// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-#include "qcom-ipq8062.dtsi"
+#include "qcom-ipq8062-smb208.dtsi"
#include <dt-bindings/input/input.h>
/delete-node/ &nand_pins;
};
};
+/* nand_pins are used for leds_pins, empty the node
+ * from ipq8064.dtsi
+ */
+&nand_pins {
+ /delete-property/ disable;
+ /delete-property/ pullups;
+ /delete-property/ hold;
+};
+
&qcom_pinmux {
pinctrl-0 = <&akro_pins>;
pinctrl-names = "default";
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0-only
-
-#include "qcom-ipq8064.dtsi"
-
-/ {
- model = "Qualcomm IPQ8062";
- compatible = "qcom,ipq8062", "qcom,ipq8064";
-
- aliases {
- serial0 = &gsbi4_serial;
- };
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-
- reserved-memory {
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
-
- rsvd@41200000 {
- reg = <0x41200000 0x300000>;
- no-map;
- };
- };
-};
-
-&gsbi4 {
- qcom,mode = <GSBI_PROT_I2C_UART>;
- status = "okay";
-
- serial@16340000 {
- status = "okay";
- };
- /*
- * The i2c device on gsbi4 should not be enabled.
- * On ipq806x designs gsbi4 i2c is meant for exclusive
- * RPM usage. Turning this on in kernel manifests as
- * i2c failure for the RPM.
- */
-};
-
-&opp_table0 {
- /delete-node/opp-1200000000;
- /delete-node/opp-1400000000;
-
- /*
- * Voltage thresholds are <target min max>
- */
- opp-384000000 {
- opp-microvolt-speed0-pvs0-v0 = <1000000 950000 1050000>;
- opp-microvolt-speed0-pvs1-v0 = < 925000 878750 971250>;
- opp-microvolt-speed0-pvs2-v0 = < 875000 831250 918750>;
- opp-microvolt-speed0-pvs3-v0 = < 800000 760000 840000>;
- };
-
- opp-600000000 {
- opp-microvolt-speed0-pvs0-v0 = <1050000 997500 1102500>;
- opp-microvolt-speed0-pvs1-v0 = < 975000 926250 1023750>;
- opp-microvolt-speed0-pvs2-v0 = < 925000 878750 971250>;
- opp-microvolt-speed0-pvs3-v0 = < 850000 807500 892500>;
- };
-
- opp-800000000 {
- opp-microvolt-speed0-pvs0-v0 = <1100000 1045000 1155000>;
- opp-microvolt-speed0-pvs1-v0 = <1025000 973750 1076250>;
- opp-microvolt-speed0-pvs2-v0 = < 995000 945250 1044750>;
- opp-microvolt-speed0-pvs3-v0 = < 900000 855000 945000>;
- };
-
- opp-1000000000 {
- opp-microvolt-speed0-pvs0-v0 = <1150000 1092500 1207500>;
- opp-microvolt-speed0-pvs1-v0 = <1075000 1021250 1128750>;
- opp-microvolt-speed0-pvs2-v0 = <1025000 973750 1076250>;
- opp-microvolt-speed0-pvs3-v0 = < 950000 902500 997500>;
- };
-};
-
-&pcie0 {
- compatible = "qcom,pcie-ipq8064-v2";
-};
-
-&pcie1 {
- compatible = "qcom,pcie-ipq8064-v2";
-};
-
-&pcie2 {
- compatible = "qcom,pcie-ipq8064-v2";
-};
-
-&smb208_s2a {
- regulator-max-microvolt = <1150000>;
-};
-
-&smb208_s2b {
- regulator-max-microvolt = <1150000>;
-};
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-#include "qcom-ipq8064-v2.0.dtsi"
+#include "qcom-ipq8064-v2.0-smb208.dtsi"
#include <dt-bindings/input/input.h>
&nand {
status = "okay";
- pinctrl-0 = <&nand_pins>;
- pinctrl-names = "default";
-
nand@0 {
reg = <0>;
compatible = "qcom,nandcs";
};
&qcom_pinmux {
- rgmii2_pins: rgmii2_pins {
+ rgmii2_pins: rgmii2-pins {
mux {
pins = "gpio27", "gpio28", "gpio29",
"gpio30", "gpio31", "gpio32",
&nand {
status = "okay";
- pinctrl-0 = <&nand_pins>;
- pinctrl-names = "default";
-
nand@0 {
reg = <0>;
compatible = "qcom,nandcs";
-#include "qcom-ipq8064-v2.0.dtsi"
+#include "qcom-ipq8064-v2.0-smb208.dtsi"
#include <dt-bindings/input/input.h>
&nand {
status = "okay";
- pinctrl-0 = <&nand_pins>;
- pinctrl-names = "default";
-
- #address-cells = <1>;
- #size-cells = <0>;
-
nand@0 {
reg = <0>;
compatible = "qcom,nandcs";
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-#include "qcom-ipq8064-v2.0.dtsi"
+#include "qcom-ipq8064-v2.0-smb208.dtsi"
#include <dt-bindings/input/input.h>
&nand {
status = "okay";
- pinctrl-0 = <&nand_pins>;
- pinctrl-names = "default";
-
nand@0 {
reg = <0>;
compatible = "qcom,nandcs";
// SPDX-License-Identifier: GPL-2.0
-#include "qcom-ipq8064-v2.0.dtsi"
+#include "qcom-ipq8064-v2.0-smb208.dtsi"
#include <dt-bindings/input/input.h>
#include <dt-bindings/soc/qcom,tcsr.h>
pinctrl-0 = <&mdio0_pins>;
pinctrl-names = "default";
- ethernet-phy@0 {
- reg = <0>;
- qca,ar8327-initvals = <
- 0x00004 0x7600000 /* PAD0_MODE */
- 0x00008 0x1000000 /* PAD5_MODE */
- 0x0000c 0x80 /* PAD6_MODE */
- 0x000e4 0x6a545 /* MAC_POWER_SEL */
- 0x000e0 0xc74164de /* SGMII_CTRL */
- 0x0007c 0x4e /* PORT0_STATUS */
- 0x00094 0x4e /* PORT6_STATUS */
- >;
+ switch@10 {
+ compatible = "qca,qca8337";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x10>;
+
+ qca8k,rgmii56_1_8v;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ label = "cpu";
+ ethernet = <&gmac1>;
+ phy-mode = "rgmii-id";
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ label = "lan1";
+ };
+
+ port@2 {
+ reg = <2>;
+ label = "lan2";
+ };
+
+ port@3 {
+ reg = <3>;
+ label = "lan3";
+ };
+
+ port@4 {
+ reg = <4>;
+ label = "lan4";
+ };
+
+ port@5 {
+ reg = <5>;
+ label = "wan";
+ };
+
+ /*
+ port@6 {
+ reg = <0>;
+ label = "cpu";
+ ethernet = <&gmac2>;
+ phy-mode = "rgmii";
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ pause;
+ asym-pause;
+ };
+ };
+ */
+ };
};
};
&nand {
status = "okay";
- pinctrl-0 = <&nand_pins>;
- pinctrl-names = "default";
-
nand@0 {
reg = <0>;
compatible = "qcom,nandcs";
&nand {
status = "okay";
- pinctrl-0 = <&nand_pins>;
- pinctrl-names = "default";
-
nand@0 {
reg = <0>;
compatible = "qcom,nandcs";
-#include "qcom-ipq8064-v2.0.dtsi"
+#include "qcom-ipq8064-v2.0-smb208.dtsi"
#include <dt-bindings/input/input.h>
&nand {
status = "okay";
- pinctrl-0 = <&nand_pins>;
- pinctrl-names = "default";
-
nand@0 {
reg = <0>;
compatible = "qcom,nandcs";
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-#include "qcom-ipq8064-v2.0.dtsi"
+#include "qcom-ipq8064-v2.0-smb208.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
&nand {
status = "okay";
- pinctrl-0 = <&nand_pins>;
- pinctrl-names = "default";
nand-ecc-strength = <4>;
nand-bus-width = <8>;
};
+++ /dev/null
-#include "qcom-ipq8064.dtsi"
-
-/ {
- aliases {
- serial0 = &gsbi4_serial;
- };
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-
- reserved-memory {
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
-
- rsvd@41200000 {
- reg = <0x41200000 0x300000>;
- no-map;
- };
- };
-};
-
-&gsbi4 {
- qcom,mode = <GSBI_PROT_I2C_UART>;
- status = "okay";
-
- serial@16340000 {
- status = "okay";
- };
- /*
- * The i2c device on gsbi4 should not be enabled.
- * On ipq806x designs gsbi4 i2c is meant for exclusive
- * RPM usage. Turning this on in kernel manifests as
- * i2c failure for the RPM.
- */
-};
-
-&CPU_SPC {
- status = "okay";
-};
-
-&pcie0 {
- compatible = "qcom,pcie-ipq8064-v2";
-};
-
-&pcie1 {
- compatible = "qcom,pcie-ipq8064-v2";
-};
-
-&pcie2 {
- compatible = "qcom,pcie-ipq8064-v2";
-};
-
-&sata {
- ports-implemented = <0x1>;
-};
-
-&ss_phy_0 {
- qcom,rx-eq = <2>;
- qcom,tx-deamp_3_5db = <32>;
- qcom,mpll = <5>;
-};
-
-&ss_phy_1 {
- qcom,rx-eq = <2>;
- qcom,tx-deamp_3_5db = <32>;
- qcom,mpll = <5>;
-};
-#include "qcom-ipq8064-v2.0.dtsi"
+#include "qcom-ipq8064-v2.0-smb208.dtsi"
#include <dt-bindings/input/input.h>
-#include "qcom-ipq8064-v2.0.dtsi"
+#include "qcom-ipq8064-v2.0-smb208.dtsi"
#include <dt-bindings/input/input.h>
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-#include "qcom-ipq8064-v2.0.dtsi"
+#include "qcom-ipq8064-v2.0-smb208.dtsi"
#include <dt-bindings/input/input.h>
&nand {
status = "okay";
- pinctrl-0 = <&nand_pins>;
- pinctrl-names = "default";
-
cs@0 {
reg = <0>;
compatible = "qcom,nandcs";
-#include "qcom-ipq8065.dtsi"
+#include "qcom-ipq8065-smb208.dtsi"
#include <dt-bindings/input/input.h>
};
};
- mdio0_pins: mdio0_pins {
+ mdio0_pins: mdio0-pins {
clk {
pins = "gpio1";
input-disable;
};
};
- rgmii2_pins: rgmii2_pins {
+ rgmii2_pins: rgmii2-pins {
tx {
pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32" ;
input-disable;
-#include "qcom-ipq8065.dtsi"
+#include "qcom-ipq8065-smb208.dtsi"
#include <dt-bindings/input/input.h>
};
};
- mdio0_pins: mdio0_pins {
+ mdio0_pins: mdio0-pins {
clk {
pins = "gpio1";
input-disable;
};
};
- rgmii2_pins: rgmii2_pins {
+ rgmii2_pins: rgmii2-pins {
tx {
pins = "gpio27", "gpio28", "gpio29",
"gpio30", "gpio31", "gpio32";
&nand {
status = "okay";
- pinctrl-0 = <&nand_pins>;
- pinctrl-names = "default";
-
nand@0 {
reg = <0>;
compatible = "qcom,nandcs";
// SPDX-License-Identifier: GPL-2.0-or-later
-#include "qcom-ipq8065.dtsi"
+#include "qcom-ipq8065-smb208.dtsi"
#include <dt-bindings/input/input.h>
/ {
};
};
- rgmii2_pins: rgmii2_pins {
+ rgmii2_pins: rgmii2-pins {
mux {
pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31",
"gpio51", "gpio52", "gpio59", "gpio60", "gpio61", "gpio62";
&nand {
status = "okay";
- pinctrl-0 = <&nand_pins>;
- pinctrl-names = "default";
-
nand@0 {
reg = <0>;
compatible = "qcom,nandcs";
// SPDX-License-Identifier: GPL-2.0-or-later
-#include "qcom-ipq8065.dtsi"
+#include "qcom-ipq8065-smb208.dtsi"
#include <dt-bindings/input/input.h>
/ {
};
};
- rgmii2_pins: rgmii2_pins {
+ rgmii2_pins: rgmii2-pins {
tx {
pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32";
input-disable;
&nand {
status = "okay";
- pinctrl-0 = <&nand_pins>;
- pinctrl-names = "default";
-
nand@0 {
reg = <0>;
compatible = "qcom,nandcs";
+++ /dev/null
-#include "qcom-ipq8064.dtsi"
-
-/ {
- model = "Qualcomm IPQ8065";
- compatible = "qcom,ipq8065", "qcom,ipq8064";
-
- aliases {
- serial0 = &gsbi4_serial;
- };
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-
- reserved-memory {
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
-
- rsvd@41200000 {
- reg = <0x41200000 0x300000>;
- no-map;
- };
- };
-};
-
-&gsbi4 {
- qcom,mode = <GSBI_PROT_I2C_UART>;
- status = "okay";
-
- serial@16340000 {
- status = "okay";
- };
- /*
- * The i2c device on gsbi4 should not be enabled.
- * On ipq806x designs gsbi4 i2c is meant for exclusive
- * RPM usage. Turning this on in kernel manifests as
- * i2c failure for the RPM.
