target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-mf282plus.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2 // Copyright (c) 2022, Pawel Dembicki <paweldembicki@gmail.com>.
   3 // Copyright (c) 2023, Andreas Böhler <dev@aboehler.at>
   4
   5 #include "qcom-ipq4019.dtsi"
   6 #include <dt-bindings/soc/qcom,tcsr.h>
   7 #include <dt-bindings/gpio/gpio.h>
   8 #include <dt-bindings/input/input.h>
   9 #include <dt-bindings/leds/common.h>
  10
  11 / {
  12         model = "ZTE MF282Plus";
  13         compatible = "zte,mf282plus";
  14
  15         aliases {
  16                 led-boot = &led_internal;
  17                 led-failsafe = &led_internal;
  18                 led-running = &led_internal;
  19                 led-upgrade = &led_internal;
  20         };
  21
  22         chosen {
  23                 /*
  24                  * bootargs forced by u-boot bootipq command:
  25                  * 'ubi.mtd=rootfs root=mtd:ubi_rootfs rootfstype=squashfs rootwait'
  26                  */
  27                 bootargs-append = " root=/dev/ubiblock0_1";
  28         };
  29
  30         gpio_export {
  31                 compatible = "gpio-export";
  32                 #size-cells = <0>;
  33
  34                 modem {
  35                         gpio-export,name = "modem-reset";
  36                         gpio-export,output = <0>;
  37                         gpios = <&tlmm 8 GPIO_ACTIVE_HIGH>;
  38                 };
  39         };
  40
  41         leds {
  42                 compatible = "gpio-leds";
  43
  44                 led_internal: led-0 {
  45                         function = LED_FUNCTION_STATUS;
  46                         color = <LED_COLOR_ID_BLUE>;
  47                         gpios = <&tlmm 10 GPIO_ACTIVE_LOW>;
  48                         label = "blue:internal_led";
  49                         default-state = "keep";
  50                 };
  51
  52                 led-1 {
  53                         function = LED_FUNCTION_WLAN;
  54                         color = <LED_COLOR_ID_BLUE>;
  55                         gpios = <&tlmm 61 GPIO_ACTIVE_LOW>;
  56                         linux,default-trigger = "phy0tpt";
  57                 };
  58         };
  59
  60         keys {
  61                 compatible = "gpio-keys";
  62
  63                 wifi {
  64                         label = "wifi";
  65                         linux,code = <KEY_RFKILL>;
  66                         gpios = <&tlmm 11 GPIO_ACTIVE_LOW>;
  67                 };
  68
  69                 reset {
  70                         label = "reset";
  71                         linux,code = <KEY_RESTART>;
  72                         gpios = <&tlmm 18 GPIO_ACTIVE_LOW>;
  73                 };
  74
  75                 wps {
  76                         label = "wps";
  77                         linux,code = <KEY_WPS_BUTTON>;
  78                         gpios = <&tlmm 68 GPIO_ACTIVE_LOW>;
  79                 };
  80         };
  81
  82         soc {
  83                 rng@22000 {
  84                         status = "okay";
  85                 };
  86
  87                 mdio@90000 {
  88                         status = "okay";
  89                         pinctrl-0 = <&mdio_pins>;
  90                         pinctrl-names = "default";
  91                         reset-gpios = <&tlmm 47 GPIO_ACTIVE_LOW>;
  92                         reset-delay-us = <2000>;
  93                 };
  94
  95                 tcsr@1949000 {
  96                         compatible = "qcom,tcsr";
  97                         reg = <0x1949000 0x100>;
  98                         qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
  99                 };
 100
 101                 tcsr@194b000 {
 102                         /* select hostmode */
 103                         compatible = "qcom,tcsr";
 104                         reg = <0x194b000 0x100>;
 105                         qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
 106                         status = "okay";
 107                 };
 108
 109                 ess_tcsr@1953000 {
 110                         compatible = "qcom,tcsr";
 111                         reg = <0x1953000 0x1000>;
 112                         qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
 113                 };
 114
 115                 tcsr@1957000 {
 116                         compatible = "qcom,tcsr";
 117                         reg = <0x1957000 0x100>;
 118                         qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
 119                 };
 120
 121                 usb2@60f8800 {
 122                         status = "okay";
 123                 };
 124
 125                 usb3@8af8800 {
 126                         status = "okay";
 127                 };
 128
 129                 crypto@8e3a000 {
 130                         status = "okay";
 131                 };
 132
 133                 watchdog@b017000 {
 134                         status = "okay";
 135                 };
 136         };
 137 };
 138
 139 &blsp_dma {
 140         status = "okay";
 141 };
 142
 143 &blsp1_spi1 {
 144         pinctrl-0 = <&spi_0_pins>;
 145         pinctrl-names = "default";
 146         status = "okay";
 147         cs-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>;
 148
 149         flash@0 {
