target/linux/ath79/dts/qca9558_engenius_eap1750h.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2
   3 #include "qca955x_senao_loader.dtsi"
   4
   5 #include <dt-bindings/gpio/gpio.h>
   6 #include <dt-bindings/input/input.h>
   7
   8 / {
   9         compatible = "engenius,eap1750h", "qca,qca9558";
  10         model = "EnGenius EAP1750H";
  11
  12         aliases {
  13                 label-mac-device = &eth0;
  14                 led-boot = &led_power;
  15                 led-failsafe = &led_power;
  16                 led-running = &led_power;
  17                 led-upgrade = &led_power;
  18         };
  19
  20         keys {
  21                 compatible = "gpio-keys";
  22
  23                 reset {
  24                         label = "reset";
  25                         gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
  26                         debounce-interval = <60>;
  27                         linux,code = <KEY_RESTART>;
  28                 };
  29         };
  30
  31         leds {
  32                 compatible = "gpio-leds";
  33
  34                 led_power: power {
  35                         label = "amber:power";
  36                         gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
  37                         default-state = "on";
  38                 };
  39
  40                 wifi2g {
  41                         label = "blue:wifi2g";
  42                         gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
  43                         linux,default-trigger = "phy1tpt";
  44                 };
  45
  46                 wifi5g {
  47                         label = "green:wifi5g";
  48                         gpios = <&gpio 23 GPIO_ACTIVE_LOW>;
  49                         linux,default-trigger = "phy0tpt";
  50                 };
  51
  52                 wps {
  53                         label = "blue:wps";
  54                         gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
  55                 };
  56         };
  57 };
  58
  59 &partitions {
  60         partition@ff0000 {
  61                 label = "art";
  62                 reg = <0xff0000 0x010000>;
  63                 read-only;
  64
  65                 compatible = "nvmem-cells";
  66                 #address-cells = <1>;
  67                 #size-cells = <1>;
  68
  69                 macaddr_art_0: macaddr@0 {
  70                         reg = <0x0 0x6>;
  71                 };
  72
  73                 calibration_art_1000: calibration@1000 {
  74                         reg = <0x1000 0x440>;
  75                 };
  76
  77                 calibration_art_5000: calibration@5000 {
  78                         reg = <0x5000 0x844>;
  79                 };
  80         };
  81 };
  82
  83 &mdio0 {
  84         status = "okay";
  85
  86         phy5: ethernet-phy@5 {
  87                 reg = <5>;
  88                 eee-broken-100tx;
  89                 eee-broken-1000t;
  90         };
  91 };
  92
  93 &eth0 {
  94         status = "okay";
  95
  96         nvmem-cells = <&macaddr_art_0>;
  97         nvmem-cell-names = "mac-address";
  98
  99         phy-handle = <&phy5>;
 100         phy-mode = "rgmii-id";
 101
 102         pll-data = <0x82000000 0x80000101 0x80001313>;
 103 };
 104
 105 &wmac {
 106         status = "okay";
 107
 108         nvmem-cells = <&macaddr_art_0>, <&calibration_art_1000>;
 109         nvmem-cell-names = "mac-address", "calibration";
 110         mac-address-increment = <1>;
 111 };
 112
 113 &ath10k_0 {
 114         status = "okay";
 115
 116         nvmem-cells = <&macaddr_art_0>, <&calibration_art_5000>;
 117         nvmem-cell-names = "mac-address", "calibration";
 118         mac-address-increment = <2>;
 119 };
 120
 121 &pcie0 {
 122         status = "okay";
 123 };