Those sort out BCM53573 Ethernet info finally.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
--- /dev/null
+From 44ad8207806973f4e4f7d870fff36cc01f494250 Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
+Date: Thu, 13 Jul 2023 13:11:45 +0200
+Subject: [PATCH] ARM: dts: BCM53573: Fix Ethernet info for Luxul devices
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+Both Luxul's XAP devices (XAP-810 and XAP-1440) are access points that
+use a non-default design. They don't include switch but have a single
+Ethernet port and BCM54210E PHY connected to the Ethernet controller's
+MDIO bus.
+
+Support for those devices regressed due to two changes:
+
+1. Describing MDIO bus with switch
+After commit 9fb90ae6cae7 ("ARM: dts: BCM53573: Describe on-SoC BCM53125
+rev 4 switch") Linux stopped probing for MDIO devices.
+
+2. Dropping hardcoded BCM54210E delays
+In commit fea7fda7f50a ("net: phy: broadcom: Fix RGMII delays
+configuration for BCM54210E") support for other PHY modes was added but
+that requires a proper "phy-mode" value in DT.
+
+Both above changes are correct (they don't need to be reverted or
+anything) but they need this fix for DT data to be correct and for Linux
+to work properly.
+
+Fixes: 9fb90ae6cae7 ("ARM: dts: BCM53573: Describe on-SoC BCM53125 rev 4 switch")
+Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
+Link: https://lore.kernel.org/r/20230713111145.14864-1-zajec5@gmail.com
+Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
+---
+ .../boot/dts/broadcom/bcm47189-luxul-xap-1440.dts | 13 +++++++++++++
+ .../boot/dts/broadcom/bcm47189-luxul-xap-810.dts | 13 +++++++++++++
+ 2 files changed, 26 insertions(+)
+
+--- a/arch/arm/boot/dts/bcm47189-luxul-xap-1440.dts
++++ b/arch/arm/boot/dts/bcm47189-luxul-xap-1440.dts
+@@ -45,3 +45,16 @@
+ };
+ };
+ };
++
++&gmac0 {
++ phy-mode = "rgmii";
++ phy-handle = <&bcm54210e>;
++
++ mdio {
++ /delete-node/ switch@1e;
++
++ bcm54210e: ethernet-phy@0 {
++ reg = <0>;
++ };
++ };
++};
+--- a/arch/arm/boot/dts/bcm47189-luxul-xap-810.dts
++++ b/arch/arm/boot/dts/bcm47189-luxul-xap-810.dts
+@@ -81,3 +81,16 @@
+ };
+ };
+ };
++
++&gmac0 {
++ phy-mode = "rgmii";
++ phy-handle = <&bcm54210e>;
++
++ mdio {
++ /delete-node/ switch@1e;
++
++ bcm54210e: ethernet-phy@0 {
++ reg = <0>;
++ };
++ };
++};
--- /dev/null
+From 72ec77d74d28be7359ef77971cdee38b60af9e49 Mon Sep 17 00:00:00 2001
+From: Linus Walleij <linus.walleij@linaro.org>
+Date: Thu, 13 Jul 2023 00:16:42 +0200
+Subject: [PATCH] ARM: dts: bcm5301x: Add SEAMA compatibles
+
+This adds SEAMA compatibles to the firmware partition of these
+two D-Link devices.
+
+Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
+Link: https://lore.kernel.org/r/20230713-seama-partitions-v4-2-69e577453d40@linaro.org
+Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
+---
+ arch/arm/boot/dts/broadcom/bcm47094-dlink-dir-885l.dts | 1 +
+ arch/arm/boot/dts/broadcom/bcm47094-dlink-dir-890l.dts | 1 +
+ 2 files changed, 2 insertions(+)
+
+--- a/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
++++ b/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
+@@ -33,6 +33,7 @@
+ #size-cells = <1>;
+
+ partition@0 {
++ compatible = "seama";
+ label = "firmware";
+ reg = <0x00000000 0x08000000>;
+ };
+--- a/arch/arm/boot/dts/bcm47094-dlink-dir-890l.dts
++++ b/arch/arm/boot/dts/bcm47094-dlink-dir-890l.dts
+@@ -149,6 +149,7 @@
+ * partitions: this device uses SEAMA.
