This is an automatically generated commit.
During a `git bisect` session, `git bisect --skip` is recommended.
Signed-off-by: Mieczyslaw Nalewaj <namiltd@yahoo.com>
+++ /dev/null
---- a/drivers/clocksource/timer-cs5535.c
-+++ b/drivers/clocksource/timer-cs5535.c
-@@ -127,7 +127,9 @@ static irqreturn_t mfgpt_tick(int irq, v
- cs5535_mfgpt_write(cs5535_event_clock, MFGPT_REG_SETUP,
- MFGPT_SETUP_CNTEN | MFGPT_SETUP_CMP2);
-
-- cs5535_clockevent.event_handler(&cs5535_clockevent);
-+ if (cs5535_clockevent.event_handler)
-+ cs5535_clockevent.event_handler(&cs5535_clockevent);
-+
- return IRQ_HANDLED;
- }
-
+++ /dev/null
-From 970d9af9015a387bb81841faf05dcc1a171eb97a Mon Sep 17 00:00:00 2001
-From: Philip Prindeville <philipp@redfish-solutions.com>
-Date: Sun, 1 Jan 2023 15:25:04 -0700
-Subject: [PATCH v3 1/1] x86: Support APU5 in PCEngines platform driver
-To: platform-driver-x86@vger.kernel.org, linux-x86_64@vger.kernel.org
-Cc: Ed Wildgoose <lists@wildgooses.com>, Andres Salomon <dilinger@queued.net>, Andreas Eberlein <foodeas@aeberlein.de>, Paul Spooren <paul@spooren.de>
-
-PCEngines make a number of SBC. APU5 has 5 mpcie slots + MSATA.
-It also has support for 3x LTE modems with 6x SIM slots (pairs with a
-SIM switch device). Each mpcie slot for modems has a reset GPIO
-
-To ensure that the naming is sane between APU2-6 the GPIOS are
-renamed to be modem1-reset, modem2-reset, etc. This is significant
-because the slots that can be reset change between APU2 and APU3/4
-
-GPIO for simswap is moved to the end of the list as it could be dropped
-for APU2 boards (but causes no harm to leave it in, hardware could be
-added to a future rev of the board).
-
-Structure of the GPIOs for APU5 is extremely similar to APU2-4, but
-many lines are moved around and there are simply more
-modems/resets/sim-swap lines to breakout.
-
-Also added APU6, which is essentially APU4 with a different ethernet
-interface and SFP cage on eth0.
-
-Revision history:
-
-v1: originally titled, "apu6: add apu6 variation to apu2 driver family"
-this dealt only with detecting the APUv6, which is otherwise identical
-to the v4 excepting the SFP cage on eth0.
-
-v2: at Ed's request, merged with his previous pull-request titled
-"x86: Support APU5 in PCEngines platform driver", and some cleanup
-to that changeset (including dropping the table "apu5_driver_data"
-which did not have a defined type "struct apu_driver_data"), but got
-mistitled when the Subject of that commit got accidentally dropped.
-
-v3: retitled to match Ed's previous pull-request.
-
-Cc: platform-driver-x86@vger.kernel.org
-Cc: linux-x86_64@vger.kernel.org
-Reviewed-by: Andreas Eberlein <foodeas@aeberlein.de>
-Reviewed-by: Paul Spooren <paul@spooren.de>
-Signed-off-by: Ed Wildgoose <lists@wildgooses.com>
-Sighed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
----
- drivers/leds/leds-apu.c | 2 +-
- drivers/platform/x86/Kconfig | 4 +-
- drivers/platform/x86/pcengines-apuv2.c | 118 ++++++++++++++++++++++---
- 3 files changed, 107 insertions(+), 17 deletions(-)
-
---- a/drivers/leds/leds-apu.c
-+++ b/drivers/leds/leds-apu.c
-@@ -183,7 +183,7 @@ static int __init apu_led_init(void)
-
- if (!(dmi_match(DMI_SYS_VENDOR, "PC Engines") &&
- (dmi_match(DMI_PRODUCT_NAME, "APU") || dmi_match(DMI_PRODUCT_NAME, "apu1")))) {
-- pr_err("No PC Engines APUv1 board detected. For APUv2,3 support, enable CONFIG_PCENGINES_APU2\n");
-+ pr_err("No PC Engines APUv1 board detected. For APUv2,3,4,5,6 support, enable CONFIG_PCENGINES_APU2\n");
- return -ENODEV;
- }
-
---- a/drivers/platform/x86/Kconfig
-+++ b/drivers/platform/x86/Kconfig
-@@ -698,7 +698,7 @@ config XO1_RFKILL
- laptop.
