       };
+--- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm4912.dtsi
++++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4912.dtsi
+@@ -51,6 +51,7 @@
+               L2_0: l2-cache0 {
+                       compatible = "cache";
++                      cache-level = <2>;
+               };
+       };
+--- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm63146.dtsi
++++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm63146.dtsi
+@@ -35,6 +35,7 @@
+               L2_0: l2-cache0 {
+                       compatible = "cache";
++                      cache-level = <2>;
+               };
+       };
+--- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm63158.dtsi
++++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm63158.dtsi
+@@ -51,6 +51,7 @@
+               L2_0: l2-cache0 {
+                       compatible = "cache";
++                      cache-level = <2>;
+               };
+       };
+--- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm6813.dtsi
++++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm6813.dtsi
+@@ -51,6 +51,7 @@
+               L2_0: l2-cache0 {
+                       compatible = "cache";
++                      cache-level = <2>;
+               };
+       };
+--- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm6856.dtsi
++++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm6856.dtsi
+@@ -35,6 +35,7 @@
+               L2_0: l2-cache0 {
+                       compatible = "cache";
++                      cache-level = <2>;
+               };
+       };
+--- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm6858.dtsi
++++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm6858.dtsi
+@@ -50,6 +50,7 @@
+               };
+               L2_0: l2-cache0 {
+                       compatible = "cache";
++                      cache-level = <2>;
+               };
+       };
+--- a/arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi
++++ b/arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi
+@@ -79,6 +79,7 @@
+               CLUSTER0_L2: l2-cache@0 {
+                       compatible = "cache";
++                      cache-level = <2>;
+               };
+       };
+--- a/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi
++++ b/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi
+@@ -108,18 +108,22 @@
+               CLUSTER0_L2: l2-cache@0 {
+                       compatible = "cache";
++                      cache-level = <2>;
+               };
+               CLUSTER1_L2: l2-cache@100 {
+                       compatible = "cache";
++                      cache-level = <2>;
+               };
+               CLUSTER2_L2: l2-cache@200 {
+                       compatible = "cache";
++                      cache-level = <2>;
+               };
+               CLUSTER3_L2: l2-cache@300 {
+                       compatible = "cache";
++                      cache-level = <2>;
+               };
+       };
diff --git a/target/linux/bcm4908/patches-5.10/040-v6.4-0001-arm64-dts-broadcom-bcmbca-Add-spi-controller-node.patch b/target/linux/bcm4908/patches-5.10/040-v6.4-0001-arm64-dts-broadcom-bcmbca-Add-spi-controller-node.patch
new file mode 100644 (file)
index 0000000..e8e1228
--- /dev/null
@@ -0,0 +1,367 @@
+From f5d83b714e304d5f3229da434af2eeea033c4f5d Mon Sep 17 00:00:00 2001
+From: William Zhang <william.zhang@broadcom.com>
+Date: Mon, 6 Feb 2023 22:58:15 -0800
+Subject: [PATCH] arm64: dts: broadcom: bcmbca: Add spi controller node
+
+Add support for HSSPI controller in ARMv8 chip dts files.
+
+Signed-off-by: William Zhang <william.zhang@broadcom.com>
+Link: https://lore.kernel.org/r/20230207065826.285013-5-william.zhang@broadcom.com
+Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
+---
+ .../boot/dts/broadcom/bcmbca/bcm4908.dtsi     | 18 +++++++++++++++++
+ .../boot/dts/broadcom/bcmbca/bcm4912.dtsi     | 20 +++++++++++++++++++
+ .../boot/dts/broadcom/bcmbca/bcm63146.dtsi    | 19 ++++++++++++++++++
+ .../boot/dts/broadcom/bcmbca/bcm63158.dtsi    | 19 ++++++++++++++++++
+ .../boot/dts/broadcom/bcmbca/bcm6813.dtsi     | 20 +++++++++++++++++++
+ .../boot/dts/broadcom/bcmbca/bcm6856.dtsi     | 18 +++++++++++++++++
+ .../boot/dts/broadcom/bcmbca/bcm6858.dtsi     | 18 +++++++++++++++++
+ .../boot/dts/broadcom/bcmbca/bcm94908.dts     |  4 ++++
+ .../boot/dts/broadcom/bcmbca/bcm94912.dts     |  4 ++++
+ .../boot/dts/broadcom/bcmbca/bcm963146.dts    |  4 ++++
+ .../boot/dts/broadcom/bcmbca/bcm963158.dts    |  4 ++++
+ .../boot/dts/broadcom/bcmbca/bcm96813.dts     |  4 ++++
+ .../boot/dts/broadcom/bcmbca/bcm96856.dts     |  4 ++++
+ .../boot/dts/broadcom/bcmbca/bcm96858.dts     |  4 ++++
+ 14 files changed, 160 insertions(+)
+
+--- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908.dtsi
++++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908.dtsi
+@@ -107,6 +107,12 @@
+                       clock-frequency = <50000000>;
+                       clock-output-names = "periph";
+               };
++
++              hsspi_pll: hsspi-pll {
++                      compatible = "fixed-clock";
++                      #clock-cells = <0>;
++                      clock-frequency = <400000000>;
++              };
+       };
+       soc {
+@@ -531,6 +537,18 @@
+                       #size-cells = <0>;
+               };
++              hsspi: spi@1000{
++                      #address-cells = <1>;
++                      #size-cells = <0>;
++                      compatible = "brcm,bcm4908-hsspi", "brcm,bcmbca-hsspi-v1.0";
++                      reg = <0x1000 0x600>;
++                      interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
++                      clocks = <&hsspi_pll &hsspi_pll>;
++                      clock-names = "hsspi", "pll";
++                      num-cs = <8>;
++                      status = "disabled";
++              };
++
+               nand-controller@1800 {
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+--- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm4912.dtsi
++++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4912.dtsi
+@@ -79,6 +79,7 @@
+                       #clock-cells = <0>;
+                       clock-frequency = <200000000>;
+               };
++
+               uart_clk: uart-clk {
+                       compatible = "fixed-factor-clock";
+                       #clock-cells = <0>;
+@@ -86,6 +87,12 @@
+                       clock-div = <4>;
+                       clock-mult = <1>;
+               };
++
++              hsspi_pll: hsspi-pll {
++                      compatible = "fixed-clock";
++                      #clock-cells = <0>;
++                      clock-frequency = <200000000>;
++              };
+       };
+       psci {
+@@ -117,6 +124,19 @@
+               #size-cells = <1>;
+               ranges = <0x0 0x0 0xff800000 0x800000>;
++              hsspi: spi@1000 {
++                      #address-cells = <1>;
++                      #size-cells = <0>;
++                      compatible = "brcm,bcm4912-hsspi", "brcm,bcmbca-hsspi-v1.1";
++                      reg = <0x1000 0x600>, <0x2610 0x4>;
++                      reg-names = "hsspi", "spim-ctrl";
++                      interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
++                      clocks = <&hsspi_pll &hsspi_pll>;
++                      clock-names = "hsspi", "pll";
++                      num-cs = <8>;
++                      status = "disabled";
++              };
++
+               uart0: serial@12000 {
+                       compatible = "arm,pl011", "arm,primecell";
+                       reg = <0x12000 0x1000>;
+--- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm63146.dtsi
++++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm63146.dtsi