+ */
+ firmware@0 {
++ compatible = "seama";
+ label = "firmware";
+ reg = <0x00000000 0x08000000>;
+ };
--- /dev/null
+From 7141209db9c335ab261a17933809a3e660ebdc12 Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
+Date: Sun, 23 Jul 2023 21:54:14 +0200
+Subject: [PATCH] ARM: dts: BCM53573: Fix Tenda AC9 switch CPU port
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+Primary Ethernet interface is connected to the port 8 (not 5).
+
+Fixes: 64612828628c ("ARM: dts: BCM53573: Add Tenda AC9 switch ports")
+Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
+Link: https://lore.kernel.org/r/20230723195416.7831-1-zajec5@gmail.com
+Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
+---
+ arch/arm/boot/dts/broadcom/bcm47189-tenda-ac9.dts | 4 ++--
+ 1 file changed, 2 insertions(+), 2 deletions(-)
+
+--- a/arch/arm/boot/dts/bcm47189-tenda-ac9.dts
++++ b/arch/arm/boot/dts/bcm47189-tenda-ac9.dts
+@@ -135,8 +135,8 @@
+ label = "lan4";
+ };
+
+- port@5 {
+- reg = <5>;
++ port@8 {
++ reg = <8>;
+ label = "cpu";
+ ethernet = <&gmac0>;
+ };
--- /dev/null
+From 8d6b61ecad2f1c939813c5c4517d53e04672dc48 Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
+Date: Sun, 23 Jul 2023 21:54:15 +0200
+Subject: [PATCH] ARM: dts: BCM53573: Describe BCM53125 switch ports in the
+ main DTS
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+BCM53125 always has 5 ports with GPHYs (for LAN/WAN ports) and 2 IMP
+ports. It seems the best place to describe that in the main .dtsi.
+Device specific bits can go to device .dts files. This will help
+avoiding some code duplication.
+
+Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
+Link: https://lore.kernel.org/r/20230723195416.7831-2-zajec5@gmail.com
+Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
+---
+ .../boot/dts/broadcom/bcm47189-tenda-ac9.dts | 7 -----
+ arch/arm/boot/dts/broadcom/bcm53573.dtsi | 26 ++++++++++++++++++-
+ 2 files changed, 25 insertions(+), 8 deletions(-)
+
+--- a/arch/arm/boot/dts/bcm47189-tenda-ac9.dts
++++ b/arch/arm/boot/dts/bcm47189-tenda-ac9.dts
+@@ -111,34 +111,27 @@
+
+ ports {
+ port@0 {
+- reg = <0>;
+ label = "wan";
+ };
+
+ port@1 {
+- reg = <1>;
+ label = "lan1";
+ };
+
+ port@2 {
+- reg = <2>;
+ label = "lan2";
+ };
+
+ port@3 {
+- reg = <3>;
+ label = "lan3";
+ };
+
+ port@4 {
+- reg = <4>;
+ label = "lan4";
+ };
+
+ port@8 {
+- reg = <8>;
+ label = "cpu";
+- ethernet = <&gmac0>;
+ };
+ };
+ };
+--- a/arch/arm/boot/dts/bcm53573.dtsi
++++ b/arch/arm/boot/dts/bcm53573.dtsi
+@@ -192,10 +192,34 @@
+
+ status = "disabled";
+
+- /* ports are defined in board DTS */
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
++
++ port@0 {
++ reg = <0>;
++ };
++
++ port@1 {
++ reg = <1>;
++ };
++
++ port@2 {
++ reg = <2>;
++ };
++
++ port@3 {
++ reg = <3>;
++ };
++
++ port@4 {
++ reg = <4>;
++ };
++
++ port@8 {
++ reg = <8>;
++ ethernet = <&gmac0>;
++ };
+ };
+ };
+ };
--- /dev/null
+From d95b1caeea194962220db1778ce7fe71cdba788b Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
+Date: Sun, 23 Jul 2023 21:54:16 +0200
+Subject: [PATCH] ARM: dts: BCM53573: Add BCM53125 switch port 5
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+It's connected to the extra Ethernet interface.
