package/boot/uboot-mediatek/patches/431-add-xiaomi_redmi-ax6000.patch

   1 --- /dev/null
   2 +++ b/configs/mt7986_xiaomi_redmi-ax6000_defconfig
   3 @@ -0,0 +1,180 @@
   4 +CONFIG_ARM=y
   5 +CONFIG_POSITION_INDEPENDENT=y
   6 +CONFIG_ARCH_MEDIATEK=y
   7 +CONFIG_TARGET_MT7986=y
   8 +CONFIG_SYS_TEXT_BASE=0x41e00000
   9 +CONFIG_SYS_MALLOC_F_LEN=0x4000
  10 +CONFIG_SYS_HAS_NONCACHED_MEMORY=y
  11 +CONFIG_NR_DRAM_BANKS=1
  12 +CONFIG_DEFAULT_DEVICE_TREE="mt7986a-xiaomi_redmi-ax6000"
  13 +CONFIG_DEFAULT_ENV_FILE="xiaomi_redmi-ax6000_env"
  14 +CONFIG_DEFAULT_FDT_FILE="mediatek/mt7986a-xiaomi_redmi-ax6000.dtb"
  15 +CONFIG_OF_LIBFDT_OVERLAY=y
  16 +CONFIG_DEBUG_UART_BASE=0x11002000
  17 +CONFIG_DEBUG_UART_CLOCK=40000000
  18 +CONFIG_DEBUG_UART=y
  19 +CONFIG_SYS_LOAD_ADDR=0x46000000
  20 +CONFIG_SMBIOS_PRODUCT_NAME=""
  21 +CONFIG_AUTOBOOT_KEYED=y
  22 +CONFIG_BOOTDELAY=30
  23 +CONFIG_AUTOBOOT_MENU_SHOW=y
  24 +CONFIG_CFB_CONSOLE_ANSI=y
  25 +CONFIG_BOARD_LATE_INIT=y
  26 +CONFIG_BUTTON=y
  27 +CONFIG_BUTTON_GPIO=y
  28 +CONFIG_GPIO_HOG=y
  29 +CONFIG_CMD_ENV_FLAGS=y
  30 +CONFIG_FIT=y
  31 +CONFIG_FIT_ENABLE_SHA256_SUPPORT=y
  32 +# CONFIG_LED is not set
  33 +# CONFIG_LED_BLINK is not set
  34 +# CONFIG_LED_GPIO is not set
  35 +CONFIG_LOGLEVEL=7
  36 +CONFIG_LOG=y
  37 +CONFIG_SYS_PROMPT="MT7986> "
  38 +CONFIG_CMD_BOOTMENU=y
  39 +CONFIG_CMD_BOOTP=y
  40 +CONFIG_CMD_BUTTON=y
  41 +CONFIG_CMD_CACHE=y
  42 +CONFIG_CMD_CDP=y
  43 +CONFIG_CMD_CPU=y
  44 +CONFIG_CMD_DHCP=y
  45 +CONFIG_CMD_DM=y
  46 +CONFIG_CMD_DNS=y
  47 +CONFIG_CMD_ECHO=y
  48 +CONFIG_CMD_ENV_READMEM=y
  49 +CONFIG_CMD_ERASEENV=y
  50 +# CONFIG_CMD_EXT4 is not set
  51 +# CONFIG_CMD_FAT is not set
  52 +CONFIG_CMD_FDT=y
  53 +# CONFIG_CMD_FS_GENERIC is not set
  54 +# CONFIG_CMD_FS_UUID is not set
  55 +CONFIG_CMD_GPIO=y
  56 +# CONFIG_CMD_GPT is not set
  57 +CONFIG_CMD_HASH=y
  58 +CONFIG_CMD_ITEST=y