+@@ -60,6 +60,7 @@
+                       #clock-cells = <0>;
+                       clock-frequency = <200000000>;
+               };
++
+               uart_clk: uart-clk {
+                       compatible = "fixed-factor-clock";
+                       #clock-cells = <0>;
+@@ -67,6 +68,12 @@
+                       clock-div = <4>;
+                       clock-mult = <1>;
+               };
++
++              hsspi_pll: hsspi-pll {
++                      compatible = "fixed-clock";
++                      #clock-cells = <0>;
++                      clock-frequency = <200000000>;
++              };
+       };
+       psci {
+@@ -99,6 +106,18 @@
+               #size-cells = <1>;
+               ranges = <0x0 0x0 0xff800000 0x800000>;
++              hsspi: spi@1000 {
++                      #address-cells = <1>;
++                      #size-cells = <0>;
++                      compatible = "brcm,bcm63146-hsspi", "brcm,bcmbca-hsspi-v1.0";
++                      reg = <0x1000 0x600>;
++                      interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
++                      clocks = <&hsspi_pll &hsspi_pll>;
++                      clock-names = "hsspi", "pll";
++                      num-cs = <8>;
++                      status = "disabled";
++              };
++
+               uart0: serial@12000 {
+                       compatible = "arm,pl011", "arm,primecell";
+                       reg = <0x12000 0x1000>;
+--- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm63158.dtsi
++++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm63158.dtsi
+@@ -79,6 +79,7 @@
+                       #clock-cells = <0>;
+                       clock-frequency = <200000000>;
+               };
++
+               uart_clk: uart-clk {
+                       compatible = "fixed-factor-clock";
+                       #clock-cells = <0>;
+@@ -86,6 +87,12 @@
+                       clock-div = <4>;
+                       clock-mult = <1>;
+               };
++
++              hsspi_pll: hsspi-pll {
++                      compatible = "fixed-clock";
++                      #clock-cells = <0>;
++                      clock-frequency = <400000000>;
++              };
+       };
+       psci {
+@@ -117,6 +124,18 @@
+               #size-cells = <1>;
+               ranges = <0x0 0x0 0xff800000 0x800000>;
++              hsspi: spi@1000 {
++                      #address-cells = <1>;
++                      #size-cells = <0>;
++                      compatible = "brcm,bcm63158-hsspi", "brcm,bcmbca-hsspi-v1.0";
++                      reg = <0x1000 0x600>;
++                      interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
++                      clocks = <&hsspi_pll &hsspi_pll>;
++                      clock-names = "hsspi", "pll";
++                      num-cs = <8>;
++                      status = "disabled";
++              };
++
+               uart0: serial@12000 {
+                       compatible = "arm,pl011", "arm,primecell";
+                       reg = <0x12000 0x1000>;
+--- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm6813.dtsi
++++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm6813.dtsi
+@@ -79,6 +79,7 @@
+                       #clock-cells = <0>;
+                       clock-frequency = <200000000>;
+               };
++
+               uart_clk: uart-clk {
+                       compatible = "fixed-factor-clock";
+                       #clock-cells = <0>;
+@@ -86,6 +87,12 @@
+                       clock-div = <4>;
+                       clock-mult = <1>;
+               };
++
++              hsspi_pll: hsspi-pll {
++                      compatible = "fixed-clock";
++                      #clock-cells = <0>;
++                      clock-frequency = <200000000>;
++              };
+       };
+       psci {
+@@ -117,6 +124,19 @@
+               #size-cells = <1>;
+               ranges = <0x0 0x0 0xff800000 0x800000>;
++              hsspi: spi@1000 {
++                      #address-cells = <1>;
++                      #size-cells = <0>;
++                      compatible = "brcm,bcm6813-hsspi", "brcm,bcmbca-hsspi-v1.1";
++                      reg = <0x1000 0x600>, <0x2610 0x4>;
++                      reg-names = "hsspi", "spim-ctrl";
++                      interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
++                      clocks = <&hsspi_pll &hsspi_pll>;
++                      clock-names = "hsspi", "pll";
++                      num-cs = <8>;
++                      status = "disabled";
++              };
++
+               uart0: serial@12000 {
+                       compatible = "arm,pl011", "arm,primecell";
+                       reg = <0x12000 0x1000>;
+--- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm6856.dtsi
++++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm6856.dtsi
+@@ -60,6 +60,12 @@
+                       #clock-cells = <0>;
+                       clock-frequency = <200000000>;
+               };
++
++              hsspi_pll: hsspi-pll {
++                      compatible = "fixed-clock";
++                      #clock-cells = <0>;
++                      clock-frequency = <400000000>;
++              };
+       };
+       psci {
+@@ -100,5 +106,17 @@
+                       clock-names = "refclk";
+                       status = "disabled";
+               };
++
++              hsspi: spi@1000 {
++                      #address-cells = <1>;
++                      #size-cells = <0>;
++                      compatible = "brcm,bcm6856-hsspi", "brcm,bcmbca-hsspi-v1.0";
++                      reg = <0x1000 0x600>;
++                      interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
++                      clocks = <&hsspi_pll &hsspi_pll>;
++                      clock-names = "hsspi", "pll";
++                      num-cs = <8>;
++                      status = "disabled";
++              };
+       };
+ };
+--- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm6858.dtsi
++++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm6858.dtsi
+@@ -78,6 +78,12 @@
+                       #clock-cells = <0>;
+                       clock-frequency = <200000000>;
+               };
++
++              hsspi_pll: hsspi-pll {
++                      compatible = "fixed-clock";
++                      #clock-cells = <0>;
++                      clock-frequency = <400000000>;
++              };
+       };
+       psci {
+@@ -137,5 +143,17 @@
+                       clock-names = "refclk";
+                       status = "disabled";
+               };
++
++              hsspi: spi@1000 {
++                      #address-cells = <1>;
++                      #size-cells = <0>;
++                      compatible = "brcm,bcm6858-hsspi", "brcm,bcmbca-hsspi-v1.0";
++                      reg = <0x1000 0x600>;
++                      interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
++                      clocks = <&hsspi_pll &hsspi_pll>;
++                      clock-names = "hsspi", "pll";
++                      num-cs = <8>;
++                      status = "disabled";
++              };
+       };
+ };
+--- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm94908.dts
++++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm94908.dts
+@@ -28,3 +28,7 @@
+ &uart0 {
+       status = "okay";
+ };
++
++&hsspi {
++      status = "okay";
++};
+--- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm94912.dts
++++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm94912.dts
+@@ -28,3 +28,7 @@
+ &uart0 {
+       status = "okay";
+ };
++
++&hsspi {
++      status = "okay";
++};
+--- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm963146.dts
++++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm963146.dts
