Adjust patches for kernel 5.15.
Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
--- a/MAINTAINERS
+++ b/MAINTAINERS
-@@ -14816,6 +14816,13 @@ S: Maintained
+@@ -15887,6 +15887,13 @@ S: Maintained
F: include/sound/rt*.h
F: sound/soc/codecs/rt*
S: Maintained
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
-@@ -995,6 +995,19 @@ config RTD119X_WATCHDOG
+@@ -954,6 +954,19 @@ config RTD119X_WATCHDOG
Say Y here to include support for the watchdog timer in
Realtek RTD1295 SoCs.
depends on ARCH_SPRD || COMPILE_TEST
--- a/drivers/watchdog/Makefile
+++ b/drivers/watchdog/Makefile
-@@ -174,6 +174,7 @@ obj-$(CONFIG_IMGPDC_WDT) += imgpdc_wdt.o
+@@ -171,6 +171,7 @@ obj-$(CONFIG_IMGPDC_WDT) += imgpdc_wdt.o
obj-$(CONFIG_MT7621_WDT) += mt7621_wdt.o
obj-$(CONFIG_PIC32_WDT) += pic32-wdt.o
obj-$(CONFIG_PIC32_DMT) += pic32-dmt.o
#define MII_REGADDR_C45_MASK GENMASK(15, 0)
struct gpio_desc;
-@@ -342,6 +344,16 @@ static inline u32 mdiobus_c45_addr(int d
+@@ -355,6 +357,16 @@ static inline u32 mdiobus_c45_addr(int d
return MII_ADDR_C45 | devad << MII_DEVADDR_C45_SHIFT | regnum;
}
}
/* Set the rising and falling edge mask bits for a GPIO port pin */
-@@ -253,6 +289,7 @@ MODULE_DEVICE_TABLE(of, realtek_gpio_of_
+@@ -250,6 +286,7 @@ MODULE_DEVICE_TABLE(of, realtek_gpio_of_
static int realtek_gpio_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
unsigned int dev_flags;
struct gpio_irq_chip *girq;
struct realtek_gpio_ctrl *ctrl;
-@@ -280,10 +317,20 @@ static int realtek_gpio_probe(struct pla
+@@ -277,10 +314,20 @@ static int realtek_gpio_probe(struct pla
raw_spin_lock_init(&ctrl->lock);
};
static struct realtek_gpio_ctrl *irq_data_to_ctrl(struct irq_data *data)
-@@ -250,14 +258,61 @@ static void realtek_gpio_irq_handler(str
+@@ -247,14 +255,61 @@ static void realtek_gpio_irq_handler(str
chained_irq_exit(irq_chip, desc);
}
}
return 0;
-@@ -269,6 +324,7 @@ static struct irq_chip realtek_gpio_irq_
+@@ -266,6 +321,7 @@ static struct irq_chip realtek_gpio_irq_
.irq_mask = realtek_gpio_irq_mask,
.irq_unmask = realtek_gpio_irq_unmask,
.irq_set_type = realtek_gpio_irq_set_type,
};
static const struct of_device_id realtek_gpio_of_match[] = {
-@@ -293,8 +349,10 @@ static int realtek_gpio_probe(struct pla
+@@ -290,8 +346,10 @@ static int realtek_gpio_probe(struct pla
unsigned int dev_flags;
struct gpio_irq_chip *girq;
struct realtek_gpio_ctrl *ctrl;
ctrl = devm_kzalloc(dev, sizeof(*ctrl), GFP_KERNEL);
if (!ctrl)
-@@ -355,6 +413,21 @@ static int realtek_gpio_probe(struct pla
+@@ -352,6 +410,21 @@ static int realtek_gpio_probe(struct pla
girq->init_hw = realtek_gpio_irq_init;
}
--- a/drivers/gpio/gpio-realtek-otto.c
+++ b/drivers/gpio/gpio-realtek-otto.c
-@@ -338,6 +338,10 @@ static const struct of_device_id realtek
+@@ -335,6 +335,10 @@ static const struct of_device_id realtek
{
.compatible = "realtek,rtl8390-gpio",
},
--- a/drivers/gpio/gpio-realtek-otto.c
+++ b/drivers/gpio/gpio-realtek-otto.c
-@@ -342,6 +342,9 @@ static const struct of_device_id realtek
+@@ -339,6 +339,9 @@ static const struct of_device_id realtek
.compatible = "realtek,rtl9300-gpio",
.data = (void *)(GPIO_PORTS_REVERSED | GPIO_INTERRUPTS_PER_CPU)
},
--- a/arch/mips/Kbuild.platforms
+++ b/arch/mips/Kbuild.platforms
-@@ -23,6 +23,7 @@ platform-$(CONFIG_PIC32MZDA) += pic32/
- platform-$(CONFIG_MACH_PISTACHIO) += pistachio/
+@@ -23,6 +23,7 @@ platform-$(CONFIG_NLM_COMMON) += netlog
+ platform-$(CONFIG_PIC32MZDA) += pic32/
platform-$(CONFIG_RALINK) += ralink/
platform-$(CONFIG_MIKROTIK_RB532) += rb532/
+platform-$(CONFIG_RTL83XX) += rtl838x/
platform-$(CONFIG_SGI_IP28) += sgi-ip22/
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
-@@ -1037,8 +1037,58 @@ config NLM_XLP_BOARD
+@@ -1053,8 +1053,58 @@ config NLM_XLP_BOARD
This board is based on Netlogic XLP Processor.