 150                 /* u-boot is looking for "n25q128a11" property */
 151                 compatible = "jedec,spi-nor", "n25q128a11";
 152                 #address-cells = <1>;
 153                 #size-cells = <1>;
 154                 reg = <0>;
 155                 spi-max-frequency = <24000000>;
 156
 157                 partitions {
 158                         compatible = "fixed-partitions";
 159                         #address-cells = <1>;
 160                         #size-cells = <1>;
 161
 162                         partition@0 {
 163                                 label = "0:SBL1";
 164                                 reg = <0x0 0x40000>;
 165                                 read-only;
 166                         };
 167
 168                         partition@40000 {
 169                                 label = "0:MIBIB";
 170                                 reg = <0x40000 0x20000>;
 171                                 read-only;
 172                         };
 173
 174                         partition@60000 {
 175                                 label = "0:QSEE";
 176                                 reg = <0x60000 0x60000>;
 177                                 read-only;
 178                                 };
 179
 180                         partition@c0000 {
 181                                 label = "0:CDT";
 182                                 reg = <0xc0000 0x10000>;
 183                                 read-only;
 184                         };
 185
 186                         partition@d0000 {
 187                                 label = "0:DDRPARAMS";
 188                                 reg = <0xd0000 0x10000>;
 189                                 read-only;
 190                         };
 191
 192                         partition@e0000 {
 193                                 label = "0:APPSBLENV";
 194                                 reg = <0xe0000 0x10000>;
 195                                 read-only;
 196                         };
 197
 198                         partition@f0000 {
 199                                 label = "0:APPSBL";
 200                                 reg = <0xf0000 0xc0000>;
 201                                 read-only;
 202                         };
 203
 204                         partition@1b0000 {
 205                                 label = "0:reserved1";
 206                                 reg = <0x1b0000 0x50000>;
 207                                 read-only;
 208                         };
 209                 };
 210         };
 211 };
 212
 213 &blsp1_uart1 {
 214         pinctrl-0 = <&serial_pins>;
 215         pinctrl-names = "default";
 216         status = "okay";
 217 };
 218
 219 &cryptobam {
 220         status = "okay";
 221 };
 222
 223 &gmac {
 224         status = "okay";
 225         nvmem-cell-names = "mac-address";
 226         nvmem-cells = <&macaddr_config_0>;
 227 };
 228
 229 &nand {
 230         pinctrl-0 = <&nand_pins>;
 231         pinctrl-names = "default";
 232         status = "okay";
 233
 234         nand@0 {
 235                 partitions {
 236                         compatible = "fixed-partitions";
 237                         #address-cells = <1>;
 238                         #size-cells = <1>;
 239
 240                         partition@0 {
 241                                 label = "fota-flag";
 242                                 reg = <0x0 0xa0000>;
 243                                 read-only;
 244                         };
 245
 246                         partition@a0000 {
 247                                 label = "ART";
 248                                 reg = <0xa0000 0x80000>;
 249                                 read-only;
 250                                 compatible = "nvmem-cells";
 251                                 #address-cells = <1>;
 252                                 #size-cells = <1>;
 253
 254                                 precal_art_1000: precal@1000 {
 255                                         reg = <0x1000 0x2f20>;
 256                                 };
 257
 258                                 precal_art_5000: precal@5000 {
 259                                         reg = <0x5000 0x2f20>;
 260                                 };
 261                         };
 262
 263                         partition@120000 {
 264                                 label = "mac";
 265                                 reg = <0x120000 0x80000>;
 266                                 read-only;
 267                                 compatible = "nvmem-cells";
 268                                 #address-cells = <1>;
 269                                 #size-cells = <1>;
 270
 271                                 macaddr_config_0: macaddr@0 {
 272                                         reg = <0x0 0x6>;
 273                                 };
 274                         };
 275
 276                         partition@1a0000 {
 277                                 label = "reserved2";
 278                                 reg = <0x1a0000 0xc0000>;
 279                                 read-only;
 280                         };
 281
 282                         partition@260000 {
 283                                 label = "cfg-param";
 284                                 reg = <0x260000 0x400000>;
 285                                 read-only;