  59 +# CONFIG_CMD_LED is not set
  60 +CONFIG_CMD_LICENSE=y
  61 +CONFIG_CMD_LINK_LOCAL=y
  62 +# CONFIG_CMD_MBR is not set
  63 +CONFIG_CMD_MTD=y
  64 +# CONFIG_CMD_PCI is not set
  65 +CONFIG_CMD_PSTORE=y
  66 +CONFIG_CMD_PSTORE_MEM_ADDR=0x42ff0000
  67 +CONFIG_CMD_SF_TEST=y
  68 +CONFIG_CMD_PING=y
  69 +CONFIG_CMD_PXE=y
  70 +# CONFIG_CMD_PWM is not set
  71 +CONFIG_CMD_SMC=y
  72 +CONFIG_CMD_TFTPBOOT=y
  73 +CONFIG_CMD_TFTPSRV=y
  74 +CONFIG_CMD_UBI=y
  75 +CONFIG_CMD_UBI_RENAME=y
  76 +CONFIG_CMD_UBIFS=y
  77 +CONFIG_CMD_ASKENV=y
  78 +CONFIG_CMD_PART=y
  79 +CONFIG_CMD_RARP=y
  80 +CONFIG_CMD_SETEXPR=y
  81 +CONFIG_CMD_SLEEP=y
  82 +CONFIG_CMD_SNTP=y
  83 +CONFIG_CMD_SOURCE=y
  84 +CONFIG_CMD_STRINGS=y
  85 +# CONFIG_CMD_USB is not set
  86 +# CONFIG_CMD_FLASH is not set
  87 +CONFIG_CMD_UUID=y
  88 +CONFIG_DISPLAY_CPUINFO=y
  89 +CONFIG_DM_MTD=y
  90 +CONFIG_DM_REGULATOR=y
  91 +CONFIG_DM_REGULATOR_FIXED=y
  92 +CONFIG_DM_REGULATOR_GPIO=y
  93 +# CONFIG_DM_USB is not set
  94 +# CONFIG_DM_PWM is not set
  95 +# CONFIG_PWM_MTK is not set
  96 +CONFIG_HUSH_PARSER=y
  97 +CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
  98 +CONFIG_SYS_RELOC_GD_ENV_ADDR=y
  99 +CONFIG_VERSION_VARIABLE=y
 100 +CONFIG_PARTITION_UUIDS=y
 101 +CONFIG_NETCONSOLE=y
 102 +CONFIG_REGMAP=y
 103 +CONFIG_SYSCON=y
 104 +CONFIG_CLK=y
 105 +CONFIG_DM_GPIO=y
 106 +# CONFIG_DM_SCSI is not set
 107 +# CONFIG_AHCI is not set
 108 +CONFIG_PHY=y
 109 +# CONFIG_PHY_MTK_TPHY is not set
 110 +CONFIG_PHY_FIXED=y
 111 +CONFIG_DM_ETH=y
 112 +CONFIG_MEDIATEK_ETH=y
 113 +# CONFIG_PCI is not set
 114 +# CONFIG_MMC is not set
 115 +# CONFIG_DM_MMC is not set
 116 +CONFIG_MTD=y
 117 +CONFIG_MTD_UBI_FASTMAP=y
 118 +# CONFIG_DM_PCI is not set
 119 +# CONFIG_PCIE_MEDIATEK is not set
 120 +CONFIG_PINCTRL=y
 121 +CONFIG_PINCONF=y
 122 +# CONFIG_PINCTRL_MT7622 is not set
 123 +CONFIG_POWER_DOMAIN=y
 124 +CONFIG_PRE_CONSOLE_BUFFER=y