Say Y here if you have a XLP based board.
source "arch/mips/alchemy/Kconfig"
source "arch/mips/ath25/Kconfig"
source "arch/mips/ath79/Kconfig"
-@@ -1097,6 +1147,9 @@ config CEVT_GT641XX
+@@ -1112,6 +1162,9 @@ config CEVT_GT641XX
config CEVT_R4K
bool
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
-@@ -508,6 +508,12 @@ config GPIO_REG
- A 32-bit single register GPIO fixed in/out implementation. This
- can be used to represent any register as a set of GPIO signals.
+@@ -529,6 +529,12 @@ config GPIO_ROCKCHIP
+ help
+ Say yes here to support GPIO on Rockchip SoCs.
+config GPIO_RTL8231
+ tristate "RTL8231 GPIO"
depends on MFD_SYSCON
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
-@@ -127,6 +127,7 @@ obj-$(CONFIG_GPIO_RDA) += gpio-rda.o
- obj-$(CONFIG_GPIO_RDC321X) += gpio-rdc321x.o
+@@ -129,6 +129,7 @@ obj-$(CONFIG_GPIO_RDC321X) += gpio-rdc3
obj-$(CONFIG_GPIO_REALTEK_OTTO) += gpio-realtek-otto.o
obj-$(CONFIG_GPIO_REG) += gpio-reg.o
+ obj-$(CONFIG_GPIO_ROCKCHIP) += gpio-rockchip.o
+obj-$(CONFIG_GPIO_RTL8231) += gpio-rtl8231.o
obj-$(CONFIG_ARCH_SA1100) += gpio-sa1100.o
obj-$(CONFIG_GPIO_SAMA5D2_PIOBU) += gpio-sama5d2-piobu.o
depends on HAS_IOMEM
--- a/drivers/clocksource/Makefile
+++ b/drivers/clocksource/Makefile
-@@ -63,6 +63,7 @@ obj-$(CONFIG_MILBEAUT_TIMER) += timer-mi
+@@ -58,6 +58,7 @@ obj-$(CONFIG_MILBEAUT_TIMER) += timer-mi
obj-$(CONFIG_SPRD_TIMER) += timer-sprd.o
obj-$(CONFIG_NPCM7XX_TIMER) += timer-npcm7xx.o
obj-$(CONFIG_RDA_TIMER) += timer-rda.o
obj-$(CONFIG_ARM_ARCH_TIMER) += arm_arch_timer.o
--- a/include/linux/cpuhotplug.h
+++ b/include/linux/cpuhotplug.h
-@@ -133,6 +133,7 @@ enum cpuhp_state {
+@@ -177,6 +177,7 @@ enum cpuhp_state {
CPUHP_AP_MARCO_TIMER_STARTING,
CPUHP_AP_MIPS_GIC_TIMER_STARTING,
CPUHP_AP_ARC_TIMER_STARTING,
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
-@@ -491,8 +491,8 @@ config GPIO_RDA
+@@ -503,8 +503,8 @@ config GPIO_RDA
config GPIO_REALTEK_OTTO
tristate "Realtek Otto GPIO support"
--- a/drivers/spi/Makefile
+++ b/drivers/spi/Makefile
-@@ -94,7 +94,7 @@ obj-$(CONFIG_SPI_QCOM_QSPI) += spi-qcom
- obj-$(CONFIG_SPI_QUP) += spi-qup.o
+@@ -97,7 +97,7 @@ obj-$(CONFIG_SPI_QUP) += spi-qup.o
obj-$(CONFIG_SPI_ROCKCHIP) += spi-rockchip.o
+ obj-$(CONFIG_SPI_ROCKCHIP_SFC) += spi-rockchip-sfc.o
obj-$(CONFIG_SPI_RB4XX) += spi-rb4xx.o
-obj-$(CONFIG_MACH_REALTEK_RTL) += spi-realtek-rtl.o
+obj-$(CONFIG_RTL83XX) += spi-realtek-rtl.o
--- a/drivers/irqchip/Makefile
+++ b/drivers/irqchip/Makefile
-@@ -114,4 +114,4 @@ obj-$(CONFIG_LOONGSON_PCH_PIC) += irq-l
+@@ -112,7 +112,7 @@ obj-$(CONFIG_LOONGSON_PCH_PIC) += irq-l
obj-$(CONFIG_LOONGSON_PCH_MSI) += irq-loongson-pch-msi.o
obj-$(CONFIG_MST_IRQ) += irq-mst-intc.o
obj-$(CONFIG_SL28CPLD_INTC) += irq-sl28cpld.o
-obj-$(CONFIG_MACH_REALTEK_RTL) += irq-realtek-rtl.o
+obj-$(CONFIG_RTL83XX) += irq-realtek-rtl.o
+ obj-$(CONFIG_WPCM450_AIC) += irq-wpcm450-aic.o
+ obj-$(CONFIG_IRQ_IDT3243X) += irq-idt3243x.o
+ obj-$(CONFIG_APPLE_AIC) += irq-apple-aic.o
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
-@@ -997,10 +997,10 @@ config RTD119X_WATCHDOG
+@@ -956,10 +956,10 @@ config RTD119X_WATCHDOG
config REALTEK_OTTO_WDT
tristate "Realtek Otto MIPS watchdog support"
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
-@@ -954,6 +954,16 @@ config I2C_RK3X
+@@ -949,6 +949,16 @@ config I2C_RK3X
This driver can also be built as a module. If so, the module will
be called i2c-rk3x.