- */
-};
-
-&pcie0 {
- compatible = "qcom,pcie-ipq8064-v2";
-};
-
-&pcie1 {
- compatible = "qcom,pcie-ipq8064-v2";
-};
-
-&pcie2 {
- compatible = "qcom,pcie-ipq8064-v2";
-};
-
-&sata {
- ports-implemented = <0x1>;
-};
-
-&smb208_s2a {
- regulator-min-microvolt = <775000>;
- regulator-max-microvolt = <1275000>;
-};
-
-&smb208_s2b {
- regulator-min-microvolt = <775000>;
- regulator-max-microvolt = <1275000>;
-};
-
-&ss_phy_0 {
- qcom,rx-eq = <2>;
- qcom,tx-deamp_3_5db = <32>;
- qcom,mpll = <5>;
-};
-
-&ss_phy_1 {
- qcom,rx-eq = <2>;
- qcom,tx-deamp_3_5db = <32>;
- qcom,mpll = <5>;
-};
-
-&opp_table_l2 {
- /delete-node/opp-1200000000;
-
- opp-1400000000 {
- opp-hz = /bits/ 64 <1400000000>;
- opp-microvolt = <1150000>;
- clock-latency-ns = <100000>;
- opp-level = <2>;
- };
-};
-
-&opp_table0 {
- /*
- * On ipq8065 1.2 ghz freq is not present
- * Remove it to make cpufreq work and not
- * complain for missing definition
- */
-
- /delete-node/opp-1200000000;
-
- /*
- * Voltage thresholds are <target min max>
- */
- opp-384000000 {
- opp-microvolt-speed0-pvs0-v0 = <975000 926250 1023750>;
- opp-microvolt-speed0-pvs1-v0 = <950000 902500 997500>;
- opp-microvolt-speed0-pvs2-v0 = <925000 878750 971250>;
- opp-microvolt-speed0-pvs3-v0 = <900000 855000 945000>;
- opp-microvolt-speed0-pvs4-v0 = <875000 831250 918750>;
- opp-microvolt-speed0-pvs5-v0 = <825000 783750 866250>;
- opp-microvolt-speed0-pvs6-v0 = <775000 736250 813750>;
- };
-
- opp-600000000 {
- opp-microvolt-speed0-pvs0-v0 = <1000000 950000 1050000>;
- opp-microvolt-speed0-pvs1-v0 = <975000 926250 1023750>;
- opp-microvolt-speed0-pvs2-v0 = <950000 902500 997500>;
- opp-microvolt-speed0-pvs3-v0 = <925000 878750 971250>;
- opp-microvolt-speed0-pvs4-v0 = <900000 855000 945000>;
- opp-microvolt-speed0-pvs5-v0 = <850000 807500 892500>;
- opp-microvolt-speed0-pvs6-v0 = <800000 760000 840000>;
- };
-
- opp-800000000 {
- opp-microvolt-speed0-pvs0-v0 = <1050000 997500 1102500>;
- opp-microvolt-speed0-pvs1-v0 = <1025000 973750 1076250>;
- opp-microvolt-speed0-pvs2-v0 = <1000000 950000 1050000>;
- opp-microvolt-speed0-pvs3-v0 = <975000 926250 1023750>;
- opp-microvolt-speed0-pvs4-v0 = <950000 902500 997500>;
- opp-microvolt-speed0-pvs5-v0 = <900000 855000 945000>;
- opp-microvolt-speed0-pvs6-v0 = <850000 807500 892500>;
- };
-
- opp-1000000000 {
- opp-microvolt-speed0-pvs0-v0 = <1100000 1045000 1155000>;
- opp-microvolt-speed0-pvs1-v0 = <1075000 1021250 1128750>;
- opp-microvolt-speed0-pvs2-v0 = <1050000 997500 1102500>;
- opp-microvolt-speed0-pvs3-v0 = <1025000 973750 1076250>;
- opp-microvolt-speed0-pvs4-v0 = <1000000 950000 1050000>;
- opp-microvolt-speed0-pvs5-v0 = <950000 902500 997500>;
- opp-microvolt-speed0-pvs6-v0 = <900000 855000 945000>;
- };
-
- opp-1400000000 {
- opp-microvolt-speed0-pvs0-v0 = <1175000 1116250 1233750>;
- opp-microvolt-speed0-pvs1-v0 = <1150000 1092500 1207500>;
- opp-microvolt-speed0-pvs2-v0 = <1125000 1068750 1181250>;
- opp-microvolt-speed0-pvs3-v0 = <1100000 1045000 1155000>;
- opp-microvolt-speed0-pvs4-v0 = <1075000 1021250 1128750>;
- opp-microvolt-speed0-pvs5-v0 = <1025000 973750 1076250>;
- opp-microvolt-speed0-pvs6-v0 = <975000 926250 1023750>;
- opp-level = <1>;
- };
-
- opp-1725000000 {
- opp-hz = /bits/ 64 <1725000000>;
- opp-microvolt-speed0-pvs0-v0 = <1262500 1199375 1325625>;
- opp-microvolt-speed0-pvs1-v0 = <1225000 1163750 1286250>;
- opp-microvolt-speed0-pvs2-v0 = <1200000 1140000 1260000>;
- opp-microvolt-speed0-pvs3-v0 = <1175000 1116250 1233750>;
- opp-microvolt-speed0-pvs4-v0 = <1150000 1092500 1207500>;
- opp-microvolt-speed0-pvs5-v0 = <1100000 1045000 1155000>;
- opp-microvolt-speed0-pvs6-v0 = <1050000 997500 1102500>;
- opp-supported-hw = <0x1>;
- clock-latency-ns = <100000>;
- opp-level = <2>;
- };
-};
// SPDX-License-Identifier: GPL-2.0 OR MIT
-#include "qcom-ipq8064-v2.0.dtsi"
+#include "qcom-ipq8064-v2.0-smb208.dtsi"
/ {
memory {
&nand {
status = "okay";
- pinctrl-0 = <&nand_pins>;
- pinctrl-names = "default";
-
nand@0 {
compatible = "qcom,nandcs";
-#include "qcom-ipq8064-v2.0.dtsi"
+#include "qcom-ipq8064-v2.0-smb208.dtsi"
#include <dt-bindings/input/input.h>
#include <dt-bindings/soc/qcom,tcsr.h>
&nand {
status = "okay";
- pinctrl-0 = <&nand_pins>;
- pinctrl-names = "default";
-
nand@0 {
compatible = "qcom,nandcs";
+++ /dev/null
---- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
-+++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
-@@ -352,6 +352,7 @@
- gpio-ranges = <&qcom_pinmux 0 0 69>;
- #gpio-cells = <2>;
- interrupt-controller;
-+ #address-cells = <0>;
- #interrupt-cells = <2>;
- interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
-
-@@ -379,6 +380,7 @@
- function = "pcie3_rst";
- drive-strength = <12>;
- bias-disable;
-+ output-low;
- };
- };
-
-@@ -411,12 +413,9 @@
- };
-
- nand_pins: nand_pins {
-- mux {
-+ disable {
- pins = "gpio34", "gpio35", "gpio36",
-- "gpio37", "gpio38", "gpio39",
-- "gpio40", "gpio41", "gpio42",
-- "gpio43", "gpio44", "gpio45",
-- "gpio46", "gpio47";
-+ "gpio37", "gpio38";
- function = "nand";
- drive-strength = <10>;
- bias-disable;
-@@ -424,6 +423,8 @@
-
- pullups {
- pins = "gpio39";
-+ function = "nand";
-+ drive-strength = <10>;
- bias-pull-up;
- };
-
-@@ -431,6 +432,8 @@
- pins = "gpio40", "gpio41", "gpio42",
- "gpio43", "gpio44", "gpio45",
- "gpio46", "gpio47";
-+ function = "nand";
-+ drive-strength = <10>;
- bias-bus-hold;
- };
- };
-@@ -439,6 +442,7 @@
- intc: interrupt-controller@2000000 {
- compatible = "qcom,msm-qgic2";
- interrupt-controller;
-+ #address-cells = <0>;
- #interrupt-cells = <3>;
- reg = <0x02000000 0x1000>,
- <0x02002000 0x1000>;
-@@ -468,11 +472,13 @@
- acc0: clock-controller@2088000 {
- compatible = "qcom,kpss-acc-v1";
- reg = <0x02088000 0x1000>, <0x02008000 0x1000>;
-+ clock-output-names = "acpu0_aux";
- };
-
- acc1: clock-controller@2098000 {
- compatible = "qcom,kpss-acc-v1";
- reg = <0x02098000 0x1000>, <0x02008000 0x1000>;
-+ clock-output-names = "acpu1_aux";
- };
-
- adm_dma: dma-controller@18300000 {
-@@ -496,13 +502,13 @@
- };
-
- saw0: regulator@2089000 {
-- compatible = "qcom,saw2";
-+ compatible = "qcom,saw2", "qcom,apq8064-saw2-v1.1-cpu", "syscon";
- reg = <0x02089000 0x1000>, <0x02009000 0x1000>;
- regulator;
- };
-
- saw1: regulator@2099000 {
-- compatible = "qcom,saw2";
-+ compatible = "qcom,saw2", "qcom,apq8064-saw2-v1.1-cpu", "syscon";
- reg = <0x02099000 0x1000>, <0x02009000 0x1000>;
- regulator;
- };
-@@ -530,7 +536,7 @@
- status = "disabled";
- };
-
-- i2c@124a0000 {
-+ gsbi2_i2c: i2c@124a0000 {
- compatible = "qcom,i2c-qup-v1.1.1";
- reg = <0x124a0000 0x1000>;
- interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>;
-@@ -676,9 +682,6 @@
- compatible = "qcom,ipq806x-nand";
- reg = <0x1ac00000 0x800>;
-
-- pinctrl-0 = <&nand_pins>;
-- pinctrl-names = "default";
--
- clocks = <&gcc EBI2_CLK>,
- <&gcc EBI2_AON_CLK>;
- clock-names = "core", "aon";
-@@ -733,10 +736,13 @@
- tsens_calib_backup: calib_backup@410 {
- reg = <0x410 0xb>;
- };
-+ speedbin_efuse: speedbin@0c0 {
-+ reg = <0x0c0 0x4>;
-+ };
- };
-
- gcc: clock-controller@900000 {
-- compatible = "qcom,gcc-ipq8064";
-+ compatible = "qcom,gcc-ipq8064", "syscon";
- reg = <0x00900000 0x4000>;
- #clock-cells = <1>;
- #reset-cells = <1>;
-@@ -768,10 +774,45 @@
- clocks = <&gcc RPM_MSG_RAM_H_CLK>;
- clock-names = "ram";
-
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
- rpmcc: clock-controller {
- compatible = "qcom,rpmcc-ipq806x", "qcom,rpmcc";
- #clock-cells = <1>;
- };
-+
-+ regulators {
-+ compatible = "qcom,rpm-smb208-regulators";
-+
-+ smb208_s1a: s1a {
-+ regulator-min-microvolt = <1050000>;
-+ regulator-max-microvolt = <1150000>;
-+
-+ qcom,switch-mode-frequency = <1200000>;
-+ };
-+
-+ smb208_s1b: s1b {
-+ regulator-min-microvolt = <1050000>;
-+ regulator-max-microvolt = <1150000>;
-+
-+ qcom,switch-mode-frequency = <1200000>;
-+ };
-+
-+ smb208_s2a: s2a {
-+ regulator-min-microvolt = < 800000>;
-+ regulator-max-microvolt = <1250000>;
-+
-+ qcom,switch-mode-frequency = <1200000>;
-+ };
-+
-+ smb208_s2b: s2b {
-+ regulator-min-microvolt = < 800000>;
-+ regulator-max-microvolt = <1250000>;
-+
-+ qcom,switch-mode-frequency = <1200000>;
-+ };
-+ };
- };
-
- tcsr: syscon@1a400000 {
-@@ -965,7 +1006,7 @@
-
- gmac0: ethernet@37000000 {
- device_type = "network";
-- compatible = "qcom,ipq806x-gmac";
-+ compatible = "qcom,ipq806x-gmac", "snps,dwmac";
- reg = <0x37000000 0x200000>;
- interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "macirq";
-@@ -989,7 +1030,7 @@
-
- gmac1: ethernet@37200000 {
- device_type = "network";
-- compatible = "qcom,ipq806x-gmac";
-+ compatible = "qcom,ipq806x-gmac", "snps,dwmac";
- reg = <0x37200000 0x200000>;
- interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "macirq";
-@@ -1013,7 +1054,7 @@
-
- gmac2: ethernet@37400000 {
- device_type = "network";
-- compatible = "qcom,ipq806x-gmac";
-+ compatible = "qcom,ipq806x-gmac", "snps,dwmac";
- reg = <0x37400000 0x200000>;
- interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "macirq";
-@@ -1037,7 +1078,7 @@
-
- gmac3: ethernet@37600000 {
- device_type = "network";
-- compatible = "qcom,ipq806x-gmac";
-+ compatible = "qcom,ipq806x-gmac", "snps,dwmac";
- reg = <0x37600000 0x200000>;
- interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "macirq";
-@@ -1065,8 +1106,6 @@
- clocks = <&gcc USB30_0_UTMI_CLK>;
- clock-names = "ref";
- #phy-cells = <0>;
--
-- status = "disabled";
- };
-
- ss_phy_0: phy@100f8830 {
-@@ -1075,8 +1114,6 @@
- clocks = <&gcc USB30_0_MASTER_CLK>;