+@@ -28,3 +28,7 @@
+ &uart0 {
+       status = "okay";
+ };
++
++&hsspi {
++      status = "okay";
++};
+--- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm963158.dts
++++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm963158.dts
+@@ -28,3 +28,7 @@
+ &uart0 {
+       status = "okay";
+ };
++
++&hsspi {
++      status = "okay";
++};
+--- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm96813.dts
++++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm96813.dts
+@@ -28,3 +28,7 @@
+ &uart0 {
+       status = "okay";
+ };
++
++&hsspi {
++      status = "okay";
++};
+--- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm96856.dts
++++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm96856.dts
+@@ -28,3 +28,7 @@
+ &uart0 {
+       status = "okay";
+ };
++
++&hsspi {
++      status = "okay";
++};
+--- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm96858.dts
++++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm96858.dts
+@@ -28,3 +28,7 @@
+ &uart0 {
+       status = "okay";
+ };
++
++&hsspi {
++      status = "okay";
++};
diff --git a/target/linux/bcm4908/patches-5.10/040-v6.4-0002-arm64-dts-broadcom-bcmbca-bcm4908-fix-NAND-interrupt.patch b/target/linux/bcm4908/patches-5.10/040-v6.4-0002-arm64-dts-broadcom-bcmbca-bcm4908-fix-NAND-interrupt.patch
new file mode 100644 (file)
index 0000000..b121200
--- /dev/null
@@ -0,0 +1,33 @@
+From 5cca02449490e767289bda38db1577e2c375c084 Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
+Date: Tue, 28 Feb 2023 15:43:58 +0100
+Subject: [PATCH] arm64: dts: broadcom: bcmbca: bcm4908: fix NAND interrupt
+ name
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+This fixes:
+arch/arm64/boot/dts/broadcom/bcmbca/bcm94908.dtb: nand-controller@1800: interrupt-names:0: 'nand_ctlrdy' was expected
+        From schema: Documentation/devicetree/bindings/mtd/brcm,brcmnand.yaml
+arch/arm64/boot/dts/broadcom/bcmbca/bcm94908.dtb: nand-controller@1800: Unevaluated properties are not allowed ('interrupt-names' was unexpected)
+        From schema: Documentation/devicetree/bindings/mtd/brcm,brcmnand.yaml
+
+Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
+Link: https://lore.kernel.org/all/20230228144400.21689-1-zajec5@gmail.com/
+Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
+---
+ arch/arm64/boot/dts/broadcom/bcmbca/bcm4908.dtsi | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+--- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908.dtsi
++++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908.dtsi
+@@ -556,7 +556,7 @@
+                       reg = <0x1800 0x600>, <0x2000 0x10>;
+                       reg-names = "nand", "nand-int-base";
+                       interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+-                      interrupt-names = "nand";
++                      interrupt-names = "nand_ctlrdy";
+                       status = "okay";
+                       nandcs: nand@0 {
diff --git a/target/linux/bcm4908/patches-5.10/040-v6.4-0003-arm64-dts-broadcom-bcmbca-bcm4908-fix-LED-nodenames.patch b/target/linux/bcm4908/patches-5.10/040-v6.4-0003-arm64-dts-broadcom-bcmbca-bcm4908-fix-LED-nodenames.patch
new file mode 100644 (file)
index 0000000..7ce17c1
--- /dev/null
@@ -0,0 +1,66 @@
+From 23be9f68f933adee8163b8efc9c6bff71410cc7c Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
+Date: Tue, 28 Feb 2023 15:43:59 +0100
+Subject: [PATCH] arm64: dts: broadcom: bcmbca: bcm4908: fix LED nodenames
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+This fixes:
+arch/arm64/boot/dts/broadcom/bcmbca/bcm4908-asus-gt-ac5300.dtb: leds@800: 'led-lan@19', 'led-power@11', 'led-wan-red@12', 'led-wan-white@15', 'led-wps@14' do not match any of the regexes: '^led@[a-f0-9]+$', 'pinctrl-[0-9]+'
+        From schema: Documentation/devicetree/bindings/leds/leds-bcm63138.yaml
+
+Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
+Link: https://lore.kernel.org/all/20230228144400.21689-2-zajec5@gmail.com/
+Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
+---
+ .../dts/broadcom/bcmbca/bcm4908-asus-gt-ac5300.dts     | 10 +++++-----
+ 1 file changed, 5 insertions(+), 5 deletions(-)
+
+--- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908-asus-gt-ac5300.dts
++++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908-asus-gt-ac5300.dts
+@@ -120,7 +120,7 @@
+ };
+ &leds {
+-      led-power@11 {
++      led@11 {
+               reg = <0x11>;
+               function = LED_FUNCTION_POWER;
+               color = <LED_COLOR_ID_WHITE>;
+@@ -130,7 +130,7 @@
+               pinctrl-0 = <&pins_led_17_a>;
+       };
+-      led-wan-red@12 {
++      led@12 {
+               reg = <0x12>;
+               function = LED_FUNCTION_WAN;
+               color = <LED_COLOR_ID_RED>;
+@@ -139,7 +139,7 @@
+               pinctrl-0 = <&pins_led_18_a>;
+       };
+-      led-wps@14 {
++      led@14 {
+               reg = <0x14>;
+               function = LED_FUNCTION_WPS;
+               color = <LED_COLOR_ID_WHITE>;
+@@ -148,7 +148,7 @@
+               pinctrl-0 = <&pins_led_20_a>;
+       };
+-      led-wan-white@15 {
++      led@15 {
+               reg = <0x15>;
+               function = LED_FUNCTION_WAN;
+               color = <LED_COLOR_ID_WHITE>;
+@@ -157,7 +157,7 @@
+               pinctrl-0 = <&pins_led_21_a>;
+       };
+-      led-lan@19 {
++      led@19 {
+               reg = <0x19>;
+               function = LED_FUNCTION_LAN;
+               color = <LED_COLOR_ID_WHITE>;
diff --git a/target/linux/bcm4908/patches-5.10/040-v6.4-0004-arm64-dts-broadcom-bcmbca-bcm4908-fix-procmon-nodena.patch b/target/linux/bcm4908/patches-5.10/040-v6.4-0004-arm64-dts-broadcom-bcmbca-bcm4908-fix-procmon-nodena.patch
new file mode 100644 (file)
index 0000000..a469a32
--- /dev/null
@@ -0,0 +1,30 @@
+From f16a8294dd7a02c7ad042cd2e3acc5ea06698dc1 Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
+Date: Tue, 28 Feb 2023 15:44:00 +0100
+Subject: [PATCH] arm64: dts: broadcom: bcmbca: bcm4908: fix procmon nodename
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+This fixes:
+arch/arm64/boot/dts/broadcom/bcmbca/bcm94908.dtb: syscon@280000: $nodename:0: 'syscon@280000' does not match '^([a-z][a-z0-9\\-]+-bus|bus|localbus|soc|axi|ahb|apb)(@.+)?$'
+        From schema: schemas/simple-bus.yaml
+
+Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
+Link: https://lore.kernel.org/all/20230228144400.21689-3-zajec5@gmail.com/
+Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
+---
+ arch/arm64/boot/dts/broadcom/bcmbca/bcm4908.dtsi | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+--- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908.dtsi
++++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908.dtsi
+@@ -260,7 +260,7 @@
+                       };
+               };
+-              procmon: syscon@280000 {
++              procmon: bus@280000 {
+                       compatible = "simple-bus";
+                       reg = <0x280000 0x1000>;
+                       ranges;
diff --git a/target/linux/bcm4908/patches-5.10/040-v6.4-0005-arm64-dts-broadcom-bcmbca-bcm4908-add-on-SoC-USB-por.patch b/target/linux/bcm4908/patches-5.10/040-v6.4-0005-arm64-dts-broadcom-bcmbca-bcm4908-add-on-SoC-USB-por.patch
new file mode 100644 (file)
index 0000000..47b2455
--- /dev/null
@@ -0,0 +1,81 @@
+From 477cad715de1dfc256a20da3ed83b62f3cb2944d Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
+Date: Tue, 28 Feb 2023 15:45:18 +0100
+Subject: [PATCH] arm64: dts: broadcom: bcmbca: bcm4908: add on-SoC USB ports
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+BCM4908 has 3 USB controllers each with 2 USB ports. Home routers often
+have LEDs indicating state of selected USB ports. Describe those SoC USB
+ports to allow using them as LED trigger sources.
