target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-mf289f.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2 // Copyright (c) 2022, Pawel Dembicki <paweldembicki@gmail.com>.
   3 // Copyright (c) 2022, Giammarco Marzano <stich86@gmail.com>.
   4
   5 #include "qcom-ipq4019.dtsi"
   6 #include <dt-bindings/soc/qcom,tcsr.h>
   7 #include <dt-bindings/gpio/gpio.h>
   8 #include <dt-bindings/input/input.h>
   9 #include <dt-bindings/leds/common.h>
  10
  11 / {
  12         model = "ZTE MF289F";
  13         compatible = "zte,mf289f";
  14
  15         aliases {
  16                 led-boot = &led_status;
  17                 led-failsafe = &led_status;
  18                 led-running = &led_status;
  19                 led-upgrade = &led_status;
  20         };
  21
  22         chosen {
  23                 /*
  24                  * bootargs forced by u-boot bootipq command:
  25                  * 'ubi.mtd=rootfs root=mtd:ubi_rootfs rootfstype=squashfs rootwait'
  26                  */
  27                 bootargs-append = " root=/dev/ubiblock0_1";
  28         };
  29
  30         /*
  31          * This node is used to restart modem module to avoid anomalous
  32          * behaviours on initial communication.
  33          */
  34         gpio-restart {
  35                 compatible = "gpio-restart";
  36                 gpios = <&tlmm 8 GPIO_ACTIVE_HIGH>;
  37         };
  38
  39         leds {
  40                 compatible = "gpio-leds";
  41
  42                 led_status: led-0 {
  43                         label = "blue:power";
  44                         function = LED_FUNCTION_POWER;
  45                         color = <LED_COLOR_ID_BLUE>;
  46                         gpios = <&tlmm 35 GPIO_ACTIVE_LOW>;
  47                 };
  48
  49                 led-1 {
  50                         function = LED_FUNCTION_WLAN;
  51                         color = <LED_COLOR_ID_BLUE>;
  52                         gpios = <&tlmm 61 GPIO_ACTIVE_LOW>;
  53                         linux,default-trigger = "phy0tpt";
  54                 };
  55         };
  56
  57         keys {
  58                 compatible = "gpio-keys";
  59
  60                 key-reset {
  61                         label = "reset";
  62                         linux,code = <KEY_RESTART>;
  63                         gpios = <&tlmm 18 GPIO_ACTIVE_LOW>;
  64                 };
  65
  66                 key-wps {
  67                         label = "wps";
  68                         linux,code = <KEY_WPS_BUTTON>;
  69                         gpios = <&tlmm 68 GPIO_ACTIVE_LOW>;
  70                 };
  71         };
  72
  73         soc {
  74                 tcsr@1949000 {
  75                         compatible = "qcom,tcsr";
  76                         reg = <0x1949000 0x100>;
  77                         qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
  78                 };
  79
  80                 tcsr@194b000 {
  81                         /* select hostmode */
  82                         compatible = "qcom,tcsr";
  83                         reg = <0x194b000 0x100>;
  84                         qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
  85                         status = "okay";
  86                 };
  87
  88                 ess_tcsr@1953000 {
  89                         compatible = "qcom,tcsr";
  90                         reg = <0x1953000 0x1000>;
  91                         qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
  92                 };
  93
  94                 tcsr@1957000 {
  95                         compatible = "qcom,tcsr";
  96                         reg = <0x1957000 0x100>;
  97                         qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
  98                 };
  99         };
 100 };
 101
 102 &prng {
 103         status = "okay";
 104 };
 105
 106 &mdio {
 107         status = "okay";
 108         pinctrl-0 = <&mdio_pins>;
 109         pinctrl-names = "default";
 110         reset-gpios = <&tlmm 47 GPIO_ACTIVE_LOW>;
 111         reset-delay-us = <2000>;
 112 };
 113
 114 &watchdog {
 115         status = "okay";
 116 };
 117
 118 &blsp_dma {
 119         status = "okay";
 120 };
 121
 122 &usb2 {
 123         status = "okay";
 124 };
 125
 126 &usb3 {
 127         status = "okay";
 128 };
 129
 130 &blsp1_spi1 {
 131         pinctrl-0 = <&spi_0_pins>;
 132         pinctrl-names = "default";
 133         status = "okay";
 134         cs-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>,
 135                    <&tlmm 54 GPIO_ACTIVE_HIGH>;
 136
 137         flash@0 {
 138                 compatible = "jedec,spi-nor";
 139                 #address-cells = <1>;
 140                 #size-cells = <1>;
 141                 reg = <0>;
 142                 spi-max-frequency = <24000000>;
 143
 144                 partitions {
 145                         compatible = "fixed-partitions";
 146                         #address-cells = <1>;
 147                         #size-cells = <1>;
 148
 149                         partition@0 {
 150                                 label = "0:SBL1";
 151                                 reg = <0x0 0x40000>;
