adm5120: remove 3.6 support
authorGabor Juhos <juhosg@openwrt.org>
Sat, 12 Jan 2013 12:25:42 +0000 (12:25 +0000)
committerGabor Juhos <juhosg@openwrt.org>
Sat, 12 Jan 2013 12:25:42 +0000 (12:25 +0000)
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35116

18 files changed:
target/linux/adm5120/config-3.6 [deleted file]
target/linux/adm5120/patches-3.6/001-adm5120.patch [deleted file]
target/linux/adm5120/patches-3.6/002-adm5120_flash.patch [deleted file]
target/linux/adm5120/patches-3.6/003-adm5120_switch.patch [deleted file]
target/linux/adm5120/patches-3.6/005-adm5120_usb.patch [deleted file]
target/linux/adm5120/patches-3.6/007-adm5120_pci.patch [deleted file]
target/linux/adm5120/patches-3.6/009-adm5120_leds_switch_trigger.patch [deleted file]
target/linux/adm5120/patches-3.6/101-cfi_fixup_macronix_bootloc.patch [deleted file]
target/linux/adm5120/patches-3.6/102-jedec_pmc_39lvxxx_chips.patch [deleted file]
target/linux/adm5120/patches-3.6/103-mtd_trxsplit.patch [deleted file]
target/linux/adm5120/patches-3.6/120-rb153_cf_driver.patch [deleted file]
target/linux/adm5120/patches-3.6/200-amba_pl010_hacks.patch [deleted file]
target/linux/adm5120/patches-3.6/201-amba_bus_hacks.patch [deleted file]
target/linux/adm5120/patches-3.6/203-gpio_leds_brightness.patch [deleted file]
target/linux/adm5120/patches-3.6/310-adm5120_wdt.patch [deleted file]
target/linux/adm5120/rb1xx/config-3.6 [deleted file]
target/linux/adm5120/router_be/config-3.6 [deleted file]
target/linux/adm5120/router_le/config-3.6 [deleted file]

diff --git a/target/linux/adm5120/config-3.6 b/target/linux/adm5120/config-3.6
deleted file mode 100644 (file)
index 90c49ea..0000000
+++ /dev/null
@@ -1,198 +0,0 @@
-CONFIG_ADM5120=y
-CONFIG_ADM5120_ENET=y
-CONFIG_ADM5120_MACH_5GXI=y
-CONFIG_ADM5120_MACH_BR_6104K=y
-CONFIG_ADM5120_MACH_BR_6104KP=y
-CONFIG_ADM5120_MACH_BR_61X4WG=y
-CONFIG_ADM5120_MACH_CAS_771=y
-CONFIG_ADM5120_MACH_EASY5120P_ATA=y
-CONFIG_ADM5120_MACH_EASY5120_RT=y
-CONFIG_ADM5120_MACH_EASY5120_WVOIP=y
-CONFIG_ADM5120_MACH_EASY83000=y
-CONFIG_ADM5120_MACH_EB_214A=y
-CONFIG_ADM5120_MACH_NFS_101=y
-CONFIG_ADM5120_MACH_NP27G=y
-CONFIG_ADM5120_MACH_NP28G=y
-CONFIG_ADM5120_MACH_PMUGW=y
-# CONFIG_ADM5120_MACH_RB_11X is not set
-# CONFIG_ADM5120_MACH_RB_133 is not set
-# CONFIG_ADM5120_MACH_RB_133C is not set
-# CONFIG_ADM5120_MACH_RB_150 is not set
-# CONFIG_ADM5120_MACH_RB_153 is not set
-# CONFIG_ADM5120_MACH_RB_192 is not set
-CONFIG_ADM5120_MACH_WP54=y
-CONFIG_ADM5120_OEM_CELLVISION=y
-CONFIG_ADM5120_OEM_COMPEX=y
-CONFIG_ADM5120_OEM_EDIMAX=y
-CONFIG_ADM5120_OEM_GENERIC=y
-CONFIG_ADM5120_OEM_INFINEON=y
-# CONFIG_ADM5120_OEM_MIKROTIK is not set
-CONFIG_ADM5120_OEM_MOTOROLA=y
-CONFIG_ADM5120_OEM_OSBRIDGE=y
-# CONFIG_ADM5120_OEM_ZYXEL is not set
-CONFIG_ADM5120_SOC_BGA=y
-CONFIG_ADM5120_WDT=y
-CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y
-CONFIG_ARCH_DISCARD_MEMBLOCK=y
-CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y
-CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
-CONFIG_ARM_AMBA=y
-# CONFIG_ARM_SP805_WATCHDOG is not set
-CONFIG_ATA=m
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_CEVT_R4K=y
-CONFIG_CEVT_R4K_LIB=y
-CONFIG_CMDLINE="console=ttyAM0,115200 rootfstype=squashfs,jffs2"
-CONFIG_CMDLINE_BOOL=y
-# CONFIG_CMDLINE_OVERRIDE is not set
-# CONFIG_CPU_BIG_ENDIAN is not set
-CONFIG_CPU_HAS_PREFETCH=y
-CONFIG_CPU_HAS_SYNC=y
-CONFIG_CPU_LITTLE_ENDIAN=y
-CONFIG_CPU_MIPS32=y
-CONFIG_CPU_MIPS32_R1=y
-CONFIG_CPU_MIPSR1=y
-CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_HIGHMEM=y
-CONFIG_CRYPTO=m
-CONFIG_CRYPTO_AEAD2=m
-CONFIG_CRYPTO_AES=m
-CONFIG_CRYPTO_ALGAPI=m
-CONFIG_CRYPTO_ALGAPI2=m
-CONFIG_CRYPTO_ARC4=m
-CONFIG_CRYPTO_BLKCIPHER=m
-CONFIG_CRYPTO_BLKCIPHER2=m
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_HASH=m
-CONFIG_CRYPTO_HASH2=m
-CONFIG_CRYPTO_MANAGER=m
-CONFIG_CRYPTO_MANAGER2=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_PCOMP2=m
-CONFIG_CRYPTO_RNG2=m
-CONFIG_CRYPTO_WORKQUEUE=m
-CONFIG_CSRC_R4K=y
-CONFIG_CSRC_R4K_LIB=y
-CONFIG_DECOMPRESS_LZMA=y
-CONFIG_DMA_NONCOHERENT=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_GENERIC_ATOMIC64=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_IO=y
-CONFIG_GENERIC_IRQ_SHOW=y
-CONFIG_GENERIC_PCI_IOMAP=y
-CONFIG_GENERIC_SMP_IDLE_THREAD=y
-CONFIG_GPIOLIB=y
-CONFIG_GPIO_SYSFS=y
-CONFIG_HARDWARE_WATCHPOINTS=y
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAVE_ARCH_JUMP_LABEL=y