help
--- a/drivers/i2c/busses/Makefile
+++ b/drivers/i2c/busses/Makefile
-@@ -95,6 +95,7 @@ obj-$(CONFIG_I2C_QCOM_GENI) += i2c-qcom-
+@@ -94,6 +94,7 @@ obj-$(CONFIG_I2C_QCOM_GENI) += i2c-qcom-
obj-$(CONFIG_I2C_QUP) += i2c-qup.o
obj-$(CONFIG_I2C_RIIC) += i2c-riic.o
obj-$(CONFIG_I2C_RK3X) += i2c-rk3x.o
--- a/arch/mips/Makefile
+++ b/arch/mips/Makefile
-@@ -307,14 +307,24 @@ endif
+@@ -310,14 +310,24 @@ endif
KBUILD_AFLAGS += $(cflags-y)
KBUILD_CFLAGS += $(cflags-y)
raw_spin_unlock_irqrestore(&irq_lock, flags);
}
-@@ -44,137 +86,247 @@ static void realtek_ictl_mask_irq(struct
+@@ -44,52 +86,137 @@ static void realtek_ictl_mask_irq(struct
{
unsigned long flags;
u32 value;
static int intc_map(struct irq_domain *d, unsigned int irq, irq_hw_number_t hw)
{
-- irq_set_chip_and_handler(hw, &realtek_ictl_irq, handle_level_irq);
+ struct realtek_ictl_output *output = d->host_data;
+ unsigned long flags;
+
-+ irq_set_chip_and_handler(irq, &realtek_ictl_irq, handle_level_irq);
-+
+ irq_set_chip_and_handler(irq, &realtek_ictl_irq, handle_level_irq);
+
+ raw_spin_lock_irqsave(&irq_lock, flags);
+
+ output->child_mask |= BIT(hw);
+ write_irr(REG(RTL_ICTL_IRR0, 0), hw, output->output_index + 1);
+
+ raw_spin_unlock_irqrestore(&irq_lock, flags);
-
++
return 0;
}
+ struct realtek_ictl_output *output = irq_desc_get_handler_data(desc);
struct irq_chip *chip = irq_desc_get_chip(desc);
- struct irq_domain *domain;
-- unsigned int pending;
+ int cpu = smp_processor_id();
-+ unsigned long pending;
-+ unsigned int soc_int;
+ unsigned long pending;
+ unsigned int soc_int;
chained_irq_enter(chip, desc);
- pending = readl(REG(RTL_ICTL_GIMR)) & readl(REG(RTL_ICTL_GISR));
+ pending = readl(REG(RTL_ICTL_GIMR, cpu)) & readl(REG(RTL_ICTL_GISR, cpu))
+ & output->child_mask;
-+
+
if (unlikely(!pending)) {
spurious_interrupt();
goto out;
}
+
- domain = irq_desc_get_handler_data(desc);
-- generic_handle_irq(irq_find_mapping(domain, __ffs(pending)));
-+
+- for_each_set_bit(soc_int, &pending, 32)
+- generic_handle_domain_irq(domain, soc_int);
+ for_each_set_bit(soc_int, &pending, RTL_ICTL_NUM_INPUTS)
-+ generic_handle_irq(irq_find_mapping(output->domain, soc_int));
-+// generic_handle_domain_irq(output->domain, soc_int);
++ generic_handle_domain_irq(output->domain, soc_int);
out:
chained_irq_exit(chip, desc);
- }
-
--/*
-- * SoC interrupts are cascaded to MIPS CPU interrupts according to the
-- * interrupt-map in the device tree. Each SoC interrupt gets 4 bits for
-- * the CPU interrupt in an Interrupt Routing Register. Max 32 SoC interrupts
-- * thus go into 4 IRRs.