-
- config PCENGINES_APU2
-- tristate "PC Engines APUv2/3 front button and LEDs driver"
-+ tristate "PC Engines APUv2/3/4/5/6 front button and LEDs driver"
- depends on INPUT && INPUT_KEYBOARD && GPIOLIB
- depends on LEDS_CLASS
- select GPIO_AMD_FCH
-@@ -706,7 +706,7 @@ config PCENGINES_APU2
- select LEDS_GPIO
- help
- This driver provides support for the front button and LEDs on
-- PC Engines APUv2/APUv3 board.
-+ PC Engines APUv2/APUv3/APUv4/APUv5/APUv6 board.
-
- To compile this driver as a module, choose M here: the module
- will be called pcengines-apuv2.
---- a/drivers/platform/x86/pcengines-apuv2.c
-+++ b/drivers/platform/x86/pcengines-apuv2.c
-@@ -1,10 +1,12 @@
- // SPDX-License-Identifier: GPL-2.0+
-
- /*
-- * PC-Engines APUv2/APUv3 board platform driver
-+ * PC-Engines APUv2-6 board platform driver
- * for GPIO buttons and LEDs
- *
- * Copyright (C) 2018 metux IT consult
-+ * Copyright (C) 2022 Ed Wildgoose <lists@wildgooses.com>
-+ * Copyright (C) 2022 Philip Prindeville <philipp@redfish-solutions.com>
- * Author: Enrico Weigelt <info@metux.net>
- */
-
-@@ -22,38 +24,70 @@
- #include <linux/platform_data/gpio/gpio-amd-fch.h>
-
- /*
-- * NOTE: this driver only supports APUv2/3 - not APUv1, as this one
-+ * NOTE: this driver only supports APUv2-6 - not APUv1, as this one
- * has completely different register layouts.
- */
-
-+/*
-+ * There are a number of APU variants, with differing features
-+ * APU2 has SIM slots 1/2 mapping to mPCIe sockets 1/2
-+ * APU3/4 moved SIM slot 1 to mPCIe socket 3, ie logically reversed
-+ * However, most APU3/4 have a SIM switch which we default on to reverse
-+ * the order and keep physical SIM order matching physical modem order
-+ * APU6 is approximately the same as APU4 with different ethernet layout
-+ *
-+ * APU5 has 3x SIM sockets, all with a SIM switch
-+ * several GPIOs are shuffled (see schematic), including MODESW
-+ */
-+
- /* Register mappings */
- #define APU2_GPIO_REG_LED1 AMD_FCH_GPIO_REG_GPIO57
- #define APU2_GPIO_REG_LED2 AMD_FCH_GPIO_REG_GPIO58
- #define APU2_GPIO_REG_LED3 AMD_FCH_GPIO_REG_GPIO59_DEVSLP1
- #define APU2_GPIO_REG_MODESW AMD_FCH_GPIO_REG_GPIO32_GE1
- #define APU2_GPIO_REG_SIMSWAP AMD_FCH_GPIO_REG_GPIO33_GE2
--#define APU2_GPIO_REG_MPCIE2 AMD_FCH_GPIO_REG_GPIO55_DEVSLP0
--#define APU2_GPIO_REG_MPCIE3 AMD_FCH_GPIO_REG_GPIO51
-+#define APU2_GPIO_REG_RESETM1 AMD_FCH_GPIO_REG_GPIO51
-+#define APU2_GPIO_REG_RESETM2 AMD_FCH_GPIO_REG_GPIO55_DEVSLP0
-+
-+#define APU5_GPIO_REG_MODESW AMT_FCH_GPIO_REG_GEVT22
-+#define APU5_GPIO_REG_SIMSWAP1 AMD_FCH_GPIO_REG_GPIO68
-+#define APU5_GPIO_REG_SIMSWAP2 AMD_FCH_GPIO_REG_GPIO32_GE1
-+#define APU5_GPIO_REG_SIMSWAP3 AMD_FCH_GPIO_REG_GPIO33_GE2
-+#define APU5_GPIO_REG_RESETM1 AMD_FCH_GPIO_REG_GPIO51
