target/linux/ramips/dts/rt5350_airlive_air3gii.dts

   1 #include "rt5350.dtsi"
   2
   3 #include <dt-bindings/gpio/gpio.h>
   4 #include <dt-bindings/input/input.h>
   5
   6 / {
   7         compatible = "airlive,air3gii", "ralink,rt5350-soc";
   8         model = "AirLive Air3GII";
   9
  10         leds {
  11                 compatible = "gpio-leds";
  12
  13                 wlan {
  14                         label = "green:wlan";
  15                         gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>;
  16                 };
  17
  18                 mobile {
  19                         label = "green:mobile";
  20                         gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
  21                         trigger-sources = <&ohci_port1>, <&ehci_port1>;
  22                         linux,default-trigger = "usbport";
  23                 };
  24         };
  25
  26         keys {
  27                 compatible = "gpio-keys-polled";
  28                 poll-interval = <20>;
  29
  30                 wps {
  31                         label = "wps";
  32                         gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
  33                         linux,code = <KEY_WPS_BUTTON>;
  34                 };
  35         };
  36 };
  37
  38 &spi0 {
  39         status = "okay";
  40
  41         flash@0 {
  42                 compatible = "jedec,spi-nor";
  43                 reg = <0>;
  44                 spi-max-frequency = <10000000>;
  45
  46                 partitions {
  47                         compatible = "fixed-partitions";
  48                         #address-cells = <1>;
  49                         #size-cells = <1>;
  50
  51                         partition@0 {
  52                                 label = "u-boot";
  53                                 reg = <0x0 0x30000>;
  54                                 read-only;
  55                         };
  56
  57                         partition@30000 {
  58                                 label = "u-boot-env";
  59                                 reg = <0x30000 0x10000>;
  60                                 read-only;
  61                         };
  62
  63                         factory: partition@40000 {
  64                                 compatible = "nvmem-cells";
  65                                 label = "factory";
  66                                 reg = <0x40000 0x10000>;
  67                                 #address-cells = <1>;
  68                                 #size-cells = <1>;
  69                                 read-only;
  70
  71                                 eeprom_factory_0: eeprom@0 {
  72                                         reg = <0x0 0x200>;
  73                                 };
  74
  75                                 macaddr_factory_4: macaddr@4 {
  76                                         reg = <0x4 0x6>;
  77                                 };
  78                         };
  79
  80                         partition@50000 {
  81                                 compatible = "denx,uimage";
  82                                 label = "firmware";
  83                                 reg = <0x50000 0x3b0000>;
  84                         };
  85                 };
  86         };
  87 };
  88
  89 &state_default {
  90         gpio {
  91                 groups = "i2c", "jtag", "uartf";
  92                 function = "gpio";
  93         };
  94 };
  95
  96 &ethernet {
  97         nvmem-cells = <&macaddr_factory_4>;
  98         nvmem-cell-names = "mac-address";
  99 };
 100
 101 &esw {
 102         mediatek,portmap = <0x2f>;
 103 };
 104
 105 &wmac {
 106         nvmem-cells = <&eeprom_factory_0>;
 107         nvmem-cell-names = "eeprom";
 108 };