- clock-names = "ref";
- #phy-cells = <0>;
--
-- status = "disabled";
- };
-
- usb3_0: usb3@100f8800 {
-@@ -1176,7 +1213,7 @@
- };
-
- amba: amba {
-- compatible = "simple-bus";
-+ compatible = "arm,amba-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
-@@ -1195,7 +1232,6 @@
- non-removable;
- cap-sd-highspeed;
- cap-mmc-highspeed;
-- mmc-ddr-1_8v;
- vmmc-supply = <&vsdcc_fixed>;
- dmas = <&sdcc1bam 2>, <&sdcc1bam 1>;
- dma-names = "tx", "rx";
+++ /dev/null
---- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
-+++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
-@@ -10,6 +10,8 @@
- #include <dt-bindings/reset/qcom,gcc-ipq806x.h>
- #include <dt-bindings/soc/qcom,gsbi.h>
- #include <dt-bindings/interrupt-controller/arm-gic.h>
-+#include <dt-bindings/mfd/qcom-rpm.h>
-+#include <dt-bindings/clock/qcom,rpmcc.h>
-
- / {
- #address-cells = <1>;
-@@ -30,6 +32,16 @@
- next-level-cache = <&L2>;
- qcom,acc = <&acc0>;
- qcom,saw = <&saw0>;
-+ clocks = <&kraitcc 0>, <&kraitcc 4>;
-+ clock-names = "cpu", "l2";
-+ clock-latency = <100000>;
-+ cpu-supply = <&smb208_s2a>;
-+ operating-points-v2 = <&opp_table0>;
-+ voltage-tolerance = <5>;
-+ cooling-min-state = <0>;
-+ cooling-max-state = <10>;
-+ #cooling-cells = <2>;
-+ cpu-idle-states = <&CPU_SPC>;
- };
-
- cpu1: cpu@1 {
-@@ -40,11 +52,125 @@
- next-level-cache = <&L2>;
- qcom,acc = <&acc1>;
- qcom,saw = <&saw1>;
-+ clocks = <&kraitcc 1>, <&kraitcc 4>;
-+ clock-names = "cpu", "l2";
-+ clock-latency = <100000>;
-+ cpu-supply = <&smb208_s2b>;
-+ operating-points-v2 = <&opp_table0>;
-+ voltage-tolerance = <5>;
-+ cooling-min-state = <0>;
-+ cooling-max-state = <10>;
-+ #cooling-cells = <2>;
-+ cpu-idle-states = <&CPU_SPC>;
-+ };
-+
-+ idle-states {
-+ CPU_SPC: spc {
-+ compatible = "qcom,idle-state-spc";
-+ status = "disabled";
-+ entry-latency-us = <400>;
-+ exit-latency-us = <900>;
-+ min-residency-us = <3000>;
-+ };
- };
-+ };
-
-- L2: l2-cache {
-- compatible = "cache";
-- cache-level = <2>;
-+ opp_table_l2: opp_table_l2 {
-+ compatible = "operating-points-v2";
-+
-+ opp-384000000 {
-+ opp-hz = /bits/ 64 <384000000>;
-+ opp-microvolt = <1100000>;
-+ clock-latency-ns = <100000>;
-+ opp-level = <0>;
-+ };
-+
-+ opp-1000000000 {
-+ opp-hz = /bits/ 64 <1000000000>;
-+ opp-microvolt = <1100000>;
-+ clock-latency-ns = <100000>;
-+ opp-level = <1>;
-+ };
-+
-+ opp-1200000000 {
-+ opp-hz = /bits/ 64 <1200000000>;
-+ opp-microvolt = <1150000>;
-+ clock-latency-ns = <100000>;
-+ opp-level = <2>;
-+ };
-+ };
-+
-+ opp_table0: opp_table0 {
-+ compatible = "operating-points-v2-kryo-cpu";
-+ nvmem-cells = <&speedbin_efuse>;
-+
-+ /*
-+ * Voltage thresholds are <target min max>
-+ */
-+ opp-384000000 {
-+ opp-hz = /bits/ 64 <384000000>;
-+ opp-microvolt-speed0-pvs0-v0 = <1000000 950000 1050000>;
-+ opp-microvolt-speed0-pvs1-v0 = <925000 878750 971250>;
-+ opp-microvolt-speed0-pvs2-v0 = <875000 831250 918750>;
-+ opp-microvolt-speed0-pvs3-v0 = <800000 760000 840000>;
-+ opp-supported-hw = <0x1>;
-+ clock-latency-ns = <100000>;
-+ opp-level = <0>;
-+ };
-+
-+ opp-600000000 {
-+ opp-hz = /bits/ 64 <600000000>;
-+ opp-microvolt-speed0-pvs0-v0 = <1050000 997500 1102500>;
-+ opp-microvolt-speed0-pvs1-v0 = <975000 926250 1023750>;
-+ opp-microvolt-speed0-pvs2-v0 = <925000 878750 971250>;
-+ opp-microvolt-speed0-pvs3-v0 = <850000 807500 892500>;
-+ opp-supported-hw = <0x1>;
-+ clock-latency-ns = <100000>;
-+ opp-level = <1>;
-+ };
-+
-+ opp-800000000 {
-+ opp-hz = /bits/ 64 <800000000>;
-+ opp-microvolt-speed0-pvs0-v0 = <1100000 1045000 1155000>;
-+ opp-microvolt-speed0-pvs1-v0 = <1025000 973750 1076250>;
-+ opp-microvolt-speed0-pvs2-v0 = <995000 945250 1044750>;
-+ opp-microvolt-speed0-pvs3-v0 = <900000 855000 945000>;
-+ opp-supported-hw = <0x1>;
-+ clock-latency-ns = <100000>;
-+ opp-level = <1>;
-+ };
-+
-+ opp-1000000000 {
-+ opp-hz = /bits/ 64 <1000000000>;
-+ opp-microvolt-speed0-pvs0-v0 = <1150000 1092500 1207500>;
-+ opp-microvolt-speed0-pvs1-v0 = <1075000 1021250 1128750>;
-+ opp-microvolt-speed0-pvs2-v0 = <1025000 973750 1076250>;
-+ opp-microvolt-speed0-pvs3-v0 = <950000 902500 997500>;
-+ opp-supported-hw = <0x1>;
-+ clock-latency-ns = <100000>;
-+ opp-level = <1>;
-+ };
-+
-+ opp-1200000000 {
-+ opp-hz = /bits/ 64 <1200000000>;
-+ opp-microvolt-speed0-pvs0-v0 = <1200000 1140000 1260000>;
-+ opp-microvolt-speed0-pvs1-v0 = <1125000 1068750 1181250>;
-+ opp-microvolt-speed0-pvs2-v0 = <1075000 1021250 1128750>;
-+ opp-microvolt-speed0-pvs3-v0 = <1000000 950000 1050000>;
-+ opp-supported-hw = <0x1>;
-+ clock-latency-ns = <100000>;
-+ opp-level = <2>;
-+ };
-+
-+ opp-1400000000 {
-+ opp-hz = /bits/ 64 <1400000000>;
-+ opp-microvolt-speed0-pvs0-v0 = <1250000 1187500 1312500>;
-+ opp-microvolt-speed0-pvs1-v0 = <1175000 1116250 1233750>;
-+ opp-microvolt-speed0-pvs2-v0 = <1125000 1068750 1181250>;
-+ opp-microvolt-speed0-pvs3-v0 = <1050000 997500 1102500>;
-+ opp-supported-hw = <0x1>;
-+ clock-latency-ns = <100000>;
-+ opp-level = <2>;
- };
- };
-
-@@ -317,6 +443,15 @@
- };
- };
-
-+ fab-scaling {
-+ compatible = "qcom,fab-scaling";
-+ clocks = <&rpmcc RPM_APPS_FABRIC_A_CLK>, <&rpmcc RPM_EBI1_A_CLK>;
-+ clock-names = "apps-fab-clk", "ddr-fab-clk";
-+ fab_freq_high = <533000000>;
-+ fab_freq_nominal = <400000000>;
-+ cpu_freq_threshold = <1000000000>;
-+ };
-+
- firmware {
- scm {
- compatible = "qcom,scm-ipq806x", "qcom,scm";
-@@ -384,6 +519,15 @@
- };
- };
-
-+ i2c4_pins: i2c4_pinmux {
-+ mux {
-+ pins = "gpio12", "gpio13";
-+ function = "gsbi4";
-+ drive-strength = <12>;
-+ bias-disable;
-+ };
-+ };
-+
- spi_pins: spi_pins {
- mux {
- pins = "gpio18", "gpio19", "gpio21";
-@@ -437,6 +581,27 @@
- bias-bus-hold;
- };
- };
-+
-+ mdio0_pins: mdio0_pins {
-+ mux {
-+ pins = "gpio0", "gpio1";
-+ function = "mdio";
-+ drive-strength = <8>;
-+ bias-disable;
-+ };
-+ };
-+
-+ rgmii2_pins: rgmii2_pins {
-+ mux {
-+ pins = "gpio27", "gpio28", "gpio29",
-+ "gpio30", "gpio31", "gpio32",
-+ "gpio51", "gpio52", "gpio59",
-+ "gpio60", "gpio61", "gpio62";
-+ function = "rgmii2";
-+ drive-strength = <8>;
-+ bias-disable;
-+ };
-+ };
- };
-
- intc: interrupt-controller@2000000 {
-@@ -513,6 +678,17 @@
- regulator;
- };
-
-+ saw_l2: regulator@02012000 {
-+ compatible = "qcom,saw2", "syscon";
-+ reg = <0x02012000 0x1000>;
-+ regulator;
-+ };
-+
-+ sic_non_secure: sic-non-secure@12100000 {
-+ compatible = "syscon";
-+ reg = <0x12100000 0x10000>;
-+ };
-+
- gsbi2: gsbi@12480000 {
- compatible = "qcom,gsbi-v1.0.0";
- cell-index = <2>;
-@@ -637,6 +813,33 @@
- };
- };
-
-+ gsbi6: gsbi@16500000 {
-+ status = "disabled";
-+ compatible = "qcom,gsbi-v1.0.0";
-+ cell-index = <6>;
-+ reg = <0x16500000 0x100>;
-+ clocks = <&gcc GSBI6_H_CLK>;
-+ clock-names = "iface";
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+ ranges;
-+
-+ syscon-tcsr = <&tcsr>;
-+
-+ gsbi6_i2c: i2c@16580000 {
-+ compatible = "qcom,i2c-qup-v1.1.1";
-+ reg = <0x16580000 0x1000>;
-+ interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>;
-+
-+ clocks = <&gcc GSBI6_QUP_CLK>, <&gcc GSBI6_H_CLK>;
-+ clock-names = "core", "iface";
-+ status = "disabled";
-+
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+ };
-+ };
-+
- gsbi7: gsbi@16600000 {
- status = "disabled";
- compatible = "qcom,gsbi-v1.0.0";
-@@ -658,6 +861,19 @@
- clock-names = "core", "iface";
- status = "disabled";
- };
-+
-+ gsbi7_i2c: i2c@16680000 {
-+ compatible = "qcom,i2c-qup-v1.1.1";
-+ reg = <0x16680000 0x1000>;
-+ interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>;
-+
-+ clocks = <&gcc GSBI7_QUP_CLK>, <&gcc GSBI7_H_CLK>;
-+ clock-names = "core", "iface";
-+ status = "disabled";
-+
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+ };
- };
-
- rng@1a500000 {
-@@ -761,6 +977,17 @@
- };
- };
-
-+ L2: l2-cache {
-+ compatible = "qcom,krait-cache", "cache";
-+ cache-level = <2>;
-+ qcom,saw = <&saw_l2>;
-+
-+ clocks = <&kraitcc 4>;
-+ clock-names = "l2";
-+ l2-supply = <&smb208_s1a>;
-+ operating-points-v2 = <&opp_table_l2>;
-+ };
-+
- rpm: rpm@108000 {
- compatible = "qcom,rpm-ipq8064";
- reg = <0x108000 0x1000>;
-@@ -828,6 +1055,11 @@
- clock-output-names = "acpu_l2_aux";
- };
-
-+ kraitcc: clock-controller {
-+ compatible = "qcom,krait-cc-v1";
-+ #clock-cells = <1>;
-+ };
-+
- lcc: clock-controller@28000000 {
- compatible = "qcom,lcc-ipq8064";
- reg = <0x28000000 0x1000>;
-@@ -835,6 +1067,11 @@
- #reset-cells = <1>;
- };
-
-+ sfpb_mutex_block: syscon@1200600 {
-+ compatible = "syscon";
-+ reg = <0x01200600 0x100>;
-+ };
-+
- pcie0: pci@1b500000 {
- compatible = "qcom,pcie-ipq8064";
- reg = <0x1b500000 0x1000
-@@ -1184,6 +1421,21 @@
- };
- };
-
-+
-+ mdio0: mdio@37000000 {
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ compatible = "qcom,ipq8064-mdio", "syscon";
-+ reg = <0x37000000 0x200000>;
-+ resets = <&gcc GMAC_CORE1_RESET>;
-+ reset-names = "stmmaceth";
-+ clocks = <&gcc GMAC_CORE1_CLK>;
-+ clock-names = "stmmaceth";
-+
-+ status = "disabled";
-+ };
-+
- vsdcc_fixed: vsdcc-regulator {
- compatible = "regulator-fixed";
- regulator-name = "SDCC Power";
-@@ -1258,4 +1510,17 @@
- };
- };
- };
-+
-+ sfpb_mutex: sfpb-mutex {
-+ compatible = "qcom,sfpb-mutex";
-+ syscon = <&sfpb_mutex_block 4 4>;
-+
-+ #hwlock-cells = <1>;
-+ };
-+
-+ smem {
-+ compatible = "qcom,smem";
-+ memory-region = <&smem>;
-+ hwlocks = <&sfpb_mutex 3>;
-+ };
- };
+++ /dev/null
-This uses upstream qcom-ipq8064-v1.0.dtsi and modifies it by patches
-instead of keeping a local version.
-We drop partitions, LEDs and keys from the file as we will implement
-them differently anyway.