 286                         };
 287
 288                         partition@660000 {
 289                                 label = "log";
 290                                 reg = <0x660000 0x400000>;
 291                         };
 292
 293                         partition@a60000 {
 294                                 label = "oops";
 295                                 reg = <0xa60000 0xa0000>;
 296                         };
 297
 298                         partition@b00000 {
 299                                 label = "reserved3";
 300                                 reg = <0xb00000 0x500000>;
 301                                 read-only;
 302                         };
 303
 304                         partition@1000000 {
 305                                 label = "web";
 306                                 reg = <0x1000000 0x800000>;
 307                         };
 308
 309                         partition@1800000 {
 310                                 label = "rootfs";
 311                                 reg = <0x1800000 0x1d00000>;
 312                         };
 313
 314                         partition@3500000 {
 315                                 label = "data";
 316                                 reg = <0x3500000 0x1900000>;
 317                         };
 318
 319                         partition@4e00000 {
 320                                 label = "fota";
 321                                 reg = <0x4e00000 0x2800000>;
 322                         };
 323
 324                         partition@7600000 {
 325                                 label = "extra-cfg";
 326                                 reg = <0x7600000 0xa00000>;
 327                         };
 328                 };
 329         };
 330 };
 331
 332 &qpic_bam {
 333         status = "okay";
 334 };
 335
 336 &switch {
 337         status = "okay";
 338 };
 339
 340 &swport4 {
 341         status = "okay";
 342
 343         label = "lan";
 344 };
 345
 346 &tlmm {
 347         i2c_0_pins: i2c_0_pinmux {
 348                 mux {
 349                         pins = "gpio20", "gpio21";
 350                         function = "blsp_i2c0";
 351                         bias-disable;
 352                 };
 353         };
 354
 355         mdio_pins: mdio_pinmux {
 356                 mux_1 {
 357                         pins = "gpio6";
 358                         function = "mdio";
 359                         bias-pull-up;
 360                 };
 361
 362                 mux_2 {
 363                         pins = "gpio7";
 364                         function = "mdc";
 365                         bias-pull-up;
 366                 };
 367         };
 368
 369         nand_pins: nand_pins {
 370                 pullups {
 371                         pins =  "gpio52", "gpio53", "gpio58",
 372                                 "gpio59";
 373                         function = "qpic";
 374                         bias-pull-up;
 375                 };
 376
 377                 pulldowns {
 378                         pins =  "gpio54", "gpio55", "gpio56",
 379                                 "gpio57", "gpio60",
 380                                 "gpio62", "gpio63", "gpio64",
 381                                 "gpio65", "gpio66", "gpio67",
 382                                 "gpio69";
 383                         function = "qpic";
 384                         bias-pull-down;
 385                 };
 386         };
 387
 388         serial_pins: serial_pinmux {
 389                 mux {
 390                         pins = "gpio16", "gpio17";
 391                         function = "blsp_uart0";
 392                         bias-disable;
 393                 };
 394         };
 395
 396         spi_0_pins: spi_0_pinmux {
 397                 pinmux {
 398                         function = "blsp_spi0";
 399                         pins = "gpio13", "gpio14", "gpio15";
 400                         drive-strength = <12>;
 401                         bias-disable;
 402                 };
 403
 404                 pinmux_cs {
 405                         function = "gpio";
 406                         pins = "gpio12";
 407                         drive-strength = <2>;
 408                         bias-disable;
 409                         output-high;
 410                 };
 411         };
 412 };
 413
 414 &usb2_hs_phy {
 415         status = "okay";
 416 };
 417
 418 &usb3_ss_phy {
 419         status = "okay";
 420 };
 421
 422 &usb3_hs_phy {
 423         status = "okay";
 424 };
 425
 426 /*
 427  * The MD5 sum of the board file of the MF286D is identical to the board
 428  * file in the OEM firmware
 429  */
 430 &wifi0 {
 431         status = "okay";
 432         nvmem-cell-names = "pre-calibration", "mac-address";
 433         nvmem-cells = <&precal_art_1000>, <&macaddr_config_0>;
 434         mac-address-increment = <1>;
 435         qcom,ath10k-calibration-variant = "zte,mf286d";
 436 };
 437
 438 /*
 439  * The MD5 sum of the board file of the MF286D is identical to the board
 440  * file in the OEM firmware
 441  */
 442 &wifi1 {
 443         status = "okay";
 444         nvmem-cell-names = "pre-calibration", "mac-address";
 445         nvmem-cells = <&precal_art_5000>, <&macaddr_config_0>;
 446         mac-address-increment = <1>;
 447         qcom,ath10k-calibration-variant = "zte,mf286d";
 448 };