target/linux/ath79/dts/qca9558_dlink_dir-629-a1.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2
   3 #include "qca955x.dtsi"
   4
   5 #include <dt-bindings/gpio/gpio.h>
   6 #include <dt-bindings/input/input.h>
   7 #include <dt-bindings/leds/common.h>
   8
   9 / {
  10         compatible = "dlink,dir-629-a1", "qca,qca9558";
  11         model = "D-Link DIR-629 A1";
  12
  13         aliases {
  14                 label-mac-device = &eth0;
  15                 led-boot = &led_power;
  16                 led-failsafe = &led_power;
  17                 led-running = &led_power;
  18                 led-upgrade = &led_power;
  19                 serial0 = &uart;
  20         };
  21
  22         keys {
  23                 compatible = "gpio-keys";
  24
  25                 reset {
  26                         label = "reset";
  27                         linux,code = <KEY_RESTART>;
  28                         gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
  29                 };
  30
  31                 wps {
  32                         label = "wps";
  33                         linux,code = <KEY_WPS_BUTTON>;
  34                         gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
  35                 };
  36         };
  37
  38         leds {
  39                 compatible = "gpio-leds";
  40
  41                 led-0 {
  42                         color = <LED_COLOR_ID_GREEN>;
  43                         function = LED_FUNCTION_WLAN;
  44                         gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
  45                         linux,default-trigger = "phy0tpt";
  46                 };
  47
  48                 led_power: led-1 {
  49                         label = "green:power";
  50                         color = <LED_COLOR_ID_GREEN>;
  51                         function = LED_FUNCTION_POWER;
  52                         gpios = <&gpio 21 GPIO_ACTIVE_LOW>;
  53                 };
  54
  55                 led-2 {
  56                         color = <LED_COLOR_ID_GREEN>;
  57                         function = LED_FUNCTION_WPS;
  58                         gpios = <&gpio 23 GPIO_ACTIVE_LOW>;
  59                 };
  60         };
  61 };
  62
  63 &eth0 {
  64         status = "okay";
  65
  66         phy-mode = "mii";
  67
  68         nvmem-cells = <&macaddr_mfcdata_35>;
  69         nvmem-cell-names = "mac-address-ascii";
  70
  71         fixed-link {
  72                 speed = <100>;
  73                 full-duplex;
  74         };
  75 };
  76
  77 &mdio0 {
  78         status = "okay";
  79
  80         switch0@1f {
  81                 compatible = "qca,ar8236";
  82                 reg = <0x1f>;
  83         };
  84 };
  85
  86 &spi {
  87         status = "okay";
  88
  89         flash@0 {
  90                 compatible = "jedec,spi-nor";
  91                 reg = <0>;
  92                 spi-max-frequency = <30000000>;
  93                 m25p,fast-read;
  94
  95                 partitions {
  96                         compatible = "fixed-partitions";
  97                         #address-cells = <1>;
  98                         #size-cells = <1>;
  99
 100                         partition@0 {
 101                                 label = "u-boot";
 102                                 reg = <0x000000 0x040000>;
 103                                 read-only;
 104                         };
 105
 106                         partition@40000 {
 107                                 label = "u-boot-env";
 108                                 reg = <0x040000 0x008000>;
 109                                 read-only;
 110                         };
 111
 112                         partition@48000 {
 113                                 label = "mfcdata";
 114                                 reg = <0x048000 0x008000>;
 115                                 read-only;
 116
 117                                 compatible = "nvmem-cells";
 118                                 #address-cells = <1>;
 119                                 #size-cells = <1>;
 120
 121                                 macaddr_mfcdata_35: macaddr@35 {
 122                                         reg = <0x35 0x11>;
 123                                 };
 124
 125                                 macaddr_mfcdata_51: macaddr@51 {
 126                                         reg = <0x51 0x11>;
 127                                 };
 128                         };
 129
 130                         partition@50000 {
 131                                 label = "devconf";
 132                                 reg = <0x050000 0x010000>;
 133                                 read-only;
 134                         };
 135
 136                         partition@60000 {
 137                                 label = "langpack";
 138                                 reg = <0x060000 0x020000>;
 139                                 read-only;
 140                         };
 141
 142                         partition@80000 {
 143                                 label = "art";
 144                                 reg = <0x080000 0x010000>;
 145                                 read-only;
 146
 147                                 compatible = "nvmem-cells";
 148                                 #address-cells = <1>;
 149                                 #size-cells = <1>;
 150
 151                                 cal_art_1000: calibration@1000 {
 152                                         reg = <0x1000 0x440>;
 153                                 };
 154                         };
 155
 156                         partition@90000 {
 157                                 compatible = "seama";
 158                                 label = "firmware";
 159                                 reg = <0x090000 0x770000>;
 160                         };
 161                 };
 162         };
 163 };
 164
 165 &wmac {
 166         status = "okay";
 167
 168         nvmem-cells = <&cal_art_1000>, <&macaddr_mfcdata_51>;
 169         nvmem-cell-names = "calibration", "mac-address-ascii";
 170 };