-
---- a/arch/arm/boot/dts/qcom-ipq8064-v1.0.dtsi
-+++ b/arch/arm/boot/dts/qcom-ipq8064-v1.0.dtsi
-@@ -42,16 +42,6 @@
- #size-cells = <1>;
- spi-max-frequency = <50000000>;
- reg = <0>;
--
-- partition@0 {
-- label = "rootfs";
-- reg = <0x0 0x1000000>;
-- };
--
-- partition@1 {
-- label = "scratch";
-- reg = <0x1000000 0x1000000>;
-- };
- };
- };
- };
-@@ -64,64 +54,5 @@
- ports-implemented = <0x1>;
- status = "okay";
- };
--
-- gpio_keys {
-- compatible = "gpio-keys";
-- pinctrl-0 = <&buttons_pins>;
-- pinctrl-names = "default";
--
-- button@1 {
-- label = "reset";
-- linux,code = <KEY_RESTART>;
-- gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>;
-- linux,input-type = <1>;
-- debounce-interval = <60>;
-- };
-- button@2 {
-- label = "wps";
-- linux,code = <KEY_WPS_BUTTON>;
-- gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>;
-- linux,input-type = <1>;
-- debounce-interval = <60>;
-- };
-- };
--
-- leds {
-- compatible = "gpio-leds";
-- pinctrl-0 = <&leds_pins>;
-- pinctrl-names = "default";
--
-- led@7 {
-- label = "led_usb1";
-- gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>;
-- linux,default-trigger = "usbdev";
-- default-state = "off";
-- };
--
-- led@8 {
-- label = "led_usb3";
-- gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>;
-- linux,default-trigger = "usbdev";
-- default-state = "off";
-- };
--
-- led@9 {
-- label = "status_led_fail";
-- gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>;
-- default-state = "off";
-- };
--
-- led@26 {
-- label = "sata_led";
-- gpios = <&qcom_pinmux 26 GPIO_ACTIVE_HIGH>;
-- default-state = "off";
-- };
--
-- led@53 {
-- label = "status_led_pass";
-- gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>;
-- default-state = "off";
-- };
-- };
- };
- };
+++ /dev/null
-This uses upstream qcom-ipq8064-v1.0.dtsi and modifies it by patches
-instead of keeping a local version. This patch adds our local adjustments
-for the (local) additional contents of qcom-ipq8064.dtsi
-
---- a/arch/arm/boot/dts/qcom-ipq8064-v1.0.dtsi
-+++ b/arch/arm/boot/dts/qcom-ipq8064-v1.0.dtsi
-@@ -56,3 +56,7 @@
- };
- };
- };
-+
-+&CPU_SPC {
-+ status = "okay";
-+};
+++ /dev/null
---- a/arch/arm/boot/dts/qcom-ipq8064-rb3011.dts
-+++ b/arch/arm/boot/dts/qcom-ipq8064-rb3011.dts
-@@ -24,73 +24,6 @@
- device_type = "memory";
- };
-
-- mdio0: mdio-0 {
-- status = "okay";
-- compatible = "virtual,mdio-gpio";
-- gpios = <&qcom_pinmux 1 GPIO_ACTIVE_HIGH>,
-- <&qcom_pinmux 0 GPIO_ACTIVE_HIGH>;
-- #address-cells = <1>;
-- #size-cells = <0>;
--
-- pinctrl-0 = <&mdio0_pins>;
-- pinctrl-names = "default";
--
-- switch0: switch@10 {
-- compatible = "qca,qca8337";
-- #address-cells = <1>;
-- #size-cells = <0>;
--
-- dsa,member = <0 0>;
--
-- pinctrl-0 = <&sw0_reset_pin>;
-- pinctrl-names = "default";
--
-- reset-gpios = <&qcom_pinmux 16 GPIO_ACTIVE_LOW>;
-- reg = <0x10>;
--
-- ports {
-- #address-cells = <1>;
-- #size-cells = <0>;
--
-- switch0cpu: port@0 {
-- reg = <0>;
-- label = "cpu";
-- ethernet = <&gmac0>;
-- phy-mode = "rgmii-id";
-- fixed-link {
-- speed = <1000>;
-- full-duplex;
-- };
-- };
--
-- port@1 {
-- reg = <1>;
-- label = "sw1";
-- };
--
-- port@2 {
-- reg = <2>;
-- label = "sw2";
-- };
--
-- port@3 {
-- reg = <3>;
-- label = "sw3";
-- };
--
-- port@4 {
-- reg = <4>;
-- label = "sw4";
-- };
--
-- port@5 {
-- reg = <5>;
-- label = "sw5";
-- };
-- };
-- };
-- };
--
- mdio1: mdio-1 {
- status = "okay";
- compatible = "virtual,mdio-gpio";
-@@ -220,6 +153,68 @@
- status = "okay";
- };
-
-+&mdio0 {
-+ status = "okay";
-+
-+ pinctrl-0 = <&mdio0_pins>;
-+ pinctrl-names = "default";
-+
-+ switch0: switch@10 {
-+ compatible = "qca,qca8337";
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ dsa,member = <0 0>;
-+
-+ pinctrl-0 = <&sw0_reset_pin>;
-+ pinctrl-names = "default";
-+
-+ reset-gpios = <&qcom_pinmux 16 GPIO_ACTIVE_LOW>;
-+ reg = <0x10>;
-+
-+ ports {
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ switch0cpu: port@0 {
-+ reg = <0>;
-+ label = "cpu";
-+ ethernet = <&gmac0>;
-+ phy-mode = "rgmii-id";
-+ fixed-link {
-+ speed = <1000>;
-+ full-duplex;
-+ };
-+ };
-+
-+ port@1 {
-+ reg = <1>;
-+ label = "sw1";
-+ };
-+
-+ port@2 {
-+ reg = <2>;
-+ label = "sw2";
-+ };
-+
-+ port@3 {
-+ reg = <3>;
-+ label = "sw3";
-+ };
-+
-+ port@4 {
-+ reg = <4>;
-+ label = "sw4";
-+ };
-+
-+ port@5 {
-+ reg = <5>;
-+ label = "sw5";
-+ };
-+ };
-+ };
-+};
-+
- &gmac0 {
- status = "okay";
-
--- /dev/null
+From 5a8aa766cedac0ceaa4beabc30e9fa62dd9f1ac1 Mon Sep 17 00:00:00 2001
+From: Ansuel Smith <ansuelsmth@gmail.com>
+Date: Fri, 29 Apr 2022 14:23:16 +0200
+Subject: [PATCH v2 1/2] ARM: dts: qcom: replace gcc PXO with pxo_board fixed
+ clock
+
+Replace gcc PXO phandle to pxo_board fixed clock declared in the dts.
+gcc driver doesn't provide PXO_SRC as it's a fixed-clock. This cause a
+kernel panic if any driver actually try to use it.
+
+Fixes: 40cf5c884a96 ("ARM: dts: qcom: add L2CC and RPM for IPQ8064")
+Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
+---
+ arch/arm/boot/dts/qcom-ipq8064.dtsi | 4 ++--
+ 1 file changed, 2 insertions(+), 2 deletions(-)
+
+--- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
++++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
+@@ -304,7 +304,7 @@
+ clock-frequency = <25000000>;
+ };
+
+- pxo_board {
++ pxo_board: pxo_board {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <25000000>;
+@@ -782,7 +782,7 @@
+ l2cc: clock-controller@2011000 {
+ compatible = "qcom,kpss-gcc", "syscon";
+ reg = <0x2011000 0x1000>;
+- clocks = <&gcc PLL8_VOTE>, <&gcc PXO_SRC>;
++ clocks = <&gcc PLL8_VOTE>, <&pxo_board>;
+ clock-names = "pll8_vote", "pxo";
+ clock-output-names = "acpu_l2_aux";
+ };
+++ /dev/null
-From 84909e85881d67244240c9f40974ce12a51e3886 Mon Sep 17 00:00:00 2001
-From: Ansuel Smith <ansuelsmth@gmail.com>
-Date: Tue, 11 May 2021 23:09:45 +0200
-Subject: [PATCH] ARM: dts: qcom: reduce pci IO size to 64K
-
-The current value is probably a typo and is actually uncommon to find
-1MB IO space even on a x86 arch. Also with recent changes to the pci
-driver, pci1 and pci2 now fails to function as any connected device
-fails any reg read/write. Reduce this to 64K as it should be more than
-enough and 3 * 64K of total IO space doesn't exceed the IO_SPACE_LIMIT
-hardcoded for the ARM arch.
-
-Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
----
- arch/arm/boot/dts/qcom-ipq8064.dtsi | 6 +++---
- 1 file changed, 3 insertions(+), 3 deletions(-)
-
---- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
-+++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
-@@ -1086,7 +1086,7 @@
- #address-cells = <3>;
- #size-cells = <2>;
-
-- ranges = <0x81000000 0 0x0fe00000 0x0fe00000 0 0x00100000 /* downstream I/O */
-+ ranges = <0x81000000 0 0x0fe00000 0x0fe00000 0 0x00010000 /* downstream I/O */
- 0x82000000 0 0x08000000 0x08000000 0 0x07e00000>; /* non-prefetchable memory */
-
- interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
-@@ -1137,7 +1137,7 @@
- #address-cells = <3>;
- #size-cells = <2>;
-
-- ranges = <0x81000000 0 0x31e00000 0x31e00000 0 0x00100000 /* downstream I/O */
-+ ranges = <0x81000000 0 0x31e00000 0x31e00000 0 0x00010000 /* downstream I/O */
- 0x82000000 0 0x2e000000 0x2e000000 0 0x03e00000>; /* non-prefetchable memory */
-
- interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
-@@ -1188,7 +1188,7 @@
- #address-cells = <3>;
- #size-cells = <2>;
-
-- ranges = <0x81000000 0 0x35e00000 0x35e00000 0 0x00100000 /* downstream I/O */
-+ ranges = <0x81000000 0 0x35e00000 0x35e00000 0 0x00010000 /* downstream I/O */
- 0x82000000 0 0x32000000 0x32000000 0 0x03e00000>; /* non-prefetchable memory */
-
- interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
--- /dev/null
+From 9fa82f98cb85e5432060f469253adcf14fa38082 Mon Sep 17 00:00:00 2001
+From: Ansuel Smith <ansuelsmth@gmail.com>
+Date: Mon, 17 Jan 2022 21:59:39 +0100
+Subject: [PATCH v2 2/2] ARM: dts: qcom: add syscon and cxo/pxo clock to gcc
+ node for ipq8064
+
+Add syscon compatible required for tsens driver to correctly probe driver
+and access the reg. Also add cxo and pxo tag and declare them as gcc clock
+now requires them for the ipq8064 gcc driver that has now been modernized.
+
+Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
+Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
+Reviewed-by: Stephen Boyd <sboyd@kernel.org>
+---
+ arch/arm/boot/dts/qcom-ipq8064.dtsi | 6 ++++--
+ 1 file changed, 4 insertions(+), 2 deletions(-)
+
+--- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
++++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
+@@ -298,7 +298,7 @@
+ };
+
+ clocks {
+- cxo_board {
++ cxo_board: cxo_board {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <25000000>;
+@@ -736,7 +736,9 @@
+ };
+
+ gcc: clock-controller@900000 {
+- compatible = "qcom,gcc-ipq8064";
++ compatible = "qcom,gcc-ipq8064", "syscon";
++ clocks = <&pxo_board>, <&cxo_board>;
++ clock-names = "pxo", "cxo";
+ reg = <0x00900000 0x4000>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
--- /dev/null
+From 4af1defb305798d1a064a5ea0d0c9b30e5eee185 Mon Sep 17 00:00:00 2001
+From: Christian Marangi <ansuelsmth@gmail.com>
+Date: Thu, 7 Jul 2022 03:09:35 +0200
+Subject: [PATCH 1/8] ARM: dts: qcom: ipq8064: add multiple missing pin
+ definition
+
+Add missing definition for mdio0 pins used for gpio-bitbang driver,i2c4
+pins and rgmii2 pins for ipq8064.
+
+Drop i2c4_pins node from ipq8064-ap148 dts as it's now moved to ipq8064
+dtsi.
+
+Drop mdio0_pins node from ipq8064-rb3011 dts as it's now moved to
+ipq8064 dtsi.
+
+Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
+Tested-by: Jonathan McDowell <noodles@earth.li>
+Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
+Link: https://lore.kernel.org/r/20220707010943.20857-2-ansuelsmth@gmail.com
+---
+ arch/arm/boot/dts/qcom-ipq8064-ap148.dts | 6 -----
+ arch/arm/boot/dts/qcom-ipq8064-rb3011.dts | 9 -------
+ arch/arm/boot/dts/qcom-ipq8064.dtsi | 32 +++++++++++++++++++++++
+ 3 files changed, 32 insertions(+), 15 deletions(-)
+
+--- a/arch/arm/boot/dts/qcom-ipq8064-rb3011.dts
++++ b/arch/arm/boot/dts/qcom-ipq8064-rb3011.dts
+@@ -305,15 +305,6 @@
+ };
+ };
+
+- mdio0_pins: mdio0_pins {
+- mux {
+- pins = "gpio0", "gpio1";
+- function = "gpio";
+- drive-strength = <8>;
+- bias-disable;
+- };
+- };
+-
+ mdio1_pins: mdio1_pins {
+ mux {
+ pins = "gpio10", "gpio11";
+--- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
++++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
+@@ -382,6 +382,13 @@
+ };
+ };
+
++ i2c4_pins: i2c4-default {
++ pins = "gpio12", "gpio13";
++ function = "gsbi4";
++ drive-strength = <12>;
++ bias-disable;
++ };
++
+ spi_pins: spi_pins {
+ mux {
+ pins = "gpio18", "gpio19", "gpio21";
+@@ -424,6 +431,8 @@
+
+ pullups {
+ pins = "gpio39";
++ function = "nand";
++ drive-strength = <10>;
+ bias-pull-up;
+ };
+
+@@ -431,9 +440,32 @@
+ pins = "gpio40", "gpio41", "gpio42",
+ "gpio43", "gpio44", "gpio45",
+ "gpio46", "gpio47";
++ function = "nand";
++ drive-strength = <10>;
+ bias-bus-hold;
+ };
+ };
++
++ mdio0_pins: mdio0-pins {
++ mux {
++ pins = "gpio0", "gpio1";
++ function = "mdio";
++ drive-strength = <8>;
++ bias-disable;
++ };
++ };
++
++ rgmii2_pins: rgmii2-pins {
++ mux {
++ pins = "gpio27", "gpio28", "gpio29",
++ "gpio30", "gpio31", "gpio32",
++ "gpio51", "gpio52", "gpio59",
++ "gpio60", "gpio61", "gpio62";
++ function = "rgmii2";
++ drive-strength = <8>;
++ bias-disable;
++ };
++ };
+ };
+
+ intc: interrupt-controller@2000000 {
--- /dev/null
+From d883a12a547b6d42e795ff3b5ac87cfd013b5423 Mon Sep 17 00:00:00 2001
+From: Christian Marangi <ansuelsmth@gmail.com>
+Date: Thu, 7 Jul 2022 03:09:36 +0200
+Subject: [PATCH 2/8] ARM: dts: qcom: ipq8064: add gsbi6 missing definition
+
+Add gsbi6 missing definition for ipq8064.
+
+Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
+Tested-by: Jonathan McDowell <noodles@earth.li>
+Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
+Link: https://lore.kernel.org/r/20220707010943.20857-3-ansuelsmth@gmail.com
+---
+ arch/arm/boot/dts/qcom-ipq8064.dtsi | 43 +++++++++++++++++++++++++++++
+ 1 file changed, 43 insertions(+)
+
+--- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
++++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
+@@ -663,6 +663,49 @@
+ };
+ };
+
++ gsbi6: gsbi@16500000 {
++ compatible = "qcom,gsbi-v1.0.0";
++ reg = <0x16500000 0x100>;
++ cell-index = <6>;
++ clocks = <&gcc GSBI6_H_CLK>;
++ clock-names = "iface";
++ #address-cells = <1>;
++ #size-cells = <1>;
++ ranges;
++
++ syscon-tcsr = <&tcsr>;
++
++ status = "disabled";
++
++ gsbi6_i2c: i2c@16580000 {
++ compatible = "qcom,i2c-qup-v1.1.1";
++ reg = <0x16580000 0x1000>;
++ interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>;
++
++ clocks = <&gcc GSBI6_QUP_CLK>, <&gcc GSBI6_H_CLK>;
++ clock-names = "core", "iface";
++
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ status = "disabled";
++ };
++
++ gsbi6_spi: spi@16580000 {
++ compatible = "qcom,spi-qup-v1.1.1";
++ reg = <0x16580000 0x1000>;
++ interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>;
++
++ clocks = <&gcc GSBI6_QUP_CLK>, <&gcc GSBI6_H_CLK>;
++ clock-names = "core", "iface";
++
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ status = "disabled";
++ };
++ };
++
+ gsbi7: gsbi@16600000 {
+ status = "disabled";
+ compatible = "qcom,gsbi-v1.0.0";
--- /dev/null
+From 5c47a46d5e942ea6b041c8b7727b201817c1ff76 Mon Sep 17 00:00:00 2001
+From: Christian Marangi <ansuelsmth@gmail.com>
+Date: Thu, 7 Jul 2022 03:09:37 +0200
+Subject: [PATCH 3/8] ARM: dts: qcom: ipq8064: add specific dtsi with smb208
+ rpm regulators
+
+Add specific ipq8064 dtsi with smb208 rpm regulators.