 125 +CONFIG_PRE_CON_BUF_ADDR=0x4007EF00
 126 +CONFIG_MTK_POWER_DOMAIN=y
 127 +CONFIG_RAM=y
 128 +CONFIG_DM_SERIAL=y
 129 +CONFIG_MTK_SERIAL=y
 130 +CONFIG_SPI=y
 131 +# CONFIG_I2C is not set
 132 +CONFIG_DM_SPI=y
 133 +CONFIG_MTK_SPI_NAND=y
 134 +CONFIG_MTK_SPI_NAND_MTD=y
 135 +CONFIG_SYSRESET_WATCHDOG=y
 136 +CONFIG_WDT_MTK=y
 137 +CONFIG_LZO=y
 138 +CONFIG_ZSTD=y
 139 +CONFIG_HEXDUMP=y
 140 +CONFIG_RANDOM_UUID=y
 141 +CONFIG_REGEX=y
 142 +# CONFIG_USB is not set
 143 +# CONFIG_USB_HOST is not set
 144 +# CONFIG_USB_XHCI_HCD is not set
 145 +# CONFIG_USB_XHCI_MTK is not set
 146 +# CONFIG_USB_STORAGE is not set
 147 +CONFIG_OF_EMBED=y
 148 +CONFIG_ENV_OVERWRITE=y
 149 +CONFIG_ENV_IS_IN_UBI=y
 150 +CONFIG_ENV_UBI_PART="ubi"
 151 +CONFIG_ENV_SIZE=0x1f000
 152 +CONFIG_ENV_SIZE_REDUND=0x1f000
 153 +CONFIG_ENV_UBI_VOLUME="ubootenv"
 154 +CONFIG_ENV_UBI_VOLUME_REDUND="ubootenv2"
 155 +CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
 156 +CONFIG_NET_RANDOM_ETHADDR=y
 157 +CONFIG_REGMAP=y
 158 +CONFIG_SYSCON=y
 159 +CONFIG_CLK=y
 160 +CONFIG_PHY_FIXED=y
 161 +CONFIG_DM_ETH=y
 162 +CONFIG_MEDIATEK_ETH=y
 163 +CONFIG_PINCTRL=y
 164 +CONFIG_PINCONF=y
 165 +CONFIG_PINCTRL_MT7986=y
 166 +CONFIG_POWER_DOMAIN=y
 167 +CONFIG_MTK_POWER_DOMAIN=y
 168 +CONFIG_DM_REGULATOR=y
 169 +CONFIG_DM_REGULATOR_FIXED=y
 170 +CONFIG_DM_SERIAL=y
 171 +CONFIG_MTK_SERIAL=y
 172 +CONFIG_HEXDUMP=y
 173 +CONFIG_USE_DEFAULT_ENV_FILE=y
 174 +CONFIG_MTD_SPI_NAND=y
 175 +CONFIG_MTK_SPIM=y
 176 +CONFIG_CMD_MTD=y
 177 +CONFIG_CMD_NAND=y
 178 +CONFIG_CMD_NAND_TRIMFFS=y
 179 +CONFIG_LMB_MAX_REGIONS=64
 180 +CONFIG_USE_IPADDR=y
 181 +CONFIG_IPADDR="192.168.1.1"
 182 +CONFIG_USE_SERVERIP=y
 183 +CONFIG_SERVERIP="192.168.1.254"
 184 --- /dev/null
 185 +++ b/arch/arm/dts/mt7986a-xiaomi_redmi-ax6000.dts
 186 @@ -0,0 +1,156 @@
 187 +// SPDX-License-Identifier: GPL-2.0
 188 +/*
 189 + * Copyright (c) 2021 MediaTek Inc.