+
+Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
+Link: https://lore.kernel.org/all/20230228144520.21816-1-zajec5@gmail.com/
+Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
+---
+ .../boot/dts/broadcom/bcmbca/bcm4908.dtsi     | 39 +++++++++++++++++++
+ 1 file changed, 39 insertions(+)
+
+--- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908.dtsi
++++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908.dtsi
+@@ -148,6 +148,19 @@
+                       interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+                       phys = <&usb_phy PHY_TYPE_USB2>;
+                       status = "disabled";
++
++                      #address-cells = <1>;
++                      #size-cells = <0>;
++
++                      ehci_port1: port@1 {
++                              reg = <1>;
++                              #trigger-source-cells = <0>;
++                      };
++
++                      ehci_port2: port@2 {
++                              reg = <2>;
++                              #trigger-source-cells = <0>;
++                      };
+               };
+               ohci: usb@c400 {
+@@ -156,6 +169,19 @@
+                       interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+                       phys = <&usb_phy PHY_TYPE_USB2>;
+                       status = "disabled";
++
++                      #address-cells = <1>;
++                      #size-cells = <0>;
++
++                      ohci_port1: port@1 {
++                              reg = <1>;
++                              #trigger-source-cells = <0>;
++                      };
++
++                      ohci_port2: port@2 {
++                              reg = <2>;
++                              #trigger-source-cells = <0>;
++                      };
+               };
+               xhci: usb@d000 {
+@@ -164,6 +190,19 @@
+                       interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+                       phys = <&usb_phy PHY_TYPE_USB3>;
+                       status = "disabled";
++
++                      #address-cells = <1>;
++                      #size-cells = <0>;
++
++                      xhci_port1: port@1 {
++                              reg = <1>;
++                              #trigger-source-cells = <0>;
++                      };
++
++                      xhci_port2: port@2 {
++                              reg = <2>;
++                              #trigger-source-cells = <0>;
++                      };
+               };
+               bus@80000 {
diff --git a/target/linux/bcm4908/patches-5.10/040-v6.4-0006-arm64-dts-broadcom-bcmbca-bcm4908-add-Netgear-R8000P.patch b/target/linux/bcm4908/patches-5.10/040-v6.4-0006-arm64-dts-broadcom-bcmbca-bcm4908-add-Netgear-R8000P.patch
new file mode 100644 (file)
index 0000000..3e210d6
--- /dev/null
@@ -0,0 +1,38 @@
+From 889e53ccccc29ff4bf8d4c89cca34e8768845747 Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
+Date: Tue, 28 Feb 2023 15:45:19 +0100
+Subject: [PATCH] arm64: dts: broadcom: bcmbca: bcm4908: add Netgear R8000P USB
+ LED triggers
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+This device has 2 USB LEDs meant to be triggered by devices in relevant
+USB ports.
+
+Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
+Link: https://lore.kernel.org/all/20230228144520.21816-2-zajec5@gmail.com/
+Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
+---
+ .../arm64/boot/dts/broadcom/bcmbca/bcm4906-netgear-r8000p.dts | 4 ++++
+ 1 file changed, 4 insertions(+)
+
+--- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm4906-netgear-r8000p.dts
++++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4906-netgear-r8000p.dts
+@@ -58,12 +58,16 @@
+                       function = "usb2";
+                       color = <LED_COLOR_ID_WHITE>;
+                       gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
++                      trigger-sources = <&ohci_port1>, <&ehci_port1>;
++                      linux,default-trigger = "usbport";
+               };
+               led-usb3 {
+                       function = "usb3";
+                       color = <LED_COLOR_ID_WHITE>;
+                       gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
++                      trigger-sources = <&ohci_port2>, <&ehci_port2>, <&xhci_port2>;
++                      linux,default-trigger = "usbport";
+               };
+               led-wifi {
diff --git a/target/linux/bcm4908/patches-5.10/040-v6.4-0007-arm64-dts-broadcom-bcmbca-bcm4908-add-TP-Link-C2300-.patch b/target/linux/bcm4908/patches-5.10/040-v6.4-0007-arm64-dts-broadcom-bcmbca-bcm4908-add-TP-Link-C2300-.patch
new file mode 100644 (file)
index 0000000..959ccd4
--- /dev/null
@@ -0,0 +1,41 @@
+From e6d356b146b75f1f77621aab7950a1eb550859f9 Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
+Date: Tue, 28 Feb 2023 15:45:20 +0100
+Subject: [PATCH] arm64: dts: broadcom: bcmbca: bcm4908: add TP-Link C2300 USB
+ LED triggers
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+This device has 2 USB LEDs meant to be triggered by devices in relevant
+USB ports.
+
+While at it fix typo in USB LED name.
+
+Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
+Link: https://lore.kernel.org/all/20230228144520.21816-3-zajec5@gmail.com/
+Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
+---
+ .../dts/broadcom/bcmbca/bcm4906-tplink-archer-c2300-v1.dts  | 6 +++++-
+ 1 file changed, 5 insertions(+), 1 deletion(-)
+
+--- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm4906-tplink-archer-c2300-v1.dts
++++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4906-tplink-archer-c2300-v1.dts
+@@ -64,12 +64,16 @@
+                       function = "usb2";
+                       color = <LED_COLOR_ID_BLUE>;
+                       gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
++                      trigger-sources = <&ohci_port1>, <&ehci_port1>;
++                      linux,default-trigger = "usbport";
+               };
+               led-usb3 {
+-                      function = "usbd3";
++                      function = "usb3";
+                       color = <LED_COLOR_ID_BLUE>;
+                       gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
++                      trigger-sources = <&ohci_port2>, <&ehci_port2>, <&xhci_port2>;
++                      linux,default-trigger = "usbport";
+               };
+               led-brightness {
index bc0743c800c014487a40a6bd52a02b2b9203676a..a7c6d0102fe4753844a107da574dcf73cafc9d91 100644 (file)
@@ -12,7 +12,7 @@ Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
 
 --- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908.dtsi
 +++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908.dtsi
-@@ -297,7 +297,7 @@
+@@ -343,7 +343,7 @@
                gpio0: gpio-controller@500 {
                        compatible = "brcm,bcm6345-gpio";
                        reg-names = "dirout", "dat";
diff --git a/target/linux/bcm4908/patches-5.15/035-v6.2-0003-arm64-dts-Update-cache-properties-for-broadcom.patch b/target/linux/bcm4908/patches-5.15/035-v6.2-0003-arm64-dts-Update-cache-properties-for-broadcom.patch
new file mode 100644 (file)
index 0000000..a19ab8c
--- /dev/null
@@ -0,0 +1,134 @@
+From e567e58d6819adc002c57b81e16b88da24d3b4aa Mon Sep 17 00:00:00 2001
+From: Pierre Gondois <pierre.gondois@arm.com>
+Date: Tue, 22 Nov 2022 17:32:07 +0100
+Subject: [PATCH] arm64: dts: Update cache properties for broadcom
+
+The DeviceTree Specification v0.3 specifies that the cache node
+'compatible' and 'cache-level' properties are 'required'. Cf.
+s3.8 Multi-level and Shared Cache Nodes
+The 'cache-unified' property should be present if one of the
+properties for unified cache is present ('cache-size', ...).
+
+Update the Device Trees accordingly.
