target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-pa1200.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2 /* Copyright (c) 2017-2020, Sven Eckelmann <sven@narfation.org>
   3  * Copyright (c) 2018, Marek Lindner <marek.lindner@kaiwoo.ai>
   4  */
   5
   6 #include "qcom-ipq4019.dtsi"
   7 #include <dt-bindings/gpio/gpio.h>
   8 #include <dt-bindings/input/input.h>
   9 #include <dt-bindings/soc/qcom,tcsr.h>
  10
  11 / {
  12         model = "Plasma Cloud PA1200";
  13         compatible = "plasmacloud,pa1200";
  14
  15         soc {
  16                 rng@22000 {
  17                         status = "okay";
  18                 };
  19
  20                 tcsr@194b000 {
  21                         /* select hostmode */
  22                         compatible = "qcom,tcsr";
  23                         reg = <0x194b000 0x100>;
  24                         qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
  25                         status = "okay";
  26                 };
  27
  28                 tcsr@1949000 {
  29                         compatible = "qcom,tcsr";
  30                         reg = <0x1949000 0x100>;
  31                         qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
  32                 };
  33
  34                 ess_tcsr@1953000 {
  35                         compatible = "qcom,tcsr";
  36                         reg = <0x1953000 0x1000>;
  37                         qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
  38                 };
  39
  40                 tcsr@1957000 {
  41                         compatible = "qcom,tcsr";
  42                         reg = <0x1957000 0x100>;
  43                         qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
  44                 };
  45
  46                 usb2: usb2@60f8800 {
  47                         status = "okay";
  48                 };
  49
  50                 crypto@8e3a000 {
  51                         status = "okay";
  52                 };
  53
  54                 watchdog@b017000 {
  55                         status = "okay";
  56                 };
  57         };
  58
  59         keys {
  60                 compatible = "gpio-keys";
  61
  62                 reset {
  63                         label = "reset";
  64                         gpios = <&tlmm 59 GPIO_ACTIVE_LOW>;
  65                         linux,code = <KEY_RESTART>;
  66                 };
  67         };
  68
  69         aliases {
  70                 led-boot = &led_status_purple;
  71                 led-failsafe = &led_status_yellow;
  72                 led-running = &led_status_cyan;
  73                 led-upgrade = &led_status_yellow;
  74                 label-mac-device = &swport5;
  75         };
  76
  77         leds {
  78                 compatible = "gpio-leds";
  79
  80                 led_status_cyan: status_cyan {
  81                         label = "cyan:status";
  82                         gpios = <&tlmm 0 GPIO_ACTIVE_HIGH>;
  83                 };
  84
  85                 led_status_purple: status_purple {
  86                         label = "purple:status";
  87                         gpios = <&tlmm 1 GPIO_ACTIVE_HIGH>;
  88                 };
  89
  90                 led_status_yellow: status_yellow {
  91                         label = "yellow:status";
  92                         gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>;
  93                 };
  94         };
  95
  96 };
  97
  98 &tlmm {
  99         serial_pins: serial_pinmux {
 100                 mux {
 101                         pins = "gpio60", "gpio61";
 102                         function = "blsp_uart0";
 103                         bias-disable;
 104                 };
 105         };
 106
 107         spi_0_pins: spi_0_pinmux {
 108                 pin {
 109                         function = "blsp_spi0";
 110                         pins = "gpio55", "gpio56", "gpio57";
 111                         drive-strength = <12>;
 112                         bias-disable;
 113                 };
 114                 pin_cs {
 115                         function = "gpio";
 116                         pins = "gpio54";
 117                         drive-strength = <2>;
 118                         bias-disable;
 119                         output-high;
 120                 };
 121         };
 122 };
 123
 124 &blsp_dma {
 125         status = "okay";
 126 };
 127
 128 &blsp1_spi1 {
 129         pinctrl-0 = <&spi_0_pins>;
 130         pinctrl-names = "default";
 131         status = "okay";
 132         cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>;
 133
 134         flash@0 {
 135                 #address-cells = <1>;
 136                 #size-cells = <1>;
 137                 compatible = "jedec,spi-nor";
 138                 reg = <0>;
 139                 spi-max-frequency = <24000000>;
 140
 141                 /* partitions are passed via bootloader */
 142                 partitions {
 143                         partition-art {
 144                                 compatible = "nvmem-cells";
 145                                 #address-cells = <1>;
 146                                 #size-cells = <1>;
 147                                 label = "0:ART";
 148
 149                                 precal_art_1000: precal@1000 {
 150                                         reg = <0x1000 0x2f20>;
 151                                 };
 152
 153                                 precal_art_5000: precal@5000 {
 154                                         reg = <0x5000 0x2f20>;
 155                                 };
 156
 157                                 macaddr_gmac0: macaddr@0 {
 158                                         reg = <0x0 0x6>;
 159                                 };
 160
 161                                 macaddr_gmac1: macaddr@6 {
 162                                         reg = <0x6 0x6>;
 163                                 };
 164                         };
 165                 };
 166         };
 167 };
 168
 169 &blsp1_uart1 {
 170         pinctrl-0 = <&serial_pins>;
 171         pinctrl-names = "default";
 172         status = "okay";
 173 };
 174
 175 &cryptobam {
 176         status = "okay";
 177 };
 178
 179 &usb2_hs_phy {
 180         status = "okay";
 181 };
 182
 183 &mdio {
 184         status = "okay";
 185 };
 186
 187 &gmac {
 188         status = "okay";
 189 };
 190
 191 &switch {
 192         status = "okay";
 193 };
 194
 195 &swport4 {
 196         status = "okay";
 197         label = "ethernet2";
 198
 199         nvmem-cell-names = "mac-address";
 200         nvmem-cells = <&macaddr_gmac1>;
 201 };
 202
 203 &swport5 {
 204         status = "okay";
 205         label = "ethernet1";
 206
 207         nvmem-cell-names = "mac-address";
 208         nvmem-cells = <&macaddr_gmac0>;
 209 };
 210
 211 &wifi0 {
 212         status = "okay";
 213         qcom,ath10k-calibration-variant = "PlasmaCloud-PA1200";
 214
 215         nvmem-cell-names = "pre-calibration";
 216         nvmem-cells = <&precal_art_1000>;
 217 };
 218
 219 &wifi1 {
 220         status = "okay";
 221         qcom,ath10k-calibration-variant = "PlasmaCloud-PA1200";
 222
 223         nvmem-cell-names = "pre-calibration";
 224         nvmem-cells = <&precal_art_5000>;
 225 };