-CONFIG_HAVE_ARCH_KGDB=y
-CONFIG_HAVE_CLK=y
-CONFIG_HAVE_C_RECORDMCOUNT=y
-CONFIG_HAVE_DMA_API_DEBUG=y
-CONFIG_HAVE_DMA_ATTRS=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_HAVE_GENERIC_HARDIRQS=y
-CONFIG_HAVE_IDE=y
-CONFIG_HAVE_IRQ_WORK=y
-CONFIG_HAVE_MEMBLOCK=y
-CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_PERF_EVENTS=y
-CONFIG_HID=m
-CONFIG_HOSTAP=m
-CONFIG_HOSTAP_FIRMWARE=y
-# CONFIG_HOSTAP_FIRMWARE_NVRAM is not set
-CONFIG_HOSTAP_PCI=m
-CONFIG_HW_HAS_PCI=y
-CONFIG_HW_RANDOM=y
-CONFIG_HZ=250
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_IMAGE_CMDLINE_HACK=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_INPUT=m
-# CONFIG_IP_MROUTE_MULTIPLE_TABLES is not set
-CONFIG_IRQ_CPU=y
-CONFIG_IRQ_FORCED_THREADING=y
-# CONFIG_LEDS_TRIGGER_ADM5120_SWITCH is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-CONFIG_LIB80211=m
-CONFIG_LIB80211_CRYPT_CCMP=m
-CONFIG_LIB80211_CRYPT_TKIP=m
-CONFIG_LIB80211_CRYPT_WEP=m
-CONFIG_MII=m
-CONFIG_MIPS=y
-CONFIG_MIPS_L1_CACHE_SHIFT=5
-CONFIG_MIPS_MACHINE=y
-CONFIG_MIPS_MT_DISABLED=y
-CONFIG_MTD_ADM5120=y
-CONFIG_MTD_CFI_FIXUP_MACRONIX_BOOTLOC=y
-# CONFIG_MTD_CFI_INTELEXT is not set
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_MYLOADER_PARTS=y
-CONFIG_MTD_TRXSPLIT=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_NEED_PER_CPU_KM=y
-CONFIG_NLS=m
-CONFIG_NO_EXCEPT_FILL=y
-CONFIG_NO_GENERIC_PCI_IOPORT_MAP=y
-CONFIG_NO_HZ=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_PCI=y
-CONFIG_PCI_DISABLE_COMMON_QUIRKS=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PERF_USE_VMALLOC=y
-# CONFIG_PREEMPT_RCU is not set
-CONFIG_SCSI=m
-CONFIG_SCSI_MOD=m
-# CONFIG_SERIAL_8250 is not set
-CONFIG_SERIAL_AMBA_PL010=y
-CONFIG_SERIAL_AMBA_PL010_CONSOLE=y
-CONFIG_SERIAL_AMBA_PL010_NUMPORTS=2
-# CONFIG_SERIAL_AMBA_PL011 is not set
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-CONFIG_SOFT_WATCHDOG=m
-# CONFIG_SWAP is not set
-CONFIG_SYS_HAS_CPU_MIPS32_R1=y
-CONFIG_SYS_HAS_EARLY_PRINTK=y
-CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
-CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
-CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
-CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
-CONFIG_USB=m
-CONFIG_USB_ADM5120_HCD=m
-CONFIG_USB_ARCH_HAS_XHCI=y
-CONFIG_USB_COMMON=m
-CONFIG_USB_EHCI_HCD=m
-# CONFIG_USB_EHCI_HCD_PLATFORM is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_HCD=m
-# CONFIG_USB_OHCI_HCD_PLATFORM is not set
-CONFIG_USB_SUPPORT=y
-# CONFIG_USB_UHCI_HCD is not set
-CONFIG_WATCHDOG_CORE=y
-CONFIG_ZONE_DMA_FLAG=0
diff --git a/target/linux/adm5120/patches-3.6/001-adm5120.patch b/target/linux/adm5120/patches-3.6/001-adm5120.patch
deleted file mode 100644 (file)
index 1ec43b4..0000000
+++ /dev/null
@@ -1,44 +0,0 @@
---- a/arch/mips/Kconfig
-+++ b/arch/mips/Kconfig
-@@ -46,6 +46,24 @@ choice
-       prompt "System type"
-       default SGI_IP22
-+config ADM5120
-+      bool "Infineon/ADMtek ADM5120 SoC based machines"
-+      select BOOT_RAW
-+      select NO_EXCEPT_FILL
-+      select CEVT_R4K
-+      select CSRC_R4K
-+      select SYS_HAS_CPU_MIPS32_R1
-+      select SYS_HAS_EARLY_PRINTK
-+      select DMA_NONCOHERENT
-+      select IRQ_CPU
-+      select SYS_SUPPORTS_LITTLE_ENDIAN
-+      select SYS_SUPPORTS_BIG_ENDIAN
-+      select SYS_SUPPORTS_32BIT_KERNEL
-+      select ARCH_REQUIRE_GPIOLIB
-+      select SWAP_IO_SPACE if CPU_BIG_ENDIAN
-+      select MIPS_MACHINE
-+      select HAVE_CLK
-+
- config MIPS_ALCHEMY
-       bool "Alchemy processor based machines"
-       select 64BIT_PHYS_ADDR
-@@ -837,6 +855,7 @@ config NLM_XLP_BOARD
- endchoice
-+source "arch/mips/adm5120/Kconfig"
- source "arch/mips/alchemy/Kconfig"
- source "arch/mips/ath79/Kconfig"
- source "arch/mips/bcm47xx/Kconfig"
---- a/arch/mips/Kbuild.platforms
-+++ b/arch/mips/Kbuild.platforms
-@@ -1,5 +1,6 @@
- # All platforms listed in alphabetic order
-+platforms += adm5120
- platforms += alchemy
- platforms += ar7
- platforms += ath79
diff --git a/target/linux/adm5120/patches-3.6/002-adm5120_flash.patch b/target/linux/adm5120/patches-3.6/002-adm5120_flash.patch
deleted file mode 100644 (file)
index ab853bd..0000000
+++ /dev/null
@@ -1,21 +0,0 @@
---- a/drivers/mtd/maps/Kconfig
-+++ b/drivers/mtd/maps/Kconfig
-@@ -527,4 +527,8 @@ config MTD_LATCH_ADDR
-           If compiled as a module, it will be called latch-addr-flash.