+
+Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
+Link: https://lore.kernel.org/r/20230723195416.7831-3-zajec5@gmail.com
+Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
+---
+ arch/arm/boot/dts/broadcom/bcm53573.dtsi | 10 ++++++++++
+ 1 file changed, 10 insertions(+)
+
+--- a/arch/arm/boot/dts/bcm53573.dtsi
++++ b/arch/arm/boot/dts/bcm53573.dtsi
+@@ -216,6 +216,16 @@
+ reg = <4>;
+ };
+
++ port@5 {
++ reg = <5>;
++ ethernet = <&gmac1>;
++
++ fixed-link {
++ speed = <1000>;
++ full-duplex;
++ };
++ };
++
+ port@8 {
+ reg = <8>;
+ ethernet = <&gmac0>;
--- /dev/null
+From e0ae343a2c1b782a346d9b844ea65e1d49c428b2 Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
+Date: Mon, 24 Jul 2023 12:12:27 +0200
+Subject: [PATCH] ARM: dts: BCM53573: Add Ethernet interfaces links
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+BCM53573 has 2 Ethernet interfaces each connected to one of switch ports
+in the default design. They both use fixed links.
+
+An exception are Luxul XAP devices that have switch replaced by a single
+PHY.
+
+Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
+Link: https://lore.kernel.org/r/20230724101227.5420-1-zajec5@gmail.com
+Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
+---
+ .../boot/dts/broadcom/bcm47189-luxul-xap-1440.dts | 2 ++
+ .../arm/boot/dts/broadcom/bcm47189-luxul-xap-810.dts | 2 ++
+ arch/arm/boot/dts/broadcom/bcm53573.dtsi | 12 ++++++++++++
+ 3 files changed, 16 insertions(+)
+
+--- a/arch/arm/boot/dts/bcm47189-luxul-xap-1440.dts
++++ b/arch/arm/boot/dts/bcm47189-luxul-xap-1440.dts
+@@ -50,6 +50,8 @@
+ phy-mode = "rgmii";
+ phy-handle = <&bcm54210e>;
+
++ /delete-node/ fixed-link;
++
+ mdio {
+ /delete-node/ switch@1e;
+
+--- a/arch/arm/boot/dts/bcm47189-luxul-xap-810.dts
++++ b/arch/arm/boot/dts/bcm47189-luxul-xap-810.dts
+@@ -86,6 +86,8 @@
+ phy-mode = "rgmii";
+ phy-handle = <&bcm54210e>;
+
++ /delete-node/ fixed-link;
++
+ mdio {
+ /delete-node/ switch@1e;
+
+--- a/arch/arm/boot/dts/bcm53573.dtsi
++++ b/arch/arm/boot/dts/bcm53573.dtsi
+@@ -181,6 +181,12 @@
+
+ gmac0: ethernet@5000 {
+ reg = <0x5000 0x1000>;
++ phy-mode = "internal";
++
++ fixed-link {
++ speed = <1000>;
++ full-duplex;
++ };
+
+ mdio {
+ #address-cells = <1>;
+@@ -237,6 +243,12 @@
+
+ gmac1: ethernet@b000 {
+ reg = <0xb000 0x1000>;
++ phy-mode = "internal";
++
++ fixed-link {
++ speed = <1000>;
++ full-duplex;
++ };
+ };
+
+ pmu@12000 {
--- /dev/null
+From d8835601e3c306fda78f8736f1aef688e99e892d Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
+Date: Mon, 24 Jul 2023 12:11:59 +0200
+Subject: [PATCH] ARM: dts: BCM53573: Disable second Ethernet on Luxul devices
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+XAP-810 and XAP-1440 both have a single Ethernet port and BCM54210E PHY.
+Their second Ethernet interface is not connected to anything.
+
+Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
+Link: https://lore.kernel.org/r/20230724101159.5289-1-zajec5@gmail.com
+Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
+---
+ arch/arm/boot/dts/broadcom/bcm47189-luxul-xap-1440.dts | 4 ++++
+ arch/arm/boot/dts/broadcom/bcm47189-luxul-xap-810.dts | 4 ++++
+ 2 files changed, 8 insertions(+)
+
+--- a/arch/arm/boot/dts/bcm47189-luxul-xap-1440.dts
++++ b/arch/arm/boot/dts/bcm47189-luxul-xap-1440.dts
+@@ -60,3 +60,7 @@
+ };
+ };
+ };
++
++&gmac1 {
++ status = "disabled";
++};
+--- a/arch/arm/boot/dts/bcm47189-luxul-xap-810.dts
++++ b/arch/arm/boot/dts/bcm47189-luxul-xap-810.dts
+@@ -96,3 +96,7 @@
+ };
+ };
+ };
++
++&gmac1 {
++ status = "disabled";
++};
+++ /dev/null
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Thu, 13 Jul 2023 13:05:44 +0200
-Subject: [PATCH] ARM: dts: BCM53573: Fix Ethernet info for Luxul devices
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Both Luxul's XAP devices (XAP-810 and XAP-1440) are access points that
-use a non-default design. They don't include switch but have a single
-Ethernet port and BCM54210E PHY connected to the Ethernet controller's
-MDIO bus.