+
+Acked-by: William Zhang <william.zhang@broadcom.com>
+Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
+Link: https://lore.kernel.org/r/20221122163208.3810985-3-pierre.gondois@arm.com
+Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
+---
+ arch/arm64/boot/dts/broadcom/bcmbca/bcm4908.dtsi    | 1 +
+ arch/arm64/boot/dts/broadcom/bcmbca/bcm4912.dtsi    | 1 +
+ arch/arm64/boot/dts/broadcom/bcmbca/bcm63146.dtsi   | 1 +
+ arch/arm64/boot/dts/broadcom/bcmbca/bcm63158.dtsi   | 1 +
+ arch/arm64/boot/dts/broadcom/bcmbca/bcm6813.dtsi    | 1 +
+ arch/arm64/boot/dts/broadcom/bcmbca/bcm6856.dtsi    | 1 +
+ arch/arm64/boot/dts/broadcom/bcmbca/bcm6858.dtsi    | 1 +
+ arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi    | 1 +
+ arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi | 4 ++++
+ 9 files changed, 12 insertions(+)
+
+--- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908.dtsi
++++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908.dtsi
+@@ -63,6 +63,7 @@
+               l2: l2-cache0 {
+                       compatible = "cache";
++                      cache-level = <2>;
+               };
+       };
+--- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm4912.dtsi
++++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4912.dtsi
+@@ -51,6 +51,7 @@
+               L2_0: l2-cache0 {
+                       compatible = "cache";
++                      cache-level = <2>;
+               };
+       };
+--- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm63146.dtsi
++++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm63146.dtsi
+@@ -35,6 +35,7 @@
+               L2_0: l2-cache0 {
+                       compatible = "cache";
++                      cache-level = <2>;
+               };
+       };
+--- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm63158.dtsi
++++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm63158.dtsi
+@@ -51,6 +51,7 @@
+               L2_0: l2-cache0 {
+                       compatible = "cache";
++                      cache-level = <2>;
+               };
+       };
+--- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm6813.dtsi
++++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm6813.dtsi
+@@ -51,6 +51,7 @@
+               L2_0: l2-cache0 {
+                       compatible = "cache";
++                      cache-level = <2>;
+               };
+       };
+--- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm6856.dtsi
++++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm6856.dtsi
+@@ -35,6 +35,7 @@
+               L2_0: l2-cache0 {
+                       compatible = "cache";
++                      cache-level = <2>;
+               };
+       };
+--- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm6858.dtsi
++++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm6858.dtsi
+@@ -50,6 +50,7 @@
+               };
+               L2_0: l2-cache0 {
+                       compatible = "cache";
++                      cache-level = <2>;
+               };
+       };
+--- a/arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi
++++ b/arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi
+@@ -79,6 +79,7 @@
+               CLUSTER0_L2: l2-cache@0 {
+                       compatible = "cache";
++                      cache-level = <2>;
+               };
+       };
+--- a/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi
++++ b/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi
+@@ -108,18 +108,22 @@
+               CLUSTER0_L2: l2-cache@0 {
+                       compatible = "cache";
++                      cache-level = <2>;
+               };
+               CLUSTER1_L2: l2-cache@100 {
+                       compatible = "cache";
++                      cache-level = <2>;
+               };
+               CLUSTER2_L2: l2-cache@200 {
+                       compatible = "cache";
++                      cache-level = <2>;
+               };
+               CLUSTER3_L2: l2-cache@300 {
+                       compatible = "cache";
++                      cache-level = <2>;
+               };
+       };
diff --git a/target/linux/bcm4908/patches-5.15/036-v6.4-0001-arm64-dts-broadcom-bcmbca-Add-spi-controller-node.patch b/target/linux/bcm4908/patches-5.15/036-v6.4-0001-arm64-dts-broadcom-bcmbca-Add-spi-controller-node.patch
new file mode 100644 (file)
index 0000000..e8e1228
--- /dev/null
@@ -0,0 +1,367 @@
+From f5d83b714e304d5f3229da434af2eeea033c4f5d Mon Sep 17 00:00:00 2001
+From: William Zhang <william.zhang@broadcom.com>
+Date: Mon, 6 Feb 2023 22:58:15 -0800
+Subject: [PATCH] arm64: dts: broadcom: bcmbca: Add spi controller node
+
+Add support for HSSPI controller in ARMv8 chip dts files.
+
+Signed-off-by: William Zhang <william.zhang@broadcom.com>
+Link: https://lore.kernel.org/r/20230207065826.285013-5-william.zhang@broadcom.com
+Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
+---
+ .../boot/dts/broadcom/bcmbca/bcm4908.dtsi     | 18 +++++++++++++++++
+ .../boot/dts/broadcom/bcmbca/bcm4912.dtsi     | 20 +++++++++++++++++++
+ .../boot/dts/broadcom/bcmbca/bcm63146.dtsi    | 19 ++++++++++++++++++
+ .../boot/dts/broadcom/bcmbca/bcm63158.dtsi    | 19 ++++++++++++++++++
+ .../boot/dts/broadcom/bcmbca/bcm6813.dtsi     | 20 +++++++++++++++++++
+ .../boot/dts/broadcom/bcmbca/bcm6856.dtsi     | 18 +++++++++++++++++
+ .../boot/dts/broadcom/bcmbca/bcm6858.dtsi     | 18 +++++++++++++++++
+ .../boot/dts/broadcom/bcmbca/bcm94908.dts     |  4 ++++
+ .../boot/dts/broadcom/bcmbca/bcm94912.dts     |  4 ++++
+ .../boot/dts/broadcom/bcmbca/bcm963146.dts    |  4 ++++
+ .../boot/dts/broadcom/bcmbca/bcm963158.dts    |  4 ++++
+ .../boot/dts/broadcom/bcmbca/bcm96813.dts     |  4 ++++
+ .../boot/dts/broadcom/bcmbca/bcm96856.dts     |  4 ++++
+ .../boot/dts/broadcom/bcmbca/bcm96858.dts     |  4 ++++
+ 14 files changed, 160 insertions(+)
+
+--- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908.dtsi
++++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908.dtsi
+@@ -107,6 +107,12 @@
+                       clock-frequency = <50000000>;
+                       clock-output-names = "periph";
+               };
++
++              hsspi_pll: hsspi-pll {
++                      compatible = "fixed-clock";
++                      #clock-cells = <0>;
++                      clock-frequency = <400000000>;
++              };
+       };
+       soc {
+@@ -531,6 +537,18 @@
+                       #size-cells = <0>;
+               };
++              hsspi: spi@1000{
++                      #address-cells = <1>;
++                      #size-cells = <0>;
++                      compatible = "brcm,bcm4908-hsspi", "brcm,bcmbca-hsspi-v1.0";
++                      reg = <0x1000 0x600>;
++                      interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
++                      clocks = <&hsspi_pll &hsspi_pll>;
++                      clock-names = "hsspi", "pll";
++                      num-cs = <8>;
++                      status = "disabled";
++              };
++
+               nand-controller@1800 {
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+--- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm4912.dtsi
++++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4912.dtsi
+@@ -79,6 +79,7 @@
+                       #clock-cells = <0>;
+                       clock-frequency = <200000000>;
+               };
++
+               uart_clk: uart-clk {
+                       compatible = "fixed-factor-clock";
+                       #clock-cells = <0>;
+@@ -86,6 +87,12 @@
+                       clock-div = <4>;
+                       clock-mult = <1>;
+               };
++
++              hsspi_pll: hsspi-pll {
++                      compatible = "fixed-clock";
++                      #clock-cells = <0>;
++                      clock-frequency = <200000000>;
++              };
+       };
+       psci {
+@@ -117,6 +124,19 @@
+               #size-cells = <1>;
+               ranges = <0x0 0x0 0xff800000 0x800000>;
++              hsspi: spi@1000 {
++                      #address-cells = <1>;
++                      #size-cells = <0>;
++                      compatible = "brcm,bcm4912-hsspi", "brcm,bcmbca-hsspi-v1.1";