-- */
+@@ -102,85 +229,110 @@ out:
+ * thus go into 4 IRRs. A routing value of '0' means the interrupt is left
+ * disconnected. Routing values {1..15} connect to output lines {0..14}.
+ */
-static int __init map_interrupts(struct device_node *node, struct irq_domain *domain)
+static int __init setup_parent_interrupts(struct device_node *node, int *parents,
+ unsigned int num_parents)
- if (!cpu_ictl)
- return -EINVAL;
- ret = of_property_read_u32(cpu_ictl, "#interrupt-cells", &tmp);
+- of_node_put(cpu_ictl);
- if (ret || tmp != 1)
- return -EINVAL;
-- of_node_put(cpu_ictl);
-
- cpu_int = be32_to_cpup(imap + 2);
-- if (cpu_int > 7)
+- if (cpu_int > 7 || cpu_int < 2)
- return -EINVAL;
-
- if (!(mips_irqs_set & BIT(cpu_int))) {
+ if (!domain)
+ goto domain_err;
-- regs[(soc_int * 4) / 32] |= cpu_int << (soc_int * 4) % 32;
+- /* Use routing values (1..6) for CPU interrupts (2..7) */
+- regs[(soc_int * 4) / 32] |= (cpu_int - 1) << (soc_int * 4) % 32;
- imap += 3;
- }
+ output->fwnode = of_node_to_fwnode(node);
--- a/drivers/gpio/gpio-realtek-otto.c
+++ b/drivers/gpio/gpio-realtek-otto.c
-@@ -304,6 +304,7 @@ static int realtek_gpio_irq_set_affinity
+@@ -301,6 +301,7 @@ static int realtek_gpio_irq_set_affinity
static int realtek_gpio_irq_init(struct gpio_chip *gc)
{
struct realtek_gpio_ctrl *ctrl = gpiochip_get_data(gc);
unsigned int port;
int cpu;
-@@ -311,8 +312,16 @@ static int realtek_gpio_irq_init(struct
+@@ -308,8 +309,16 @@ static int realtek_gpio_irq_init(struct
realtek_gpio_write_imr(ctrl, port, 0, 0);
realtek_gpio_clear_isr(ctrl, port, GENMASK(7, 0));
Update patch for missing upstream changes:
- commit a01a40e33499 ("gpio: realtek-otto: Make the irqchip immutable")
- - commit dbd1c54fc820 ("gpio: Bulk conversion to generic_handle_domain_irq()")
Signed-off-by: Sander Vanheule <sander@svanheule.net>
---
raw_spin_unlock_irqrestore(&ctrl->lock, flags);
return 0;
-@@ -238,31 +248,24 @@ static void realtek_gpio_irq_handler(str
+@@ -238,28 +248,21 @@ static void realtek_gpio_irq_handler(str
struct gpio_chip *gc = irq_desc_get_handler_data(desc);
struct realtek_gpio_ctrl *ctrl = gpiochip_get_data(gc);
struct irq_chip *irq_chip = irq_desc_get_chip(desc);
- unsigned int lines_done;
- unsigned int port_pin_count;
- unsigned int irq;
unsigned long status;
int offset;
- for (lines_done = 0; lines_done < gc->ngpio; lines_done += 8) {
- status = realtek_gpio_read_isr(ctrl, lines_done / 8);
- port_pin_count = min(gc->ngpio - lines_done, 8U);
-- for_each_set_bit(offset, &status, port_pin_count) {
-- irq = irq_find_mapping(gc->irq.domain, offset + lines_done);
-- generic_handle_irq(irq);
-- }
+- for_each_set_bit(offset, &status, port_pin_count)
+- generic_handle_domain_irq(gc->irq.domain, offset + lines_done);
+- }
+ status = realtek_gpio_read_isr(ctrl);
-+ for_each_set_bit(offset, &status, gc->ngpio) {
-+ irq = irq_find_mapping(gc->irq.domain, offset);
-+ generic_handle_irq(irq);
- }
++ for_each_set_bit(offset, &status, gc->ngpio)
++ generic_handle_domain_irq(gc->irq.domain, offset);
chained_irq_exit(irq_chip, desc);
}
}
static int realtek_gpio_irq_set_affinity(struct irq_data *data,
-@@ -270,12 +273,10 @@ static int realtek_gpio_irq_set_affinity
+@@ -267,12 +270,10 @@ static int realtek_gpio_irq_set_affinity
{
struct realtek_gpio_ctrl *ctrl = irq_data_to_ctrl(data);
unsigned int line = irqd_to_hwirq(data);
if (!ctrl->cpumask_base)
return -ENXIO;
-@@ -283,15 +284,15 @@ static int realtek_gpio_irq_set_affinity
+@@ -280,15 +281,15 @@ static int realtek_gpio_irq_set_affinity
raw_spin_lock_irqsave(&ctrl->lock, flags);
for_each_cpu(cpu, &ctrl->cpu_irq_maskable) {
}
raw_spin_unlock_irqrestore(&ctrl->lock, flags);
-@@ -305,22 +306,23 @@ static int realtek_gpio_irq_init(struct
+@@ -302,22 +303,23 @@ static int realtek_gpio_irq_init(struct
{
