target/linux/ath79/dts/qca9557_engenius_eap1200h.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2
   3 #include "qca955x_senao_loader.dtsi"
   4
   5 #include <dt-bindings/gpio/gpio.h>
   6 #include <dt-bindings/input/input.h>
   7
   8 / {
   9         compatible = "engenius,eap1200h", "qca,qca9557";
  10         model = "EnGenius EAP1200H";
  11
  12         aliases {
  13                 label-mac-device = &eth0;
  14                 led-boot = &led_power;
  15                 led-failsafe = &led_power;
  16                 led-running = &led_power;
  17                 led-upgrade = &led_power;
  18         };
  19
  20         keys {
  21                 compatible = "gpio-keys";
  22
  23                 reset {
  24                         label = "reset";
  25                         gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
  26                         debounce-interval = <60>;
  27                         linux,code = <KEY_RESTART>;
  28                 };
  29         };
  30
  31         leds {
  32                 compatible = "gpio-leds";
  33
  34                 led_power: power {
  35                         label = "amber:power";
  36                         gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
  37                         default-state = "on";
  38                 };
  39
  40                 wifi2g {
  41                         label = "blue:wifi2g";
  42                         gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
  43                         linux,default-trigger = "phy1tpt";
  44                 };
  45
  46                 wifi5g {
  47                         label = "green:wifi5g";
  48                         gpios = <&gpio 23 GPIO_ACTIVE_LOW>;
  49                         linux,default-trigger = "phy0tpt";
  50                 };
  51
  52                 wps {
  53                         label = "blue:wps";
  54                         gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
  55                 };
  56         };
  57 };
  58
  59 &partitions {
  60         partition@ff0000 {
  61                 label = "art";
  62                 reg = <0xff0000 0x010000>;
  63                 read-only;
  64
  65                 nvmem-layout {
  66                         compatible = "fixed-layout";
  67                         #address-cells = <1>;
  68                         #size-cells = <1>;
  69
  70                         macaddr_art_0: macaddr@0 {
  71                                 compatible = "mac-base";
  72                                 reg = <0x0 0x6>;
  73                                 #nvmem-cell-cells = <1>;
  74                         };
  75
  76                         calibration_art_1000: calibration@1000 {
  77                                 reg = <0x1000 0x440>;
  78                         };
  79
  80                         calibration_art_5000: calibration@5000 {
  81                                 reg = <0x5000 0x844>;
  82                         };
  83                 };
  84         };
  85 };
  86
  87 &mdio0 {
  88         status = "okay";
  89
  90         phy5: ethernet-phy@5 {
  91                 reg = <5>;
  92                 eee-broken-100tx;
  93                 eee-broken-1000t;
  94         };
  95 };
  96
  97 &eth0 {
  98         status = "okay";
  99
 100         nvmem-cells = <&macaddr_art_0 0>;
 101         nvmem-cell-names = "mac-address";
 102
 103         phy-handle = <&phy5>;
 104         phy-mode = "rgmii-id";
 105
 106         pll-data = <0x82000000 0x80000101 0x80001313>;
 107 };
 108
 109 &wmac {
 110         status = "okay";
 111
 112         nvmem-cells = <&macaddr_art_0 1>, <&calibration_art_1000>;
 113         nvmem-cell-names = "mac-address", "calibration";
 114 };
 115
 116 &ath10k_0 {
 117         status = "okay";
 118
 119         nvmem-cells = <&macaddr_art_0 2>, <&calibration_art_5000>;
 120         nvmem-cell-names = "mac-address", "calibration";
 121 };
 122
 123 &pcie0 {
 124         status = "okay";
 125 };