-+config MTD_ADM5120
-+      tristate "Map driver for ADM5120 based boards"
-+      depends on ADM5120
-+
- endmenu
---- a/drivers/mtd/maps/Makefile
-+++ b/drivers/mtd/maps/Makefile
-@@ -38,6 +38,7 @@ obj-$(CONFIG_MTD_SCx200_DOCFLASH)+= scx2
- obj-$(CONFIG_MTD_DBOX2)               += dbox2-flash.o
- obj-$(CONFIG_MTD_SOLUTIONENGINE)+= solutionengine.o
- obj-$(CONFIG_MTD_PCI)         += pci.o
-+obj-$(CONFIG_MTD_ADM5120)     += adm5120-flash.o
- obj-$(CONFIG_MTD_AUTCPU12)    += autcpu12-nvram.o
- obj-$(CONFIG_MTD_IMPA7)               += impa7.o
- obj-$(CONFIG_MTD_FORTUNET)    += fortunet.o
diff --git a/target/linux/adm5120/patches-3.6/003-adm5120_switch.patch b/target/linux/adm5120/patches-3.6/003-adm5120_switch.patch
deleted file mode 100644 (file)
index c2f534b..0000000
+++ /dev/null
@@ -1,23 +0,0 @@
---- a/drivers/net/Kconfig
-+++ b/drivers/net/Kconfig
-@@ -244,6 +244,10 @@ source "drivers/net/dsa/Kconfig"
- source "drivers/net/ethernet/Kconfig"
-+config ADM5120_ENET
-+      tristate "ADM5120 Ethernet switch support"
-+      depends on ADM5120
-+
- source "drivers/net/fddi/Kconfig"
- source "drivers/net/hippi/Kconfig"
---- a/drivers/net/Makefile
-+++ b/drivers/net/Makefile
-@@ -32,6 +32,7 @@ obj-$(CONFIG_CAN) += can/
- obj-$(CONFIG_ETRAX_ETHERNET) += cris/
- obj-$(CONFIG_NET_DSA) += dsa/
- obj-$(CONFIG_ETHERNET) += ethernet/
-+obj-$(CONFIG_ADM5120_ENET) += adm5120sw.o
- obj-$(CONFIG_FDDI) += fddi/
- obj-$(CONFIG_HIPPI) += hippi/
- obj-$(CONFIG_HAMRADIO) += hamradio/
diff --git a/target/linux/adm5120/patches-3.6/005-adm5120_usb.patch b/target/linux/adm5120/patches-3.6/005-adm5120_usb.patch
deleted file mode 100644 (file)
index 54a3cc8..0000000
+++ /dev/null
@@ -1,33 +0,0 @@
---- a/drivers/usb/Makefile
-+++ b/drivers/usb/Makefile
-@@ -13,6 +13,7 @@ obj-$(CONFIG_USB_DWC3)               += dwc3/
- obj-$(CONFIG_USB_MON)         += mon/
- obj-$(CONFIG_PCI)             += host/
-+obj-$(CONFIG_USB_ADM5120_HCD) += host/
- obj-$(CONFIG_USB_EHCI_HCD)    += host/
- obj-$(CONFIG_USB_ISP116X_HCD) += host/
- obj-$(CONFIG_USB_OHCI_HCD)    += host/
---- a/drivers/usb/host/Kconfig
-+++ b/drivers/usb/host/Kconfig
-@@ -4,6 +4,10 @@
- comment "USB Host Controller Drivers"
-       depends on USB
-+config USB_ADM5120_HCD
-+      tristate "ADM5120 HCD support (EXPERIMENTAL)"
-+      depends on USB && ADM5120 && EXPERIMENTAL
-+
- config USB_C67X00_HCD
-       tristate "Cypress C67x00 HCD support"
-       depends on USB
---- a/drivers/usb/host/Makefile
-+++ b/drivers/usb/host/Makefile
-@@ -23,6 +23,7 @@ obj-$(CONFIG_USB_WHCI_HCD)   += whci/
- obj-$(CONFIG_PCI)             += pci-quirks.o
-+obj-$(CONFIG_USB_ADM5120_HCD) += adm5120-hcd.o
- obj-$(CONFIG_USB_EHCI_HCD)    += ehci-hcd.o
- obj-$(CONFIG_USB_OXU210HP_HCD)        += oxu210hp-hcd.o
- obj-$(CONFIG_USB_ISP116X_HCD) += isp116x-hcd.o
diff --git a/target/linux/adm5120/patches-3.6/007-adm5120_pci.patch b/target/linux/adm5120/patches-3.6/007-adm5120_pci.patch
deleted file mode 100644 (file)
index 151e289..0000000
+++ /dev/null
@@ -1,22 +0,0 @@
---- a/arch/mips/pci/Makefile
-+++ b/arch/mips/pci/Makefile
-@@ -18,6 +18,7 @@ obj-$(CONFIG_PCI_TX4927)     += ops-tx4927.o
- obj-$(CONFIG_BCM47XX)         += pci-bcm47xx.o
- obj-$(CONFIG_BCM63XX)         += pci-bcm63xx.o fixup-bcm63xx.o \
-                                       ops-bcm63xx.o
-+obj-$(CONFIG_ADM5120)         += pci-adm5120.o
- obj-$(CONFIG_MIPS_ALCHEMY)    += pci-alchemy.o
- obj-$(CONFIG_SOC_AR71XX)      += pci-ar71xx.o
- obj-$(CONFIG_PCI_AR724X)      += pci-ar724x.o
---- a/include/linux/pci_ids.h
-+++ b/include/linux/pci_ids.h
-@@ -1804,6 +1804,9 @@
- #define PCI_VENDOR_ID_ESDGMBH         0x12fe
- #define PCI_DEVICE_ID_ESDGMBH_CPCIASIO4 0x0111
-+#define PCI_VENDOR_ID_ADMTEK          0x1317
-+#define PCI_DEVICE_ID_ADMTEK_ADM5120  0x5120
-+
- #define PCI_VENDOR_ID_SIIG            0x131f
- #define PCI_SUBVENDOR_ID_SIIG         0x131f
- #define PCI_DEVICE_ID_SIIG_1S_10x_550 0x1000
diff --git a/target/linux/adm5120/patches-3.6/009-adm5120_leds_switch_trigger.patch b/target/linux/adm5120/patches-3.6/009-adm5120_leds_switch_trigger.patch
deleted file mode 100644 (file)
index c89e326..0000000
+++ /dev/null
@@ -1,22 +0,0 @@
---- a/drivers/leds/Kconfig
-+++ b/drivers/leds/Kconfig
-@@ -555,4 +555,12 @@ config LEDS_TRIGGER_USBDEV
-         This allows LEDs to be controlled by the presence/activity of
-         an USB device. If unsure, say N.
-+config LEDS_TRIGGER_ADM5120_SWITCH
-+      tristate "LED ADM5120 Switch Port Status Trigger"
-+      depends on LEDS_TRIGGERS && ADM5120
-+      help
-+        This allows LEDs to be controlled by the port states of
-+        the ADM5120 built-in Ethernet Switch
-+        If unsure, say N.