-+#define APU5_GPIO_REG_RESETM2 AMD_FCH_GPIO_REG_GPIO55_DEVSLP0
-+#define APU5_GPIO_REG_RESETM3 AMD_FCH_GPIO_REG_GPIO64
-
- /* Order in which the GPIO lines are defined in the register list */
- #define APU2_GPIO_LINE_LED1 0
- #define APU2_GPIO_LINE_LED2 1
- #define APU2_GPIO_LINE_LED3 2
- #define APU2_GPIO_LINE_MODESW 3
--#define APU2_GPIO_LINE_SIMSWAP 4
--#define APU2_GPIO_LINE_MPCIE2 5
--#define APU2_GPIO_LINE_MPCIE3 6
-+#define APU2_GPIO_LINE_RESETM1 4
-+#define APU2_GPIO_LINE_RESETM2 5
-+#define APU2_GPIO_LINE_SIMSWAP 6
-+
-+#define APU5_GPIO_LINE_LED1 0
-+#define APU5_GPIO_LINE_LED2 1
-+#define APU5_GPIO_LINE_LED3 2
-+#define APU5_GPIO_LINE_MODESW 3
-+#define APU5_GPIO_LINE_RESETM1 4
-+#define APU5_GPIO_LINE_RESETM2 5
-+#define APU5_GPIO_LINE_RESETM3 6
-+#define APU5_GPIO_LINE_SIMSWAP1 7
-+#define APU5_GPIO_LINE_SIMSWAP2 8
-+#define APU5_GPIO_LINE_SIMSWAP3 9
-+
-
--/* GPIO device */
-+/* GPIO device - APU2/3/4/6 */
-
- static int apu2_gpio_regs[] = {
- [APU2_GPIO_LINE_LED1] = APU2_GPIO_REG_LED1,
- [APU2_GPIO_LINE_LED2] = APU2_GPIO_REG_LED2,
- [APU2_GPIO_LINE_LED3] = APU2_GPIO_REG_LED3,
- [APU2_GPIO_LINE_MODESW] = APU2_GPIO_REG_MODESW,
-+ [APU2_GPIO_LINE_RESETM1] = APU2_GPIO_REG_RESETM1,
-+ [APU2_GPIO_LINE_RESETM2] = APU2_GPIO_REG_RESETM2,
- [APU2_GPIO_LINE_SIMSWAP] = APU2_GPIO_REG_SIMSWAP,
-- [APU2_GPIO_LINE_MPCIE2] = APU2_GPIO_REG_MPCIE2,
-- [APU2_GPIO_LINE_MPCIE3] = APU2_GPIO_REG_MPCIE3,
- };
-
- static const char * const apu2_gpio_names[] = {
-@@ -61,9 +95,9 @@ static const char * const apu2_gpio_name
- [APU2_GPIO_LINE_LED2] = "front-led2",
- [APU2_GPIO_LINE_LED3] = "front-led3",
- [APU2_GPIO_LINE_MODESW] = "front-button",
-+ [APU2_GPIO_LINE_RESETM1] = "modem1-reset",
-+ [APU2_GPIO_LINE_RESETM2] = "modem2-reset",
- [APU2_GPIO_LINE_SIMSWAP] = "simswap",
-- [APU2_GPIO_LINE_MPCIE2] = "mpcie2_reset",
-- [APU2_GPIO_LINE_MPCIE3] = "mpcie3_reset",
- };
-
- static const struct amd_fch_gpio_pdata board_apu2 = {
-@@ -72,6 +106,40 @@ static const struct amd_fch_gpio_pdata b
- .gpio_names = apu2_gpio_names,
- };
-
-+/* GPIO device - APU5 */
-+
-+static int apu5_gpio_regs[] = {
-+ [APU5_GPIO_LINE_LED1] = APU2_GPIO_REG_LED1,
-+ [APU5_GPIO_LINE_LED2] = APU2_GPIO_REG_LED2,
-+ [APU5_GPIO_LINE_LED3] = APU2_GPIO_REG_LED3,
-+ [APU5_GPIO_LINE_MODESW] = APU5_GPIO_REG_MODESW,
-+ [APU5_GPIO_LINE_RESETM1] = APU5_GPIO_REG_RESETM1,
-+ [APU5_GPIO_LINE_RESETM2] = APU5_GPIO_REG_RESETM2,
-+ [APU5_GPIO_LINE_RESETM3] = APU5_GPIO_REG_RESETM3,
-+ [APU5_GPIO_LINE_SIMSWAP1] = APU5_GPIO_REG_SIMSWAP1,
-+ [APU5_GPIO_LINE_SIMSWAP2] = APU5_GPIO_REG_SIMSWAP2,
-+ [APU5_GPIO_LINE_SIMSWAP3] = APU5_GPIO_REG_SIMSWAP3,
-+};
-+
-+static const char * const apu5_gpio_names[] = {
-+ [APU5_GPIO_LINE_LED1] = "front-led1",
-+ [APU5_GPIO_LINE_LED2] = "front-led2",
-+ [APU5_GPIO_LINE_LED3] = "front-led3",