++                      reg = <0x1000 0x600>, <0x2610 0x4>;
++                      reg-names = "hsspi", "spim-ctrl";
++                      interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
++                      clocks = <&hsspi_pll &hsspi_pll>;
++                      clock-names = "hsspi", "pll";
++                      num-cs = <8>;
++                      status = "disabled";
++              };
++
+               uart0: serial@12000 {
+                       compatible = "arm,pl011", "arm,primecell";
+                       reg = <0x12000 0x1000>;
+--- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm63146.dtsi
++++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm63146.dtsi
+@@ -60,6 +60,7 @@
+                       #clock-cells = <0>;
+                       clock-frequency = <200000000>;
+               };
++
+               uart_clk: uart-clk {
+                       compatible = "fixed-factor-clock";
+                       #clock-cells = <0>;
+@@ -67,6 +68,12 @@
+                       clock-div = <4>;
+                       clock-mult = <1>;
+               };
++
++              hsspi_pll: hsspi-pll {
++                      compatible = "fixed-clock";
++                      #clock-cells = <0>;
++                      clock-frequency = <200000000>;
++              };
+       };
+       psci {
+@@ -99,6 +106,18 @@
+               #size-cells = <1>;
+               ranges = <0x0 0x0 0xff800000 0x800000>;
++              hsspi: spi@1000 {
++                      #address-cells = <1>;
++                      #size-cells = <0>;
++                      compatible = "brcm,bcm63146-hsspi", "brcm,bcmbca-hsspi-v1.0";
++                      reg = <0x1000 0x600>;
++                      interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
++                      clocks = <&hsspi_pll &hsspi_pll>;
++                      clock-names = "hsspi", "pll";
++                      num-cs = <8>;
++                      status = "disabled";
++              };
++
+               uart0: serial@12000 {
+                       compatible = "arm,pl011", "arm,primecell";
+                       reg = <0x12000 0x1000>;
+--- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm63158.dtsi
++++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm63158.dtsi
+@@ -79,6 +79,7 @@
+                       #clock-cells = <0>;
+                       clock-frequency = <200000000>;
+               };
++
+               uart_clk: uart-clk {
+                       compatible = "fixed-factor-clock";
+                       #clock-cells = <0>;
+@@ -86,6 +87,12 @@
+                       clock-div = <4>;
+                       clock-mult = <1>;
+               };
++
++              hsspi_pll: hsspi-pll {
++                      compatible = "fixed-clock";
++                      #clock-cells = <0>;
++                      clock-frequency = <400000000>;
++              };
+       };
+       psci {
+@@ -117,6 +124,18 @@
+               #size-cells = <1>;
+               ranges = <0x0 0x0 0xff800000 0x800000>;
++              hsspi: spi@1000 {
++                      #address-cells = <1>;
++                      #size-cells = <0>;
++                      compatible = "brcm,bcm63158-hsspi", "brcm,bcmbca-hsspi-v1.0";
++                      reg = <0x1000 0x600>;
++                      interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
++                      clocks = <&hsspi_pll &hsspi_pll>;
++                      clock-names = "hsspi", "pll";
++                      num-cs = <8>;
++                      status = "disabled";
++              };
++
+               uart0: serial@12000 {
+                       compatible = "arm,pl011", "arm,primecell";
+                       reg = <0x12000 0x1000>;
+--- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm6813.dtsi
++++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm6813.dtsi
+@@ -79,6 +79,7 @@
+                       #clock-cells = <0>;
+                       clock-frequency = <200000000>;
+               };
++
+               uart_clk: uart-clk {
+                       compatible = "fixed-factor-clock";
+                       #clock-cells = <0>;
+@@ -86,6 +87,12 @@
+                       clock-div = <4>;
+                       clock-mult = <1>;
+               };
++
++              hsspi_pll: hsspi-pll {
++                      compatible = "fixed-clock";
++                      #clock-cells = <0>;
++                      clock-frequency = <200000000>;
++              };
+       };
+       psci {
+@@ -117,6 +124,19 @@
+               #size-cells = <1>;
+               ranges = <0x0 0x0 0xff800000 0x800000>;
++              hsspi: spi@1000 {
++                      #address-cells = <1>;
++                      #size-cells = <0>;
++                      compatible = "brcm,bcm6813-hsspi", "brcm,bcmbca-hsspi-v1.1";
++                      reg = <0x1000 0x600>, <0x2610 0x4>;
++                      reg-names = "hsspi", "spim-ctrl";
++                      interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
++                      clocks = <&hsspi_pll &hsspi_pll>;
++                      clock-names = "hsspi", "pll";
++                      num-cs = <8>;
++                      status = "disabled";
++              };
++
+               uart0: serial@12000 {
+                       compatible = "arm,pl011", "arm,primecell";
+                       reg = <0x12000 0x1000>;
+--- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm6856.dtsi
++++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm6856.dtsi
+@@ -60,6 +60,12 @@
+                       #clock-cells = <0>;
+                       clock-frequency = <200000000>;
+               };
++
++              hsspi_pll: hsspi-pll {
++                      compatible = "fixed-clock";
++                      #clock-cells = <0>;
++                      clock-frequency = <400000000>;
++              };
+       };
+       psci {
+@@ -100,5 +106,17 @@
+                       clock-names = "refclk";
+                       status = "disabled";
+               };
++
++              hsspi: spi@1000 {
++                      #address-cells = <1>;
++                      #size-cells = <0>;
++                      compatible = "brcm,bcm6856-hsspi", "brcm,bcmbca-hsspi-v1.0";
++                      reg = <0x1000 0x600>;
++                      interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
++                      clocks = <&hsspi_pll &hsspi_pll>;
++                      clock-names = "hsspi", "pll";
++                      num-cs = <8>;
++                      status = "disabled";
++              };
+       };
+ };
+--- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm6858.dtsi
++++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm6858.dtsi
+@@ -78,6 +78,12 @@
+                       #clock-cells = <0>;
+                       clock-frequency = <200000000>;
+               };
++
++              hsspi_pll: hsspi-pll {
++                      compatible = "fixed-clock";
++                      #clock-cells = <0>;
++                      clock-frequency = <400000000>;
++              };
+       };
+       psci {
+@@ -137,5 +143,17 @@
+                       clock-names = "refclk";
+                       status = "disabled";
+               };
++
++              hsspi: spi@1000 {
++                      #address-cells = <1>;
++                      #size-cells = <0>;
++                      compatible = "brcm,bcm6858-hsspi", "brcm,bcmbca-hsspi-v1.0";
++                      reg = <0x1000 0x600>;
++                      interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
++                      clocks = <&hsspi_pll &hsspi_pll>;
++                      clock-names = "hsspi", "pll";
++                      num-cs = <8>;
++                      status = "disabled";
++              };
+       };
+ };
+--- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm94908.dts
++++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm94908.dts
+@@ -28,3 +28,7 @@
+ &uart0 {
+       status = "okay";
+ };
++
++&hsspi {
++      status = "okay";