-
-Support for those devices regressed due to two changes:
-
-1. Describing MDIO bus with switch
-After commit 9fb90ae6cae7 ("ARM: dts: BCM53573: Describe on-SoC BCM53125
-rev 4 switch") Linux stopped probing for MDIO devices.
-
-2. Dropping hardcoded BCM54210E delays
-In commit fea7fda7f50a ("net: phy: broadcom: Fix RGMII delays
-configuration for BCM54210E") support for other PHY modes was added but
-that requires a proper "phy-mode" value in DT.
-
-Both above changes are correct (they don't need to be reverted or
-anything) but they need this fix for DT data to be correct and for Linux
-to work properly.
-
-Fixes: 9fb90ae6cae7 ("ARM: dts: BCM53573: Describe on-SoC BCM53125 rev 4 switch")
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
----
- .../boot/dts/broadcom/bcm47189-luxul-xap-1440.dts | 13 +++++++++++++
- .../boot/dts/broadcom/bcm47189-luxul-xap-810.dts | 13 +++++++++++++
- 2 files changed, 26 insertions(+)
-
---- a/arch/arm/boot/dts/bcm47189-luxul-xap-1440.dts
-+++ b/arch/arm/boot/dts/bcm47189-luxul-xap-1440.dts
-@@ -45,3 +45,16 @@
- };
- };
- };
-+
-+&gmac0 {
-+ phy-mode = "rgmii";
-+ phy-handle = <&bcm54210e>;
-+
-+ mdio {
-+ /delete-node/ switch@1e;
-+
-+ bcm54210e: ethernet-phy@0 {
-+ reg = <0>;
-+ };
-+ };
-+};
---- a/arch/arm/boot/dts/bcm47189-luxul-xap-810.dts
-+++ b/arch/arm/boot/dts/bcm47189-luxul-xap-810.dts
-@@ -81,3 +81,16 @@
- };
- };
- };
-+
-+&gmac0 {
-+ phy-mode = "rgmii";
-+ phy-handle = <&bcm54210e>;
-+
-+ mdio {
-+ /delete-node/ switch@1e;
-+
-+ bcm54210e: ethernet-phy@0 {
-+ reg = <0>;
-+ };
-+ };
-+};
+++ /dev/null
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Sun, 23 Jul 2023 19:48:13 +0200
-Subject: [PATCH 1/3] ARM: dts: BCM53573: Fix Tenda AC9 switch CPU port
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Primary Ethernet interface is connected to the port 8 (not 5).
-
-Fixes: 64612828628c ("ARM: dts: BCM53573: Add Tenda AC9 switch ports")
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
----
- arch/arm/boot/dts/broadcom/bcm47189-tenda-ac9.dts | 4 ++--
- 1 file changed, 2 insertions(+), 2 deletions(-)
-
---- a/arch/arm/boot/dts/bcm47189-tenda-ac9.dts
-+++ b/arch/arm/boot/dts/bcm47189-tenda-ac9.dts
-@@ -135,8 +135,8 @@
- label = "lan4";
- };
-
-- port@5 {
-- reg = <5>;
-+ port@8 {
-+ reg = <8>;
- label = "cpu";
- ethernet = <&gmac0>;
- };
+++ /dev/null
-From 7166207bd1d8c46d09d640d46afc685df9bb9083 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Thu, 22 Nov 2018 09:21:49 +0100
-Subject: [PATCH] ARM: dts: BCM5301X: Describe partition formats
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-It's needed by OpenWrt for custom partitioning.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
----
- arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts | 1 +
- 1 file changed, 1 insertion(+)
-
---- a/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
-+++ b/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
-@@ -35,6 +35,7 @@
- partition@0 {
- label = "firmware";
- reg = <0x00000000 0x08000000>;
-+ compatible = "seama";
- };
- };
- };
--- /dev/null
+From 44ad8207806973f4e4f7d870fff36cc01f494250 Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
+Date: Thu, 13 Jul 2023 13:11:45 +0200
+Subject: [PATCH] ARM: dts: BCM53573: Fix Ethernet info for Luxul devices
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+Both Luxul's XAP devices (XAP-810 and XAP-1440) are access points that
+use a non-default design. They don't include switch but have a single
+Ethernet port and BCM54210E PHY connected to the Ethernet controller's
+MDIO bus.
