target/linux/ramips/dts/mt7621_tplink_archer-ax23-v1.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2
   3 #include "mt7621.dtsi"
   4
   5 #include <dt-bindings/gpio/gpio.h>
   6 #include <dt-bindings/input/input.h>
   7
   8 / {
   9         compatible = "tplink,archer-ax23-v1", "mediatek,mt7621-soc";
  10         model = "TP-Link Archer AX23 v1";
  11
  12         aliases {
  13                 led-boot = &led_power;
  14                 led-failsafe = &led_power;
  15                 led-running = &led_power;
  16                 led-upgrade = &led_power;
  17                 label-mac-device = &gmac0;
  18         };
  19
  20         chosen {
  21                 bootargs = "console=ttyS0,115200";
  22         };
  23
  24         keys {
  25                 compatible = "gpio-keys";
  26
  27                 reset {
  28                         label = "reset";
  29                         gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
  30                         linux,code = <KEY_RESTART>;
  31                 };
  32
  33                 wps {
  34                         label = "rfkill";
  35                         gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
  36                         linux,code = <KEY_RFKILL>;
  37                 };
  38         };
  39
  40         leds {
  41                 compatible = "gpio-leds";
  42
  43                 led_power: power {
  44                         label = "green:power";
  45                         gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
  46                 };
  47
  48                 wifi2g {
  49                         label = "green:wifi2g";
  50                         gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
  51                         linux,default-trigger = "phy0tpt";
  52                 };
  53
  54                 wifi5g {
  55                         label = "green:wifi5g";
  56                         gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
  57                         linux,default-trigger = "phy1tpt";
  58                 };
  59
  60                 wan-green {
  61                         label = "green:wan";
  62                         gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
  63                 };
  64
  65                 wan-orange {
  66                         label = "orange:wan";
  67                         gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
  68                 };
  69
  70                 lan {
  71                         label = "green:lan";
  72                         gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
  73                 };
  74
  75                 wps {
  76                         label = "green:wps";
  77                         gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
  78                 };
  79         };
  80 };
  81
  82 &spi0 {
  83         status = "okay";
  84
  85         flash@0 {
  86                 compatible = "jedec,spi-nor";
  87                 reg = <0>;
  88                 spi-max-frequency = <25000000>;
  89
  90                 partitions {
  91                         compatible = "fixed-partitions";
  92                         #address-cells = <1>;
  93                         #size-cells = <1>;
  94
  95                         partition@0 {
  96                                 label = "u-boot";
  97                                 reg = <0x000000 0x040000>;
  98                                 read-only;
  99                         };
 100
 101                         partition@40000 {
 102                                 compatible = "denx,uimage";
 103                                 label = "firmware";
 104                                 reg = <0x040000 0xf60000>;
 105                         };
 106
 107                         config: partition@fa0000 {
 108                                 label = "config";
 109                                 reg = <0xfa0000 0x010000>;
 110                                 read-only;
 111
 112                                 nvmem-layout {
 113                                         compatible = "fixed-layout";
 114                                         #address-cells = <1>;
 115                                         #size-cells = <1>;
 116
 117                                         macaddr_config_8: macaddr@8 {
 118                                                 reg = <0x8 0x6>;
 119                                         };
 120                                 };
 121                         };
 122
 123                         partition@fb0000 {
 124                                 label = "tplink";
 125                                 reg = <0xfb0000 0x040000>;
 126                                 read-only;
 127                         };
 128
 129                         radio: partition@ff0000 {
 130                                 label = "radio";
 131                                 reg = <0xff0000 0x010000>;
 132                                 read-only;
 133                         };
 134                 };
 135         };
 136 };
 137
 138 &pcie {
 139         status = "okay";
 140 };
 141
 142 &pcie1 {
 143         wifi@0,0 {
 144                 compatible = "mediatek,mt76";
 145                 reg = <0x0000 0 0 0 0>;
 146                 mediatek,mtd-eeprom = <&radio 0x0>;
 147                 nvmem-cells = <&macaddr_config_8>;
 148                 nvmem-cell-names = "mac-address";
 149                 mediatek,disable-radar-background;
 150         };
 151 };
 152
 153 &gmac0 {
 154         nvmem-cells = <&macaddr_config_8>;
 155         nvmem-cell-names = "mac-address";
 156 };
 157
 158 &gmac1 {
 159         status = "okay";
 160         label = "wan";
 161         phy-handle = <&ethphy4>;
 162
 163         nvmem-cells = <&macaddr_config_8>;
 164         nvmem-cell-names = "mac-address";
 165         mac-address-increment = <1>;
 166 };
 167
 168 &mdio {
 169         ethphy4: ethernet-phy@4 {
 170                 reg = <4>;
 171         };
 172 };
 173
 174 &switch0 {
 175         ports {
 176                 port@0 {
 177                         status = "okay";
 178                         label = "lan1";
 179                 };
 180
 181                 port@1 {
 182                         status = "okay";
 183                         label = "lan2";
 184                 };
 185
 186                 port@2 {
 187                         status = "okay";
 188                         label = "lan3";
 189                 };
 190
 191                 port@3 {
 192                         status = "okay";
 193                         label = "lan4";
 194                 };
 195         };
 196 };
 197
 198 &state_default {
 199         gpio {
 200                 groups = "i2c", "uart3", "jtag", "wdt";
 201                 function = "gpio";
 202         };
 203 };