struct realtek_gpio_ctrl *ctrl = gpiochip_get_data(gc);
void __iomem *irq_cpu_mask;
}
}
-@@ -393,12 +395,14 @@ static int realtek_gpio_probe(struct pla
+@@ -390,12 +392,14 @@ static int realtek_gpio_probe(struct pla
if (dev_flags & GPIO_PORTS_REVERSED) {
bgpio_flags = 0;
--- a/drivers/clk/Kconfig
+++ b/drivers/clk/Kconfig
-@@ -372,6 +372,7 @@ source "drivers/clk/mediatek/Kconfig"
- source "drivers/clk/meson/Kconfig"
+@@ -405,6 +405,7 @@ source "drivers/clk/mstar/Kconfig"
source "drivers/clk/mvebu/Kconfig"
+ source "drivers/clk/pistachio/Kconfig"
source "drivers/clk/qcom/Kconfig"
+source "drivers/clk/realtek/Kconfig"
+ source "drivers/clk/ralink/Kconfig"
source "drivers/clk/renesas/Kconfig"
source "drivers/clk/rockchip/Kconfig"
- source "drivers/clk/samsung/Kconfig"
--- a/drivers/clk/Makefile
+++ b/drivers/clk/Makefile
-@@ -100,6 +100,7 @@ obj-$(CONFIG_COMMON_CLK_NXP) += nxp/
- obj-$(CONFIG_MACH_PISTACHIO) += pistachio/
+@@ -101,6 +101,7 @@ obj-$(CONFIG_COMMON_CLK_PISTACHIO) += pi
obj-$(CONFIG_COMMON_CLK_PXA) += pxa/
obj-$(CONFIG_COMMON_CLK_QCOM) += qcom/
+ obj-y += ralink/
+obj-$(CONFIG_COMMON_CLK_REALTEK) += realtek/
obj-y += renesas/
obj-$(CONFIG_ARCH_ROCKCHIP) += rockchip/
raw_spin_unlock_irqrestore(&irq_lock, flags);
-@@ -279,9 +315,11 @@ static int __init realtek_rtl_of_init(st
+@@ -285,9 +321,11 @@ static int __init realtek_rtl_of_init(st
cpumask_set_cpu(cpu, &realtek_ictl_cpu_configurable);
/* Disable all cascaded interrupts and clear routing */
--- a/drivers/net/dsa/Kconfig
+++ b/drivers/net/dsa/Kconfig
-@@ -68,6 +68,8 @@ config NET_DSA_QCA8K
- This enables support for the Qualcomm Atheros QCA8K Ethernet
- switch chips.
+@@ -60,6 +60,8 @@ source "drivers/net/dsa/sja1105/Kconfig"
+
+ source "drivers/net/dsa/xrs700x/Kconfig"
+source "drivers/net/dsa/rtl83xx/Kconfig"
+
config NET_DSA_REALTEK_SMI
tristate "Realtek SMI Ethernet switch family support"
- depends on NET_DSA
+ select NET_DSA_TAG_RTL4_A
--- a/drivers/net/dsa/Makefile
+++ b/drivers/net/dsa/Makefile
-@@ -23,3 +23,4 @@ obj-y += mv88e6xxx/
+@@ -22,5 +22,6 @@ obj-y += microchip/
+ obj-y += mv88e6xxx/
obj-y += ocelot/
obj-y += qca/
- obj-y += sja1105/
+obj-y += rtl83xx/
+ obj-y += sja1105/
+ obj-y += xrs700x/
trailer[2] = 0x10;
trailer[3] = 0x00;
-@@ -34,12 +39,23 @@ static struct sk_buff *trailer_rcv(struc
+@@ -33,12 +38,23 @@ static struct sk_buff *trailer_rcv(struc
return NULL;
trailer = skb_tail_pointer(skb) - 4;
--- a/drivers/net/ethernet/Kconfig
+++ b/drivers/net/ethernet/Kconfig
-@@ -163,6 +163,13 @@ source "drivers/net/ethernet/rdc/Kconfig
+@@ -166,6 +166,13 @@ source "drivers/net/ethernet/rdc/Kconfig
source "drivers/net/ethernet/realtek/Kconfig"
source "drivers/net/ethernet/renesas/Kconfig"
source "drivers/net/ethernet/rocker/Kconfig"
+
source "drivers/net/ethernet/samsung/Kconfig"
source "drivers/net/ethernet/seeq/Kconfig"
- source "drivers/net/ethernet/sfc/Kconfig"
+ source "drivers/net/ethernet/sgi/Kconfig"
--- a/drivers/net/ethernet/Makefile
+++ b/drivers/net/ethernet/Makefile
-@@ -75,6 +75,7 @@ obj-$(CONFIG_NET_VENDOR_REALTEK) += real
+@@ -77,6 +77,7 @@ obj-$(CONFIG_NET_VENDOR_REALTEK) += real
obj-$(CONFIG_NET_VENDOR_RENESAS) += renesas/
obj-$(CONFIG_NET_VENDOR_RDC) += rdc/
obj-$(CONFIG_NET_VENDOR_ROCKER) += rocker/
--- a/include/linux/phy.h
+++ b/include/linux/phy.h
-@@ -885,6 +885,10 @@ struct phy_driver {
+@@ -943,6 +943,10 @@ struct phy_driver {
int (*get_sqi)(struct phy_device *dev);
/** @get_sqi_max: Get the maximum signal quality indication */
int (*get_sqi_max)(struct phy_device *dev);
--- a/drivers/net/phy/phylink.c
+++ b/drivers/net/phy/phylink.c
-@@ -1449,6 +1449,11 @@ int phylink_ethtool_ksettings_set(struct
+@@ -1944,6 +1944,11 @@ int phylink_ethtool_ksettings_set(struct
* the presence of a PHY, this should not be changed as that
* should be determined from the media side advertisement.
