octeon: add new target and support for Ubiquiti EdgeRouter 6P
authorDan Brown <danbrown@gmail.com>
Wed, 12 May 2021 12:48:01 +0000 (14:48 +0200)
committerAdrian Schmutzler <freifunk@adrianschmutzler.de>
Sun, 16 May 2021 23:01:26 +0000 (01:01 +0200)
Ubiquiti EdgeRouter 6P is 6 port router with similar
specifications as the EdgeRouter 4, support for which was added
in commit dd651e54cc5eadba480a56a7d2c18471e560f491

There are five 10/100/1000 Mbps RJ/Copper ports and
one 1000 Mbps SFP port.

SoC: Octeon Cavium 7130 (Cavium 3) at 1000MHz
Memory: 1GiB DDR3
Flash: 2x2M chips with uboots (chainloaded) + 512K eeprom
LEDs: 1x for power status (white/blue, controllable)
  and 6x for ethernet and SFP ports (no control over them)
Buttons: 1x Reset
Serial: 1x RJ45 port on front panel. 115200 baud, 8N1
USB: 1x USB3.0 on front panel
MII: 1x QSGMII from SoC
PHY: 1x Vitesse VSC8504 of which 4 ports are used (phys 4-7)
     1x Vitesse VSC8514 of which 2 ports are used (phys 8-9)

Network port mapping
 - eth0 on device maps to lan0 and phy5
 - eth1 on device maps to lan1 and phy6
 - eth2 on device maps to lan2 and phy7
 - eth3 on device maps to lan3 and phy8
 - eth4 on device maps to lan4 and phy9
 - eth5 (SFP) on device maps to lan5 and phy4

What is not working:
 - There is no port status available before it goes up
 - SFP have no additional status and presented as no different from eth
 - Power-over-ethernet (passive) support has not been tested

How to flash the firmware:
  - copy openwrt-octeon-ubnt_edgerouter-6p-initramfs-kernel.bin and
    openwrt-octeon-ubnt_edgerouter-6p-squashfs-sysupgrade.tar to
    USB flash drive that is formatted to vfat/fat32
  - connect USB flash drive to EdgeRouter 6P front USB port
  - connect serial cable using front RJ45 port (115200 baud, 8N1)
  - connect power to cable to EdgeRouter 6P
  - connect terminal to the console to see uboot boot process
  - interrupt boot by pressing button(s) on your keyboard to log
    in to the uboot
  - detect usb connected flash drives by typing to the console:
    usb start
  - after drive is detected load initramfs+kernel to the memory by typing:
    fatload usb 0:1 0x20000000 openwrt-octeon-ubnt_edgerouter-6p-initramfs-kernel.bin
  - after initramfs+kernel is loaded to the memory load it by typing:
    bootoctlinux 0 numcores=4 endbootargs mem=0
  - boot process should finish and you will be greeted with console
    after pressing enter
  - create directory to mount usb flash drive to by typing:
    mkdir /tmp/sda
  - mount flash drive to that directory by typing:
    mount /dev/sda1 /tmp/sda
  - flash firmware to router internal storage by typing:
    sysupgrade /tmp/sda/openwrt-octeon-ubnt_edgerouter-6p-squashfs-sysupgrade.tar
  - device will reboot and after it gets up you will have
    edgerouter 6p running openwrt

Signed-off-by: Dan Brown <danbrown@gmail.com>
[reorder/squash patches, move ethernet@0 to DTS, share image setup]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
target/linux/octeon/base-files/etc/board.d/01_network
target/linux/octeon/base-files/lib/preinit/79_move_config
target/linux/octeon/base-files/lib/upgrade/platform.sh
target/linux/octeon/files/arch/mips/boot/dts/cavium-octeon/cn7130_ubnt_edgerouter-6p.dts [new file with mode: 0644]
target/linux/octeon/image/Makefile