-+ [APU5_GPIO_LINE_MODESW] = "front-button",
-+ [APU5_GPIO_LINE_RESETM1] = "modem1-reset",
-+ [APU5_GPIO_LINE_RESETM2] = "modem2-reset",
-+ [APU5_GPIO_LINE_RESETM3] = "modem3-reset",
-+ [APU5_GPIO_LINE_SIMSWAP1] = "simswap1",
-+ [APU5_GPIO_LINE_SIMSWAP2] = "simswap2",
-+ [APU5_GPIO_LINE_SIMSWAP3] = "simswap3",
-+};
-+
-+static const struct amd_fch_gpio_pdata board_apu5 = {
-+ .gpio_num = ARRAY_SIZE(apu5_gpio_regs),
-+ .gpio_reg = apu5_gpio_regs,
-+ .gpio_names = apu5_gpio_names,
-+};
-+
- /* GPIO LEDs device */
-
- static const struct gpio_led apu2_leds[] = {
-@@ -215,6 +283,24 @@ static const struct dmi_system_id apu_gp
- },
- .driver_data = (void *)&board_apu2,
- },
-+ /* APU5 w/ mainline BIOS */
-+ {
-+ .ident = "apu5",
-+ .matches = {
-+ DMI_MATCH(DMI_SYS_VENDOR, "PC Engines"),
-+ DMI_MATCH(DMI_BOARD_NAME, "apu5")
-+ },
-+ .driver_data = (void *)&board_apu5,
-+ },
-+ /* APU6 w/ mainline BIOS */
-+ {
-+ .ident = "apu6",
-+ .matches = {
-+ DMI_MATCH(DMI_SYS_VENDOR, "PC Engines"),
-+ DMI_MATCH(DMI_BOARD_NAME, "apu6")
-+ },
-+ .driver_data = (void *)&board_apu2,
-+ },
- {}
- };
-
-@@ -249,7 +335,7 @@ static int __init apu_board_init(void)
-
- id = dmi_first_match(apu_gpio_dmi_table);
- if (!id) {
-- pr_err("failed to detect APU board via DMI\n");
-+ pr_err("No APU board detected via DMI\n");
- return -ENODEV;
- }
-
-@@ -288,8 +374,12 @@ module_init(apu_board_init);
- module_exit(apu_board_exit);
-
- MODULE_AUTHOR("Enrico Weigelt, metux IT consult <info@metux.net>");
--MODULE_DESCRIPTION("PC Engines APUv2/APUv3 board GPIO/LEDs/keys driver");
-+MODULE_DESCRIPTION("PC Engines APUv2-6 board GPIO/LEDs/keys driver");
- MODULE_LICENSE("GPL");
- MODULE_DEVICE_TABLE(dmi, apu_gpio_dmi_table);
- MODULE_ALIAS("platform:pcengines-apuv2");
-+MODULE_ALIAS("platform:pcengines-apuv3");
-+MODULE_ALIAS("platform:pcengines-apuv4");
-+MODULE_ALIAS("platform:pcengines-apuv5");
-+MODULE_ALIAS("platform:pcengines-apuv6");
- MODULE_SOFTDEP("pre: platform:" AMD_FCH_GPIO_DRIVER_NAME " platform:leds-gpio platform:gpio_keys_polled");
--- /dev/null
+--- a/drivers/clocksource/timer-cs5535.c
++++ b/drivers/clocksource/timer-cs5535.c
+@@ -127,7 +127,9 @@ static irqreturn_t mfgpt_tick(int irq, v
+ cs5535_mfgpt_write(cs5535_event_clock, MFGPT_REG_SETUP,
+ MFGPT_SETUP_CNTEN | MFGPT_SETUP_CMP2);
+
+- cs5535_clockevent.event_handler(&cs5535_clockevent);
++ if (cs5535_clockevent.event_handler)
++ cs5535_clockevent.event_handler(&cs5535_clockevent);
++
+ return IRQ_HANDLED;
+ }
+
--- /dev/null
+From 970d9af9015a387bb81841faf05dcc1a171eb97a Mon Sep 17 00:00:00 2001
+From: Philip Prindeville <philipp@redfish-solutions.com>
+Date: Sun, 1 Jan 2023 15:25:04 -0700
+Subject: [PATCH v3 1/1] x86: Support APU5 in PCEngines platform driver