*/
return phy_ethtool_ksettings_set(pl->phydev, kset);
}
-@@ -1750,8 +1755,11 @@ int phylink_ethtool_get_eee(struct phyli
+@@ -2247,8 +2252,11 @@ int phylink_ethtool_get_eee(struct phyli
ASSERT_RTNL();
return ret;
}
-@@ -1768,8 +1776,11 @@ int phylink_ethtool_set_eee(struct phyli
+@@ -2265,8 +2273,11 @@ int phylink_ethtool_set_eee(struct phyli
ASSERT_RTNL();
--- a/include/linux/phy.h
+++ b/include/linux/phy.h
-@@ -134,6 +134,7 @@ typedef enum {
+@@ -138,6 +138,7 @@ typedef enum {
PHY_INTERFACE_MODE_XGMII,
PHY_INTERFACE_MODE_XLGMII,
PHY_INTERFACE_MODE_MOCA,
PHY_INTERFACE_MODE_QSGMII,
PHY_INTERFACE_MODE_TRGMII,
PHY_INTERFACE_MODE_100BASEX,
-@@ -201,6 +202,8 @@ static inline const char *phy_modes(phy_
+@@ -243,6 +244,8 @@ static inline const char *phy_modes(phy_
return "xlgmii";
case PHY_INTERFACE_MODE_MOCA:
return "moca";
--- a/drivers/net/phy/Kconfig
+++ b/drivers/net/phy/Kconfig
-@@ -330,6 +330,12 @@ config REALTEK_PHY
+@@ -356,6 +356,12 @@ config REALTEK_PHY
help
Supports the Realtek 821x PHY.
help
--- a/drivers/net/phy/Makefile
+++ b/drivers/net/phy/Makefile
-@@ -89,6 +89,7 @@ obj-$(CONFIG_NATIONAL_PHY) += national.o
+@@ -93,6 +93,7 @@ obj-$(CONFIG_NXP_C45_TJA11XX_PHY) += nxp
obj-$(CONFIG_NXP_TJA11XX_PHY) += nxp-tja11xx.o
obj-$(CONFIG_QSEMI_PHY) += qsemi.o
obj-$(CONFIG_REALTEK_PHY) += realtek.o
--- a/include/linux/phy.h
+++ b/include/linux/phy.h
-@@ -233,7 +233,7 @@ static inline const char *phy_modes(phy_
+@@ -279,7 +279,7 @@ static inline const char *phy_modes(phy_
#define PHY_INIT_TIMEOUT 100000
#define PHY_FORCE_TIMEOUT 10
--- a/drivers/net/phy/sfp.c
+++ b/drivers/net/phy/sfp.c
-@@ -1966,6 +1966,13 @@ static void sfp_sm_module(struct sfp *sf
+@@ -2147,6 +2147,13 @@ static void sfp_sm_module(struct sfp *sf
return;
}
--- a/drivers/net/mdio/Kconfig
+++ b/drivers/net/mdio/Kconfig
-@@ -40,6 +40,17 @@ config MDIO_SUN4I
+@@ -54,6 +54,17 @@ config MDIO_SUN4I
interface units of the Allwinner SoC that have an EMAC (A10,
A12, A10s, etc.)
