target/linux/lantiq/files/arch/mips/boot/dts/BTHOMEHUBV5A.dts

   1 /dts-v1/;
   2
   3 #include "vr9.dtsi"
   4
   5 #include <dt-bindings/input/input.h>
   6 #include <dt-bindings/mips/lantiq_rcu_gphy.h>
   7
   8 / {
   9         compatible = "bt,homehub-v5a", "lantiq,xway", "lantiq,vr9";
  10         model = "BT Home Hub 5A";
  11
  12         chosen {
  13                 bootargs = "console=ttyLTQ0,115200";
  14         };
  15
  16         aliases {
  17                 led-boot = &power_green;
  18                 led-failsafe = &power_red;
  19                 led-running = &power_blue;
  20                 led-upgrade = &power_blue;
  21
  22                 led-dsl = &broadband_blue;
  23                 led-wifi = &wireless_blue;
  24         };
  25
  26         memory@0 {
  27                 device_type = "memory";
  28                 reg = <0x0 0x8000000>;
  29         };
  30
  31         gpio-keys-polled {
  32                 compatible = "gpio-keys-polled";
  33                 poll-interval = <100>;
  34
  35                 reset {
  36                         label = "reset";
  37                         gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
  38                         linux,code = <KEY_RESTART>;
  39                 };
  40
  41                 wps {
  42                         label = "wps";
  43                         gpios = <&gpio 25 GPIO_ACTIVE_LOW>;
  44                         linux,code = <KEY_WPS_BUTTON>;
  45                 };
  46
  47                 restart {
  48                         label = "restart";
  49                         gpios = <&gpio 39 GPIO_ACTIVE_LOW>;
  50                         linux,code = <KEY_POWER2>;
  51                 };
  52         };
  53
  54         gpio-leds {
  55                 compatible = "gpio-leds";
  56
  57                 /* broadband-* is a single RGB led */
  58                 broadband-red {
  59                         label = "bthomehubv5a:red:broadband";
  60                         gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
  61                 };
  62                 broadband-green {
  63                         label = "bthomehubv5a:green:broadband";
  64                         gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
  65                 };
  66                 broadband_blue: broadband-blue {
  67                         label = "bthomehubv5a:blue:broadband";
  68                         gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
  69                 };
  70
  71                 /* wireless-* is a single RGB led */
  72                 wireless-red {
  73                         label = "bthomehubv5a:red:wireless";
  74                         gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
  75                 };
  76                 wireless-green {
  77                         label = "bthomehubv5a:green:wireless";
  78                         gpios = <&gpio 10 GPIO_ACTIVE_LOW>;
  79                 };
  80                 wireless_blue: wireless-blue {
  81                         label = "bthomehubv5a:blue:wireless";
  82                         gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
  83                 };
  84
  85                 /* power-* is a single RGB led */
  86                 power_red: power-red {
  87                         label = "bthomehubv5a:red:power";
  88                         gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
  89                 };
  90                 power_green: power-green {
  91                         label = "bthomehubv5a:green:power";
  92                         gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
  93                         default-state = "keep";
  94                 };
  95                 power_blue: power-blue {
  96                         label = "bthomehubv5a:blue:power";
  97                         gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
  98                 };
  99
 100                 dimmed {
 101                         label = "dimmed";
 102                         gpios = <&gpio 19 GPIO_ACTIVE_HIGH>;
 103                 };
 104         };
 105
 106         usb_vbus: regulator-usb-vbus {
 107                 compatible = "regulator-fixed";
 108
 109                 regulator-name = "USB_VBUS";
 110
 111                 regulator-min-microvolt = <5000000>;
 112                 regulator-max-microvolt = <5000000>;
 113
 114                 gpio = <&gpio 33 GPIO_ACTIVE_HIGH>;
 115                 enable-active-high;
 116         };
 117 };
 118
 119 &eth0 {
 120         lan: interface@0 {
 121                 compatible = "lantiq,xrx200-pdi";
 122                 #address-cells = <1>;
 123                 #size-cells = <0>;
 124                 reg = <0>;
 125                 lantiq,switch;
 126
 127                 ethernet@0 {
 128                         compatible = "lantiq,xrx200-pdi-port";
 129                         reg = <0>;
 130                         phy-mode = "rgmii";
 131                         phy-handle = <&phy0>;
 132                 };
 133                 ethernet@1 {
 134                         compatible = "lantiq,xrx200-pdi-port";
 135                         reg = <1>;
 136                         phy-mode = "rgmii";
 137                         phy-handle = <&phy1>;
 138                 };
 139                 ethernet@2 {
 140                         compatible = "lantiq,xrx200-pdi-port";
 141                         reg = <2>;
 142                         phy-mode = "gmii";
 143                         phy-handle = <&phy11>;
 144                 };