+
+Qcom advise to use this configuration but it's not mandatory and OEM
+can decide to implement their own regulators.
+smb208 regulators are used to scale CPU voltage, L2 cache voltage and
+Ubi32 cores.
+
+There regulators are controlled by rpm and to correctly works gsbi4-i2c
+require to be NEVER disabled or rpm will reject any regulator change
+request.
+
+Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
+Tested-by: Jonathan McDowell <noodles@earth.li>
+Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
+Link: https://lore.kernel.org/r/20220707010943.20857-4-ansuelsmth@gmail.com
+---
+ arch/arm/boot/dts/qcom-ipq8064-smb208.dtsi | 37 ++++++++++++++++++++++
+ 1 file changed, 37 insertions(+)
+ create mode 100644 arch/arm/boot/dts/qcom-ipq8064-smb208.dtsi
+
+--- /dev/null
++++ b/arch/arm/boot/dts/qcom-ipq8064-smb208.dtsi
+@@ -0,0 +1,37 @@
++// SPDX-License-Identifier: GPL-2.0
++
++#include "qcom-ipq8064.dtsi"
++
++&rpm {
++ smb208_regulators: regulators {
++ compatible = "qcom,rpm-smb208-regulators";
++
++ smb208_s1a: s1a {
++ regulator-min-microvolt = <1050000>;
++ regulator-max-microvolt = <1150000>;
++
++ qcom,switch-mode-frequency = <1200000>;
++ };
++
++ smb208_s1b: s1b {
++ regulator-min-microvolt = <1050000>;
++ regulator-max-microvolt = <1150000>;
++
++ qcom,switch-mode-frequency = <1200000>;
++ };
++
++ smb208_s2a: s2a {
++ regulator-min-microvolt = < 800000>;
++ regulator-max-microvolt = <1250000>;
++
++ qcom,switch-mode-frequency = <1200000>;
++ };
++
++ smb208_s2b: s2b {
++ regulator-min-microvolt = < 800000>;
++ regulator-max-microvolt = <1250000>;
++
++ qcom,switch-mode-frequency = <1200000>;
++ };
++ };
++};
--- /dev/null
+From 0ce34e0c13e99c239cce6099f64b0e95697f36b1 Mon Sep 17 00:00:00 2001
+From: Christian Marangi <ansuelsmth@gmail.com>
+Date: Thu, 7 Jul 2022 03:09:38 +0200
+Subject: [PATCH 4/8] ARM: dts: qcom: ipq8064: add missing snps,dwmac
+ compatible for gmac
+
+Add missing snps,dwmac compatible for gmac ipq8064 dtsi.
+
+Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
+Tested-by: Jonathan McDowell <noodles@earth.li>
+Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
+Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
+Link: https://lore.kernel.org/r/20220707010943.20857-5-ansuelsmth@gmail.com
+---
+ arch/arm/boot/dts/qcom-ipq8064.dtsi | 8 ++++----
+ 1 file changed, 4 insertions(+), 4 deletions(-)
+
+--- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
++++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
+@@ -1042,7 +1042,7 @@
+
+ gmac0: ethernet@37000000 {
+ device_type = "network";
+- compatible = "qcom,ipq806x-gmac";
++ compatible = "qcom,ipq806x-gmac", "snps,dwmac";
+ reg = <0x37000000 0x200000>;
+ interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "macirq";
+@@ -1066,7 +1066,7 @@
+
+ gmac1: ethernet@37200000 {
+ device_type = "network";
+- compatible = "qcom,ipq806x-gmac";
++ compatible = "qcom,ipq806x-gmac", "snps,dwmac";
+ reg = <0x37200000 0x200000>;
+ interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "macirq";
+@@ -1090,7 +1090,7 @@
+
+ gmac2: ethernet@37400000 {
+ device_type = "network";
+- compatible = "qcom,ipq806x-gmac";
++ compatible = "qcom,ipq806x-gmac", "snps,dwmac";
+ reg = <0x37400000 0x200000>;
+ interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "macirq";
+@@ -1114,7 +1114,7 @@
+
+ gmac3: ethernet@37600000 {
+ device_type = "network";
+- compatible = "qcom,ipq806x-gmac";
++ compatible = "qcom,ipq806x-gmac", "snps,dwmac";
+ reg = <0x37600000 0x200000>;
+ interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "macirq";
--- /dev/null
+From d63d3124c0a5cdbe8b91d81b922fe56b2462e1b9 Mon Sep 17 00:00:00 2001
+From: Christian Marangi <ansuelsmth@gmail.com>
+Date: Thu, 7 Jul 2022 03:09:39 +0200
+Subject: [PATCH 5/8] ARM: dts: qcom: ipq8064: disable usb phy by default
+
+Disable usb phy by default. When the usb phy were pushed, half of them
+were flagged as disabled by mistake.
+Correctly disable all usb phy and enable them only if a device actually
+use them.
+
+Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
+Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
+Link: https://lore.kernel.org/r/20220707010943.20857-6-ansuelsmth@gmail.com
+---
+ arch/arm/boot/dts/qcom-ipq8064.dtsi | 4 ++++
+ 1 file changed, 4 insertions(+)
+
+--- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
++++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
+@@ -1188,6 +1188,8 @@
+ clocks = <&gcc USB30_1_UTMI_CLK>;
+ clock-names = "ref";
+ #phy-cells = <0>;
++
++ status = "disabled";
+ };
+
+ ss_phy_1: phy@110f8830 {
+@@ -1196,6 +1198,8 @@
+ clocks = <&gcc USB30_1_MASTER_CLK>;
+ clock-names = "ref";
+ #phy-cells = <0>;
++
++ status = "disabled";
+ };
+
+ usb3_1: usb3@110f8800 {
--- /dev/null
+From 8fafb7e5c041814876266259e5e439f93571dcef Mon Sep 17 00:00:00 2001
+From: Christian Marangi <ansuelsmth@gmail.com>
+Date: Thu, 7 Jul 2022 03:09:40 +0200
+Subject: [PATCH 6/8] ARM: dts: qcom: ipq8064: reduce pci IO size to 64K
+
+The current value for pci IO is problematic for ath10k wifi card
+commonly connected to ipq8064 SoC.
+The current value is probably a typo and is actually uncommon to find
+1MB IO space even on a x86 arch. Also with recent changes to the pci
+driver, pci1 and pci2 now fails to function as any connected device
+fails any reg read/write. Reduce this to 64K as it should be more than
+enough and 3 * 64K of total IO space doesn't exceed the IO_SPACE_LIMIT
+hardcoded for the ARM arch.
+
+Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
+Tested-by: Jonathan McDowell <noodles@earth.li>
+Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
+Link: https://lore.kernel.org/r/20220707010943.20857-7-ansuelsmth@gmail.com
+---
+ arch/arm/boot/dts/qcom-ipq8064.dtsi | 6 +++---
+ 1 file changed, 3 insertions(+), 3 deletions(-)
+
+--- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
++++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
+@@ -885,7 +885,7 @@
+ #address-cells = <3>;
+ #size-cells = <2>;
+
+- ranges = <0x81000000 0 0x0fe00000 0x0fe00000 0 0x00100000 /* downstream I/O */
++ ranges = <0x81000000 0 0x0fe00000 0x0fe00000 0 0x00010000 /* downstream I/O */
+ 0x82000000 0 0x08000000 0x08000000 0 0x07e00000>; /* non-prefetchable memory */
+
+ interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+@@ -936,7 +936,7 @@
+ #address-cells = <3>;
+ #size-cells = <2>;
+
+- ranges = <0x81000000 0 0x31e00000 0x31e00000 0 0x00100000 /* downstream I/O */
++ ranges = <0x81000000 0 0x31e00000 0x31e00000 0 0x00010000 /* downstream I/O */
+ 0x82000000 0 0x2e000000 0x2e000000 0 0x03e00000>; /* non-prefetchable memory */
+
+ interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
+@@ -987,7 +987,7 @@
+ #address-cells = <3>;
+ #size-cells = <2>;
+
+- ranges = <0x81000000 0 0x35e00000 0x35e00000 0 0x00100000 /* downstream I/O */
++ ranges = <0x81000000 0 0x35e00000 0x35e00000 0 0x00010000 /* downstream I/O */
+ 0x82000000 0 0x32000000 0x32000000 0 0x03e00000>; /* non-prefetchable memory */
+
+ interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
--- /dev/null
+From 6c421a9c08286389bb331fe783e2625c9efcc187 Mon Sep 17 00:00:00 2001
+From: Christian Marangi <ansuelsmth@gmail.com>
+Date: Thu, 7 Jul 2022 03:09:41 +0200
+Subject: [PATCH 7/8] ARM: dts: qcom: ipq8064: fix and add some missing gsbi
+ node
+
+Add some tag for gsbi to make them usable for ipq8064 SoC. Add missing
+gsbi7 i2c node and gsbi1 node.
+
+Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
+Tested-by: Jonathan McDowell <noodles@earth.li>
+Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
+Link: https://lore.kernel.org/r/20220707010943.20857-8-ansuelsmth@gmail.com
+---
+ arch/arm/boot/dts/qcom-ipq8064.dtsi | 54 ++++++++++++++++++++++++++++-
+ 1 file changed, 53 insertions(+), 1 deletion(-)
+
+--- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
++++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
+@@ -539,6 +539,44 @@
+ regulator;
+ };
+
++ gsbi1: gsbi@12440000 {
++ compatible = "qcom,gsbi-v1.0.0";
++ reg = <0x12440000 0x100>;
++ cell-index = <1>;
++ clocks = <&gcc GSBI1_H_CLK>;
++ clock-names = "iface";
++ #address-cells = <1>;
++ #size-cells = <1>;
++ ranges;
++
++ syscon-tcsr = <&tcsr>;
++
++ status = "disabled";
++
++ gsbi1_serial: serial@12450000 {
++ compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
++ reg = <0x12450000 0x100>,
++ <0x12400000 0x03>;
++ interrupts = <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>;
++ clocks = <&gcc GSBI1_UART_CLK>, <&gcc GSBI1_H_CLK>;
++ clock-names = "core", "iface";
++
++ status = "disabled";
++ };
++
++ gsbi1_i2c: i2c@12460000 {
++ compatible = "qcom,i2c-qup-v1.1.1";
++ reg = <0x12460000 0x1000>;
++ interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>;
++ clocks = <&gcc GSBI1_QUP_CLK>, <&gcc GSBI1_H_CLK>;
++ clock-names = "core", "iface";
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ status = "disabled";
++ };
++ };
++
+ gsbi2: gsbi@12480000 {
+ compatible = "qcom,gsbi-v1.0.0";
+ cell-index = <2>;
+@@ -562,7 +600,7 @@
+ status = "disabled";
+ };
+
+- i2c@124a0000 {
++ gsbi2_i2c: i2c@124a0000 {
+ compatible = "qcom,i2c-qup-v1.1.1";
+ reg = <0x124a0000 0x1000>;
+ interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>;
+@@ -727,6 +765,20 @@
+ clock-names = "core", "iface";
+ status = "disabled";
+ };
++
++ gsbi7_i2c: i2c@16680000 {
++ compatible = "qcom,i2c-qup-v1.1.1";
++ reg = <0x16680000 0x1000>;
++ interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>;
++
++ clocks = <&gcc GSBI7_QUP_CLK>, <&gcc GSBI7_H_CLK>;
++ clock-names = "core", "iface";
++
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ status = "disabled";
++ };
+ };
+
+ rng@1a500000 {
--- /dev/null
+From 7f5aecdd4ffcc018f73171bc0e028cd4e3361acd Mon Sep 17 00:00:00 2001
+From: Christian Marangi <ansuelsmth@gmail.com>
+Date: Thu, 7 Jul 2022 03:09:43 +0200
+Subject: [PATCH 8/8] ARM: dts: qcom: ipq8064: add speedbin efuse nvmem node
+
+Add speedbin efuse nvmem cell needed for the opp table for the CPU
+freqs.
+
+Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
+Tested-by: Jonathan McDowell <noodles@earth.li>
+Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
+Link: https://lore.kernel.org/r/20220707010943.20857-10-ansuelsmth@gmail.com
+---
+ arch/arm/boot/dts/qcom-ipq8064.dtsi | 3 +++
+ 1 file changed, 3 insertions(+)
+
+--- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
++++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
+@@ -854,6 +854,9 @@
+ reg = <0x00700000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
++ speedbin_efuse: speedbin@c0 {
++ reg = <0xc0 0x4>;
++ };
+ tsens_calib: calib@400 {
+ reg = <0x400 0xb>;
+ };
--- /dev/null
+From cdab30b44518513003607ecfc8a22de3dbbb78ed Mon Sep 17 00:00:00 2001
+From: Christian Marangi <ansuelsmth@gmail.com>
+Date: Thu, 7 Jul 2022 12:20:38 +0200
+Subject: [PATCH 1/1] hwspinlock: qcom: Add support for mmio usage to
+ sfpb-mutex
+
+Allow sfpb-mutex to use mmio in addition to syscon.