++};
+--- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm94912.dts
++++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm94912.dts
+@@ -28,3 +28,7 @@
+ &uart0 {
+       status = "okay";
+ };
++
++&hsspi {
++      status = "okay";
++};
+--- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm963146.dts
++++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm963146.dts
+@@ -28,3 +28,7 @@
+ &uart0 {
+       status = "okay";
+ };
++
++&hsspi {
++      status = "okay";
++};
+--- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm963158.dts
++++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm963158.dts
+@@ -28,3 +28,7 @@
+ &uart0 {
+       status = "okay";
+ };
++
++&hsspi {
++      status = "okay";
++};
+--- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm96813.dts
++++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm96813.dts
+@@ -28,3 +28,7 @@
+ &uart0 {
+       status = "okay";
+ };
++
++&hsspi {
++      status = "okay";
++};
+--- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm96856.dts
++++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm96856.dts
+@@ -28,3 +28,7 @@
+ &uart0 {
+       status = "okay";
+ };
++
++&hsspi {
++      status = "okay";
++};
+--- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm96858.dts
++++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm96858.dts
+@@ -28,3 +28,7 @@
+ &uart0 {
+       status = "okay";
+ };
++
++&hsspi {
++      status = "okay";
++};
diff --git a/target/linux/bcm4908/patches-5.15/036-v6.4-0002-arm64-dts-broadcom-bcmbca-bcm4908-fix-NAND-interrupt.patch b/target/linux/bcm4908/patches-5.15/036-v6.4-0002-arm64-dts-broadcom-bcmbca-bcm4908-fix-NAND-interrupt.patch
new file mode 100644 (file)
index 0000000..b121200
--- /dev/null
@@ -0,0 +1,33 @@
+From 5cca02449490e767289bda38db1577e2c375c084 Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
+Date: Tue, 28 Feb 2023 15:43:58 +0100
+Subject: [PATCH] arm64: dts: broadcom: bcmbca: bcm4908: fix NAND interrupt
+ name
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+This fixes:
+arch/arm64/boot/dts/broadcom/bcmbca/bcm94908.dtb: nand-controller@1800: interrupt-names:0: 'nand_ctlrdy' was expected
+        From schema: Documentation/devicetree/bindings/mtd/brcm,brcmnand.yaml
+arch/arm64/boot/dts/broadcom/bcmbca/bcm94908.dtb: nand-controller@1800: Unevaluated properties are not allowed ('interrupt-names' was unexpected)
+        From schema: Documentation/devicetree/bindings/mtd/brcm,brcmnand.yaml
+
+Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
+Link: https://lore.kernel.org/all/20230228144400.21689-1-zajec5@gmail.com/
+Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
+---
+ arch/arm64/boot/dts/broadcom/bcmbca/bcm4908.dtsi | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+--- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908.dtsi
++++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908.dtsi
+@@ -556,7 +556,7 @@
+                       reg = <0x1800 0x600>, <0x2000 0x10>;
+                       reg-names = "nand", "nand-int-base";
+                       interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+-                      interrupt-names = "nand";
++                      interrupt-names = "nand_ctlrdy";
+                       status = "okay";
+                       nandcs: nand@0 {
diff --git a/target/linux/bcm4908/patches-5.15/036-v6.4-0003-arm64-dts-broadcom-bcmbca-bcm4908-fix-LED-nodenames.patch b/target/linux/bcm4908/patches-5.15/036-v6.4-0003-arm64-dts-broadcom-bcmbca-bcm4908-fix-LED-nodenames.patch
new file mode 100644 (file)
index 0000000..7ce17c1
--- /dev/null
@@ -0,0 +1,66 @@
+From 23be9f68f933adee8163b8efc9c6bff71410cc7c Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
+Date: Tue, 28 Feb 2023 15:43:59 +0100
+Subject: [PATCH] arm64: dts: broadcom: bcmbca: bcm4908: fix LED nodenames
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+This fixes:
+arch/arm64/boot/dts/broadcom/bcmbca/bcm4908-asus-gt-ac5300.dtb: leds@800: 'led-lan@19', 'led-power@11', 'led-wan-red@12', 'led-wan-white@15', 'led-wps@14' do not match any of the regexes: '^led@[a-f0-9]+$', 'pinctrl-[0-9]+'
+        From schema: Documentation/devicetree/bindings/leds/leds-bcm63138.yaml
+
+Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
+Link: https://lore.kernel.org/all/20230228144400.21689-2-zajec5@gmail.com/
+Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
+---
+ .../dts/broadcom/bcmbca/bcm4908-asus-gt-ac5300.dts     | 10 +++++-----
+ 1 file changed, 5 insertions(+), 5 deletions(-)
+
+--- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908-asus-gt-ac5300.dts
++++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908-asus-gt-ac5300.dts
+@@ -120,7 +120,7 @@
+ };
+ &leds {
+-      led-power@11 {
++      led@11 {
+               reg = <0x11>;
+               function = LED_FUNCTION_POWER;
+               color = <LED_COLOR_ID_WHITE>;
+@@ -130,7 +130,7 @@
+               pinctrl-0 = <&pins_led_17_a>;
+       };
+-      led-wan-red@12 {
++      led@12 {
+               reg = <0x12>;
+               function = LED_FUNCTION_WAN;
+               color = <LED_COLOR_ID_RED>;
+@@ -139,7 +139,7 @@
+               pinctrl-0 = <&pins_led_18_a>;
+       };
+-      led-wps@14 {
++      led@14 {
+               reg = <0x14>;
+               function = LED_FUNCTION_WPS;
+               color = <LED_COLOR_ID_WHITE>;
+@@ -148,7 +148,7 @@
+               pinctrl-0 = <&pins_led_20_a>;
+       };
+-      led-wan-white@15 {
++      led@15 {
+               reg = <0x15>;
+               function = LED_FUNCTION_WAN;
+               color = <LED_COLOR_ID_WHITE>;
+@@ -157,7 +157,7 @@
+               pinctrl-0 = <&pins_led_21_a>;
+       };
+-      led-lan@19 {
++      led@19 {
+               reg = <0x19>;
+               function = LED_FUNCTION_LAN;
+               color = <LED_COLOR_ID_WHITE>;
diff --git a/target/linux/bcm4908/patches-5.15/036-v6.4-0004-arm64-dts-broadcom-bcmbca-bcm4908-fix-procmon-nodena.patch b/target/linux/bcm4908/patches-5.15/036-v6.4-0004-arm64-dts-broadcom-bcmbca-bcm4908-fix-procmon-nodena.patch
new file mode 100644 (file)
index 0000000..a469a32
--- /dev/null
@@ -0,0 +1,30 @@
+From f16a8294dd7a02c7ad042cd2e3acc5ea06698dc1 Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
+Date: Tue, 28 Feb 2023 15:44:00 +0100
+Subject: [PATCH] arm64: dts: broadcom: bcmbca: bcm4908: fix procmon nodename
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+This fixes:
+arch/arm64/boot/dts/broadcom/bcmbca/bcm94908.dtb: syscon@280000: $nodename:0: 'syscon@280000' does not match '^([a-z][a-z0-9\\-]+-bus|bus|localbus|soc|axi|ahb|apb)(@.+)?$'
+        From schema: schemas/simple-bus.yaml
+
+Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
+Link: https://lore.kernel.org/all/20230228144400.21689-3-zajec5@gmail.com/
+Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
+---
+ arch/arm64/boot/dts/broadcom/bcmbca/bcm4908.dtsi | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+--- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908.dtsi
++++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908.dtsi
+@@ -260,7 +260,7 @@
+                       };
+               };
+-              procmon: syscon@280000 {
++              procmon: bus@280000 {
+                       compatible = "simple-bus";
+                       reg = <0x280000 0x1000>;
+                       ranges;
diff --git a/target/linux/bcm4908/patches-5.15/036-v6.4-0005-arm64-dts-broadcom-bcmbca-bcm4908-add-on-SoC-USB-por.patch b/target/linux/bcm4908/patches-5.15/036-v6.4-0005-arm64-dts-broadcom-bcmbca-bcm4908-add-on-SoC-USB-por.patch
new file mode 100644 (file)
index 0000000..47b2455
--- /dev/null
@@ -0,0 +1,81 @@
+From 477cad715de1dfc256a20da3ed83b62f3cb2944d Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
+Date: Tue, 28 Feb 2023 15:45:18 +0100
+Subject: [PATCH] arm64: dts: broadcom: bcmbca: bcm4908: add on-SoC USB ports
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+BCM4908 has 3 USB controllers each with 2 USB ports. Home routers often
+have LEDs indicating state of selected USB ports. Describe those SoC USB
+ports to allow using them as LED trigger sources.
