target/linux/ramips/dts/mt7628an_tplink_re305-v1.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2
   3 #include "mt7628an_tplink_re305.dtsi"
   4
   5 / {
   6         compatible = "tplink,re305-v1", "mediatek,mt7628an-soc";
   7         model = "TP-Link RE305 v1";
   8 };
   9
  10 &spi0 {
  11         status = "okay";
  12
  13         flash@0 {
  14                 compatible = "jedec,spi-nor";
  15                 reg = <0>;
  16                 spi-max-frequency = <50000000>;
  17
  18                 partitions {
  19                         compatible = "fixed-partitions";
  20                         #address-cells = <1>;
  21                         #size-cells = <1>;
  22
  23                         partition@0 {
  24                                 label = "u-boot";
  25                                 reg = <0x0 0x20000>;
  26                                 read-only;
  27                         };
  28
  29                         partition@20000 {
  30                                 compatible = "tplink,firmware";
  31                                 label = "firmware";
  32                                 reg = <0x20000 0x5e0000>;
  33                         };
  34
  35                         config: partition@600000 {
  36                                 compatible = "nvmem-cells";
  37                                 label = "config";
  38                                 reg = <0x600000 0x50000>;
  39                                 #address-cells = <1>;
  40                                 #size-cells = <1>;
  41                                 read-only;
  42
  43                                 macaddr_config_10008: macaddr@10008 {
  44                                         reg = <0x10008 0x6>;
  45                                 };
  46                         };
  47
  48                         /*
  49                                 The flash space between 0x650000 and 0x7f0000 is blank in the
  50                                 stock firmware so it is left out as well.
  51                         */
  52
  53                         radio: partition@7f0000 {
  54                                 compatible = "nvmem-cells";
  55                                 label = "radio";
  56                                 reg = <0x7f0000 0x10000>;
  57                                 #address-cells = <1>;
  58                                 #size-cells = <1>;
  59                                 read-only;
  60
  61                                 eeprom_radio_0: eeprom@0 {
  62                                         reg = <0x0 0x400>;
  63                                 };
  64
  65                                 eeprom_radio_8000: eeprom@8000 {
  66                                         reg = <0x8000 0x200>;
  67                                 };
  68                         };
  69                 };
  70         };
  71 };
  72
  73 &wlan5g {
  74         nvmem-cells = <&eeprom_radio_8000>, <&macaddr_config_10008>;
  75         nvmem-cell-names = "eeprom", "mac-address";
  76         mac-address-increment = <2>;
  77 };
  78
  79 &wmac {
  80         nvmem-cells = <&eeprom_radio_0>, <&macaddr_config_10008>;
  81         nvmem-cell-names = "eeprom", "mac-address";
  82         mac-address-increment = <1>;
  83 };
  84
  85 &ethernet {
  86         nvmem-cells = <&macaddr_config_10008>;
  87         nvmem-cell-names = "mac-address";
  88 };