target/linux/ramips/dts/DIR-860L-B1.dts

   1 /dts-v1/;
   2
   3 #include "mt7621.dtsi"
   4
   5 / {
   6         compatible = "ralink,mt7621-eval-board", "ralink,mt7621-soc";
   7         model = "D-Link DIR-860L B1";
   8
   9         memory@0 {
  10                 device_type = "memory";
  11                 reg = <0x0 0x8000000>;
  12         };
  13
  14         chosen {
  15                 bootargs = "console=ttyS0,57600";
  16         };
  17
  18         gpio-leds {
  19                 compatible = "gpio-leds";
  20
  21                 power {
  22                         label = "dir-860l-b1:orange:power";
  23                         gpios = <&gpio0 13 1>;
  24                 };
  25
  26                 power2 {
  27                         label = "dir-860l-b1:green:power";
  28                         gpios = <&gpio0 15 1>;
  29                 };
  30
  31                 net {
  32                         label = "dir-860l-b1:orange:net";
  33                         gpios = <&gpio0 14 1>;
  34                 };
  35
  36                 net2 {
  37                         label = "dir-860l-b1:green:net";
  38                         gpios = <&gpio0 16 1>;
  39                 };
  40         };
  41
  42         gpio-keys-polled {
  43                 compatible = "gpio-keys-polled";
  44                 #address-cells = <1>;
  45                 #size-cells = <0>;
  46                 poll-interval = <20>;
  47
  48                 reset {
  49                         label = "reset";
  50                         gpios = <&gpio0 7 1>;
  51                         linux,code = <0x198>;
  52                 };
  53
  54                 wps {
  55                         label = "wps";
  56                         gpios = <&gpio0 18 1>;
  57                         linux,code = <0x211>;
  58                 };
  59         };
  60 };
  61
  62 &spi0 {
  63         status = "okay";
  64
  65         m25p80@0 {
  66                 #address-cells = <1>;
  67                 #size-cells = <1>;
  68                 compatible = "jedec,spi-nor";
  69                 reg = <0>;
  70                 linux,modalias = "m25p80";
  71                 spi-max-frequency = <10000000>;
  72
  73                 partition@0 {
  74                         label = "u-boot";
  75                         reg = <0x0 0x30000>;
  76                         read-only;
  77                 };
  78
  79                 partition@30000 {
  80                         label = "u-boot-env";
  81                         reg = <0x30000 0x4000>;
  82                         read-only;
  83                 };
  84
  85                 radio: partition@34000 {
  86                         label = "radio";
  87                         reg = <0x34000 0x4000>;
  88                         read-only;
  89                 };
  90
  91                 factory: partition@38000 {
  92                         label = "factory";
  93                         reg = <0x38000 0x8000>;
  94                         read-only;
  95                 };
  96
  97                 partition@40000 {
  98                         label = "defaults";
  99                         reg = <0x40000 0x10000>;
 100                         read-only;
 101                 };
 102
 103                 partition@50000 {
 104                         label = "firmware";
 105                         reg = <0x50000 0xfb0000>;
 106                 };
 107         };
 108 };
 109
 110 &pcie {
 111         status = "okay";
 112
 113         pcie0 {
 114                 mt76@0,0 {
 115                         reg = <0x0000 0 0 0 0>;
 116                         device_type = "pci";
 117                         mediatek,mtd-eeprom = <&radio 0x2000>;
 118                         mediatek,2ghz = <0>;
 119                 };
 120         };
 121
 122         pcie1 {
 123                 mt76@1,0 {
 124                         reg = <0x0000 0 0 0 0>;
 125                         device_type = "pci";
 126                         mediatek,mtd-eeprom = <&radio 0>;
 127                         mediatek,5ghz = <0>;
 128                 };
 129         };
 130 };
 131
 132 &pinctrl {
 133         state_default: pinctrl0 {
 134                 gpio {
 135                         ralink,group = "i2c", "uart2", "uart3", "rgmii2", "sdhci";
 136                         ralink,function = "gpio";
 137                 };
 138         };
 139 };