target/linux/ath79/dts/qca9531_joyit_jt-or750i.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2
   3 #include "qca953x.dtsi"
   4
   5 #include <dt-bindings/gpio/gpio.h>
   6 #include <dt-bindings/input/input.h>
   7
   8 / {
   9         compatible = "joyit,jt-or750i", "qca,qca9531";
  10         model = "Joy-IT JT-OR750i";
  11
  12         aliases {
  13                 led-boot = &led_status_green;
  14                 led-failsafe = &led_status_red;
  15                 led-running = &led_status_green;
  16                 led-upgrade = &led_status_red;
  17                 label-mac-device = &eth0;
  18         };
  19
  20         keys {
  21                 compatible = "gpio-keys";
  22
  23                 reset {
  24                         label = "reset";
  25                         linux,code = <KEY_RESTART>;
  26                         gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
  27                 };
  28         };
  29
  30         leds {
  31                 compatible = "gpio-leds";
  32
  33                 pinctrl-names = "default";
  34                 pinctrl-0 = <&jtag_disable_pins &pinmux_led_eth_pins>;
  35
  36                 led_status_green: status_green {
  37                         label = "green:status";
  38                         gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
  39                         default-state = "on";
  40                 };
  41
  42                 led_status_red: status_red {
  43                         label = "red:status";
  44                         gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
  45                 };
  46         };
  47 };
  48
  49 &pinmux {
  50         pinmux_led_eth_pins: pinmux_led_eth_pins {
  51                 pinctrl-single,bits = \
  52                         /* GPIO 4: LED_LINK_5 (WAN) */     \
  53                         <0x04 0x0000002d 0x000000ff>,      \
  54                         /* GPIO 14: LED_LINK_2 (LAN 3) */  \
  55                         /* GPIO 15: LED_LINK_3 (LAN 2) */  \
  56                         <0x0c 0x2b2a0000 0xffff0000>,      \
  57                         /* GPIO 16: LED_LINK_4 (LAN 1) */  \
  58                         <0x10 0x0000002c 0x000000ff>;
  59         };
  60 };
  61
  62 &spi {
  63         status = "okay";
  64
  65         flash@0 {
  66                 compatible = "jedec,spi-nor";
  67                 reg = <0>;
  68                 spi-max-frequency = <50000000>;
  69
  70                 partitions {
  71                         compatible = "fixed-partitions";
  72                         #address-cells = <1>;
  73                         #size-cells = <1>;
  74
  75                         partition@0 {
  76                                 label = "u-boot";
  77                                 reg = <0x0 0x40000>;
  78                                 read-only;
  79                         };
  80
  81                         partition@40000 {
  82                                 label = "u-boot-env";
  83                                 reg = <0x40000 0x10000>;
  84                                 read-only;
  85                         };
  86
  87                         partition@50000 {
  88                                 label = "firmware";
  89                                 reg = <0x50000 0xfa0000>;
  90                                 compatible = "denx,uimage";
  91                         };
  92
  93                         art: partition@ff0000 {
  94                                 label = "art";
  95                                 reg = <0xff0000 0x10000>;
  96                                 read-only;
  97                         };
  98                 };
  99         };
 100 };
 101
 102 &eth0 {
 103         status = "okay";
 104
 105         phy-handle = <&swphy4>;
 106
 107         nvmem-cells = <&macaddr_art_0>;
 108         nvmem-cell-names = "mac-address";
 109 };
 110
 111 &eth1 {
 112         nvmem-cells = <&macaddr_art_6>;
 113         nvmem-cell-names = "mac-address";
 114 };
 115
 116 &pcie0 {
 117         status = "okay";
 118 };
 119
 120 &wmac {
 121         status = "okay";
 122
 123         mtd-cal-data = <&art 0x1000>;
 124 };
 125
 126 &art {
 127         compatible = "nvmem-cells";
 128         #address-cells = <1>;
 129         #size-cells = <1>;
 130
 131         macaddr_art_0: macaddr@0 {
 132                 reg = <0x0 0x6>;
 133         };
 134
 135         macaddr_art_6: macaddr@6 {
 136                 reg = <0x6 0x6>;
 137         };
 138 };