+
+Support for those devices regressed due to two changes:
+
+1. Describing MDIO bus with switch
+After commit 9fb90ae6cae7 ("ARM: dts: BCM53573: Describe on-SoC BCM53125
+rev 4 switch") Linux stopped probing for MDIO devices.
+
+2. Dropping hardcoded BCM54210E delays
+In commit fea7fda7f50a ("net: phy: broadcom: Fix RGMII delays
+configuration for BCM54210E") support for other PHY modes was added but
+that requires a proper "phy-mode" value in DT.
+
+Both above changes are correct (they don't need to be reverted or
+anything) but they need this fix for DT data to be correct and for Linux
+to work properly.
+
+Fixes: 9fb90ae6cae7 ("ARM: dts: BCM53573: Describe on-SoC BCM53125 rev 4 switch")
+Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
+Link: https://lore.kernel.org/r/20230713111145.14864-1-zajec5@gmail.com
+Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
+---
+ .../boot/dts/broadcom/bcm47189-luxul-xap-1440.dts | 13 +++++++++++++
+ .../boot/dts/broadcom/bcm47189-luxul-xap-810.dts | 13 +++++++++++++
+ 2 files changed, 26 insertions(+)
+
+--- a/arch/arm/boot/dts/bcm47189-luxul-xap-1440.dts
++++ b/arch/arm/boot/dts/bcm47189-luxul-xap-1440.dts
+@@ -45,3 +45,16 @@
+ };
+ };
+ };
++
++&gmac0 {
++ phy-mode = "rgmii";
++ phy-handle = <&bcm54210e>;
++
++ mdio {
++ /delete-node/ switch@1e;
++
++ bcm54210e: ethernet-phy@0 {
++ reg = <0>;
++ };
++ };
++};
+--- a/arch/arm/boot/dts/bcm47189-luxul-xap-810.dts
++++ b/arch/arm/boot/dts/bcm47189-luxul-xap-810.dts
+@@ -81,3 +81,16 @@
+ };
+ };
+ };
++
++&gmac0 {
++ phy-mode = "rgmii";
++ phy-handle = <&bcm54210e>;
++
++ mdio {
++ /delete-node/ switch@1e;
++
++ bcm54210e: ethernet-phy@0 {
++ reg = <0>;
++ };
++ };
++};
--- /dev/null
+From 72ec77d74d28be7359ef77971cdee38b60af9e49 Mon Sep 17 00:00:00 2001
+From: Linus Walleij <linus.walleij@linaro.org>
+Date: Thu, 13 Jul 2023 00:16:42 +0200
+Subject: [PATCH] ARM: dts: bcm5301x: Add SEAMA compatibles
+
+This adds SEAMA compatibles to the firmware partition of these
+two D-Link devices.
+
+Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
+Link: https://lore.kernel.org/r/20230713-seama-partitions-v4-2-69e577453d40@linaro.org
+Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
+---
+ arch/arm/boot/dts/broadcom/bcm47094-dlink-dir-885l.dts | 1 +
+ arch/arm/boot/dts/broadcom/bcm47094-dlink-dir-890l.dts | 1 +
+ 2 files changed, 2 insertions(+)
+
+--- a/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
++++ b/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
+@@ -33,6 +33,7 @@
+ #size-cells = <1>;
+
+ partition@0 {
++ compatible = "seama";
+ label = "firmware";
+ reg = <0x00000000 0x08000000>;
+ };
+--- a/arch/arm/boot/dts/bcm47094-dlink-dir-890l.dts
++++ b/arch/arm/boot/dts/bcm47094-dlink-dir-890l.dts
+@@ -149,6 +149,7 @@
+ * partitions: this device uses SEAMA.