depends on ARCH_XGENE || COMPILE_TEST
--- a/drivers/net/mdio/Makefile
+++ b/drivers/net/mdio/Makefile
-@@ -17,6 +17,7 @@ obj-$(CONFIG_MDIO_MOXART) += mdio-moxar
+@@ -19,6 +19,7 @@ obj-$(CONFIG_MDIO_MOXART) += mdio-moxar
obj-$(CONFIG_MDIO_MSCC_MIIM) += mdio-mscc-miim.o
obj-$(CONFIG_MDIO_MVUSB) += mdio-mvusb.o
obj-$(CONFIG_MDIO_OCTEON) += mdio-octeon.o
--- a/drivers/net/phy/sfp.c
+++ b/drivers/net/phy/sfp.c
-@@ -413,32 +413,72 @@ static int sfp_i2c_write(struct sfp *sfp
+@@ -539,32 +539,72 @@ static int sfp_i2c_write(struct sfp *sfp
return ret == ARRAY_SIZE(msgs) ? len : 0;
}
--- a/drivers/net/phy/mdio_bus.c
+++ b/drivers/net/phy/mdio_bus.c
-@@ -734,6 +734,32 @@ out:
+@@ -737,6 +737,32 @@ out:
}
/**
* __mdiobus_read - Unlocked version of the mdiobus_read function
* @bus: the mii_bus struct
* @addr: the phy address
-@@ -749,7 +775,10 @@ int __mdiobus_read(struct mii_bus *bus,
+@@ -752,7 +778,10 @@ int __mdiobus_read(struct mii_bus *bus,
- WARN_ON_ONCE(!mutex_is_locked(&bus->mdio_lock));
+ lockdep_assert_held_once(&bus->mdio_lock);
- retval = bus->read(bus, addr, regnum);
+ if (bus->read_paged)
trace_mdio_access(bus, 1, addr, regnum, retval, retval);
mdiobus_stats_acct(&bus->stats[addr], true, retval);
-@@ -759,6 +788,40 @@ int __mdiobus_read(struct mii_bus *bus,
+@@ -762,6 +791,40 @@ int __mdiobus_read(struct mii_bus *bus,
EXPORT_SYMBOL(__mdiobus_read);
/**
* __mdiobus_write - Unlocked version of the mdiobus_write function
* @bus: the mii_bus struct
* @addr: the phy address
-@@ -775,7 +838,10 @@ int __mdiobus_write(struct mii_bus *bus,
+@@ -778,7 +841,10 @@ int __mdiobus_write(struct mii_bus *bus,
- WARN_ON_ONCE(!mutex_is_locked(&bus->mdio_lock));
+ lockdep_assert_held_once(&bus->mdio_lock);
- err = bus->write(bus, addr, regnum, val);
+ if (bus->write_paged)
trace_mdio_access(bus, 0, addr, regnum, val, err);
mdiobus_stats_acct(&bus->stats[addr], false, err);
-@@ -785,6 +851,39 @@ int __mdiobus_write(struct mii_bus *bus,
+@@ -788,6 +854,39 @@ int __mdiobus_write(struct mii_bus *bus,
EXPORT_SYMBOL(__mdiobus_write);
/**
* __mdiobus_modify_changed - Unlocked version of the mdiobus_modify function
* @bus: the mii_bus struct
* @addr: the phy address
-@@ -817,6 +916,43 @@ int __mdiobus_modify_changed(struct mii_
+@@ -820,6 +919,43 @@ int __mdiobus_modify_changed(struct mii_
EXPORT_SYMBOL_GPL(__mdiobus_modify_changed);
/**
* mdiobus_read_nested - Nested version of the mdiobus_read function
* @bus: the mii_bus struct
* @addr: the phy address
-@@ -842,6 +978,79 @@ int mdiobus_read_nested(struct mii_bus *
+@@ -845,6 +981,79 @@ int mdiobus_read_nested(struct mii_bus *
EXPORT_SYMBOL(mdiobus_read_nested);
/**
* mdiobus_read - Convenience function for reading a given MII mgmt register
* @bus: the mii_bus struct
* @addr: the phy address
-@@ -864,6 +1073,29 @@ int mdiobus_read(struct mii_bus *bus, in
+@@ -867,6 +1076,29 @@ int mdiobus_read(struct mii_bus *bus, in
EXPORT_SYMBOL(mdiobus_read);
/**
* mdiobus_write_nested - Nested version of the mdiobus_write function
* @bus: the mii_bus struct
* @addr: the phy address
-@@ -890,6 +1122,33 @@ int mdiobus_write_nested(struct mii_bus
+@@ -893,6 +1125,33 @@ int mdiobus_write_nested(struct mii_bus
EXPORT_SYMBOL(mdiobus_write_nested);
/**
* mdiobus_write - Convenience function for writing a given MII mgmt register
* @bus: the mii_bus struct
* @addr: the phy address
-@@ -913,6 +1172,30 @@ int mdiobus_write(struct mii_bus *bus, i
+@@ -916,6 +1175,30 @@ int mdiobus_write(struct mii_bus *bus, i
EXPORT_SYMBOL(mdiobus_write);
/**
