target/linux/ramips/dts/rt3052_omnima_miniembwifi.dts

   1 #include "rt3050.dtsi"
   2
   3 #include <dt-bindings/gpio/gpio.h>
   4 #include <dt-bindings/input/input.h>
   5
   6 / {
   7         compatible = "omnima,miniembwifi", "ralink,rt3052-soc";
   8         model = "Omnima MiniEMBWiFi";
   9
  10         aliases {
  11                 led-boot = &led_status;
  12                 led-failsafe = &led_status;
  13                 led-running = &led_status;
  14                 led-upgrade = &led_status;
  15         };
  16
  17         leds {
  18                 compatible = "gpio-leds";
  19
  20                 led_status: status {
  21                         label = "green:status";
  22                         gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
  23                 };
  24
  25                 wlan {
  26                         label = "green:wlan";
  27                         gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
  28                 };
  29         };
  30
  31         keys {
  32                 compatible = "gpio-keys-polled";
  33                 poll-interval = <20>;
  34
  35                 reset {
  36                         label = "reset";
  37                         gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
  38                         linux,code = <KEY_RESTART>;
  39                 };
  40         };
  41
  42         flash@1f000000 {
  43                 compatible = "cfi-flash";
  44                 reg = <0x1f000000 0x800000>;
  45                 bank-width = <2>;
  46                 device-width = <2>;
  47
  48                 partitions {
  49                         compatible = "fixed-partitions";
  50                         #address-cells = <1>;
  51                         #size-cells = <1>;
  52
  53                         partition@0 {
  54                                 label = "u-boot";
  55                                 reg = <0x0 0x30000>;
  56                                 read-only;
  57                         };
  58
  59                         partition@30000 {
  60                                 label = "u-boot-env";
  61                                 reg = <0x30000 0x10000>;
  62                                 read-only;
  63                         };
  64
  65                         factory: partition@40000 {
  66                                 compatible = "nvmem-cells";
  67                                 label = "factory";
  68                                 reg = <0x40000 0x10000>;
  69                                 #address-cells = <1>;
  70                                 #size-cells = <1>;
  71                                 read-only;
  72
  73                                 eeprom_factory_0: eeprom@0 {
  74                                         reg = <0x0 0x200>;
  75                                 };
  76
  77                                 macaddr_factory_28: macaddr@28 {
  78                                         reg = <0x28 0x6>;
  79                                 };
  80                         };
  81
  82                         partition@50000 {
  83                                 compatible = "denx,uimage";
  84                                 label = "firmware";
  85                                 reg = <0x50000 0x7b0000>;
  86                         };
  87                 };
  88         };
  89 };
  90
  91 &state_default {
  92         gpio {
  93                 groups = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
  94                 function = "gpio";
  95         };
  96 };
  97
  98 &ethernet {
  99         nvmem-cells = <&macaddr_factory_28>;
 100         nvmem-cell-names = "mac-address";
 101 };
 102
 103 &esw {
 104         mediatek,portmap = <0x2f>;
 105 };
 106
 107 &wmac {
 108         nvmem-cells = <&eeprom_factory_0>;
 109         nvmem-cell-names = "eeprom";
 110 };
 111
 112 &otg {
 113         status = "okay";
 114 };