 190 + * Author: Sam Shih <sam.shih@mediatek.com>
 191 + */
 192 +
 193 +/dts-v1/;
 194 +#include <dt-bindings/input/linux-event-codes.h>
 195 +#include "mt7986.dtsi"
 196 +#include <dt-bindings/gpio/gpio.h>
 197 +
 198 +/ {
 199 +       #address-cells = <1>;
 200 +       #size-cells = <1>;
 201 +       model = "Xiaomi Redmi AX6000";
 202 +       compatible = "mediatek,mt7986", "mediatek,mt7986-sd-rfb";
 203 +
 204 +       chosen {
 205 +               stdout-path = &uart0;
 206 +               tick-timer = &timer0;
 207 +       };
 208 +
 209 +       keys {
 210 +               compatible = "gpio-keys";
 211 +               factory {
 212 +                       label = "reset";
 213 +                       gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
 214 +                       linux,code = <KEY_RESTART>;
 215 +               };
 216 +               mesh {
 217 +                       label = "mesh";
 218 +                       gpios = <&gpio 10 GPIO_ACTIVE_LOW>;
 219 +                       linux,code = <KEY_WPS_BUTTON>;
 220 +               };
 221 +       };
 222 +};
 223 +
 224 +&uart0 {
 225 +       mediatek,force-highspeed;
 226 +       status = "okay";
 227 +};
 228 +
 229 +&uart1 {
 230 +       pinctrl-names = "default";
 231 +       pinctrl-0 = <&uart1_pins>;
 232 +       status = "disabled";
 233 +};
 234 +
 235 +&eth {
 236 +       status = "okay";
 237 +       mediatek,gmac-id = <0>;
 238 +       phy-mode = "sgmii";
 239 +       mediatek,switch = "mt7531";
 240 +       reset-gpios = <&gpio 5 GPIO_ACTIVE_HIGH>;
 241 +
 242 +       fixed-link {
 243 +               speed = <1000>;
 244 +               full-duplex;
 245 +       };
 246 +};
 247 +
 248 +&pinctrl {
 249 +       spic_pins: spi1-pins-func-1 {
 250 +               mux {
 251 +                       function = "spi";
 252 +                       groups = "spi1_2";
 253 +               };
 254 +       };
 255 +
 256 +       uart1_pins: spi1-pins-func-3 {
 257 +               mux {
 258 +                       function = "uart";
 259 +                       groups = "uart1_2";
 260 +               };
 261 +       };
 262 +
 263 +       spi_flash_pins: spi0-pins-func-1 {
 264 +               mux {
 265 +                       function = "flash";
 266 +                       groups = "spi0", "spi0_wp_hold";
 267 +               };
 268 +
 269 +               conf-pu {
 270 +                       pins = "SPI2_CS", "SPI2_HOLD", "SPI2_WP";
 271 +                       drive-strength = <MTK_DRIVE_8mA>;
 272 +                       bias-pull-up = <MTK_PUPD_SET_R1R0_00>;
 273 +               };
 274 +
 275 +               conf-pd {
 276 +                       pins = "SPI2_CLK", "SPI2_MOSI", "SPI2_MISO";
 277 +                       drive-strength = <MTK_DRIVE_8mA>;
 278 +                       bias-pull-down = <MTK_PUPD_SET_R1R0_00>;
 279 +               };
 280 +       };
 281 +};
 282 +
 283 +&spi0 {
 284 +       #address-cells = <1>;
 285 +       #size-cells = <0>;
 286 +       pinctrl-names = "default";
 287 +       pinctrl-0 = <&spi_flash_pins>;
 288 +       status = "okay";
 289 +       must_tx;
 290 +       enhance_timing;
 291 +       dma_ext;
 292 +       ipm_design;
 293 +       support_quad;
 294 +       tick_dly = <1>;
 295 +       sample_sel = <0>;
 296 +
 297 +       spi_nand@0 {
 298 +               compatible = "spi-nand";
 299 +               reg = <0>;