+ */
+ firmware@0 {
++ compatible = "seama";
+ label = "firmware";
+ reg = <0x00000000 0x08000000>;
+ };
--- /dev/null
+From 7141209db9c335ab261a17933809a3e660ebdc12 Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
+Date: Sun, 23 Jul 2023 21:54:14 +0200
+Subject: [PATCH] ARM: dts: BCM53573: Fix Tenda AC9 switch CPU port
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+Primary Ethernet interface is connected to the port 8 (not 5).
+
+Fixes: 64612828628c ("ARM: dts: BCM53573: Add Tenda AC9 switch ports")
+Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
+Link: https://lore.kernel.org/r/20230723195416.7831-1-zajec5@gmail.com
+Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
+---
+ arch/arm/boot/dts/broadcom/bcm47189-tenda-ac9.dts | 4 ++--
+ 1 file changed, 2 insertions(+), 2 deletions(-)
+
+--- a/arch/arm/boot/dts/bcm47189-tenda-ac9.dts
++++ b/arch/arm/boot/dts/bcm47189-tenda-ac9.dts
+@@ -135,8 +135,8 @@
+ label = "lan4";
+ };
+
+- port@5 {
+- reg = <5>;
++ port@8 {
++ reg = <8>;
+ label = "cpu";
+ ethernet = <&gmac0>;
+ };
--- /dev/null
+From 8d6b61ecad2f1c939813c5c4517d53e04672dc48 Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
+Date: Sun, 23 Jul 2023 21:54:15 +0200
+Subject: [PATCH] ARM: dts: BCM53573: Describe BCM53125 switch ports in the
+ main DTS
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+BCM53125 always has 5 ports with GPHYs (for LAN/WAN ports) and 2 IMP
+ports. It seems the best place to describe that in the main .dtsi.
+Device specific bits can go to device .dts files. This will help
+avoiding some code duplication.
+
+Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
+Link: https://lore.kernel.org/r/20230723195416.7831-2-zajec5@gmail.com
+Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
+---
+ .../boot/dts/broadcom/bcm47189-tenda-ac9.dts | 7 -----
+ arch/arm/boot/dts/broadcom/bcm53573.dtsi | 26 ++++++++++++++++++-
+ 2 files changed, 25 insertions(+), 8 deletions(-)
+
+--- a/arch/arm/boot/dts/bcm47189-tenda-ac9.dts
++++ b/arch/arm/boot/dts/bcm47189-tenda-ac9.dts
+@@ -111,34 +111,27 @@
+
+ ports {
+ port@0 {
+- reg = <0>;
+ label = "wan";
+ };
+
+ port@1 {
+- reg = <1>;
+ label = "lan1";
+ };
+
+ port@2 {
+- reg = <2>;
+ label = "lan2";
+ };
+
+ port@3 {
+- reg = <3>;
+ label = "lan3";
+ };
+
+ port@4 {
+- reg = <4>;
+ label = "lan4";
+ };
+
+ port@8 {
+- reg = <8>;
+ label = "cpu";
+- ethernet = <&gmac0>;
+ };
+ };
+ };
+--- a/arch/arm/boot/dts/bcm53573.dtsi
++++ b/arch/arm/boot/dts/bcm53573.dtsi
+@@ -192,10 +192,34 @@
+
+ status = "disabled";
+
+- /* ports are defined in board DTS */
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
++
++ port@0 {
++ reg = <0>;
++ };
++
++ port@1 {
++ reg = <1>;
++ };
++
++ port@2 {
++ reg = <2>;
++ };
++
++ port@3 {
++ reg = <3>;
++ };
++
++ port@4 {
++ reg = <4>;
++ };
++
++ port@8 {
++ reg = <8>;
++ ethernet = <&gmac0>;
++ };
+ };
+ };
+ };
--- /dev/null
+From d95b1caeea194962220db1778ce7fe71cdba788b Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
+Date: Sun, 23 Jul 2023 21:54:16 +0200
+Subject: [PATCH] ARM: dts: BCM53573: Add BCM53125 switch port 5
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+It's connected to the extra Ethernet interface.
