bcm53xx: make use of the new board detection layer
authorFelix Fietkau <nbd@openwrt.org>
Thu, 16 Apr 2015 12:18:34 +0000 (12:18 +0000)
committerFelix Fietkau <nbd@openwrt.org>
Thu, 16 Apr 2015 12:18:34 +0000 (12:18 +0000)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45458

target/linux/bcm53xx/base-files/etc/board.d/02_network [new file with mode: 0755]
target/linux/bcm53xx/base-files/etc/uci-defaults/02_network [deleted file]

diff --git a/target/linux/bcm53xx/base-files/etc/board.d/02_network b/target/linux/bcm53xx/base-files/etc/board.d/02_network
new file mode 100755 (executable)
index 0000000..c36b47c
--- /dev/null
@@ -0,0 +1,35 @@
+#!/bin/sh
+#
+# Copyright (C) 2011 OpenWrt.org
+#
+
+. /lib/functions/uci-defaults-new.sh
+
+board_config_update
+
+ucidef_set_interface_loopback
+
+ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
+ucidef_add_switch "switch0" "1" "1"
+
+vlan1ports="$(nvram get vlan1ports)"
+vlan2ports="$(nvram get vlan2ports)"
+if echo "$vlan1ports" | egrep -q "^1 2 3 4 5" && \
+   echo "$vlan2ports" | egrep -q "^0 5"; then
+       ucidef_add_switch_vlan "switch0" "1" "1 2 3 4 5t"
+       ucidef_add_switch_vlan "switch0" "2" "0 5t"
+elif echo "$vlan1ports" | egrep -q "^0 1 2 3 5 7 8" && \
+     echo "$vlan2ports" | egrep -q "^4 8"; then
+       ucidef_add_switch_vlan "switch0" "1" "0 1 2 3 5 7 8t"
+       ucidef_add_switch_vlan "switch0" "2" "4 8t"
+else
+       # This also handles some funcy (e.g. R6250) configs like:
+       # vlan1ports=3 2 1 0 5*
+       # vlan2ports=4 5u
+       ucidef_add_switch_vlan "switch0" "1" "0 1 2 3 5t"
+       ucidef_add_switch_vlan "switch0" "2" "4 5t"
+fi
+
+board_config_flush
+
+exit 0
diff --git a/target/linux/bcm53xx/base-files/etc/uci-defaults/02_network b/target/linux/bcm53xx/base-files/etc/uci-defaults/02_network
deleted file mode 100644 (file)
index 9ffb427..0000000
+++ /dev/null
@@ -1,37 +0,0 @@
-#!/bin/sh
-#
-# Copyright (C) 2011 OpenWrt.org
-#
-
-[ -e /etc/config/network ] && exit 0
-
-touch /etc/config/network
-
-. /lib/functions/uci-defaults.sh
-
-ucidef_set_interface_loopback
-
-ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
-ucidef_add_switch "switch0" "1" "1"
-
-vlan1ports="$(nvram get vlan1ports)"
-vlan2ports="$(nvram get vlan2ports)"
-if echo "$vlan1ports" | egrep -q "^1 2 3 4 5" && \
-   echo "$vlan2ports" | egrep -q "^0 5"; then
-       ucidef_add_switch_vlan "switch0" "1" "1 2 3 4 5t"
-       ucidef_add_switch_vlan "switch0" "2" "0 5t"
-elif echo "$vlan1ports" | egrep -q "^0 1 2 3 5 7 8" && \
-     echo "$vlan2ports" | egrep -q "^4 8"; then
-       ucidef_add_switch_vlan "switch0" "1" "0 1 2 3 5 7 8t"
-       ucidef_add_switch_vlan "switch0" "2" "4 8t"
-else
-       # This also handles some funcy (e.g. R6250) configs like:
-       # vlan1ports=3 2 1 0 5*
-       # vlan2ports=4 5u
-       ucidef_add_switch_vlan "switch0" "1" "0 1 2 3 5t"
-       ucidef_add_switch_vlan "switch0" "2" "4 5t"
-fi
-
-uci commit network
-
-exit 0