-+
- endif # NEW_LEDS
---- a/drivers/leds/Makefile
-+++ b/drivers/leds/Makefile
-@@ -66,3 +66,4 @@ obj-$(CONFIG_LEDS_TRIGGER_TRANSIENT) +=
- obj-$(CONFIG_LEDS_TRIGGER_MORSE)      += ledtrig-morse.o
- obj-$(CONFIG_LEDS_TRIGGER_NETDEV)     += ledtrig-netdev.o
- obj-$(CONFIG_LEDS_TRIGGER_USBDEV)     += ledtrig-usbdev.o
-+obj-$(CONFIG_LEDS_TRIGGER_ADM5120_SWITCH) += ledtrig-adm5120-switch.o
diff --git a/target/linux/adm5120/patches-3.6/101-cfi_fixup_macronix_bootloc.patch b/target/linux/adm5120/patches-3.6/101-cfi_fixup_macronix_bootloc.patch
deleted file mode 100644 (file)
index 0d1f927..0000000
+++ /dev/null
@@ -1,84 +0,0 @@
---- a/drivers/mtd/chips/cfi_cmdset_0002.c
-+++ b/drivers/mtd/chips/cfi_cmdset_0002.c
-@@ -48,6 +48,12 @@
- #define SST49LF008A           0x005a
- #define AT49BV6416            0x00d6
-+/* Macronix */
-+#define MX29LV160B    0x2249  /* MX29LV160 Bottom-boot chip */
-+#define MX29LV160T    0x22C4  /* MX29LV160 Top-boot chip */
-+#define MX29LV320B    0x22A8  /* MX29LV320 Bottom-boot chip */
-+#define MX29LV320T    0x22A7  /* MX29LV320 Top-boot chip */
-+
- static int cfi_amdstd_read (struct mtd_info *, loff_t, size_t, size_t *, u_char *);
- static int cfi_amdstd_write_words(struct mtd_info *, loff_t, size_t, size_t *, const u_char *);
- static int cfi_amdstd_write_buffers(struct mtd_info *, loff_t, size_t, size_t *, const u_char *);
-@@ -358,6 +364,41 @@ static struct cfi_fixup cfi_nopri_fixup_
-       { 0, 0, NULL }
- };
-+#ifdef CONFIG_MTD_CFI_FIXUP_MACRONIX_BOOTLOC
-+/*
-+ * Some Macronix chips has no/bad bootblock information in the CFI table
-+ */
-+static void fixup_macronix_bootloc(struct mtd_info *mtd)
-+{
-+      struct map_info *map = mtd->priv;
-+      struct cfi_private *cfi = map->fldrv_priv;
-+      struct cfi_pri_amdstd *extp = cfi->cmdset_priv;
-+      __u8 t;
-+
-+      switch (cfi->id) {
-+      /* TODO: put affected chip ids here */
-+      case MX29LV160B:
-+      case MX29LV320B:
-+              t = 2;  /* Bottom boot */
-+              break;
-+      case MX29LV160T:
-+      case MX29LV320T:
-+              t = 3;  /* Top boot */
-+              break;
-+      default:
-+              return;
-+      }
-+
-+      if (extp->TopBottom == t)
-+              /* boot location detected by the CFI layer is correct */
-+              return;
-+
-+      extp->TopBottom = t;
-+      printk("%s: Macronix chip detected, id:0x%04X, boot location forced "
-+              "to %s\n", map->name, cfi->id, (t == 2) ? "bottom" : "top");
-+}
-+#endif /* CONFIG_MTD_CFI_FIXUP_MACRONIX_BOOTLOC */
-+
- static struct cfi_fixup cfi_fixup_table[] = {
-       { CFI_MFR_ATMEL, CFI_ID_ANY, fixup_convert_atmel_pri },
- #ifdef AMD_BOOTLOC_BUG
-@@ -400,6 +441,9 @@ static struct cfi_fixup fixup_table[] =
-        */
-       { CFI_MFR_ANY, CFI_ID_ANY, fixup_use_erase_chip },
-       { CFI_MFR_ATMEL, AT49BV6416, fixup_use_atmel_lock },
-+#ifdef CONFIG_MTD_CFI_FIXUP_MACRONIX_BOOTLOC
-+      { CFI_MFR_MACRONIX, CFI_ID_ANY, fixup_macronix_bootloc },
-+#endif
-       { 0, 0, NULL }
- };
---- a/drivers/mtd/chips/Kconfig
-+++ b/drivers/mtd/chips/Kconfig
-@@ -196,6 +196,14 @@ config MTD_CFI_AMDSTD
-         provides support for one of those command sets, used on chips
-         including the AMD Am29LV320.
-+config MTD_CFI_FIXUP_MACRONIX_BOOTLOC
-+      bool "Fix boot-block location for Macronix flash chips"
-+      depends on MTD_CFI_AMDSTD
-+      help
-+        Some Macronix flash chips have no/wrong boot-block location in the
-+        CFI table, and the driver may detect the type incorrectly. Select
-+        this if your board has such chip.
-+
- config MTD_CFI_STAA
-       tristate "Support for ST (Advanced Architecture) flash chips"
-       depends on MTD_GEN_PROBE
diff --git a/target/linux/adm5120/patches-3.6/102-jedec_pmc_39lvxxx_chips.patch b/target/linux/adm5120/patches-3.6/102-jedec_pmc_39lvxxx_chips.patch
deleted file mode 100644 (file)
index 00148fa..0000000
+++ /dev/null
@@ -1,68 +0,0 @@
---- a/drivers/mtd/chips/jedec_probe.c
-+++ b/drivers/mtd/chips/jedec_probe.c
-@@ -115,6 +115,10 @@
- #define UPD29F064115  0x221C
- /* PMC */
-+#define PM39LV512     0x001B
-+#define PM39LV010     0x001C
-+#define PM39LV020     0x003D
-+#define PM39LV040     0x003E
- #define PM49FL002     0x006D
- #define PM49FL004     0x006E
- #define PM49FL008     0x006A
-@@ -1259,6 +1263,54 @@ static const struct amd_flash_info jedec
-                       ERASEINFO(0x02000,2),
-                       ERASEINFO(0x04000,1),
-               }
-+        }, {
-+              .mfr_id         = CFI_MFR_PMC,
-+              .dev_id         = PM39LV512,
-+              .name           = "PMC Pm39LV512",
-+              .devtypes       = CFI_DEVICETYPE_X8,
-+              .uaddr          = MTD_UADDR_0x0555_0x02AA,
-+              .dev_size       = SIZE_64KiB,
-+              .cmd_set        = P_ID_AMD_STD,
-+              .nr_regions     = 1,
-+              .regions        = {
-+                      ERASEINFO(0x01000,16),
-+              }
-+        }, {
-+              .mfr_id         = CFI_MFR_PMC,
-+              .dev_id         = PM39LV010,
-+              .name           = "PMC Pm39LV010",
-+              .devtypes       = CFI_DEVICETYPE_X8,
-+              .uaddr          = MTD_UADDR_0x0555_0x02AA,
-+              .dev_size       = SIZE_128KiB,
-+              .cmd_set        = P_ID_AMD_STD,
-+              .nr_regions     = 1,
-+              .regions        = {
-+                      ERASEINFO(0x01000,32),
-+              }
-+        }, {
-+              .mfr_id         = CFI_MFR_PMC,
-+              .dev_id         = PM39LV020,
-+              .name           = "PMC Pm39LV020",
-+              .devtypes       = CFI_DEVICETYPE_X8,
-+              .uaddr          = MTD_UADDR_0x0555_0x02AA,
-+              .dev_size       = SIZE_256KiB,
-+              .cmd_set        = P_ID_AMD_STD,
-+              .nr_regions     = 1,
-+              .regions        = {
-+                      ERASEINFO(0x01000,64),
-+              }
-+        }, {
-+              .mfr_id         = CFI_MFR_PMC,
-+              .dev_id         = PM39LV040,
-+              .name           = "PMC Pm39LV040",
-+              .devtypes       = CFI_DEVICETYPE_X8,
-+              .uaddr          = MTD_UADDR_0x0555_0x02AA,
-+              .dev_size       = SIZE_512KiB,
-+              .cmd_set        = P_ID_AMD_STD,
-+              .nr_regions     = 1,
-+              .regions        = {
-+                      ERASEINFO(0x01000,128),
-+              }
-       }, {
-               .mfr_id         = CFI_MFR_PMC,
-               .dev_id         = PM49FL002,
diff --git a/target/linux/adm5120/patches-3.6/103-mtd_trxsplit.patch b/target/linux/adm5120/patches-3.6/103-mtd_trxsplit.patch
deleted file mode 100644 (file)
index 421dcaa..0000000
+++ /dev/null
@@ -1,23 +0,0 @@
---- a/drivers/mtd/Kconfig
-+++ b/drivers/mtd/Kconfig
-@@ -31,6 +31,10 @@ config MTD_ROOTFS_SPLIT
-       bool "Automatically split 'rootfs' partition for squashfs"
-       default y
-+config MTD_TRXSPLIT
-+      bool "Automatically find and split TRX partitions"
-+      default n
-+
- config MTD_REDBOOT_PARTS
-       tristate "RedBoot partition table parsing"
-       ---help---
---- a/drivers/mtd/Makefile
-+++ b/drivers/mtd/Makefile
-@@ -13,6 +13,7 @@ obj-$(CONFIG_MTD_AFS_PARTS)  += afs.o
- obj-$(CONFIG_MTD_AR7_PARTS)   += ar7part.o
- obj-$(CONFIG_MTD_BCM63XX_PARTS)       += bcm63xxpart.o
- obj-$(CONFIG_MTD_MYLOADER_PARTS) += myloader.o
-+obj-$(CONFIG_MTD_TRXSPLIT)    += trxsplit.o
- # 'Users' - code which presents functionality to userspace.