 152                                 read-only;
 153                         };
 154
 155                         partition@40000 {
 156                                 label = "0:MIBIB";
 157                                 reg = <0x40000 0x20000>;
 158                                 read-only;
 159                         };
 160
 161                         partition@60000 {
 162                                 label = "0:QSEE";
 163                                 reg = <0x60000 0x60000>;
 164                                 read-only;
 165                         };
 166
 167                         partition@c0000 {
 168                                 label = "0:CDT";
 169                                 reg = <0xc0000 0x10000>;
 170                                 read-only;
 171                         };
 172
 173                         partition@d0000 {
 174                                 label = "0:DDRPARAMS";
 175                                 reg = <0xd0000 0x10000>;
 176                                 read-only;
 177                         };
 178
 179                         partition@e0000 {
 180                                 label = "0:APPSBLENV";
 181                                 reg = <0xe0000 0x10000>;
 182                                 read-only;
 183                         };
 184
 185                         partition@f0000 {
 186                                 label = "0:APPSBL";
 187                                 reg = <0xf0000 0xc0000>;
 188                                 read-only;
 189                         };
 190
 191                         partition@1b0000 {
 192                                 label = "0:reserved1";
 193                                 reg = <0x1b0000 0x50000>;
 194                                 read-only;
 195                         };
 196                 };
 197         };
 198
 199         spi-nand@1 { /* flash@1 ? */
 200                 compatible = "spi-nand";
 201                 reg = <1>;
 202                 spi-max-frequency = <24000000>;
 203
 204                 partitions {
 205                         compatible = "fixed-partitions";
 206                         #address-cells = <1>;
 207                         #size-cells = <1>;
 208
 209                         partition@0 {
 210                                 label = "fota-flag";
 211                                 reg = <0x0 0xa0000>;
 212                                 read-only;
 213                         };
 214
 215                         partition@a0000 {
 216                                 label = "ART";
 217                                 reg = <0xa0000 0x80000>;
 218                                 read-only;
 219
 220                                 nvmem-layout {
 221                                         compatible = "fixed-layout";
 222                                         #address-cells = <1>;
 223                                         #size-cells = <1>;
 224
 225                                         precal_art_1000: precal@1000 {
 226                                                 reg = <0x1000 0x2f20>;
 227                                         };
 228
 229                                         precal_art_5000: precal@5000 {
 230                                                 reg = <0x5000 0x2f20>;
 231                                         };
 232                                 };
 233                         };
 234
 235                         partition@120000 {
 236                                 label = "mac";
 237                                 reg = <0x120000 0x80000>;
 238                                 read-only;
 239
 240                                 nvmem-layout {
 241                                         compatible = "fixed-layout";
 242                                         #address-cells = <1>;
 243                                         #size-cells = <1>;
 244
 245                                         macaddr_mac_0: macaddr@0 {
 246                                                 reg = <0x0 0x6>;
 247                                         };
 248                                 };
 249                         };
 250
 251                         partition@1a0000 {
 252                                 label = "reserved2";
 253                                 reg = <0x1a0000 0xc0000>;
 254                                 read-only;
 255                         };
 256
 257                         partition@260000 {
 258                                 label = "cfg-param";
 259                                 reg = <0x260000 0x400000>;
 260                                 read-only;
 261                         };
 262
 263                         partition@660000 {
 264                                 label = "log";
 265                                 reg = <0x660000 0x400000>;
 266                         };
 267
 268                         partition@a60000 {
 269                                 label = "oops";
 270                                 reg = <0xa60000 0xa0000>;
 271                         };
 272
 273                         partition@b00000 {
 274                                 label = "reserved3";
 275                                 reg = <0xb00000 0x500000>;