 300 +               spi-max-frequency = <52000000>;
 301 +
 302 +               partitions {
 303 +                       compatible = "fixed-partitions";
 304 +                       #address-cells = <1>;
 305 +                       #size-cells = <1>;
 306 +
 307 +                       partition@0 {
 308 +                               label = "bl2";
 309 +                               reg = <0x0 0x80000>;
 310 +                       };
 311 +
 312 +                       partition@100000 {
 313 +                               label = "nvram";
 314 +                               reg = <0x100000 0x40000>;
 315 +                       };
 316 +
 317 +                       partition@140000 {
 318 +                               label = "bdata";
 319 +                               reg = <0x140000 0x40000>;
 320 +                       };
 321 +
 322 +                       partition@180000 {
 323 +                               label = "factory";
 324 +                               reg = <0x180000 0x200000>;
 325 +                       };
 326 +
 327 +                       partition@380000 {
 328 +                               label = "fip";
 329 +                               reg = <0x380000 0x200000>;
 330 +                       };
 331 +
 332 +                       partition@600000 {
 333 +                               label = "ubi";
 334 +                               reg = <0x580000 0x7a80000>;
 335 +                       };
 336 +               };
 337 +       };
 338 +};
 339 +
 340 +&watchdog {
 341 +       status = "disabled";
 342 +};
 343 --- /dev/null
 344 +++ b/xiaomi_redmi-ax6000_env
 345 @@ -0,0 +1,55 @@
 346 +ethaddr_factory=mtd read factory 0x40080000 0x0 0x20000 && env readmem -b ethaddr 0x40080004 0x6 ; setenv ethaddr_factory
 347 +ipaddr=192.168.1.1
 348 +serverip=192.168.1.254
 349 +loadaddr=0x46000000
 350 +console=earlycon=uart8250,mmio32,0x11002000 console=ttyS0
 351 +bootargs=console=ttyS0,115200n8 console_msg_format=syslog
 352 +bootcmd=if pstore check ; then run boot_recovery ; else run boot_ubi ; fi
 353 +bootconf=config-1
 354 +bootdelay=0
 355 +bootfile=openwrt-mediatek-filogic-xiaomi_redmi-router-ax6000-ubootmod-initramfs-recovery.itb
 356 +bootfile_bl2=openwrt-mediatek-filogic-xiaomi_redmi-router-ax6000-ubootmod-preloader.bin
 357 +bootfile_fip=openwrt-mediatek-filogic-xiaomi_redmi-router-ax6000-ubootmod-bl31-uboot.fip
 358 +bootfile_upg=openwrt-mediatek-filogic-xiaomi_redmi-router-ax6000-ubootmod-squashfs-sysupgrade.itb
 359 +bootmenu_confirm_return=askenv - Press ENTER to return to menu ; bootmenu 60
 360 +bootmenu_default=0
 361 +bootmenu_delay=0
 362 +bootmenu_title=      \e[0;34m( ( ( \e[1;39mOpenWrt\e[0;34m ) ) )
 363 +bootmenu_0=Initialize environment.=run _firstboot
 364 +bootmenu_0d=Run default boot command.=run boot_default
 365 +bootmenu_1=Boot system via TFTP.=run boot_tftp ; run bootmenu_confirm_return
 366 +bootmenu_2=Boot production system from NAND.=run boot_production ; run bootmenu_confirm_return
 367 +bootmenu_3=Boot recovery system from NAND.=run boot_recovery ; run bootmenu_confirm_return
 368 +bootmenu_4=Load production system via TFTP then write to NAND.=setenv noboot 1 ; setenv replacevol 1 ; run boot_tftp_production ; setenv noboot ; setenv replacevol ; run bootmenu_confirm_return
 369 +bootmenu_5=Load recovery system via TFTP then write to NAND.=setenv noboot 1 ; setenv replacevol 1 ; run boot_tftp_recovery ; setenv noboot ; setenv replacevol ; run bootmenu_confirm_return