- obj-$(CONFIG_MTD_CHAR)                += mtdchar.o
diff --git a/target/linux/adm5120/patches-3.6/120-rb153_cf_driver.patch b/target/linux/adm5120/patches-3.6/120-rb153_cf_driver.patch
deleted file mode 100644 (file)
index 2db2c67..0000000
+++ /dev/null
@@ -1,28 +0,0 @@
---- a/drivers/ata/Makefile
-+++ b/drivers/ata/Makefile
-@@ -89,6 +89,7 @@ obj-$(CONFIG_PATA_PCMCIA)    += pata_pcmcia
- obj-$(CONFIG_PATA_PALMLD)     += pata_palmld.o
- obj-$(CONFIG_PATA_PLATFORM)   += pata_platform.o
- obj-$(CONFIG_PATA_OF_PLATFORM)        += pata_of_platform.o
-+obj-$(CONFIG_PATA_RB153_CF)   += pata_rb153_cf.o
- obj-$(CONFIG_PATA_RB532)      += pata_rb532_cf.o
- obj-$(CONFIG_PATA_RZ1000)     += pata_rz1000.o
- obj-$(CONFIG_PATA_SAMSUNG_CF) += pata_samsung_cf.o
---- a/drivers/ata/Kconfig
-+++ b/drivers/ata/Kconfig
-@@ -844,6 +844,15 @@ config PATA_QDI
-       help
-         Support for QDI 6500 and 6580 PATA controllers on VESA local bus.
-+config PATA_RB153_CF
-+      tristate "RouterBOARD 153 Compact Flash support"
-+      depends on ADM5120_MACH_RB_153
-+      help
-+        This option enables support for a Compact Flash connected on
-+        the RouterBOARD 153.
-+
-+        If unsure, say N.
-+
- config PATA_RB532
-       tristate "RouterBoard 532 PATA CompactFlash support"
-       depends on MIKROTIK_RB532
diff --git a/target/linux/adm5120/patches-3.6/200-amba_pl010_hacks.patch b/target/linux/adm5120/patches-3.6/200-amba_pl010_hacks.patch
deleted file mode 100644 (file)
index 64e7d2a..0000000
+++ /dev/null
@@ -1,355 +0,0 @@
---- a/drivers/tty/serial/amba-pl010.c
-+++ b/drivers/tty/serial/amba-pl010.c
-@@ -49,11 +49,9 @@
- #include <asm/io.h>
--#define UART_NR               8
--
- #define SERIAL_AMBA_MAJOR     204
- #define SERIAL_AMBA_MINOR     16
--#define SERIAL_AMBA_NR                UART_NR
-+#define SERIAL_AMBA_NR                CONFIG_SERIAL_AMBA_PL010_NUMPORTS
- #define AMBA_ISR_PASS_LIMIT   256
-@@ -79,9 +77,9 @@ static void pl010_stop_tx(struct uart_po
-       struct uart_amba_port *uap = (struct uart_amba_port *)port;
-       unsigned int cr;
--      cr = readb(uap->port.membase + UART010_CR);
-+      cr = __raw_readl(uap->port.membase + UART010_CR);
-       cr &= ~UART010_CR_TIE;
--      writel(cr, uap->port.membase + UART010_CR);
-+      __raw_writel(cr, uap->port.membase + UART010_CR);
- }
- static void pl010_start_tx(struct uart_port *port)
-@@ -89,9 +87,9 @@ static void pl010_start_tx(struct uart_p
-       struct uart_amba_port *uap = (struct uart_amba_port *)port;
-       unsigned int cr;
--      cr = readb(uap->port.membase + UART010_CR);
-+      cr = __raw_readl(uap->port.membase + UART010_CR);
-       cr |= UART010_CR_TIE;
--      writel(cr, uap->port.membase + UART010_CR);
-+      __raw_writel(cr, uap->port.membase + UART010_CR);
- }
- static void pl010_stop_rx(struct uart_port *port)
-@@ -99,9 +97,9 @@ static void pl010_stop_rx(struct uart_po
-       struct uart_amba_port *uap = (struct uart_amba_port *)port;
-       unsigned int cr;
--      cr = readb(uap->port.membase + UART010_CR);
-+      cr = __raw_readl(uap->port.membase + UART010_CR);
-       cr &= ~(UART010_CR_RIE | UART010_CR_RTIE);
--      writel(cr, uap->port.membase + UART010_CR);
-+      __raw_writel(cr, uap->port.membase + UART010_CR);
- }
- static void pl010_enable_ms(struct uart_port *port)
-@@ -109,9 +107,9 @@ static void pl010_enable_ms(struct uart_
-       struct uart_amba_port *uap = (struct uart_amba_port *)port;
-       unsigned int cr;
--      cr = readb(uap->port.membase + UART010_CR);
-+      cr = __raw_readl(uap->port.membase + UART010_CR);
-       cr |= UART010_CR_MSIE;
--      writel(cr, uap->port.membase + UART010_CR);
-+      __raw_writel(cr, uap->port.membase + UART010_CR);
- }
- static void pl010_rx_chars(struct uart_amba_port *uap)
-@@ -119,9 +117,9 @@ static void pl010_rx_chars(struct uart_a
-       struct tty_struct *tty = uap->port.state->port.tty;
-       unsigned int status, ch, flag, rsr, max_count = 256;
--      status = readb(uap->port.membase + UART01x_FR);
-+      status = __raw_readl(uap->port.membase + UART01x_FR);
-       while (UART_RX_DATA(status) && max_count--) {
--              ch = readb(uap->port.membase + UART01x_DR);
-+              ch = __raw_readl(uap->port.membase + UART01x_DR);
-               flag = TTY_NORMAL;
-               uap->port.icount.rx++;
-@@ -130,9 +128,9 @@ static void pl010_rx_chars(struct uart_a
-                * Note that the error handling code is
-                * out of the main execution path
-                */
--              rsr = readb(uap->port.membase + UART01x_RSR) | UART_DUMMY_RSR_RX;
-+              rsr = __raw_readl(uap->port.membase + UART01x_RSR) | UART_DUMMY_RSR_RX;
-               if (unlikely(rsr & UART01x_RSR_ANY)) {
--                      writel(0, uap->port.membase + UART01x_ECR);
-+                      __raw_writel(0, uap->port.membase + UART01x_ECR);
-                       if (rsr & UART01x_RSR_BE) {
-                               rsr &= ~(UART01x_RSR_FE | UART01x_RSR_PE);