 276                                 read-only;
 277                         };
 278
 279                         partition@1000000 {
 280                                 label = "web";
 281                                 reg = <0x1000000 0x800000>;
 282                         };
 283
 284                         partition@1800000 {
 285                                 label = "rootfs";
 286                                 reg = <0x1800000 0x1d00000>;
 287                         };
 288
 289                         partition@3500000 {
 290                                 label = "data";
 291                                 reg = <0x3500000 0x1900000>;
 292                         };
 293
 294                         partition@4e00000 {
 295                                 label = "fota";
 296                                 reg = <0x4e00000 0x3200000>;
 297                         };
 298                 };
 299         };
 300 };
 301
 302 &blsp1_uart1 {
 303         pinctrl-0 = <&serial_pins>;
 304         pinctrl-names = "default";
 305         status = "okay";
 306 };
 307
 308 &crypto {
 309         status = "okay";
 310 };
 311
 312 &cryptobam {
 313         status = "okay";
 314 };
 315
 316 &gmac {
 317         status = "okay";
 318         nvmem-cell-names = "mac-address";
 319         nvmem-cells = <&macaddr_mac_0>;
 320 };
 321
 322 &switch {
 323         status = "okay";
 324 };
 325
 326 &swport2 {
 327         status = "okay";
 328
 329         label = "wan";
 330
 331         nvmem-cell-names = "mac-address";
 332         nvmem-cells = <&macaddr_mac_0>;
 333         mac-address-increment = <1>;
 334 };
 335
 336 &swport5 {
 337         status = "okay";
 338
 339         label = "lan";
 340 };
 341
 342 &qpic_bam {
 343         status = "okay";
 344 };
 345
 346 &tlmm {
 347         i2c_0_pins: i2c_0_pinmux {
 348                 mux {
 349                         pins = "gpio20", "gpio21";
 350                         function = "blsp_i2c0";
 351                         bias-disable;
 352                 };
 353         };
 354
 355         mdio_pins: mdio_pinmux {
 356                 mux_1 {
 357                         pins = "gpio6";
 358                         function = "mdio";
 359                         bias-pull-up;
 360                 };
 361
 362                 mux_2 {
 363                         pins = "gpio7";
 364                         function = "mdc";
 365                         bias-pull-up;
 366                 };
 367         };
 368
 369         serial_pins: serial_pinmux {
 370                 mux {
 371                         pins = "gpio16", "gpio17";
 372                         function = "blsp_uart0";
 373                         bias-disable;
 374                 };
 375         };
 376
 377         spi_0_pins: spi_0_pinmux {
 378                 pinmux {
 379                         function = "blsp_spi0";
 380                         pins = "gpio13", "gpio14", "gpio15";
 381                         drive-strength = <12>;
 382                         bias-disable;
 383                 };
 384
 385                 pinmux_cs {
 386                         function = "gpio";
 387                         pins = "gpio12", "gpio54";
 388                         drive-strength = <2>;
 389                         bias-disable;
 390                         output-high;
 391                 };
 392         };
 393 };
 394
 395 &usb2_hs_phy {
 396         status = "okay";
 397 };
 398
 399 &usb3_ss_phy {
 400         status = "okay";
 401 };
 402
 403 &usb3_hs_phy {
 404         status = "okay";
 405 };
 406
 407 &wifi0 {
 408         status = "okay";
 409         nvmem-cell-names = "pre-calibration", "mac-address";
 410         nvmem-cells = <&precal_art_1000>, <&macaddr_mac_0>;
 411         mac-address-increment = <2>;
 412         qcom,ath10k-calibration-variant = "zte,mf289f";
 413 };
 414
 415 /* This node is used only on AT2 version for 5Ghz on IPQ4019 with board-id=21 */
 416 &wifi1 {
 417         status = "okay";
 418         nvmem-cell-names = "pre-calibration", "mac-address";
 419         nvmem-cells = <&precal_art_5000>, <&macaddr_mac_0>;
 420         mac-address-increment = <3>;
 421         qcom,ath10k-calibration-variant = "zte,mf289f";
 422 };
 423
 424 /* This node is used only on AT1 version for 5Ghz on QCA9984 */
 425 &pcie0 {
 426         status = "okay";
 427         perst-gpio = <&tlmm 38 GPIO_ACTIVE_LOW>;
 428         wake-gpio = <&tlmm 40 GPIO_ACTIVE_LOW>;
 429         clkreq-gpio = <&tlmm 39 GPIO_ACTIVE_LOW>;
 430
 431         bridge@0,0 {
 432                 reg = <0x00000000 0 0 0 0>;
 433                 #address-cells = <3>;
 434                 #size-cells = <2>;
 435                 ranges;
 436
 437                 wifi2: wifi@1,0 {
 438                         nvmem-cell-names = "mac-address";
 439                         nvmem-cells = <&macaddr_mac_0>;
 440                         mac-address-increment = <4>;
 441                         compatible = "qcom,ath10k";
 442                         reg = <0x00010000 0 0 0 0>;
 443                         qcom,ath10k-calibration-variant = "zte,mf289f";
 444                 };
 445         };
 446 };