+To: platform-driver-x86@vger.kernel.org, linux-x86_64@vger.kernel.org
+Cc: Ed Wildgoose <lists@wildgooses.com>, Andres Salomon <dilinger@queued.net>, Andreas Eberlein <foodeas@aeberlein.de>, Paul Spooren <paul@spooren.de>
+
+PCEngines make a number of SBC. APU5 has 5 mpcie slots + MSATA.
+It also has support for 3x LTE modems with 6x SIM slots (pairs with a
+SIM switch device). Each mpcie slot for modems has a reset GPIO
+
+To ensure that the naming is sane between APU2-6 the GPIOS are
+renamed to be modem1-reset, modem2-reset, etc. This is significant
+because the slots that can be reset change between APU2 and APU3/4
+
+GPIO for simswap is moved to the end of the list as it could be dropped
+for APU2 boards (but causes no harm to leave it in, hardware could be
+added to a future rev of the board).
+
+Structure of the GPIOs for APU5 is extremely similar to APU2-4, but
+many lines are moved around and there are simply more
+modems/resets/sim-swap lines to breakout.
+
+Also added APU6, which is essentially APU4 with a different ethernet
+interface and SFP cage on eth0.
+
+Revision history:
+
+v1: originally titled, "apu6: add apu6 variation to apu2 driver family"
+this dealt only with detecting the APUv6, which is otherwise identical
+to the v4 excepting the SFP cage on eth0.
+
+v2: at Ed's request, merged with his previous pull-request titled
+"x86: Support APU5 in PCEngines platform driver", and some cleanup
+to that changeset (including dropping the table "apu5_driver_data"
+which did not have a defined type "struct apu_driver_data"), but got
+mistitled when the Subject of that commit got accidentally dropped.
+
+v3: retitled to match Ed's previous pull-request.
+
+Cc: platform-driver-x86@vger.kernel.org
+Cc: linux-x86_64@vger.kernel.org
+Reviewed-by: Andreas Eberlein <foodeas@aeberlein.de>
+Reviewed-by: Paul Spooren <paul@spooren.de>
+Signed-off-by: Ed Wildgoose <lists@wildgooses.com>
+Sighed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
+---
+ drivers/leds/leds-apu.c | 2 +-
+ drivers/platform/x86/Kconfig | 4 +-
+ drivers/platform/x86/pcengines-apuv2.c | 118 ++++++++++++++++++++++---
+ 3 files changed, 107 insertions(+), 17 deletions(-)
+
+--- a/drivers/leds/leds-apu.c
++++ b/drivers/leds/leds-apu.c
+@@ -183,7 +183,7 @@ static int __init apu_led_init(void)
+
+ if (!(dmi_match(DMI_SYS_VENDOR, "PC Engines") &&
+ (dmi_match(DMI_PRODUCT_NAME, "APU") || dmi_match(DMI_PRODUCT_NAME, "apu1")))) {
+- pr_err("No PC Engines APUv1 board detected. For APUv2,3 support, enable CONFIG_PCENGINES_APU2\n");
++ pr_err("No PC Engines APUv1 board detected. For APUv2,3,4,5,6 support, enable CONFIG_PCENGINES_APU2\n");
+ return -ENODEV;
+ }
+
+--- a/drivers/platform/x86/Kconfig
++++ b/drivers/platform/x86/Kconfig
+@@ -698,7 +698,7 @@ config XO1_RFKILL
+ laptop.
