target/linux/ath79/dts/qca9563_tplink_eap225-outdoor-v3.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2
   3 #include "qca9563_tplink_eap2x5-1port.dtsi"
   4
   5 / {
   6         compatible = "tplink,eap225-outdoor-v3", "qca,qca9563";
   7         model = "TP-Link EAP225-Outdoor v3";
   8
   9         aliases {
  10                 led-boot = &led_status_green;
  11                 led-failsafe = &led_status_amber;
  12                 led-running = &led_status_green;
  13                 led-upgrade = &led_status_amber;
  14         };
  15
  16         leds {
  17                 compatible = "gpio-leds";
  18
  19                 led_status_green: status_green {
  20                         label = "green:status";
  21                         gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
  22                         default-state = "on";
  23                 };
  24
  25                 led_status_amber: status_amber {
  26                         label = "amber:status";
  27                         gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
  28                 };
  29         };
  30 };
  31
  32 &art {
  33         nvmem-layout {
  34                 compatible = "fixed-layout";
  35                 #address-cells = <1>;
  36                 #size-cells = <1>;
  37
  38                 macaddr_info_8: macaddr@8 {
  39                         reg = <0x8 0x6>;
  40                 };
  41
  42                 precalibration_ath10k: pre-calibration@5000 {
  43                         reg = <0x5000 0x2f20>;
  44                 };
  45         };
  46 };
  47
  48 &eth0 {
  49         phy-handle = <&phy6>;
  50         phy-mode = "sgmii";
  51 };
  52
  53 &mdio0 {
  54         phy6: ethernet-phy@6 {
  55                 reg = <6>;
  56         };
  57 };
  58
  59 &pcie {
  60         wifi@0,0 {
  61                 compatible = "qcom,ath10k";
  62                 reg = <0 0 0 0 0>;
  63
  64                 mac-address-increment = <1>;
  65
  66                 nvmem-cells = <&macaddr_info_8>, <&precalibration_ath10k>;
  67                 nvmem-cell-names = "mac-address", "pre-calibration";
  68         };
  69 };