+
+Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
+Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
+Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
+Link: https://lore.kernel.org/r/20220707102040.1859-1-ansuelsmth@gmail.com
+---
+ drivers/hwspinlock/qcom_hwspinlock.c | 28 +++++++++++++++++++++++-----
+ 1 file changed, 23 insertions(+), 5 deletions(-)
+
+--- a/drivers/hwspinlock/qcom_hwspinlock.c
++++ b/drivers/hwspinlock/qcom_hwspinlock.c
+@@ -19,6 +19,11 @@
+ #define QCOM_MUTEX_APPS_PROC_ID 1
+ #define QCOM_MUTEX_NUM_LOCKS 32
+
++struct qcom_hwspinlock_of_data {
++ u32 offset;
++ u32 stride;
++};
++
+ static int qcom_hwspinlock_trylock(struct hwspinlock *lock)
+ {
+ struct regmap_field *field = lock->priv;
+@@ -63,9 +68,20 @@ static const struct hwspinlock_ops qcom_
+ .unlock = qcom_hwspinlock_unlock,
+ };
+
++static const struct qcom_hwspinlock_of_data of_sfpb_mutex = {
++ .offset = 0x4,
++ .stride = 0x4,
++};
++
++/* All modern platform has offset 0 and stride of 4k */
++static const struct qcom_hwspinlock_of_data of_tcsr_mutex = {
++ .offset = 0,
++ .stride = 0x1000,
++};
++
+ static const struct of_device_id qcom_hwspinlock_of_match[] = {
+- { .compatible = "qcom,sfpb-mutex" },
+- { .compatible = "qcom,tcsr-mutex" },
++ { .compatible = "qcom,sfpb-mutex", .data = &of_sfpb_mutex },
++ { .compatible = "qcom,tcsr-mutex", .data = &of_tcsr_mutex },
+ { }
+ };
+ MODULE_DEVICE_TABLE(of, qcom_hwspinlock_of_match);
+@@ -112,12 +128,14 @@ static const struct regmap_config tcsr_m
+ static struct regmap *qcom_hwspinlock_probe_mmio(struct platform_device *pdev,
+ u32 *offset, u32 *stride)
+ {
++ const struct qcom_hwspinlock_of_data *data;
+ struct device *dev = &pdev->dev;
+ void __iomem *base;
+
+- /* All modern platform has offset 0 and stride of 4k */
+- *offset = 0;
+- *stride = 0x1000;
++ data = of_device_get_match_data(dev);
++
++ *offset = data->offset;
++ *stride = data->stride;
+
+ base = devm_platform_ioremap_resource(pdev, 0);
+ if (IS_ERR(base))
--- /dev/null
+From fbe4be367b2169602f6a5949a20d2917b25714d4 Mon Sep 17 00:00:00 2001
+From: Christian Marangi <ansuelsmth@gmail.com>
+Date: Thu, 7 Jul 2022 12:20:39 +0200
+Subject: [PATCH 1/2] ARM: dts: qcom: ipq8064: add missing hwlock
+
+Add missing hwlock for ipq8064 dtsi provided by qcom,sfpb-mutex.
+
+Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
+Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+[bjorn: Moved the node inside /soc]
+Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
+Link: https://lore.kernel.org/r/20220707102040.1859-2-ansuelsmth@gmail.com
+---
+ arch/arm/boot/dts/qcom-ipq8064.dtsi | 7 +++++++
+ 1 file changed, 7 insertions(+)
+
+--- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
++++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
+@@ -1357,5 +1357,12 @@
+ dma-names = "tx", "rx";
+ };
+ };
++
++ sfpb_mutex: hwlock@1200600 {
++ compatible = "qcom,sfpb-mutex";
++ reg = <0x01200600 0x100>;
++
++ #hwlock-cells = <1>;
++ };
+ };
+ };
--- /dev/null
+From 4fefb5434c4b735daf913abaef12431405368031 Mon Sep 17 00:00:00 2001
+From: Christian Marangi <ansuelsmth@gmail.com>
+Date: Thu, 7 Jul 2022 12:20:40 +0200
+Subject: [PATCH 2/2] ARM: dts: qcom: ipq8064: add missing smem compatible
+
+Add missing smem compatible and hwlocks phandle for ipq8064 dtsi
+smem node.
+
+Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
+Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
+Link: https://lore.kernel.org/r/20220707102040.1859-3-ansuelsmth@gmail.com
+---
+ arch/arm/boot/dts/qcom-ipq8064.dtsi | 3 +++
+ 1 file changed, 3 insertions(+)
+
+--- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
++++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
+@@ -292,8 +292,11 @@
+ };
+
+ smem: smem@41000000 {
++ compatible = "qcom,smem";
+ reg = <0x41000000 0x200000>;
+ no-map;
++
++ hwlocks = <&sfpb_mutex 3>;
+ };
+ };
+
--- /dev/null
+From 9f7097a8b1948533a6db1b53b5c0480cc75bbd16 Mon Sep 17 00:00:00 2001
+From: Christian Marangi <ansuelsmth@gmail.com>
+Date: Mon, 18 Jul 2022 18:05:16 +0200
+Subject: [PATCH 1/3] ARM: dts: qcom: ipq8064: add v2 dtsi variant
+
+Add ipq8064-v2.0 dtsi variant that differ from original ipq8064 SoC for
+some additional pcie, sata and usb configuration values, additional
+reserved memory and serial output.
+
+Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
+---
+ .../boot/dts/qcom-ipq8064-v2.0-smb208.dtsi | 37 ++++++++++
+ arch/arm/boot/dts/qcom-ipq8064-v2.0.dtsi | 69 +++++++++++++++++++
+ 2 files changed, 106 insertions(+)
+ create mode 100644 arch/arm/boot/dts/qcom-ipq8064-v2.0-smb208.dtsi
+ create mode 100644 arch/arm/boot/dts/qcom-ipq8064-v2.0.dtsi
+
+--- /dev/null
++++ b/arch/arm/boot/dts/qcom-ipq8064-v2.0-smb208.dtsi
+@@ -0,0 +1,37 @@
++// SPDX-License-Identifier: GPL-2.0
++
++#include "qcom-ipq8064-v2.0.dtsi"
++
++&rpm {
++ smb208_regulators: regulators {
++ compatible = "qcom,rpm-smb208-regulators";
++
++ smb208_s1a: s1a {
++ regulator-min-microvolt = <1050000>;
++ regulator-max-microvolt = <1150000>;
++
++ qcom,switch-mode-frequency = <1200000>;
++ };
++
++ smb208_s1b: s1b {
++ regulator-min-microvolt = <1050000>;
++ regulator-max-microvolt = <1150000>;
++
++ qcom,switch-mode-frequency = <1200000>;
++ };
++
++ smb208_s2a: s2a {
++ regulator-min-microvolt = < 800000>;
++ regulator-max-microvolt = <1250000>;
++
++ qcom,switch-mode-frequency = <1200000>;
++ };
++
++ smb208_s2b: s2b {
++ regulator-min-microvolt = < 800000>;
++ regulator-max-microvolt = <1250000>;
++
++ qcom,switch-mode-frequency = <1200000>;
++ };
++ };
++};
+--- /dev/null
++++ b/arch/arm/boot/dts/qcom-ipq8064-v2.0.dtsi
+@@ -0,0 +1,69 @@
++// SPDX-License-Identifier: GPL-2.0
++
++#include "qcom-ipq8064.dtsi"
++
++/ {
++ model = "Qualcomm Technologies, Inc. IPQ8064-v2.0";
++
++ aliases {
++ serial0 = &gsbi4_serial;
++ };
++
++ chosen {
++ stdout-path = "serial0:115200n8";
++ };
++
++ reserved-memory {
++ #address-cells = <1>;
++ #size-cells = <1>;
++ ranges;
++
++ rsvd@41200000 {
++ reg = <0x41200000 0x300000>;
++ no-map;
++ };
++ };
++};
++
++&gsbi4 {
++ qcom,mode = <GSBI_PROT_I2C_UART>;
++ status = "okay";
++
++ serial@16340000 {
++ status = "okay";
++ };
++ /*
++ * The i2c device on gsbi4 should not be enabled.
++ * On ipq806x designs gsbi4 i2c is meant for exclusive
++ * RPM usage. Turning this on in kernel manifests as
++ * i2c failure for the RPM.
++ */
++};
++
++&pcie0 {
++ compatible = "qcom,pcie-ipq8064-v2";
++};
++
++&pcie1 {
++ compatible = "qcom,pcie-ipq8064-v2";
++};
++
++&pcie2 {
++ compatible = "qcom,pcie-ipq8064-v2";
++};
++
++&sata {
++ ports-implemented = <0x1>;
++};
++
++&ss_phy_0 {
++ qcom,rx-eq = <2>;
++ qcom,tx-deamp_3_5db = <32>;
++ qcom,mpll = <5>;
++};
++
++&ss_phy_1 {
++ qcom,rx-eq = <2>;
++ qcom,tx-deamp_3_5db = <32>;
++ qcom,mpll = <5>;
++};
--- /dev/null
+From 41d9fa8de7845bd92d9c963196fdfd7ea9232bb2 Mon Sep 17 00:00:00 2001
+From: Christian Marangi <ansuelsmth@gmail.com>
+Date: Mon, 18 Jul 2022 18:07:26 +0200
+Subject: [PATCH 2/3] ARM: dts: qcom: ipq8064: add ipq8062 variant
+
+ipq8062 SoC is based on ipq8064-v2.0 with lower supported freq, lack of
+usb port and a reduced voltage output with the smb208 regulators.
+
+Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
+---
+ arch/arm/boot/dts/qcom-ipq8062-smb208.dtsi | 37 ++++++++++++++++++++++
+ arch/arm/boot/dts/qcom-ipq8062.dtsi | 8 +++++
+ 2 files changed, 45 insertions(+)
+ create mode 100644 arch/arm/boot/dts/qcom-ipq8062-smb208.dtsi
+ create mode 100644 arch/arm/boot/dts/qcom-ipq8062.dtsi
+
+--- /dev/null
++++ b/arch/arm/boot/dts/qcom-ipq8062-smb208.dtsi
+@@ -0,0 +1,37 @@
++// SPDX-License-Identifier: GPL-2.0-only
++
++#include "qcom-ipq8062.dtsi"
++
++&rpm {
++ smb208_regulators: regulators {
++ compatible = "qcom,rpm-smb208-regulators";
++
++ smb208_s1a: s1a {
++ regulator-min-microvolt = <1050000>;
++ regulator-max-microvolt = <1150000>;
++
++ qcom,switch-mode-frequency = <1200000>;
++ };
++
++ smb208_s1b: s1b {
++ regulator-min-microvolt = <1050000>;
++ regulator-max-microvolt = <1150000>;
++
++ qcom,switch-mode-frequency = <1200000>;
++ };
++
++ smb208_s2a: s2a {
++ regulator-min-microvolt = < 800000>;
++ regulator-max-microvolt = <1150000>;
++
++ qcom,switch-mode-frequency = <1200000>;
++ };
++
++ smb208_s2b: s2b {
++ regulator-min-microvolt = < 800000>;
++ regulator-max-microvolt = <1150000>;
++
++ qcom,switch-mode-frequency = <1200000>;
++ };
++ };
++};
+--- /dev/null
++++ b/arch/arm/boot/dts/qcom-ipq8062.dtsi
+@@ -0,0 +1,8 @@
++// SPDX-License-Identifier: GPL-2.0-only
++
++#include "qcom-ipq8064-v2.0.dtsi"
++
++/ {
++ model = "Qualcomm Technologies, Inc. IPQ8062";
++ compatible = "qcom,ipq8062", "qcom,ipq8064";
++};
--- /dev/null
+From 01e7aa3fe6f76f7960f2382038136235eee9c6cd Mon Sep 17 00:00:00 2001
+From: Christian Marangi <ansuelsmth@gmail.com>
+Date: Mon, 18 Jul 2022 18:09:35 +0200
+Subject: [PATCH 3/3] ARM: dts: qcom: ipq8064: add ipq8065 variant
+
+ipq8065 SoC is based on ipq8064-v2.0 with a more clocked CPU and
+an increased voltage output with the smb208 regulators.
+
+Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
+---
+ arch/arm/boot/dts/qcom-ipq8065-smb208.dtsi | 37 ++++++++++++++++++++++
+ arch/arm/boot/dts/qcom-ipq8065.dtsi | 8 +++++
+ 2 files changed, 45 insertions(+)
+ create mode 100644 arch/arm/boot/dts/qcom-ipq8065-smb208.dtsi
+ create mode 100644 arch/arm/boot/dts/qcom-ipq8065.dtsi
+
+--- /dev/null
++++ b/arch/arm/boot/dts/qcom-ipq8065-smb208.dtsi
+@@ -0,0 +1,37 @@
++// SPDX-License-Identifier: GPL-2.0
++
++#include "qcom-ipq8065.dtsi"
++
++&rpm {
++ smb208_regulators: regulators {
++ compatible = "qcom,rpm-smb208-regulators";
++
++ smb208_s1a: s1a {
++ regulator-min-microvolt = <1050000>;
++ regulator-max-microvolt = <1150000>;
++
++ qcom,switch-mode-frequency = <1200000>;
++ };
++
++ smb208_s1b: s1b {
++ regulator-min-microvolt = <1050000>;
++ regulator-max-microvolt = <1150000>;
++
++ qcom,switch-mode-frequency = <1200000>;
++ };
++
++ smb208_s2a: s2a {
++ regulator-min-microvolt = <775000>;
++ regulator-max-microvolt = <1275000>;
++
++ qcom,switch-mode-frequency = <1200000>;
++ };
++
++ smb208_s2b: s2b {
++ regulator-min-microvolt = <775000>;
++ regulator-max-microvolt = <1275000>;
++
++ qcom,switch-mode-frequency = <1200000>;
++ };
++ };
++};
+--- /dev/null
++++ b/arch/arm/boot/dts/qcom-ipq8065.dtsi
+@@ -0,0 +1,8 @@
++// SPDX-License-Identifier: GPL-2.0
++
++#include "qcom-ipq8064-v2.0.dtsi"
++
++/ {
++ model = "Qualcomm Technologies, Inc. IPQ8065";
++ compatible = "qcom,ipq8065", "qcom,ipq8064";
++};
--- /dev/null
+From bef5018abb7cf94efafdc05087b4c998891ae4ec Mon Sep 17 00:00:00 2001
+From: Ansuel Smith <ansuelsmth@gmail.com>
+Date: Mon, 17 Jan 2022 23:39:34 +0100
+Subject: [PATCH v3 10/18] ARM: dts: qcom: add saw for l2 cache and kraitcc for
+ ipq8064
+
+Add saw compatible for l2 cache and kraitcc node for ipq8064 dtsi.
+Also declare clock-output-names for acc0 and acc1 and qsb fixed clock
+for the secondary mux.