+
+Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
+Link: https://lore.kernel.org/r/20230723195416.7831-3-zajec5@gmail.com
+Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
+---
+ arch/arm/boot/dts/broadcom/bcm53573.dtsi | 10 ++++++++++
+ 1 file changed, 10 insertions(+)
+
+--- a/arch/arm/boot/dts/bcm53573.dtsi
++++ b/arch/arm/boot/dts/bcm53573.dtsi
+@@ -216,6 +216,16 @@
+ reg = <4>;
+ };
+
++ port@5 {
++ reg = <5>;
++ ethernet = <&gmac1>;
++
++ fixed-link {
++ speed = <1000>;
++ full-duplex;
++ };
++ };
++
+ port@8 {
+ reg = <8>;
+ ethernet = <&gmac0>;
--- /dev/null
+From e0ae343a2c1b782a346d9b844ea65e1d49c428b2 Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
+Date: Mon, 24 Jul 2023 12:12:27 +0200
+Subject: [PATCH] ARM: dts: BCM53573: Add Ethernet interfaces links
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+BCM53573 has 2 Ethernet interfaces each connected to one of switch ports
+in the default design. They both use fixed links.
+
+An exception are Luxul XAP devices that have switch replaced by a single
+PHY.
+
+Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
+Link: https://lore.kernel.org/r/20230724101227.5420-1-zajec5@gmail.com
+Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
+---
+ .../boot/dts/broadcom/bcm47189-luxul-xap-1440.dts | 2 ++
+ .../arm/boot/dts/broadcom/bcm47189-luxul-xap-810.dts | 2 ++
+ arch/arm/boot/dts/broadcom/bcm53573.dtsi | 12 ++++++++++++
+ 3 files changed, 16 insertions(+)
+
+--- a/arch/arm/boot/dts/bcm47189-luxul-xap-1440.dts
++++ b/arch/arm/boot/dts/bcm47189-luxul-xap-1440.dts
+@@ -50,6 +50,8 @@
+ phy-mode = "rgmii";
+ phy-handle = <&bcm54210e>;
+
++ /delete-node/ fixed-link;
++
+ mdio {
+ /delete-node/ switch@1e;
+
+--- a/arch/arm/boot/dts/bcm47189-luxul-xap-810.dts
++++ b/arch/arm/boot/dts/bcm47189-luxul-xap-810.dts
+@@ -86,6 +86,8 @@
+ phy-mode = "rgmii";
+ phy-handle = <&bcm54210e>;
+
++ /delete-node/ fixed-link;
++
+ mdio {
+ /delete-node/ switch@1e;
+
+--- a/arch/arm/boot/dts/bcm53573.dtsi
++++ b/arch/arm/boot/dts/bcm53573.dtsi
+@@ -181,6 +181,12 @@
+
+ gmac0: ethernet@5000 {
+ reg = <0x5000 0x1000>;
++ phy-mode = "internal";
++
++ fixed-link {
++ speed = <1000>;
++ full-duplex;
++ };
+
+ mdio {
+ #address-cells = <1>;
+@@ -237,6 +243,12 @@
+
+ gmac1: ethernet@b000 {
+ reg = <0xb000 0x1000>;
++ phy-mode = "internal";
++
++ fixed-link {
++ speed = <1000>;
++ full-duplex;
++ };
+ };
+
+ pmu@12000 {
--- /dev/null
+From d8835601e3c306fda78f8736f1aef688e99e892d Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
+Date: Mon, 24 Jul 2023 12:11:59 +0200
+Subject: [PATCH] ARM: dts: BCM53573: Disable second Ethernet on Luxul devices
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+XAP-810 and XAP-1440 both have a single Ethernet port and BCM54210E PHY.
+Their second Ethernet interface is not connected to anything.
+
+Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
+Link: https://lore.kernel.org/r/20230724101159.5289-1-zajec5@gmail.com
+Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
+---
+ arch/arm/boot/dts/broadcom/bcm47189-luxul-xap-1440.dts | 4 ++++
+ arch/arm/boot/dts/broadcom/bcm47189-luxul-xap-810.dts | 4 ++++
+ 2 files changed, 8 insertions(+)
+
+--- a/arch/arm/boot/dts/bcm47189-luxul-xap-1440.dts
++++ b/arch/arm/boot/dts/bcm47189-luxul-xap-1440.dts
+@@ -60,3 +60,7 @@
+ };
+ };
+ };
++
++&gmac1 {
++ status = "disabled";
++};
+--- a/arch/arm/boot/dts/bcm47189-luxul-xap-810.dts
++++ b/arch/arm/boot/dts/bcm47189-luxul-xap-810.dts
+@@ -96,3 +96,7 @@
+ };
+ };
+ };
++
++&gmac1 {
++ status = "disabled";
++};
+++ /dev/null
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Thu, 13 Jul 2023 13:05:44 +0200
-Subject: [PATCH] ARM: dts: BCM53573: Fix Ethernet info for Luxul devices
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Both Luxul's XAP devices (XAP-810 and XAP-1440) are access points that
-use a non-default design. They don't include switch but have a single
-Ethernet port and BCM54210E PHY connected to the Ethernet controller's
-MDIO bus.