* mdiobus_modify - Convenience function for modifying a given mdio device
* register
* @bus: the mii_bus struct
-@@ -934,6 +1217,51 @@ int mdiobus_modify(struct mii_bus *bus,
+@@ -937,6 +1220,51 @@ int mdiobus_modify(struct mii_bus *bus,
EXPORT_SYMBOL_GPL(mdiobus_modify);
/**
* @dev: target MDIO device
--- a/drivers/net/phy/phy-core.c
+++ b/drivers/net/phy/phy-core.c
-@@ -481,10 +481,16 @@ int __phy_read_mmd(struct phy_device *ph
+@@ -482,10 +482,16 @@ int __phy_read_mmd(struct phy_device *ph
struct mii_bus *bus = phydev->mdio.bus;
int phy_addr = phydev->mdio.addr;
}
return val;
}
-@@ -537,12 +543,18 @@ int __phy_write_mmd(struct phy_device *p
+@@ -538,12 +544,18 @@ int __phy_write_mmd(struct phy_device *p
struct mii_bus *bus = phydev->mdio.bus;
int phy_addr = phydev->mdio.addr;
}
return ret;
}
-@@ -748,6 +760,13 @@ EXPORT_SYMBOL_GPL(phy_modify_mmd);
+@@ -749,6 +761,13 @@ EXPORT_SYMBOL_GPL(phy_modify_mmd);
static int __phy_read_page(struct phy_device *phydev)
{
if (WARN_ONCE(!phydev->drv->read_page, "read_page callback not available, PHY driver not loaded?\n"))
return -EOPNOTSUPP;
-@@ -756,6 +775,13 @@ static int __phy_read_page(struct phy_de
+@@ -757,6 +776,13 @@ static int __phy_read_page(struct phy_de
static int __phy_write_page(struct phy_device *phydev, int page)
{
if (WARN_ONCE(!phydev->drv->write_page, "write_page callback not available, PHY driver not loaded?\n"))
return -EOPNOTSUPP;
-@@ -857,6 +883,18 @@ int phy_read_paged(struct phy_device *ph
+@@ -858,6 +884,18 @@ int phy_read_paged(struct phy_device *ph
{
int ret = 0, oldpage;
oldpage = phy_select_page(phydev, page);
if (oldpage >= 0)
ret = __phy_read(phydev, regnum);
-@@ -878,6 +916,18 @@ int phy_write_paged(struct phy_device *p
+@@ -879,6 +917,18 @@ int phy_write_paged(struct phy_device *p
{
int ret = 0, oldpage;
#define MII_DEVADDR_C45_SHIFT 16
#define MII_DEVADDR_C45_MASK GENMASK(20, 16)
#define MII_REGADDR_C45_MASK GENMASK(15, 0)
-@@ -327,11 +328,19 @@ static inline void mii_10gbt_stat_mod_li
+@@ -340,11 +341,19 @@ static inline void mii_10gbt_stat_mod_li
advertising, lpa & MDIO_AN_10GBT_STAT_LP10G);
}
int mdiobus_read(struct mii_bus *bus, int addr, u32 regnum);
int mdiobus_read_nested(struct mii_bus *bus, int addr, u32 regnum);
int mdiobus_write(struct mii_bus *bus, int addr, u32 regnum, u16 val);
-@@ -339,11 +348,51 @@ int mdiobus_write_nested(struct mii_bus
+@@ -352,11 +361,51 @@ int mdiobus_write_nested(struct mii_bus
int mdiobus_modify(struct mii_bus *bus, int addr, u32 regnum, u16 mask,
u16 set);
static inline u16 mdiobus_c45_regad(u32 regnum)
{
return FIELD_GET(MII_REGADDR_C45_MASK, regnum);
-@@ -367,6 +416,19 @@ static inline int __mdiobus_c45_write(st
+@@ -380,6 +429,19 @@ static inline int __mdiobus_c45_write(st
val);
}
#define MDIO_DEVICE_IS_PHY 0x80000000
/**
-@@ -374,6 +375,22 @@ struct mii_bus {
+@@ -420,6 +421,22 @@ struct mii_bus {
/** @shared: shared state across different PHYs */
struct phy_package_shared *shared[PHY_MAX_ADDR];
};
#define to_mii_bus(d) container_of(d, struct mii_bus, dev)
-@@ -1651,6 +1668,66 @@ static inline int __phy_package_read(str
+@@ -1754,6 +1771,66 @@ static inline int __phy_package_read(str
return __mdiobus_read(phydev->mdio.bus, shared->addr, regnum);
}
static inline int phy_package_write(struct phy_device *phydev,
u32 regnum, u16 val)
{
-@@ -1673,6 +1750,72 @@ static inline int __phy_package_write(st
+@@ -1776,6 +1853,72 @@ static inline int __phy_package_write(st
return __mdiobus_write(phydev->mdio.bus, shared->addr, regnum, val);
}
projects / openwrt / openwrt.git / commitdiff