-@@ -162,7 +160,7 @@ static void pl010_rx_chars(struct uart_a
-               uart_insert_char(&uap->port, rsr, UART01x_RSR_OE, ch, flag);
-       ignore_char:
--              status = readb(uap->port.membase + UART01x_FR);
-+              status = __raw_readl(uap->port.membase + UART01x_FR);
-       }
-       spin_unlock(&uap->port.lock);
-       tty_flip_buffer_push(tty);
-@@ -175,7 +173,7 @@ static void pl010_tx_chars(struct uart_a
-       int count;
-       if (uap->port.x_char) {
--              writel(uap->port.x_char, uap->port.membase + UART01x_DR);
-+              __raw_writel(uap->port.x_char, uap->port.membase + UART01x_DR);
-               uap->port.icount.tx++;
-               uap->port.x_char = 0;
-               return;
-@@ -187,7 +185,7 @@ static void pl010_tx_chars(struct uart_a
-       count = uap->port.fifosize >> 1;
-       do {
--              writel(xmit->buf[xmit->tail], uap->port.membase + UART01x_DR);
-+              __raw_writel(xmit->buf[xmit->tail], uap->port.membase + UART01x_DR);
-               xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
-               uap->port.icount.tx++;
-               if (uart_circ_empty(xmit))
-@@ -205,9 +203,9 @@ static void pl010_modem_status(struct ua
- {
-       unsigned int status, delta;
--      writel(0, uap->port.membase + UART010_ICR);
-+      __raw_writel(0, uap->port.membase + UART010_ICR);
--      status = readb(uap->port.membase + UART01x_FR) & UART01x_FR_MODEM_ANY;
-+      status = __raw_readl(uap->port.membase + UART01x_FR) & UART01x_FR_MODEM_ANY;
-       delta = status ^ uap->old_status;
-       uap->old_status = status;
-@@ -235,7 +233,7 @@ static irqreturn_t pl010_int(int irq, vo
-       spin_lock(&uap->port.lock);
--      status = readb(uap->port.membase + UART010_IIR);
-+      status = __raw_readl(uap->port.membase + UART010_IIR);
-       if (status) {
-               do {
-                       if (status & (UART010_IIR_RTIS | UART010_IIR_RIS))
-@@ -248,7 +246,7 @@ static irqreturn_t pl010_int(int irq, vo
-                       if (pass_counter-- == 0)
-                               break;
--                      status = readb(uap->port.membase + UART010_IIR);
-+                      status = __raw_readl(uap->port.membase + UART010_IIR);
-               } while (status & (UART010_IIR_RTIS | UART010_IIR_RIS |
-                                  UART010_IIR_TIS));
-               handled = 1;
-@@ -262,7 +260,7 @@ static irqreturn_t pl010_int(int irq, vo
- static unsigned int pl010_tx_empty(struct uart_port *port)
- {
-       struct uart_amba_port *uap = (struct uart_amba_port *)port;
--      unsigned int status = readb(uap->port.membase + UART01x_FR);
-+      unsigned int status = __raw_readl(uap->port.membase + UART01x_FR);
-       return status & UART01x_FR_BUSY ? 0 : TIOCSER_TEMT;
- }
-@@ -272,7 +270,7 @@ static unsigned int pl010_get_mctrl(stru
-       unsigned int result = 0;
-       unsigned int status;
--      status = readb(uap->port.membase + UART01x_FR);
-+      status = __raw_readl(uap->port.membase + UART01x_FR);
-       if (status & UART01x_FR_DCD)
-               result |= TIOCM_CAR;
-       if (status & UART01x_FR_DSR)
-@@ -298,12 +296,12 @@ static void pl010_break_ctl(struct uart_
-       unsigned int lcr_h;
-       spin_lock_irqsave(&uap->port.lock, flags);
--      lcr_h = readb(uap->port.membase + UART010_LCRH);
-+      lcr_h = __raw_readl(uap->port.membase + UART010_LCRH);
-       if (break_state == -1)
-               lcr_h |= UART01x_LCRH_BRK;
-       else
-               lcr_h &= ~UART01x_LCRH_BRK;
--      writel(lcr_h, uap->port.membase + UART010_LCRH);
-+      __raw_writel(lcr_h, uap->port.membase + UART010_LCRH);
-       spin_unlock_irqrestore(&uap->port.lock, flags);
- }
-@@ -335,12 +333,12 @@ static int pl010_startup(struct uart_por
-       /*
-        * initialise the old status of the modem signals
-        */
--      uap->old_status = readb(uap->port.membase + UART01x_FR) & UART01x_FR_MODEM_ANY;
-+      uap->old_status = __raw_readl(uap->port.membase + UART01x_FR) & UART01x_FR_MODEM_ANY;
-       /*
-        * Finally, enable interrupts
-        */
--      writel(UART01x_CR_UARTEN | UART010_CR_RIE | UART010_CR_RTIE,
-+      __raw_writel(UART01x_CR_UARTEN | UART010_CR_RIE | UART010_CR_RTIE,
-              uap->port.membase + UART010_CR);
-       return 0;
-@@ -365,10 +363,10 @@ static void pl010_shutdown(struct uart_p
-       /*
-        * disable all interrupts, disable the port
-        */
--      writel(0, uap->port.membase + UART010_CR);
-+      __raw_writel(0, uap->port.membase + UART010_CR);
-       /* disable break condition and fifos */
--      writel(readb(uap->port.membase + UART010_LCRH) &
-+      __raw_writel(__raw_readl(uap->port.membase + UART010_LCRH) &
-               ~(UART01x_LCRH_BRK | UART01x_LCRH_FEN),
-              uap->port.membase + UART010_LCRH);
-@@ -391,7 +389,7 @@ pl010_set_termios(struct uart_port *port
-       /*
-        * Ask the core to calculate the divisor for us.