-
-Support for those devices regressed due to two changes:
-
-1. Describing MDIO bus with switch
-After commit 9fb90ae6cae7 ("ARM: dts: BCM53573: Describe on-SoC BCM53125
-rev 4 switch") Linux stopped probing for MDIO devices.
-
-2. Dropping hardcoded BCM54210E delays
-In commit fea7fda7f50a ("net: phy: broadcom: Fix RGMII delays
-configuration for BCM54210E") support for other PHY modes was added but
-that requires a proper "phy-mode" value in DT.
-
-Both above changes are correct (they don't need to be reverted or
-anything) but they need this fix for DT data to be correct and for Linux
-to work properly.
-
-Fixes: 9fb90ae6cae7 ("ARM: dts: BCM53573: Describe on-SoC BCM53125 rev 4 switch")
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
----
- .../boot/dts/broadcom/bcm47189-luxul-xap-1440.dts | 13 +++++++++++++
- .../boot/dts/broadcom/bcm47189-luxul-xap-810.dts | 13 +++++++++++++
- 2 files changed, 26 insertions(+)
-
---- a/arch/arm/boot/dts/bcm47189-luxul-xap-1440.dts
-+++ b/arch/arm/boot/dts/bcm47189-luxul-xap-1440.dts
-@@ -45,3 +45,16 @@
- };
- };
- };
-+
-+&gmac0 {
-+ phy-mode = "rgmii";
-+ phy-handle = <&bcm54210e>;
-+
-+ mdio {
-+ /delete-node/ switch@1e;
-+
-+ bcm54210e: ethernet-phy@0 {
-+ reg = <0>;
-+ };
-+ };
-+};
---- a/arch/arm/boot/dts/bcm47189-luxul-xap-810.dts
-+++ b/arch/arm/boot/dts/bcm47189-luxul-xap-810.dts
-@@ -81,3 +81,16 @@
- };
- };
- };
-+
-+&gmac0 {
-+ phy-mode = "rgmii";
-+ phy-handle = <&bcm54210e>;
-+
-+ mdio {
-+ /delete-node/ switch@1e;
-+
-+ bcm54210e: ethernet-phy@0 {
-+ reg = <0>;
-+ };
-+ };
-+};
+++ /dev/null
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Sun, 23 Jul 2023 19:48:13 +0200
-Subject: [PATCH 1/3] ARM: dts: BCM53573: Fix Tenda AC9 switch CPU port
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Primary Ethernet interface is connected to the port 8 (not 5).
-
-Fixes: 64612828628c ("ARM: dts: BCM53573: Add Tenda AC9 switch ports")
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
----
- arch/arm/boot/dts/broadcom/bcm47189-tenda-ac9.dts | 4 ++--
- 1 file changed, 2 insertions(+), 2 deletions(-)
-
---- a/arch/arm/boot/dts/bcm47189-tenda-ac9.dts
-+++ b/arch/arm/boot/dts/bcm47189-tenda-ac9.dts
-@@ -135,8 +135,8 @@
- label = "lan4";
- };
-
-- port@5 {
-- reg = <5>;
-+ port@8 {
-+ reg = <8>;
- label = "cpu";
- ethernet = <&gmac0>;
- };
+++ /dev/null
-From 7166207bd1d8c46d09d640d46afc685df9bb9083 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Thu, 22 Nov 2018 09:21:49 +0100
-Subject: [PATCH] ARM: dts: BCM5301X: Describe partition formats
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-It's needed by OpenWrt for custom partitioning.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
----
- arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts | 1 +
- 1 file changed, 1 insertion(+)
-
---- a/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
-+++ b/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
-@@ -35,6 +35,7 @@
- partition@0 {
- label = "firmware";
- reg = <0x00000000 0x08000000>;
-+ compatible = "seama";
- };
- };
- };
projects / openwrt / staging / hauke.git / commitdiff