+
+Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
+Link: https://lore.kernel.org/all/20230228144520.21816-1-zajec5@gmail.com/
+Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
+---
+ .../boot/dts/broadcom/bcmbca/bcm4908.dtsi     | 39 +++++++++++++++++++
+ 1 file changed, 39 insertions(+)
+
+--- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908.dtsi
++++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908.dtsi
+@@ -148,6 +148,19 @@
+                       interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+                       phys = <&usb_phy PHY_TYPE_USB2>;
+                       status = "disabled";
++
++                      #address-cells = <1>;
++                      #size-cells = <0>;
++
++                      ehci_port1: port@1 {
++                              reg = <1>;
++                              #trigger-source-cells = <0>;
++                      };
++
++                      ehci_port2: port@2 {
++                              reg = <2>;
++                              #trigger-source-cells = <0>;
++                      };
+               };
+               ohci: usb@c400 {
+@@ -156,6 +169,19 @@
+                       interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+                       phys = <&usb_phy PHY_TYPE_USB2>;
+                       status = "disabled";
++
++                      #address-cells = <1>;
++                      #size-cells = <0>;
++
++                      ohci_port1: port@1 {
++                              reg = <1>;
++                              #trigger-source-cells = <0>;
++                      };
++
++                      ohci_port2: port@2 {
++                              reg = <2>;
++                              #trigger-source-cells = <0>;
++                      };
+               };
+               xhci: usb@d000 {
+@@ -164,6 +190,19 @@
+                       interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+                       phys = <&usb_phy PHY_TYPE_USB3>;
+                       status = "disabled";
++
++                      #address-cells = <1>;
++                      #size-cells = <0>;
++
++                      xhci_port1: port@1 {
++                              reg = <1>;
++                              #trigger-source-cells = <0>;
++                      };
++
++                      xhci_port2: port@2 {
++                              reg = <2>;
++                              #trigger-source-cells = <0>;
++                      };
+               };
+               bus@80000 {
diff --git a/target/linux/bcm4908/patches-5.15/036-v6.4-0006-arm64-dts-broadcom-bcmbca-bcm4908-add-Netgear-R8000P.patch b/target/linux/bcm4908/patches-5.15/036-v6.4-0006-arm64-dts-broadcom-bcmbca-bcm4908-add-Netgear-R8000P.patch
new file mode 100644 (file)
index 0000000..3e210d6
--- /dev/null
@@ -0,0 +1,38 @@
+From 889e53ccccc29ff4bf8d4c89cca34e8768845747 Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
+Date: Tue, 28 Feb 2023 15:45:19 +0100
+Subject: [PATCH] arm64: dts: broadcom: bcmbca: bcm4908: add Netgear R8000P USB
+ LED triggers
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+This device has 2 USB LEDs meant to be triggered by devices in relevant
+USB ports.
+
+Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
+Link: https://lore.kernel.org/all/20230228144520.21816-2-zajec5@gmail.com/
+Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
+---
+ .../arm64/boot/dts/broadcom/bcmbca/bcm4906-netgear-r8000p.dts | 4 ++++
+ 1 file changed, 4 insertions(+)
+
+--- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm4906-netgear-r8000p.dts
++++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4906-netgear-r8000p.dts
+@@ -58,12 +58,16 @@
+                       function = "usb2";
+                       color = <LED_COLOR_ID_WHITE>;
+                       gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
++                      trigger-sources = <&ohci_port1>, <&ehci_port1>;
++                      linux,default-trigger = "usbport";
+               };
+               led-usb3 {
+                       function = "usb3";
+                       color = <LED_COLOR_ID_WHITE>;
+                       gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
++                      trigger-sources = <&ohci_port2>, <&ehci_port2>, <&xhci_port2>;
++                      linux,default-trigger = "usbport";
+               };
+               led-wifi {
diff --git a/target/linux/bcm4908/patches-5.15/036-v6.4-0007-arm64-dts-broadcom-bcmbca-bcm4908-add-TP-Link-C2300-.patch b/target/linux/bcm4908/patches-5.15/036-v6.4-0007-arm64-dts-broadcom-bcmbca-bcm4908-add-TP-Link-C2300-.patch
new file mode 100644 (file)
index 0000000..959ccd4
--- /dev/null
@@ -0,0 +1,41 @@
+From e6d356b146b75f1f77621aab7950a1eb550859f9 Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
+Date: Tue, 28 Feb 2023 15:45:20 +0100
+Subject: [PATCH] arm64: dts: broadcom: bcmbca: bcm4908: add TP-Link C2300 USB
+ LED triggers
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+This device has 2 USB LEDs meant to be triggered by devices in relevant
+USB ports.
+
+While at it fix typo in USB LED name.
+
+Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
+Link: https://lore.kernel.org/all/20230228144520.21816-3-zajec5@gmail.com/
+Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
+---
+ .../dts/broadcom/bcmbca/bcm4906-tplink-archer-c2300-v1.dts  | 6 +++++-
+ 1 file changed, 5 insertions(+), 1 deletion(-)
+
+--- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm4906-tplink-archer-c2300-v1.dts
++++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4906-tplink-archer-c2300-v1.dts
+@@ -64,12 +64,16 @@
+                       function = "usb2";
+                       color = <LED_COLOR_ID_BLUE>;
+                       gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
++                      trigger-sources = <&ohci_port1>, <&ehci_port1>;
++                      linux,default-trigger = "usbport";
+               };
+               led-usb3 {
+-                      function = "usbd3";
++                      function = "usb3";
+                       color = <LED_COLOR_ID_BLUE>;
+                       gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
++                      trigger-sources = <&ohci_port2>, <&ehci_port2>, <&xhci_port2>;
++                      linux,default-trigger = "usbport";
+               };
+               led-brightness {
index bc0743c800c014487a40a6bd52a02b2b9203676a..a7c6d0102fe4753844a107da574dcf73cafc9d91 100644 (file)
@@ -12,7 +12,7 @@ Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
 
 --- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908.dtsi
 +++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908.dtsi
-@@ -297,7 +297,7 @@
+@@ -343,7 +343,7 @@
                gpio0: gpio-controller@500 {
                        compatible = "brcm,bcm6345-gpio";
                        reg-names = "dirout", "dat";