+
+Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
+Tested-by: Jonathan McDowell <noodles@earth.li>
+---
+ arch/arm/boot/dts/qcom-ipq8064.dtsi | 34 +++++++++++++++++++++++++++--
+ 1 file changed, 32 insertions(+), 2 deletions(-)
+
+--- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
++++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
+@@ -301,6 +301,12 @@
+ };
+
+ clocks {
++// qsb: qsb {
++// compatible = "fixed-clock";
++// clock-frequency = <384000000>;
++// #clock-cells = <0>;
++// };
++
+ cxo_board: cxo_board {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+@@ -503,11 +509,19 @@
+ acc0: clock-controller@2088000 {
+ compatible = "qcom,kpss-acc-v1";
+ reg = <0x02088000 0x1000>, <0x02008000 0x1000>;
++ clock-output-names = "acpu0_aux";
++ clocks = <&gcc PLL8_VOTE>, <&pxo_board>;
++ clock-names = "pll8_vote", "pxo";
++ #clock-cells = <0>;
+ };
+
+ acc1: clock-controller@2098000 {
+ compatible = "qcom,kpss-acc-v1";
+ reg = <0x02098000 0x1000>, <0x02008000 0x1000>;
++ clock-output-names = "acpu1_aux";
++ clocks = <&gcc PLL8_VOTE>, <&pxo_board>;
++ clock-names = "pll8_vote", "pxo";
++ #clock-cells = <0>;
+ };
+
+ adm_dma: dma-controller@18300000 {
+@@ -531,17 +545,23 @@
+ };
+
+ saw0: regulator@2089000 {
+- compatible = "qcom,saw2";
++ compatible = "qcom,saw2", "qcom,apq8064-saw2-v1.1-cpu", "syscon";
+ reg = <0x02089000 0x1000>, <0x02009000 0x1000>;
+ regulator;
+ };
+
+ saw1: regulator@2099000 {
+- compatible = "qcom,saw2";
++ compatible = "qcom,saw2", "qcom,apq8064-saw2-v1.1-cpu", "syscon";
+ reg = <0x02099000 0x1000>, <0x02009000 0x1000>;
+ regulator;
+ };
+
++ saw_l2: regulator@02012000 {
++ compatible = "qcom,saw2", "syscon";
++ reg = <0x02012000 0x1000>;
++ regulator;
++ };
++
+ gsbi1: gsbi@12440000 {
+ compatible = "qcom,gsbi-v1.0.0";
+ reg = <0x12440000 0x100>;
+@@ -920,6 +940,17 @@
+ clocks = <&gcc PLL8_VOTE>, <&pxo_board>;
+ clock-names = "pll8_vote", "pxo";
+ clock-output-names = "acpu_l2_aux";
++ #clock-cells = <0>;
++ };
++
++ kraitcc: clock-controller {
++ compatible = "qcom,krait-cc-v1";
++ clocks = <&gcc PLL9>, <&gcc PLL10>, <&gcc PLL12>,
++ <&acc0>, <&acc1>, <&l2cc>; // <&qsb>
++ clock-names = "hfpll0", "hfpll1", "hfpll_l2",
++ "acpu0_aux", "acpu1_aux", "acpu_l2_aux";
++// "qsb";
++ #clock-cells = <1>;
+ };
+
+ lcc: clock-controller@28000000 {
--- /dev/null
+From 076ebb6e1799c4c7a1d2e07510d88b9e9b57b551 Mon Sep 17 00:00:00 2001
+From: Ansuel Smith <ansuelsmth@gmail.com>
+Date: Tue, 18 Jan 2022 00:03:47 +0100
+Subject: [PATCH v3 13/18] ARM: dts: qcom: add opp table for cpu and l2 for
+ ipq8064
+
+Add opp table for cpu and l2 cache. While the current cpufreq is
+the generic one that doesn't scale the L2 cache, we add the l2
+cache opp anyway for the sake of completeness. This will be handy in the
+future when a dedicated cpufreq driver is introduced for krait cores
+that will correctly scale l2 cache with the core freq.
+
+Opp-level is set based on the logic of
+0: idle level
+1: normal level
+2: turbo level
+
+Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
+Tested-by: Jonathan McDowell <noodles@earth.li>
+---
+ arch/arm/boot/dts/qcom-ipq8064.dtsi | 99 +++++++++++++++++++++++++++++
+ 1 file changed, 99 insertions(+)
+
+--- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
++++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
+@@ -48,6 +48,105 @@
+ };
+ };
+
++ opp_table_l2: opp_table_l2 {
++ compatible = "operating-points-v2";
++
++ opp-384000000 {
++ opp-hz = /bits/ 64 <384000000>;
++ opp-microvolt = <1100000>;
++ clock-latency-ns = <100000>;
++ opp-level = <0>;
++ };
++
++ opp-1000000000 {
++ opp-hz = /bits/ 64 <1000000000>;
++ opp-microvolt = <1100000>;
++ clock-latency-ns = <100000>;
++ opp-level = <1>;
++ };
++
++ opp-1200000000 {
++ opp-hz = /bits/ 64 <1200000000>;
++ opp-microvolt = <1150000>;
++ clock-latency-ns = <100000>;
++ opp-level = <2>;
++ };
++ };
++
++ opp_table0: opp_table0 {
++ compatible = "operating-points-v2-kryo-cpu";
++ nvmem-cells = <&speedbin_efuse>;
++
++ /*
++ * Voltage thresholds are <target min max>
++ */
++ opp-384000000 {
++ opp-hz = /bits/ 64 <384000000>;
++ opp-microvolt-speed0-pvs0-v0 = <1000000 950000 1050000>;
++ opp-microvolt-speed0-pvs1-v0 = <925000 878750 971250>;
++ opp-microvolt-speed0-pvs2-v0 = <875000 831250 918750>;
++ opp-microvolt-speed0-pvs3-v0 = <800000 760000 840000>;
++ opp-supported-hw = <0x1>;
++ clock-latency-ns = <100000>;
++ opp-level = <0>;
++ };
++
++ opp-600000000 {
++ opp-hz = /bits/ 64 <600000000>;
++ opp-microvolt-speed0-pvs0-v0 = <1050000 997500 1102500>;
++ opp-microvolt-speed0-pvs1-v0 = <975000 926250 1023750>;
++ opp-microvolt-speed0-pvs2-v0 = <925000 878750 971250>;
++ opp-microvolt-speed0-pvs3-v0 = <850000 807500 892500>;
++ opp-supported-hw = <0x1>;
++ clock-latency-ns = <100000>;
++ opp-level = <1>;
++ };
++
++ opp-800000000 {
++ opp-hz = /bits/ 64 <800000000>;
++ opp-microvolt-speed0-pvs0-v0 = <1100000 1045000 1155000>;
++ opp-microvolt-speed0-pvs1-v0 = <1025000 973750 1076250>;
++ opp-microvolt-speed0-pvs2-v0 = <995000 945250 1044750>;
++ opp-microvolt-speed0-pvs3-v0 = <900000 855000 945000>;
++ opp-supported-hw = <0x1>;
++ clock-latency-ns = <100000>;
++ opp-level = <1>;
++ };
++
++ opp-1000000000 {
++ opp-hz = /bits/ 64 <1000000000>;
++ opp-microvolt-speed0-pvs0-v0 = <1150000 1092500 1207500>;
++ opp-microvolt-speed0-pvs1-v0 = <1075000 1021250 1128750>;
++ opp-microvolt-speed0-pvs2-v0 = <1025000 973750 1076250>;
++ opp-microvolt-speed0-pvs3-v0 = <950000 902500 997500>;
++ opp-supported-hw = <0x1>;
++ clock-latency-ns = <100000>;
++ opp-level = <1>;
++ };
++
++ opp-1200000000 {
++ opp-hz = /bits/ 64 <1200000000>;
++ opp-microvolt-speed0-pvs0-v0 = <1200000 1140000 1260000>;
++ opp-microvolt-speed0-pvs1-v0 = <1125000 1068750 1181250>;
++ opp-microvolt-speed0-pvs2-v0 = <1075000 1021250 1128750>;
++ opp-microvolt-speed0-pvs3-v0 = <1000000 950000 1050000>;
++ opp-supported-hw = <0x1>;
++ clock-latency-ns = <100000>;
++ opp-level = <2>;
++ };
++
++ opp-1400000000 {
++ opp-hz = /bits/ 64 <1400000000>;
++ opp-microvolt-speed0-pvs0-v0 = <1250000 1187500 1312500>;
++ opp-microvolt-speed0-pvs1-v0 = <1175000 1116250 1233750>;
++ opp-microvolt-speed0-pvs2-v0 = <1125000 1068750 1181250>;
++ opp-microvolt-speed0-pvs3-v0 = <1050000 997500 1102500>;
++ opp-supported-hw = <0x1>;
++ clock-latency-ns = <100000>;
++ opp-level = <2>;
++ };
++ };
++
+ thermal-zones {
+ tsens_tz_sensor0 {
+ polling-delay-passive = <0>;
+--- a/arch/arm/boot/dts/qcom-ipq8065.dtsi
++++ b/arch/arm/boot/dts/qcom-ipq8065.dtsi
+@@ -6,3 +6,92 @@
+ model = "Qualcomm Technologies, Inc. IPQ8065";
+ compatible = "qcom,ipq8065", "qcom,ipq8064";
+ };
++
++&opp_table_l2 {
++ /delete-node/opp-1200000000;
++
++ opp-1400000000 {
++ opp-hz = /bits/ 64 <1400000000>;
++ opp-microvolt = <1150000>;
++ clock-latency-ns = <100000>;
++ opp-level = <2>;
++ };
++};
++
++&opp_table0 {
++ /*
++ * On ipq8065 1.2 ghz freq is not present
++ * Remove it to make cpufreq work and not
++ * complain for missing definition
++ */
++
++ /delete-node/opp-1200000000;
++
++ /*
++ * Voltage thresholds are <target min max>
++ */
++ opp-384000000 {
++ opp-microvolt-speed0-pvs0-v0 = <975000 926250 1023750>;
++ opp-microvolt-speed0-pvs1-v0 = <950000 902500 997500>;
++ opp-microvolt-speed0-pvs2-v0 = <925000 878750 971250>;
++ opp-microvolt-speed0-pvs3-v0 = <900000 855000 945000>;
++ opp-microvolt-speed0-pvs4-v0 = <875000 831250 918750>;
++ opp-microvolt-speed0-pvs5-v0 = <825000 783750 866250>;
++ opp-microvolt-speed0-pvs6-v0 = <775000 736250 813750>;
++ };
++
++ opp-600000000 {
++ opp-microvolt-speed0-pvs0-v0 = <1000000 950000 1050000>;
++ opp-microvolt-speed0-pvs1-v0 = <975000 926250 1023750>;
++ opp-microvolt-speed0-pvs2-v0 = <950000 902500 997500>;
++ opp-microvolt-speed0-pvs3-v0 = <925000 878750 971250>;
++ opp-microvolt-speed0-pvs4-v0 = <900000 855000 945000>;
++ opp-microvolt-speed0-pvs5-v0 = <850000 807500 892500>;
++ opp-microvolt-speed0-pvs6-v0 = <800000 760000 840000>;
++ };
++
++ opp-800000000 {
++ opp-microvolt-speed0-pvs0-v0 = <1050000 997500 1102500>;
++ opp-microvolt-speed0-pvs1-v0 = <1025000 973750 1076250>;
++ opp-microvolt-speed0-pvs2-v0 = <1000000 950000 1050000>;
++ opp-microvolt-speed0-pvs3-v0 = <975000 926250 1023750>;
++ opp-microvolt-speed0-pvs4-v0 = <950000 902500 997500>;
++ opp-microvolt-speed0-pvs5-v0 = <900000 855000 945000>;
++ opp-microvolt-speed0-pvs6-v0 = <850000 807500 892500>;
++ };
++
++ opp-1000000000 {
++ opp-microvolt-speed0-pvs0-v0 = <1100000 1045000 1155000>;
++ opp-microvolt-speed0-pvs1-v0 = <1075000 1021250 1128750>;
++ opp-microvolt-speed0-pvs2-v0 = <1050000 997500 1102500>;
++ opp-microvolt-speed0-pvs3-v0 = <1025000 973750 1076250>;
++ opp-microvolt-speed0-pvs4-v0 = <1000000 950000 1050000>;
++ opp-microvolt-speed0-pvs5-v0 = <950000 902500 997500>;
++ opp-microvolt-speed0-pvs6-v0 = <900000 855000 945000>;
++ };
++
++ opp-1400000000 {
++ opp-microvolt-speed0-pvs0-v0 = <1175000 1116250 1233750>;
++ opp-microvolt-speed0-pvs1-v0 = <1150000 1092500 1207500>;
++ opp-microvolt-speed0-pvs2-v0 = <1125000 1068750 1181250>;
++ opp-microvolt-speed0-pvs3-v0 = <1100000 1045000 1155000>;
++ opp-microvolt-speed0-pvs4-v0 = <1075000 1021250 1128750>;
++ opp-microvolt-speed0-pvs5-v0 = <1025000 973750 1076250>;
++ opp-microvolt-speed0-pvs6-v0 = <975000 926250 1023750>;
++ opp-level = <1>;
++ };
++
++ opp-1725000000 {
++ opp-hz = /bits/ 64 <1725000000>;
++ opp-microvolt-speed0-pvs0-v0 = <1262500 1199375 1325625>;
++ opp-microvolt-speed0-pvs1-v0 = <1225000 1163750 1286250>;
++ opp-microvolt-speed0-pvs2-v0 = <1200000 1140000 1260000>;
++ opp-microvolt-speed0-pvs3-v0 = <1175000 1116250 1233750>;
++ opp-microvolt-speed0-pvs4-v0 = <1150000 1092500 1207500>;
++ opp-microvolt-speed0-pvs5-v0 = <1100000 1045000 1155000>;
++ opp-microvolt-speed0-pvs6-v0 = <1050000 997500 1102500>;
++ opp-supported-hw = <0x1>;
++ clock-latency-ns = <100000>;
++ opp-level = <2>;
++ };
++};
+--- a/arch/arm/boot/dts/qcom-ipq8062.dtsi
++++ b/arch/arm/boot/dts/qcom-ipq8062.dtsi
+@@ -6,3 +6,39 @@
+ model = "Qualcomm Technologies, Inc. IPQ8062";
+ compatible = "qcom,ipq8062", "qcom,ipq8064";
+ };
++
++&opp_table0 {
++ /delete-node/opp-1200000000;
++ /delete-node/opp-1400000000;
++
++ /*
++ * Voltage thresholds are <target min max>
++ */
++ opp-384000000 {
++ opp-microvolt-speed0-pvs0-v0 = <1000000 950000 1050000>;
++ opp-microvolt-speed0-pvs1-v0 = < 925000 878750 971250>;
++ opp-microvolt-speed0-pvs2-v0 = < 875000 831250 918750>;
++ opp-microvolt-speed0-pvs3-v0 = < 800000 760000 840000>;
++ };
++
++ opp-600000000 {
++ opp-microvolt-speed0-pvs0-v0 = <1050000 997500 1102500>;
++ opp-microvolt-speed0-pvs1-v0 = < 975000 926250 1023750>;
++ opp-microvolt-speed0-pvs2-v0 = < 925000 878750 971250>;
++ opp-microvolt-speed0-pvs3-v0 = < 850000 807500 892500>;
++ };
++
++ opp-800000000 {
++ opp-microvolt-speed0-pvs0-v0 = <1100000 1045000 1155000>;
++ opp-microvolt-speed0-pvs1-v0 = <1025000 973750 1076250>;
++ opp-microvolt-speed0-pvs2-v0 = < 995000 945250 1044750>;
++ opp-microvolt-speed0-pvs3-v0 = < 900000 855000 945000>;
++ };
++
++ opp-1000000000 {
++ opp-microvolt-speed0-pvs0-v0 = <1150000 1092500 1207500>;
++ opp-microvolt-speed0-pvs1-v0 = <1075000 1021250 1128750>;
++ opp-microvolt-speed0-pvs2-v0 = <1025000 973750 1076250>;
++ opp-microvolt-speed0-pvs3-v0 = < 950000 902500 997500>;
++ };
++};
--- /dev/null
+From 211fc0c0a63c99b68663a27182e643316c2d8cbe Mon Sep 17 00:00:00 2001
+From: Ansuel Smith <ansuelsmth@gmail.com>
+Date: Tue, 18 Jan 2022 00:07:57 +0100
+Subject: [PATCH v3 15/18] ARM: dts: qcom: add multiple missing binding for cpu
+ and l2 for ipq8064
+
+Add multiple binding for cpu node, l2 node and add idle-states
+definition for ipq8064 dtsi.