+
+ config PCENGINES_APU2
+- tristate "PC Engines APUv2/3 front button and LEDs driver"
++ tristate "PC Engines APUv2/3/4/5/6 front button and LEDs driver"
+ depends on INPUT && INPUT_KEYBOARD && GPIOLIB
+ depends on LEDS_CLASS
+ select GPIO_AMD_FCH
+@@ -706,7 +706,7 @@ config PCENGINES_APU2
+ select LEDS_GPIO
+ help
+ This driver provides support for the front button and LEDs on
+- PC Engines APUv2/APUv3 board.
++ PC Engines APUv2/APUv3/APUv4/APUv5/APUv6 board.
+
+ To compile this driver as a module, choose M here: the module
+ will be called pcengines-apuv2.
+--- a/drivers/platform/x86/pcengines-apuv2.c
++++ b/drivers/platform/x86/pcengines-apuv2.c
+@@ -1,10 +1,12 @@
+ // SPDX-License-Identifier: GPL-2.0+
+
+ /*
+- * PC-Engines APUv2/APUv3 board platform driver
++ * PC-Engines APUv2-6 board platform driver
+ * for GPIO buttons and LEDs
+ *
+ * Copyright (C) 2018 metux IT consult
++ * Copyright (C) 2022 Ed Wildgoose <lists@wildgooses.com>
++ * Copyright (C) 2022 Philip Prindeville <philipp@redfish-solutions.com>
+ * Author: Enrico Weigelt <info@metux.net>
+ */
+
+@@ -22,38 +24,70 @@
+ #include <linux/platform_data/gpio/gpio-amd-fch.h>
+
+ /*
+- * NOTE: this driver only supports APUv2/3 - not APUv1, as this one
++ * NOTE: this driver only supports APUv2-6 - not APUv1, as this one
+ * has completely different register layouts.
+ */
+
++/*
++ * There are a number of APU variants, with differing features
++ * APU2 has SIM slots 1/2 mapping to mPCIe sockets 1/2
++ * APU3/4 moved SIM slot 1 to mPCIe socket 3, ie logically reversed
++ * However, most APU3/4 have a SIM switch which we default on to reverse
++ * the order and keep physical SIM order matching physical modem order
++ * APU6 is approximately the same as APU4 with different ethernet layout
++ *
++ * APU5 has 3x SIM sockets, all with a SIM switch
++ * several GPIOs are shuffled (see schematic), including MODESW
++ */
++
+ /* Register mappings */
+ #define APU2_GPIO_REG_LED1 AMD_FCH_GPIO_REG_GPIO57
+ #define APU2_GPIO_REG_LED2 AMD_FCH_GPIO_REG_GPIO58
+ #define APU2_GPIO_REG_LED3 AMD_FCH_GPIO_REG_GPIO59_DEVSLP1
+ #define APU2_GPIO_REG_MODESW AMD_FCH_GPIO_REG_GPIO32_GE1
+ #define APU2_GPIO_REG_SIMSWAP AMD_FCH_GPIO_REG_GPIO33_GE2
+-#define APU2_GPIO_REG_MPCIE2 AMD_FCH_GPIO_REG_GPIO55_DEVSLP0
+-#define APU2_GPIO_REG_MPCIE3 AMD_FCH_GPIO_REG_GPIO51
++#define APU2_GPIO_REG_RESETM1 AMD_FCH_GPIO_REG_GPIO51
++#define APU2_GPIO_REG_RESETM2 AMD_FCH_GPIO_REG_GPIO55_DEVSLP0
++
++#define APU5_GPIO_REG_MODESW AMT_FCH_GPIO_REG_GEVT22
++#define APU5_GPIO_REG_SIMSWAP1 AMD_FCH_GPIO_REG_GPIO68
