1 #include <dt-bindings/gpio/gpio.h>
6 compatible = "lantiq,xway", "lantiq,danube";
13 stdout-path = "serial0:115200n8";
18 compatible = "mips,mips24Kc";
25 compatible = "lantiq,biu", "simple-bus";
26 reg = <0x1f800000 0x800000>;
27 ranges = <0x0 0x1f800000 0x7fffff>;
30 #interrupt-cells = <1>;
32 compatible = "lantiq,icu";
41 compatible = "lantiq,wdt";
49 compatible = "lantiq,sram", "simple-bus";
50 reg = <0x1f000000 0x800000>;
51 ranges = <0x0 0x1f000000 0x7fffff>;
54 #interrupt-cells = <1>;
56 compatible = "lantiq,eiu-xway";
57 reg = <0x101000 0x1000>;
58 interrupt-parent = <&icu0>;
59 lantiq,eiu-irqs = <166 135 66>;
63 compatible = "lantiq,pmu-xway";
64 reg = <0x102000 0x1000>;
68 compatible = "lantiq,cgu-xway";
69 reg = <0x103000 0x1000>;
75 compatible = "lantiq,vmmc-xway";
76 reg = <0x103000 0x400>;
77 interrupt-parent = <&icu0>;
78 interrupts = <150 151 152 153 154 155>;
82 compatible = "lantiq,danube-rcu", "simple-mfd", "syscon";
83 reg = <0x203000 0x1000>;
84 ranges = <0x0 0x203000 0x100>;
87 reset: reset-controller@10 {
88 compatible = "lantiq,danube-reset";
89 reg = <0x10 4>, <0x14 4>;
94 usb_phy: usb2-phy@18 {
95 compatible = "lantiq,danube-usb2-phy";
99 resets = <&reset 4 4>;
100 reset-names = "ctrl";
105 compatible = "syscon-reboot";
116 #address-cells = <1>;
118 compatible = "lantiq,fpi", "simple-bus";
119 ranges = <0x0 0x10000000 0xeefffff>;
120 reg = <0x10000000 0xef00000>;
122 localbus: localbus@0 {
123 #address-cells = <2>;
125 ranges = <0 0 0x0 0x3ffffff /* addrsel0 */
126 1 0 0x4000000 0x4000010>; /* addsel1 */
127 compatible = "lantiq,localbus", "simple-bus";
130 compatible = "lantiq,gpio-mm";
132 #address-cells = <1>;
141 compatible = "lantiq,gptu-xway";
142 reg = <0xe100a00 0x100>;
143 interrupt-parent = <&icu0>;
144 interrupts = <126 127 128 129 130 131>;
149 compatible = "lantiq,gpio-stp-xway";
151 reg = <0xe100bb0 0x40>;
152 lantiq,shadow = <0xfff>;
153 lantiq,groups = <0x3>;
157 asc0: serial@e100400 {
158 compatible = "lantiq,asc";
159 reg = <0xe100400 0x400>;
160 interrupt-parent = <&icu0>;
161 interrupts = <104 105 106>;
165 gpio: pinmux@e100b10 {
166 compatible = "lantiq,danube-pinctrl";
169 reg = <0xe100b10 0xa0>;
172 asc1: serial@e100c00 {
173 compatible = "lantiq,asc";
174 reg = <0xe100c00 0x400>;
175 interrupt-parent = <&icu0>;
176 interrupts = <112 113 114>;
180 compatible = "lantiq,danube-usb";
181 reg = <0xe101000 0x1000
183 interrupt-parent = <&icu0>;
187 phy-names = "usb2-phy";
192 compatible = "lantiq,deu-danube";
193 reg = <0xe103100 0xf00>;
197 compatible = "lantiq,dma-xway";
198 reg = <0xe104100 0x800>;
202 compatible = "lantiq,ebu-xway";
203 reg = <0xe105300 0x100>;
207 compatible = "lantiq,mei-xway";
208 interrupt-parent = <&icu0>;
213 compatible = "lantiq,etop-xway";
214 reg = <0xe180000 0x40000>;
215 interrupt-parent = <&icu0>;
216 interrupts = <73 78>;
217 mac-address = [ 00 11 22 33 44 55 ];
221 compatible = "lantiq,ppe-danube";
222 interrupt-parent = <&icu0>;
229 #address-cells = <3>;
231 #interrupt-cells = <1>;
232 compatible = "lantiq,pci-xway";
233 bus-range = <0x0 0x0>;
234 ranges = <0x2000000 0 0x8000000 0x8000000 0 0x2000000 /* pci memory */
235 0x1000000 0 0x00000000 0xae00000 0 0x200000>; /* io space */
236 reg = <0x7000000 0x8000 /* config space */
237 0xe105400 0x400>; /* pci bridge */
238 lantiq,bus-clock = <33333333>;
239 interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
240 interrupt-map = <0x7000 0 0 1 &icu0 30 1>; /* slot 14, irq 30 */
241 req-mask = <0x1>; /* GNT1 */
246 compatible = "lantiq,adsl-danube";