index e62d3c28bfa25bbcff8712ead335b0ccb57ff8ec..194faeaad961ff12e7b80e9e2bb2e30abd0b5d39 100644 (file)
@@ -13,6 +13,9 @@ itus,shield-router)
 ubnt,edgerouter-4)
        ucidef_set_interfaces_lan_wan "lan1 lan2 lan3" "lan0"
        ;;
+ubnt,edgerouter-6p)
+       ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4 lan5" "lan0"
+       ;;
 *)
        ucidef_set_interfaces_lan_wan "eth0" "eth1"
        ;;
index 5a84e6f18a68ae50b51375a719e29fe272e31133..ae155a3c5cbaabf52bb28c418461878ff011a0be 100644 (file)
@@ -21,7 +21,8 @@ octeon_move_config() {
                itus,shield-router)
                        move_config "/dev/mmcblk1p1"
                        ;;
-               ubnt,edgerouter-4)
+               ubnt,edgerouter-4 | \
+               ubnt,edgerouter-6p)
                        move_config "/dev/mmcblk0p1"
                        ;;
        esac
index ad5baef4a19fd95a747f5739abdf93c6d4bd1681..255699bb31978725f1d213907b68bb535dee1ba6 100755 (executable)
@@ -29,7 +29,8 @@ platform_copy_config() {
                cp -af "$UPGRADE_BACKUP" "/mnt/$BACKUP_FILE"
                umount /mnt
                ;;
-       ubnt,edgerouter-4)
+       ubnt,edgerouter-4 | \
+       ubnt,edgerouter-6p)
                mount -t vfat /dev/mmcblk0p1 /mnt
                cp -af "$UPGRADE_BACKUP" "/mnt/$BACKUP_FILE"
                umount /mnt
@@ -84,7 +85,8 @@ platform_do_upgrade() {
        [ -b "${rootfs}" ] || return 1
        case "$board" in
        er | \
-       ubnt,edgerouter-4)
+       ubnt,edgerouter-4 | \
+       ubnt,edgerouter-6p)
                kernel=mmcblk0p1
                ;;
        erlite)
@@ -114,7 +116,8 @@ platform_check_image() {
        er | \
        erlite | \
        itus,shield-router | \
-       ubnt,edgerouter-4)
+       ubnt,edgerouter-4 | \
+       ubnt,edgerouter-6p)
                local kernel_length=$(tar xf $tar_file $board_dir/kernel -O | wc -c 2> /dev/null)
                local rootfs_length=$(tar xf $tar_file $board_dir/root -O | wc -c 2> /dev/null)
                [ "$kernel_length" = 0 -o "$rootfs_length" = 0 ] && {
diff --git a/target/linux/octeon/files/arch/mips/boot/dts/cavium-octeon/cn7130_ubnt_edgerouter-6p.dts b/target/linux/octeon/files/arch/mips/boot/dts/cavium-octeon/cn7130_ubnt_edgerouter-6p.dts
new file mode 100644 (file)
index 0000000..7d31885
--- /dev/null
@@ -0,0 +1,60 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "cn7130_ubnt_edgerouter-e300.dtsi"
+
+/ {
+       compatible = "ubnt,edgerouter-6p", "cavium,cn7130";
+       model = "Ubiquiti EdgeRouter 6P";
+};
+
+&smi0 {
+       phy8: ethernet-phy@8 {
+               device_type = "ethernet-phy";
+               interrupts = <17 8>;
+               interrupt-parent = <&gpio>;
+               compatible = "vitesse,vsc8514", "ethernet-phy-ieee802.3-c22";
+               reg = <8>;
+       };
+
+       phy9: ethernet-phy@9 {
+               device_type = "ethernet-phy";
+               interrupts = <17 8>;
+               interrupt-parent = <&gpio>;
+               compatible = "vitesse,vsc8514", "ethernet-phy-ieee802.3-c22";
+               reg = <9>;
+       };
+};
+
+&pip {
+       interface@0 {
+               ethernet@0 {
+                       label = "lan5";
+                       status = "okay";
+                       phy-mode = "sgmii";
+                       phy-handle = <&phy4>;
+                       mtd-mac-address = <&eeprom 0>;
+               };
+       };
+
+       interface@1 {
+               status = "okay";
+
+               ethernet@0 {
+                       label = "lan3";
+                       status = "okay";
+                       phy-mode = "sgmii";
+                       phy-handle = <&phy8>;
+                       mtd-mac-address = <&eeprom 0>;
+                       mtd-mac-address-increment = <(4)>;
+               };
+
+               ethernet@1 {
+                       label = "lan4";
+                       status = "okay";
+                       phy-mode = "sgmii";
+                       phy-handle = <&phy9>;
+                       mtd-mac-address = <&eeprom 0>;
+                       mtd-mac-address-increment = <(5)>;
+               };
+       };
+};
index 11da22df3bd49f467e2fba5e7da59d807cefe766..f77159e1f93b32a812aa241d183929ce0447bdb3 100644 (file)
@@ -51,17 +51,28 @@ define Device/ubnt_edgerouter
 endef
 TARGET_DEVICES += ubnt_edgerouter
 
-define Device/ubnt_edgerouter-4
+define Device/ubnt_edgerouter-e300
   DEVICE_VENDOR := Ubiquiti
-  DEVICE_MODEL := EdgeRouter 4
-  DEVICE_DTS := cn7130_ubnt_edgerouter-4
   DEVICE_PACKAGES += kmod-gpio-button-hotplug kmod-leds-gpio kmod-of-mdio kmod-sfp kmod-usb3 kmod-usb-dwc3 kmod-usb-storage-uas
   KERNEL := kernel-bin | patch-cmdline | append-dtb-to-elf
   KERNEL_DEPENDS := $$(wildcard $(DTS_DIR)/$(DEVICE_DTS).dts)
   CMDLINE := root=/dev/mmcblk0p2 rootfstype=squashfs,ext4 rootwait
 endef
+
+define Device/ubnt_edgerouter-4
+  $(Device/ubnt_edgerouter-e300)
+  DEVICE_MODEL := EdgeRouter 4
+  DEVICE_DTS := cn7130_ubnt_edgerouter-4
+endef
 TARGET_DEVICES += ubnt_edgerouter-4
 
+define Device/ubnt_edgerouter-6p
+  $(Device/ubnt_edgerouter-e300)
+  DEVICE_MODEL := EdgeRouter 6P
+  DEVICE_DTS := cn7130_ubnt_edgerouter-6p
+endef
+TARGET_DEVICES += ubnt_edgerouter-6p
+
 ERLITE_CMDLINE:=-mtdparts=phys_mapped_flash:512k(boot0)ro,512k(boot1)ro,64k(eeprom)ro root=/dev/sda2 rootfstype=squashfs,ext4 rootwait
 define Device/ubnt_edgerouter-lite
   DEVICE_VENDOR := Ubiquiti