 145                 ethernet@4 {
 146                         compatible = "lantiq,xrx200-pdi-port";
 147                         reg = <4>;
 148                         phy-mode = "gmii";
 149                         phy-handle = <&phy13>;
 150                 };
 151                 ethernet@5 {
 152                         compatible = "lantiq,xrx200-pdi-port";
 153                         reg = <5>;
 154                         phy-mode = "rgmii";
 155                         phy-handle = <&phy5>;
 156                 };
 157         };
 158
 159         mdio {
 160                 #address-cells = <1>;
 161                 #size-cells = <0>;
 162                 compatible = "lantiq,xrx200-mdio";
 163
 164                 phy0: ethernet-phy@0 {
 165                         reg = <0x0>;
 166                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 167                 };
 168                 phy1: ethernet-phy@1 {
 169                         reg = <0x1>;
 170                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 171                 };
 172                 phy5: ethernet-phy@5 {
 173                         reg = <0x5>;
 174                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 175                 };
 176                 phy11: ethernet-phy@11 {
 177                         reg = <0x11>;
 178                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 179                 };
 180                 phy13: ethernet-phy@13 {
 181                         reg = <0x13>;
 182                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 183                 };
 184         };
 185 };
 186
 187 &gphy0 {
 188         lantiq,gphy-mode = <GPHY_MODE_GE>;
 189 };
 190
 191 &gphy1 {
 192         lantiq,gphy-mode = <GPHY_MODE_GE>;
 193 };
 194
 195 &gpio {
 196         pinctrl-names = "default";
 197         pinctrl-0 = <&state_default>;
 198
 199         state_default: pinmux {
 200                 mdio {
 201                         lantiq,groups = "mdio";
 202                         lantiq,function = "mdio";
 203                 };
 204                 pci_rst {
 205                         lantiq,pins = "io21";
 206                         lantiq,output = <1>;
 207                         lantiq,open-drain;
 208                 };
 209                 pcie_rst {
 210                         lantiq,pins = "io38";
 211                         lantiq,pull = <0>;
 212                         lantiq,output = <1>;
 213                         lantiq,open-drain;
 214                 };
 215                 usb_vbus {
 216                         lantiq,pins = "io33";
 217                         lantiq,pull = <0>;
 218                         lantiq,open-drain = <0>;
 219                         lantiq,output = <1>;
 220                 };
 221                 nand_out {
 222                         lantiq,groups = "nand cle", "nand ale";
 223                         lantiq,function = "ebu";
 224                         lantiq,output = <1>;
 225                         lantiq,open-drain = <0>;
 226                         lantiq,pull = <0>;
 227                 };
 228                 nand_cs1 {
 229                         lantiq,groups = "nand cs1";
 230                         lantiq,function = "ebu";
 231                         lantiq,open-drain = <0>;
 232                         lantiq,pull = <0>;
 233                 };
 234         };
 235 };
 236
 237 &localbus {
 238         nand@1 {
 239                 compatible = "lantiq,nand-xway";
 240                 lantiq,cs = <1>;
 241                 bank-width = <2>;
 242                 reg = <0x1 0x0 0x2000000>;
 243                 nand-on-flash-bbt;
 244                 nand-ecc-strength = <3>;
 245                 nand-ecc-step-size = <256>;
 246
 247                 partitions {
 248                         compatible = "fixed-partitions";
 249                         #address-cells = <1>;
 250                         #size-cells = <1>;
 251
 252                         partition@0 {
 253                                 label = "u-boot";
 254                                 reg = <0x0 0xa0000>;
 255                                 read-only;
 256                         };
 257                         partition@a0000 {
 258                                 label = "uboot-env";
 259                                 reg = <0xa0000 0x20000>;
 260                                 read-only;
 261                         };
 262                         partition@c0000 {
 263                                 label = "unused";
 264                                 reg = <0xc0000 0x40000>;
 265                         };
 266                         partition@100000 {
 267                                 label = "ubi";
 268                                 reg = <0x100000 0x7e80000>;
 269                         };
 270                         /*
 271                          * last 512 KiB are for the bad block table, not writable
 272                          */
 273                 };
 274         };
 275 };
 276
 277 &pci0 {
 278         status = "okay";
 279         gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
 280
 281         wifi@168c,002d {
 282                 compatible = "pci168c,002d";
 283                 reg = <0x7000 0 0 0 0>;
 284                 qca,no-eeprom; /* load from ath9k-eeprom-pci-0000:00:0e.0.bin */
 285                 qca,disable-5ghz;
 286         };
 287 };
 288
 289 &usb_phy0 {
 290         status = "okay";
 291 };
 292
 293 &usb0 {
 294         status = "okay";
 295         vbus-supply = <&usb_vbus>;
 296 };