++#define APU5_GPIO_REG_SIMSWAP2 AMD_FCH_GPIO_REG_GPIO32_GE1
++#define APU5_GPIO_REG_SIMSWAP3 AMD_FCH_GPIO_REG_GPIO33_GE2
++#define APU5_GPIO_REG_RESETM1 AMD_FCH_GPIO_REG_GPIO51
++#define APU5_GPIO_REG_RESETM2 AMD_FCH_GPIO_REG_GPIO55_DEVSLP0
++#define APU5_GPIO_REG_RESETM3 AMD_FCH_GPIO_REG_GPIO64
+
+ /* Order in which the GPIO lines are defined in the register list */
+ #define APU2_GPIO_LINE_LED1 0
+ #define APU2_GPIO_LINE_LED2 1
+ #define APU2_GPIO_LINE_LED3 2
+ #define APU2_GPIO_LINE_MODESW 3
+-#define APU2_GPIO_LINE_SIMSWAP 4
+-#define APU2_GPIO_LINE_MPCIE2 5
+-#define APU2_GPIO_LINE_MPCIE3 6
++#define APU2_GPIO_LINE_RESETM1 4
++#define APU2_GPIO_LINE_RESETM2 5
++#define APU2_GPIO_LINE_SIMSWAP 6
++
++#define APU5_GPIO_LINE_LED1 0
++#define APU5_GPIO_LINE_LED2 1
++#define APU5_GPIO_LINE_LED3 2
++#define APU5_GPIO_LINE_MODESW 3
++#define APU5_GPIO_LINE_RESETM1 4
++#define APU5_GPIO_LINE_RESETM2 5
++#define APU5_GPIO_LINE_RESETM3 6
++#define APU5_GPIO_LINE_SIMSWAP1 7
++#define APU5_GPIO_LINE_SIMSWAP2 8
++#define APU5_GPIO_LINE_SIMSWAP3 9
++
+
+-/* GPIO device */
++/* GPIO device - APU2/3/4/6 */
+
+ static int apu2_gpio_regs[] = {
+ [APU2_GPIO_LINE_LED1] = APU2_GPIO_REG_LED1,
+ [APU2_GPIO_LINE_LED2] = APU2_GPIO_REG_LED2,
+ [APU2_GPIO_LINE_LED3] = APU2_GPIO_REG_LED3,
+ [APU2_GPIO_LINE_MODESW] = APU2_GPIO_REG_MODESW,
++ [APU2_GPIO_LINE_RESETM1] = APU2_GPIO_REG_RESETM1,
++ [APU2_GPIO_LINE_RESETM2] = APU2_GPIO_REG_RESETM2,
+ [APU2_GPIO_LINE_SIMSWAP] = APU2_GPIO_REG_SIMSWAP,
+- [APU2_GPIO_LINE_MPCIE2] = APU2_GPIO_REG_MPCIE2,
+- [APU2_GPIO_LINE_MPCIE3] = APU2_GPIO_REG_MPCIE3,
+ };
+
+ static const char * const apu2_gpio_names[] = {
+@@ -61,9 +95,9 @@ static const char * const apu2_gpio_name
+ [APU2_GPIO_LINE_LED2] = "front-led2",
+ [APU2_GPIO_LINE_LED3] = "front-led3",
+ [APU2_GPIO_LINE_MODESW] = "front-button",
++ [APU2_GPIO_LINE_RESETM1] = "modem1-reset",
++ [APU2_GPIO_LINE_RESETM2] = "modem2-reset",
+ [APU2_GPIO_LINE_SIMSWAP] = "simswap",
+- [APU2_GPIO_LINE_MPCIE2] = "mpcie2_reset",
+- [APU2_GPIO_LINE_MPCIE3] = "mpcie3_reset",
+ };
+
+ static const struct amd_fch_gpio_pdata board_apu2 = {
+@@ -72,6 +106,40 @@ static const struct amd_fch_gpio_pdata b
+ .gpio_names = apu2_gpio_names,
+ };
+
++/* GPIO device - APU5 */
++
++static int apu5_gpio_regs[] = {
++ [APU5_GPIO_LINE_LED1] = APU2_GPIO_REG_LED1,
++ [APU5_GPIO_LINE_LED2] = APU2_GPIO_REG_LED2,
++ [APU5_GPIO_LINE_LED3] = APU2_GPIO_REG_LED3,
++ [APU5_GPIO_LINE_MODESW] = APU5_GPIO_REG_MODESW,
++ [APU5_GPIO_LINE_RESETM1] = APU5_GPIO_REG_RESETM1,