 370 +bootmenu_6=\e[31mLoad BL31+U-Boot FIP via TFTP then write to NAND.\e[0m=run boot_tftp_write_fip ; run bootmenu_confirm_return
 371 +bootmenu_7=\e[31mLoad BL2 preloader via TFTP then write to NAND.\e[0m=run boot_tftp_write_bl2 ; run bootmenu_confirm_return
 372 +bootmenu_8=Reboot.=reset
 373 +bootmenu_9=Reset all settings to factory defaults.=run reset_factory ; reset
 374 +boot_first=if button reset ; then run boot_tftp_recovery ; setenv flag_recover 1 ; run boot_default ; fi ; bootmenu
 375 +boot_default=if env exists flag_recover ; then else run bootcmd ; fi ; run boot_recovery ; setenv replacevol 1 ; run boot_tftp_forever
 376 +boot_production=run ubi_read_production && bootm $loadaddr#$bootconf
 377 +boot_recovery=run ubi_read_recovery && bootm $loadaddr#$bootconf
 378 +boot_ubi=run boot_production ; run boot_recovery ; run boot_tftp_forever
 379 +boot_tftp_forever=while true ; do run boot_tftp_recovery ; sleep 1 ; done
 380 +boot_tftp_recovery=tftpboot $loadaddr $bootfile && env exists replacevol && iminfo $loadaddr && run ubi_write_recovery ; if env exists noboot ; then else bootm $loadaddr#$bootconf ; fi
 381 +boot_tftp_production=tftpboot $loadaddr $bootfile_upg && env exists replacevol && iminfo $loadaddr && run ubi_write_production ; if env exists noboot ; then else bootm $loadaddr#$bootconf ; fi
 382 +boot_tftp=tftpboot $loadaddr $bootfile && bootm $loadaddr#$bootconf
 383 +boot_tftp_write_fip=tftpboot $loadaddr $bootfile_fip && run mtd_write_fip && run reset_factory
 384 +boot_tftp_write_bl2=tftpboot $loadaddr $bootfile_bl2 && run mtd_write_bl2
 385 +part_fit=fit
 386 +reset_factory=ubi part ubi ; mw $loadaddr 0x0 0x800 ; ubi write $loadaddr ubootenv 0x800 ; ubi write $loadaddr ubootenv2 0x800
 387 +mtd_write_fip=mtd erase fip && mtd write fip $loadaddr
 388 +mtd_write_bl2=mtd erase bl2 && mtd write bl2 $loadaddr
 389 +ubi_create_env=ubi check ubootenv || ubi create ubootenv 0x100000 dynamic 0 ; ubi check ubootenv2 || ubi create ubootenv2 0x100000 dynamic 1
 390 +ubi_format=ubi detach ; mtd erase ubi && ubi part ubi ; reset
 391 +ubi_prepare_rootfs=if ubi check rootfs_data ; then else if env exists rootfs_data_max ; then ubi create rootfs_data $rootfs_data_max dynamic || ubi create rootfs_data - dynamic ; else ubi create rootfs_data - dynamic ; fi ; fi
 392 +ubi_read_production=ubi read $loadaddr $part_fit && iminfo $loadaddr && run ubi_prepare_rootfs
 393 +ubi_read_recovery=ubi check recovery && ubi read $loadaddr recovery
 394 +ubi_remove_rootfs=ubi check rootfs_data && ubi remove rootfs_data
 395 +ubi_write_production=ubi check fit && ubi remove fit ; run ubi_remove_rootfs ; ubi create fit $filesize dynamic && ubi write $loadaddr fit $filesize
 396 +ubi_write_recovery=ubi check recovery && ubi remove recovery ; run ubi_remove_rootfs ; ubi create recovery $filesize dynamic && ubi write $loadaddr recovery $filesize
 397 +_init_env=setenv _init_env ; run ubi_create_env ; saveenv ; saveenv
 398 +_firstboot=setenv _firstboot ; run ethaddr_factory ; run _switch_to_menu ; run _init_env ; run boot_first
 399 +_switch_to_menu=setenv _switch_to_menu ; setenv bootdelay 3 ; setenv bootmenu_delay 3 ; setenv bootmenu_0 $bootmenu_0d ; setenv bootmenu_0d ; run _bootmenu_update_title
 400 +_bootmenu_update_title=setenv _bootmenu_update_title ; setenv bootmenu_title "$bootmenu_title       \e[33m$ver\e[0m"