+
+Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
+Tested-by: Jonathan McDowell <noodles@earth.li>
+---
+ arch/arm/boot/dts/qcom-ipq8064.dtsi | 36 +++++++++++++++++++++++++++++
+ 1 file changed, 36 insertions(+)
+
+--- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
++++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
+@@ -30,6 +30,15 @@
+ next-level-cache = <&L2>;
+ qcom,acc = <&acc0>;
+ qcom,saw = <&saw0>;
++ clocks = <&kraitcc 0>, <&kraitcc 4>;
++ clock-names = "cpu", "l2";
++ clock-latency = <100000>;
++ operating-points-v2 = <&opp_table0>;
++ voltage-tolerance = <5>;
++ cooling-min-state = <0>;
++ cooling-max-state = <10>;
++ #cooling-cells = <2>;
++ cpu-idle-states = <&CPU_SPC>;
+ };
+
+ cpu1: cpu@1 {
+@@ -40,11 +49,35 @@
+ next-level-cache = <&L2>;
+ qcom,acc = <&acc1>;
+ qcom,saw = <&saw1>;
++ clocks = <&kraitcc 1>, <&kraitcc 4>;
++ clock-names = "cpu", "l2";
++ clock-latency = <100000>;
++ operating-points-v2 = <&opp_table0>;
++ voltage-tolerance = <5>;
++ cooling-min-state = <0>;
++ cooling-max-state = <10>;
++ #cooling-cells = <2>;
++ cpu-idle-states = <&CPU_SPC>;
++ };
++
++ idle-states {
++ CPU_SPC: spc {
++ compatible = "qcom,idle-state-spc";
++ status = "disabled";
++ entry-latency-us = <400>;
++ exit-latency-us = <900>;
++ min-residency-us = <3000>;
++ };
+ };
+
+ L2: l2-cache {
+ compatible = "cache";
+ cache-level = <2>;
++ qcom,saw = <&saw_l2>;
++
++ clocks = <&kraitcc 4>;
++ clock-names = "l2";
++ operating-points-v2 = <&opp_table_l2>;
+ };
+ };
+
+--- a/arch/arm/boot/dts/qcom-ipq8064-smb208.dtsi
++++ b/arch/arm/boot/dts/qcom-ipq8064-smb208.dtsi
+@@ -2,6 +2,18 @@
+
+ #include "qcom-ipq8064.dtsi"
+
++&cpu0 {
++ cpu-supply = <&smb208_s2a>;
++};
++
++&cpu1 {
++ cpu-supply = <&smb208_s2b>;
++};
++
++&L2 {
++ l2-supply = <&smb208_s1a>;
++};
++
+ &rpm {
+ smb208_regulators: regulators {
+ compatible = "qcom,rpm-smb208-regulators";
+--- a/arch/arm/boot/dts/qcom-ipq8064-v2.0-smb208.dtsi
++++ b/arch/arm/boot/dts/qcom-ipq8064-v2.0-smb208.dtsi
+@@ -2,6 +2,18 @@
+
+ #include "qcom-ipq8064-v2.0.dtsi"
+
++&cpu0 {
++ cpu-supply = <&smb208_s2a>;
++};
++
++&cpu1 {
++ cpu-supply = <&smb208_s2b>;
++};
++
++&L2 {
++ l2-supply = <&smb208_s1a>;
++};
++
+ &rpm {
+ smb208_regulators: regulators {
+ compatible = "qcom,rpm-smb208-regulators";
+--- a/arch/arm/boot/dts/qcom-ipq8062-smb208.dtsi
++++ b/arch/arm/boot/dts/qcom-ipq8062-smb208.dtsi
+@@ -2,6 +2,18 @@
+
+ #include "qcom-ipq8062.dtsi"
+
++&cpu0 {
++ cpu-supply = <&smb208_s2a>;
++};
++
++&cpu1 {
++ cpu-supply = <&smb208_s2b>;
++};
++
++&L2 {
++ l2-supply = <&smb208_s1a>;
++};
++
+ &rpm {
+ smb208_regulators: regulators {
+ compatible = "qcom,rpm-smb208-regulators";
+--- a/arch/arm/boot/dts/qcom-ipq8065-smb208.dtsi
++++ b/arch/arm/boot/dts/qcom-ipq8065-smb208.dtsi
+@@ -2,6 +2,18 @@
+
+ #include "qcom-ipq8065.dtsi"
+
++&cpu0 {
++ cpu-supply = <&smb208_s2a>;
++};
++
++&cpu1 {
++ cpu-supply = <&smb208_s2b>;
++};
++
++&L2 {
++ l2-supply = <&smb208_s1a>;
++};
++
+ &rpm {
+ smb208_regulators: regulators {
+ compatible = "qcom,rpm-smb208-regulators";
--- /dev/null
+From 6c94e0184e56f9e9f1f5d5f54b20758433e498d2 Mon Sep 17 00:00:00 2001
+From: Christian 'Ansuel' Marangi <ansuelsmth@gmail.com>
+Date: Wed, 15 Jun 2022 16:47:09 +0200
+Subject: [PATCH 1/2] ARM: dts: qcom: fix wrong nad_pins definition for ipq806x
+
+Fix wrong nand_pings definition for bias-disable pins.
+
+Signed-off-by: Christian 'Ansuel' Marangi <ansuelsmth@gmail.com>
+---
+ arch/arm/boot/dts/qcom-ipq8064.dtsi | 7 ++-----
+ 1 file changed, 2 insertions(+), 5 deletions(-)
+
+--- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
++++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
+@@ -559,12 +559,9 @@
+ };
+
+ nand_pins: nand_pins {
+- mux {
++ disable {
+ pins = "gpio34", "gpio35", "gpio36",
+- "gpio37", "gpio38", "gpio39",
+- "gpio40", "gpio41", "gpio42",
+- "gpio43", "gpio44", "gpio45",
+- "gpio46", "gpio47";
++ "gpio37", "gpio38";
+ function = "nand";
+ drive-strength = <10>;
+ bias-disable;
--- /dev/null
+From 504188183408fac0f61b59f5ed8ea1773fe43669 Mon Sep 17 00:00:00 2001
+From: Christian 'Ansuel' Marangi <ansuelsmth@gmail.com>
+Date: Wed, 15 Jun 2022 16:59:30 +0200
+Subject: [PATCH 2/2] ARM: dts: qcom: add MDIO dedicated controller node for
+ ipq806x
+
+Add MDIO dedicated controller attached to gmac0 and fix rb3011 dts to
+correctly use the new tag.
+
+Signed-off-by: Christian 'Ansuel' Marangi <ansuelsmth@gmail.com>
+---
+ arch/arm/boot/dts/qcom-ipq8064-rb3011.dts | 134 +++++++++++-----------
+ arch/arm/boot/dts/qcom-ipq8064.dtsi | 14 +++
+ 2 files changed, 81 insertions(+), 67 deletions(-)
+
+--- a/arch/arm/boot/dts/qcom-ipq8064-rb3011.dts
++++ b/arch/arm/boot/dts/qcom-ipq8064-rb3011.dts
+@@ -24,73 +24,6 @@
+ device_type = "memory";
+ };
+
+- mdio0: mdio-0 {
+- status = "okay";
+- compatible = "virtual,mdio-gpio";
+- gpios = <&qcom_pinmux 1 GPIO_ACTIVE_HIGH>,
+- <&qcom_pinmux 0 GPIO_ACTIVE_HIGH>;
+- #address-cells = <1>;
+- #size-cells = <0>;
+-
+- pinctrl-0 = <&mdio0_pins>;
+- pinctrl-names = "default";
+-
+- switch0: switch@10 {
+- compatible = "qca,qca8337";
+- #address-cells = <1>;
+- #size-cells = <0>;
+-
+- dsa,member = <0 0>;
+-
+- pinctrl-0 = <&sw0_reset_pin>;
+- pinctrl-names = "default";
+-
+- reset-gpios = <&qcom_pinmux 16 GPIO_ACTIVE_LOW>;
+- reg = <0x10>;
+-
+- ports {
+- #address-cells = <1>;
+- #size-cells = <0>;
+-
+- switch0cpu: port@0 {
+- reg = <0>;
+- label = "cpu";
+- ethernet = <&gmac0>;
+- phy-mode = "rgmii-id";
+- fixed-link {
+- speed = <1000>;
+- full-duplex;
+- };
+- };
+-
+- port@1 {
+- reg = <1>;
+- label = "sw1";
+- };
+-
+- port@2 {
+- reg = <2>;
+- label = "sw2";
+- };
+-
+- port@3 {
+- reg = <3>;
+- label = "sw3";
+- };
+-
+- port@4 {
+- reg = <4>;
+- label = "sw4";
+- };
+-
+- port@5 {
+- reg = <5>;
+- label = "sw5";
+- };
+- };
+- };
+- };
+-
+ mdio1: mdio-1 {
+ status = "okay";
+ compatible = "virtual,mdio-gpio";
+@@ -220,6 +153,73 @@
+ status = "okay";
+ };
+
++&mdio0 {
++ status = "okay";
++ compatible = "virtual,mdio-gpio";
++ gpios = <&qcom_pinmux 1 GPIO_ACTIVE_HIGH>,
++ <&qcom_pinmux 0 GPIO_ACTIVE_HIGH>;
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ pinctrl-0 = <&mdio0_pins>;
++ pinctrl-names = "default";
++
++ switch0: switch@10 {
++ compatible = "qca,qca8337";
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ dsa,member = <0 0>;
++
++ pinctrl-0 = <&sw0_reset_pin>;
++ pinctrl-names = "default";
++
++ reset-gpios = <&qcom_pinmux 16 GPIO_ACTIVE_LOW>;
++ reg = <0x10>;
++
++ ports {
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ switch0cpu: port@0 {
++ reg = <0>;
++ label = "cpu";
++ ethernet = <&gmac0>;
++ phy-mode = "rgmii-id";
++ fixed-link {
++ speed = <1000>;
++ full-duplex;
++ };
++ };
++
++ port@1 {
++ reg = <1>;
++ label = "sw1";
++ };
++
++ port@2 {
++ reg = <2>;
++ label = "sw2";
++ };
++
++ port@3 {
++ reg = <3>;
++ label = "sw3";
++ };
++
++ port@4 {
++ reg = <4>;
++ label = "sw4";
++ };
++
++ port@5 {
++ reg = <5>;
++ label = "sw5";
++ };
++ };
++ };
++};
++
+ &gmac0 {
+ status = "okay";
+
+--- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
++++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
+@@ -1446,6 +1446,20 @@
+ };
+ };
+
++ mdio0: mdio@37000000 {
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ compatible = "qcom,ipq8064-mdio", "syscon";
++ reg = <0x37000000 0x200000>;
++ resets = <&gcc GMAC_CORE1_RESET>;
++ reset-names = "stmmaceth";
++ clocks = <&gcc GMAC_CORE1_CLK>;
++ clock-names = "stmmaceth";
++
++ status = "disabled";
++ };
++
+ vsdcc_fixed: vsdcc-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "SDCC Power";
+++ /dev/null
---- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
-+++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
-@@ -689,6 +689,41 @@
- reg = <0x12100000 0x10000>;
- };
-
-+ gsbi1: gsbi@12440000 {
-+ compatible = "qcom,gsbi-v1.0.0";
-+ cell-index = <1>;
-+ reg = <0x12440000 0x100>;
-+ clocks = <&gcc GSBI1_H_CLK>;
-+ clock-names = "iface";
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+ ranges;
-+ status = "disabled";
-+
-+ syscon-tcsr = <&tcsr>;
-+
-+ gsbi1_serial: serial@12450000 {
-+ compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
-+ reg = <0x12450000 0x100>,
-+ <0x12400000 0x03>;
-+ interrupts = <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>;
-+ clocks = <&gcc GSBI1_UART_CLK>, <&gcc GSBI1_H_CLK>;
-+ clock-names = "core", "iface";
-+ status = "disabled";
-+ };
-+
-+ gsbi1_i2c: i2c@12460000 {
-+ compatible = "qcom,i2c-qup-v1.1.1";
-+ reg = <0x12460000 0x1000>;
-+ interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>;
-+ clocks = <&gcc GSBI1_QUP_CLK>, <&gcc GSBI1_H_CLK>;
-+ clock-names = "core", "iface";
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+ status = "disabled";
-+ };
-+ };
-+
- gsbi2: gsbi@12480000 {
- compatible = "qcom,gsbi-v1.0.0";
- cell-index = <2>;
projects / openwrt / openwrt.git / commitdiff