++ [APU5_GPIO_LINE_RESETM2] = APU5_GPIO_REG_RESETM2,
++ [APU5_GPIO_LINE_RESETM3] = APU5_GPIO_REG_RESETM3,
++ [APU5_GPIO_LINE_SIMSWAP1] = APU5_GPIO_REG_SIMSWAP1,
++ [APU5_GPIO_LINE_SIMSWAP2] = APU5_GPIO_REG_SIMSWAP2,
++ [APU5_GPIO_LINE_SIMSWAP3] = APU5_GPIO_REG_SIMSWAP3,
++};
++
++static const char * const apu5_gpio_names[] = {
++ [APU5_GPIO_LINE_LED1] = "front-led1",
++ [APU5_GPIO_LINE_LED2] = "front-led2",
++ [APU5_GPIO_LINE_LED3] = "front-led3",
++ [APU5_GPIO_LINE_MODESW] = "front-button",
++ [APU5_GPIO_LINE_RESETM1] = "modem1-reset",
++ [APU5_GPIO_LINE_RESETM2] = "modem2-reset",
++ [APU5_GPIO_LINE_RESETM3] = "modem3-reset",
++ [APU5_GPIO_LINE_SIMSWAP1] = "simswap1",
++ [APU5_GPIO_LINE_SIMSWAP2] = "simswap2",
++ [APU5_GPIO_LINE_SIMSWAP3] = "simswap3",
++};
++
++static const struct amd_fch_gpio_pdata board_apu5 = {
++ .gpio_num = ARRAY_SIZE(apu5_gpio_regs),
++ .gpio_reg = apu5_gpio_regs,
++ .gpio_names = apu5_gpio_names,
++};
++
+ /* GPIO LEDs device */
+
+ static const struct gpio_led apu2_leds[] = {
+@@ -215,6 +283,24 @@ static const struct dmi_system_id apu_gp
+ },
+ .driver_data = (void *)&board_apu2,
+ },
++ /* APU5 w/ mainline BIOS */
++ {
++ .ident = "apu5",
++ .matches = {
++ DMI_MATCH(DMI_SYS_VENDOR, "PC Engines"),
++ DMI_MATCH(DMI_BOARD_NAME, "apu5")
++ },
++ .driver_data = (void *)&board_apu5,
++ },
++ /* APU6 w/ mainline BIOS */
++ {
++ .ident = "apu6",
++ .matches = {
++ DMI_MATCH(DMI_SYS_VENDOR, "PC Engines"),
++ DMI_MATCH(DMI_BOARD_NAME, "apu6")
++ },
++ .driver_data = (void *)&board_apu2,
++ },
+ {}
+ };
+
+@@ -249,7 +335,7 @@ static int __init apu_board_init(void)
+
+ id = dmi_first_match(apu_gpio_dmi_table);
+ if (!id) {
+- pr_err("failed to detect APU board via DMI\n");
++ pr_err("No APU board detected via DMI\n");
+ return -ENODEV;
+ }
+
+@@ -288,8 +374,12 @@ module_init(apu_board_init);
+ module_exit(apu_board_exit);
+
+ MODULE_AUTHOR("Enrico Weigelt, metux IT consult <info@metux.net>");
+-MODULE_DESCRIPTION("PC Engines APUv2/APUv3 board GPIO/LEDs/keys driver");
++MODULE_DESCRIPTION("PC Engines APUv2-6 board GPIO/LEDs/keys driver");
+ MODULE_LICENSE("GPL");
+ MODULE_DEVICE_TABLE(dmi, apu_gpio_dmi_table);
+ MODULE_ALIAS("platform:pcengines-apuv2");
++MODULE_ALIAS("platform:pcengines-apuv3");
++MODULE_ALIAS("platform:pcengines-apuv4");
++MODULE_ALIAS("platform:pcengines-apuv5");
++MODULE_ALIAS("platform:pcengines-apuv6");
+ MODULE_SOFTDEP("pre: platform:" AMD_FCH_GPIO_DRIVER_NAME " platform:leds-gpio platform:gpio_keys_polled");
projects / openwrt / openwrt.git / commitdiff