-        */
--      baud = uart_get_baud_rate(port, termios, old, 0, uap->port.uartclk/16); 
-+      baud = uart_get_baud_rate(port, termios, old, 0, uap->port.uartclk/16);
-       quot = uart_get_divisor(port, baud);
-       switch (termios->c_cflag & CSIZE) {
-@@ -454,25 +452,25 @@ pl010_set_termios(struct uart_port *port
-               uap->port.ignore_status_mask |= UART_DUMMY_RSR_RX;
-       /* first, disable everything */
--      old_cr = readb(uap->port.membase + UART010_CR) & ~UART010_CR_MSIE;
-+      old_cr = __raw_readl(uap->port.membase + UART010_CR) & ~UART010_CR_MSIE;
-       if (UART_ENABLE_MS(port, termios->c_cflag))
-               old_cr |= UART010_CR_MSIE;
--      writel(0, uap->port.membase + UART010_CR);
-+      __raw_writel(0, uap->port.membase + UART010_CR);
-       /* Set baud rate */
-       quot -= 1;
--      writel((quot & 0xf00) >> 8, uap->port.membase + UART010_LCRM);
--      writel(quot & 0xff, uap->port.membase + UART010_LCRL);
-+      __raw_writel((quot & 0xf00) >> 8, uap->port.membase + UART010_LCRM);
-+      __raw_writel(quot & 0xff, uap->port.membase + UART010_LCRL);
-       /*
-        * ----------v----------v----------v----------v-----
-        * NOTE: MUST BE WRITTEN AFTER UARTLCR_M & UARTLCR_L
-        * ----------^----------^----------^----------^-----
-        */
--      writel(lcr_h, uap->port.membase + UART010_LCRH);
--      writel(old_cr, uap->port.membase + UART010_CR);
-+      __raw_writel(lcr_h, uap->port.membase + UART010_LCRH);
-+      __raw_writel(old_cr, uap->port.membase + UART010_CR);
-       spin_unlock_irqrestore(&uap->port.lock, flags);
- }
-@@ -554,7 +552,7 @@ static struct uart_ops amba_pl010_pops =
-       .verify_port    = pl010_verify_port,
- };
--static struct uart_amba_port *amba_ports[UART_NR];
-+static struct uart_amba_port *amba_ports[SERIAL_AMBA_NR];
- #ifdef CONFIG_SERIAL_AMBA_PL010_CONSOLE
-@@ -564,10 +562,10 @@ static void pl010_console_putchar(struct
-       unsigned int status;
-       do {
--              status = readb(uap->port.membase + UART01x_FR);
-+              status = __raw_readl(uap->port.membase + UART01x_FR);
-               barrier();
-       } while (!UART_TX_READY(status));
--      writel(ch, uap->port.membase + UART01x_DR);
-+      __raw_writel(ch, uap->port.membase + UART01x_DR);
- }
- static void
-@@ -581,8 +579,8 @@ pl010_console_write(struct console *co,
-       /*
-        *      First save the CR then disable the interrupts
-        */
--      old_cr = readb(uap->port.membase + UART010_CR);
--      writel(UART01x_CR_UARTEN, uap->port.membase + UART010_CR);
-+      old_cr = __raw_readl(uap->port.membase + UART010_CR);
-+      __raw_writel(UART01x_CR_UARTEN, uap->port.membase + UART010_CR);
-       uart_console_write(&uap->port, s, count, pl010_console_putchar);
-@@ -591,10 +589,10 @@ pl010_console_write(struct console *co,
-        *      and restore the TCR
-        */
-       do {
--              status = readb(uap->port.membase + UART01x_FR);
-+              status = __raw_readl(uap->port.membase + UART01x_FR);
-               barrier();
-       } while (status & UART01x_FR_BUSY);
--      writel(old_cr, uap->port.membase + UART010_CR);
-+      __raw_writel(old_cr, uap->port.membase + UART010_CR);
-       clk_disable(uap->clk);
- }
-@@ -603,9 +601,9 @@ static void __init
- pl010_console_get_options(struct uart_amba_port *uap, int *baud,
-                            int *parity, int *bits)
- {
--      if (readb(uap->port.membase + UART010_CR) & UART01x_CR_UARTEN) {
-+      if (__raw_readl(uap->port.membase + UART010_CR) & UART01x_CR_UARTEN) {
-               unsigned int lcr_h, quot;
--              lcr_h = readb(uap->port.membase + UART010_LCRH);
-+              lcr_h = __raw_readl(uap->port.membase + UART010_LCRH);
-               *parity = 'n';
-               if (lcr_h & UART01x_LCRH_PEN) {
-@@ -620,8 +618,8 @@ pl010_console_get_options(struct uart_am
-               else
-                       *bits = 8;
--              quot = readb(uap->port.membase + UART010_LCRL) |
--                     readb(uap->port.membase + UART010_LCRM) << 8;
-+              quot = __raw_readl(uap->port.membase + UART010_LCRL) |
-+                     __raw_readl(uap->port.membase + UART010_LCRM) << 8;
-               *baud = uap->port.uartclk / (16 * (quot + 1));
-       }
- }
-@@ -640,7 +638,7 @@ static int __init pl010_console_setup(st
-        * if so, search for the first available port that does have
-        * console support.
-        */
--      if (co->index >= UART_NR)
-+      if (co->index >= SERIAL_AMBA_NR)
-               co->index = 0;
-       uap = amba_ports[co->index];
-       if (!uap)
-@@ -682,7 +680,7 @@ static struct uart_driver amba_reg = {
-       .dev_name               = "ttyAM",
-       .major                  = SERIAL_AMBA_MAJOR,
-       .minor                  = SERIAL_AMBA_MINOR,
--      .nr                     = UART_NR,
-+      .nr                     = SERIAL_AMBA_NR,
-       .cons                   = AMBA_CONSOLE,
- };
---- a/drivers/tty/serial/Kconfig
-+++ b/drivers/tty/serial/Kconfig
-@@ -16,10 +16,18 @@ config SERIAL_AMBA_PL010
-       help
-         This selects the ARM(R) AMBA(R) PrimeCell PL010 UART.  If you have
-         an Integrator/AP or Integrator/PP2 platform, or if you have a
--        Cirrus Logic EP93xx CPU, say Y or M here.
-+        Cirrus Logic EP93xx CPU or an Infineon ADM5120 SOC, say Y or M here.
-         If unsure, say N.
-+config SERIAL_AMBA_PL010_NUMPORTS
-+      int "Maximum number of AMBA PL010 serial ports"
-+      depends on SERIAL_AMBA_PL010
-+      default "8"
-+      ---help---
-+        Set this to the number of serial ports you want the AMBA PL010 driver
-+        to support.
-+
- config SERIAL_AMBA_PL010_CONSOLE
-       bool "Support for console on AMBA serial port"
-       depends on SERIAL_AMBA_PL010=y
diff --git a/target/linux/adm5120/patches-3.6/201-amba_bus_hacks.patch b/target/linux/adm5120/patches-3.6/201-amba_bus_hacks.patch
deleted file mode 100644 (file)
index dfc0744..0000000
+++ /dev/null
@@ -1,13 +0,0 @@
---- a/drivers/amba/bus.c
-+++ b/drivers/amba/bus.c
-@@ -20,6 +20,10 @@
- #include <asm/irq.h>
-+#ifndef NO_IRQ
-+#define NO_IRQ                (-1)
-+#endif
-+
- #define to_amba_driver(d)     container_of(d, struct amba_driver, drv)
- static const struct amba_id *
diff --git a/target/linux/adm5120/patches-3.6/203-gpio_leds_brightness.patch b/target/linux/adm5120/patches-3.6/203-gpio_leds_brightness.patch
deleted file mode 100644 (file)
index 195ff6a..0000000
+++ /dev/null
@@ -1,27 +0,0 @@
---- a/drivers/leds/leds-gpio.c
-+++ b/drivers/leds/leds-gpio.c
-@@ -54,13 +54,17 @@ static void gpio_led_set(struct led_clas
-               container_of(led_cdev, struct gpio_led_data, cdev);
-       int level;
--      if (value == LED_OFF)
--              level = 0;
--      else
--              level = 1;
--
--      if (led_dat->active_low)
--              level = !level;
-+      switch (value) {
-+      case LED_OFF:
-+              level = led_dat->active_low ? 1 : 0;
-+              break;
-+      case LED_FULL:
-+              level = led_dat->active_low ? 0 : 1;
-+              break;
-+      default:
-+              level = value;
-+              break;
-+      }
-       /* Setting GPIOs with I2C/etc requires a task context, and we don't
-        * seem to have a reliable way to know if we're already in one; so
diff --git a/target/linux/adm5120/patches-3.6/310-adm5120_wdt.patch b/target/linux/adm5120/patches-3.6/310-adm5120_wdt.patch
deleted file mode 100644 (file)
index d55f63c..0000000
+++ /dev/null
@@ -1,31 +0,0 @@
---- a/drivers/watchdog/Kconfig
-+++ b/drivers/watchdog/Kconfig
-@@ -972,6 +972,18 @@ config RC32434_WDT
-         To compile this driver as a module, choose M here: the
-         module will be called rc32434_wdt.
