target/linux/ath79/dts/qca9531_comfast_cf-e5.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2
   3 #include "qca953x.dtsi"
   4
   5 #include <dt-bindings/gpio/gpio.h>
   6 #include <dt-bindings/input/input.h>
   7
   8 / {
   9         compatible = "comfast,cf-e5", "qca,qca9531";
  10         model = "COMFAST CF-E5/E7";
  11
  12         aliases {
  13                 label-mac-device = &eth0;
  14         };
  15
  16         keys {
  17                 compatible = "gpio-keys";
  18
  19                 reset {
  20                         label = "reset";
  21                         linux,code = <KEY_RESTART>;
  22                         gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
  23                 };
  24         };
  25
  26         leds {
  27                 compatible = "gpio-leds";
  28                 pinctrl-names = "default";
  29                 pinctrl-0 = <&jtag_disable_pins &led_wan_pin>;
  30
  31                 wan {
  32                         label = "blue:wan";
  33                         gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
  34                 };
  35
  36                 lan {
  37                         label = "blue:lan";
  38                         gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
  39                 };
  40
  41                 wlan {
  42                         label = "blue:wlan";
  43                         gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
  44                         linux,default-trigger = "phy0tpt";
  45                 };
  46
  47                 rssi0 {
  48                         label = "blue:rssi0";
  49                         gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
  50                 };
  51
  52                 rssi1 {
  53                         label = "blue:rssi1";
  54                         gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
  55                 };
  56
  57                 rssi2 {
  58                         label = "blue:rssi2";
  59                         gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
  60                 };
  61         };
  62 };
  63
  64 &usb0 {
  65         status = "okay";
  66 };
  67
  68 &usb_phy {
  69         status = "okay";
  70 };
  71
  72 &spi {
  73         status = "okay";
  74
  75         flash@0 {
  76                 compatible = "jedec,spi-nor";
  77                 reg = <0>;
  78                 spi-max-frequency = <25000000>;
  79
  80                 partitions {
  81                         compatible = "fixed-partitions";
  82                         #address-cells = <1>;
  83                         #size-cells = <1>;
  84
  85                         partition@0 {
  86                                 label = "u-boot";
  87                                 reg = <0x000000 0x010000>;
  88                                 read-only;
  89                         };
  90
  91                         art: partition@10000 {
  92                                 label = "art";
  93                                 reg = <0x010000 0x010000>;
  94                                 read-only;
  95                         };
  96
  97                         partition@20000 {
  98                                 compatible = "denx,uimage";
  99                                 label = "firmware";
 100                                 reg = <0x020000 0xfd0000>;
 101                         };
 102
 103                         partition@ff0000 {
 104                                 label = "art-backup";
 105                                 reg = <0xff0000 0x010000>;
 106                                 read-only;
 107                         };
 108                 };
 109         };
 110 };
 111
 112 &eth0 {
 113         status = "okay";
 114
 115         phy-handle = <&swphy4>;
 116
 117         nvmem-cells = <&macaddr_art_0>;
 118         nvmem-cell-names = "mac-address";
 119 };
 120
 121 &eth1 {
 122         nvmem-cells = <&macaddr_art_6>;
 123         nvmem-cell-names = "mac-address";
 124 };
 125
 126 &wmac {
 127         status = "okay";
 128
 129         mtd-cal-data = <&art 0x1000>;
 130 };
 131
 132 &pinmux {
 133         led_wan_pin: pinmux_led_wan_pin {
 134                 pinctrl-single,bits = <0x4 0x0 0xff>;
 135         };
 136 };
 137
 138 &art {
 139         compatible = "nvmem-cells";
 140         #address-cells = <1>;
 141         #size-cells = <1>;
 142
 143         macaddr_art_0: macaddr@0 {
 144                 reg = <0x0 0x6>;
 145         };
 146
 147         macaddr_art_6: macaddr@6 {
 148                 reg = <0x6 0x6>;
 149         };
 150 };