-+config ADM5120_WDT
-+      tristate "Infineon ADM5120 SoC hardware watchdog"
-+      depends on WATCHDOG && ADM5120
-+      help
-+        This is a driver for hardware watchdog integrated in Infineon
-+        ADM5120 SoC. This watchdog simply watches your kernel to make sure
-+        it doesn't freeze, and if it does, it reboots your computer after a
-+        certain amount of time.
-+
-+        To compile this driver as a module, choose M here: the module will be
-+        called adm5120_wdt.
-+
- config INDYDOG
-       tristate "Indy/I2 Hardware Watchdog"
-       depends on SGI_HAS_INDYDOG
---- a/drivers/watchdog/Makefile
-+++ b/drivers/watchdog/Makefile
-@@ -122,6 +122,7 @@ obj-$(CONFIG_ATH79_WDT) += ath79_wdt.o
- obj-$(CONFIG_BCM47XX_WDT) += bcm47xx_wdt.o
- obj-$(CONFIG_BCM63XX_WDT) += bcm63xx_wdt.o
- obj-$(CONFIG_RC32434_WDT) += rc32434_wdt.o
-+obj-$(CONFIG_ADM5120_WDT) += adm5120_wdt.o
- obj-$(CONFIG_INDYDOG) += indydog.o
- obj-$(CONFIG_JZ4740_WDT) += jz4740_wdt.o
- obj-$(CONFIG_WDT_MTX1) += mtx-1_wdt.o
diff --git a/target/linux/adm5120/rb1xx/config-3.6 b/target/linux/adm5120/rb1xx/config-3.6
deleted file mode 100644 (file)
index 69c545c..0000000
+++ /dev/null
@@ -1,54 +0,0 @@
-# CONFIG_ADM5120_MACH_5GXI is not set
-# CONFIG_ADM5120_MACH_BR_6104K is not set
-# CONFIG_ADM5120_MACH_BR_6104KP is not set
-# CONFIG_ADM5120_MACH_BR_61X4WG is not set
-# CONFIG_ADM5120_MACH_CAS_771 is not set
-# CONFIG_ADM5120_MACH_EASY5120P_ATA is not set
-# CONFIG_ADM5120_MACH_EASY5120_RT is not set
-# CONFIG_ADM5120_MACH_EASY5120_WVOIP is not set
-# CONFIG_ADM5120_MACH_EASY83000 is not set
-# CONFIG_ADM5120_MACH_EB_214A is not set
-# CONFIG_ADM5120_MACH_NFS_101 is not set
-# CONFIG_ADM5120_MACH_NP27G is not set
-# CONFIG_ADM5120_MACH_NP28G is not set
-# CONFIG_ADM5120_MACH_PMUGW is not set
-CONFIG_ADM5120_MACH_RB_11X=y
-CONFIG_ADM5120_MACH_RB_133=y
-CONFIG_ADM5120_MACH_RB_133C=y
-CONFIG_ADM5120_MACH_RB_150=y
-CONFIG_ADM5120_MACH_RB_153=y
-CONFIG_ADM5120_MACH_RB_192=y
-# CONFIG_ADM5120_MACH_WP54 is not set
-# CONFIG_ADM5120_OEM_CELLVISION is not set
-# CONFIG_ADM5120_OEM_COMPEX is not set
-# CONFIG_ADM5120_OEM_EDIMAX is not set
-# CONFIG_ADM5120_OEM_GENERIC is not set
-# CONFIG_ADM5120_OEM_INFINEON is not set
-CONFIG_ADM5120_OEM_MIKROTIK=y
-# CONFIG_ADM5120_OEM_MOTOROLA is not set
-# CONFIG_ADM5120_OEM_OSBRIDGE is not set
-CONFIG_CMDLINE="console=ttyAM0,115200 rootfstype=yaffs2"
-# CONFIG_JFFS2_FS is not set
-# CONFIG_MTD_MYLOADER_PARTS is not set
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_ECC=y
-CONFIG_MTD_NAND_PLATFORM=y
-# CONFIG_MTD_ROOTFS_SPLIT is not set
-# CONFIG_MTD_SM_COMMON is not set
-# CONFIG_MTD_TRXSPLIT is not set
-# CONFIG_OVERLAYFS_FS is not set
-# CONFIG_PATA_RB153_CF is not set
-# CONFIG_SQUASHFS is not set
-CONFIG_YAFFS_9BYTE_TAGS=y
-# CONFIG_YAFFS_ALWAYS_CHECK_CHUNK_ERASED is not set
-CONFIG_YAFFS_AUTO_YAFFS2=y
-# CONFIG_YAFFS_DISABLE_BACKGROUND is not set
-# CONFIG_YAFFS_DISABLE_BLOCK_REFRESHING is not set
-CONFIG_YAFFS_DISABLE_TAGS_ECC=y
-# CONFIG_YAFFS_DISABLE_WIDE_TNODES is not set
-# CONFIG_YAFFS_EMPTY_LOST_AND_FOUND is not set
-CONFIG_YAFFS_FS=y
-CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y
-CONFIG_YAFFS_XATTR=y
-CONFIG_YAFFS_YAFFS1=y
-CONFIG_YAFFS_YAFFS2=y
diff --git a/target/linux/adm5120/router_be/config-3.6 b/target/linux/adm5120/router_be/config-3.6
deleted file mode 100644 (file)
index c3b9e36..0000000
+++ /dev/null
@@ -1,13 +0,0 @@
-CONFIG_ADM5120_MACH_P_334WT=y
-CONFIG_ADM5120_MACH_P_335=y
-# CONFIG_ADM5120_OEM_CELLVISION is not set
-# CONFIG_ADM5120_OEM_COMPEX is not set
-# CONFIG_ADM5120_OEM_EDIMAX is not set
-# CONFIG_ADM5120_OEM_GENERIC is not set
-# CONFIG_ADM5120_OEM_INFINEON is not set
-# CONFIG_ADM5120_OEM_MOTOROLA is not set
-# CONFIG_ADM5120_OEM_OSBRIDGE is not set
-CONFIG_ADM5120_OEM_ZYXEL=y
-CONFIG_CPU_BIG_ENDIAN=y
-# CONFIG_CPU_LITTLE_ENDIAN is not set
-CONFIG_SWAP_IO_SPACE=y
diff --git a/target/linux/adm5120/router_le/config-3.6 b/target/linux/adm5120/router_le/config-3.6
deleted file mode 100644 (file)
index e69de29..0000000