adm5120: remove patches/configs for unused kernel versions
authorFelix Fietkau <nbd@openwrt.org>
Sun, 17 Apr 2011 18:39:32 +0000 (18:39 +0000)
committerFelix Fietkau <nbd@openwrt.org>
Sun, 17 Apr 2011 18:39:32 +0000 (18:39 +0000)
SVN-Revision: 26706

62 files changed:
target/linux/adm5120/patches-2.6.35/001-adm5120.patch [deleted file]
target/linux/adm5120/patches-2.6.35/002-adm5120_flash.patch [deleted file]
target/linux/adm5120/patches-2.6.35/003-adm5120_switch.patch [deleted file]
target/linux/adm5120/patches-2.6.35/005-adm5120_usb.patch [deleted file]
target/linux/adm5120/patches-2.6.35/007-adm5120_pci.patch [deleted file]
target/linux/adm5120/patches-2.6.35/009-adm5120_leds_switch_trigger.patch [deleted file]
target/linux/adm5120/patches-2.6.35/101-cfi_fixup_macronix_bootloc.patch [deleted file]
target/linux/adm5120/patches-2.6.35/102-jedec_pmc_39lvxxx_chips.patch [deleted file]
target/linux/adm5120/patches-2.6.35/103-mtd_trxsplit.patch [deleted file]
target/linux/adm5120/patches-2.6.35/120-rb153_cf_driver.patch [deleted file]
target/linux/adm5120/patches-2.6.35/200-amba_pl010_hacks.patch [deleted file]
target/linux/adm5120/patches-2.6.35/201-amba_bus_hacks.patch [deleted file]
target/linux/adm5120/patches-2.6.35/203-gpio_leds_brightness.patch [deleted file]
target/linux/adm5120/patches-2.6.35/310-adm5120_wdt.patch [deleted file]
target/linux/adm5120/patches-2.6.35/901-adm5120-usb-fix-compiler-warning.patch [deleted file]
target/linux/adm5120/patches-2.6.35/902-adm5120-usb-remove-dev-power-power_state.patch [deleted file]
target/linux/adm5120/patches-2.6.35/903-adm5120-usb-use-the-admhcd-structure-directly-in-debugfs-files.patch [deleted file]
target/linux/adm5120/patches-2.6.35/906-adm5120sw-mc_count-fix.patch [deleted file]
target/linux/adm5120/patches-2.6.36/001-adm5120.patch [deleted file]
target/linux/adm5120/patches-2.6.36/002-adm5120_flash.patch [deleted file]
target/linux/adm5120/patches-2.6.36/003-adm5120_switch.patch [deleted file]
target/linux/adm5120/patches-2.6.36/005-adm5120_usb.patch [deleted file]
target/linux/adm5120/patches-2.6.36/007-adm5120_pci.patch [deleted file]
target/linux/adm5120/patches-2.6.36/009-adm5120_leds_switch_trigger.patch [deleted file]
target/linux/adm5120/patches-2.6.36/101-cfi_fixup_macronix_bootloc.patch [deleted file]
target/linux/adm5120/patches-2.6.36/102-jedec_pmc_39lvxxx_chips.patch [deleted file]
target/linux/adm5120/patches-2.6.36/103-mtd_trxsplit.patch [deleted file]
target/linux/adm5120/patches-2.6.36/120-rb153_cf_driver.patch [deleted file]
target/linux/adm5120/patches-2.6.36/200-amba_pl010_hacks.patch [deleted file]
target/linux/adm5120/patches-2.6.36/201-amba_bus_hacks.patch [deleted file]
target/linux/adm5120/patches-2.6.36/203-gpio_leds_brightness.patch [deleted file]
target/linux/adm5120/patches-2.6.36/310-adm5120_wdt.patch [deleted file]
target/linux/adm5120/patches-2.6.36/901-adm5120-usb-fix-compiler-warning.patch [deleted file]
target/linux/adm5120/patches-2.6.36/902-adm5120-usb-remove-dev-power-power_state.patch [deleted file]
target/linux/adm5120/patches-2.6.36/903-adm5120-usb-use-the-admhcd-structure-directly-in-debugfs-files.patch [deleted file]
target/linux/adm5120/patches-2.6.36/906-adm5120sw-mc_count-fix.patch [deleted file]
target/linux/adm5120/patches-2.6.36/930-2_6_36_ports.patch [deleted file]
target/linux/adm5120/patches-2.6.37/001-adm5120.patch [deleted file]
target/linux/adm5120/patches-2.6.37/002-adm5120_flash.patch [deleted file]
target/linux/adm5120/patches-2.6.37/003-adm5120_switch.patch [deleted file]
target/linux/adm5120/patches-2.6.37/005-adm5120_usb.patch [deleted file]
target/linux/adm5120/patches-2.6.37/007-adm5120_pci.patch [deleted file]
target/linux/adm5120/patches-2.6.37/009-adm5120_leds_switch_trigger.patch [deleted file]
target/linux/adm5120/patches-2.6.37/101-cfi_fixup_macronix_bootloc.patch [deleted file]
target/linux/adm5120/patches-2.6.37/102-jedec_pmc_39lvxxx_chips.patch [deleted file]
target/linux/adm5120/patches-2.6.37/103-mtd_trxsplit.patch [deleted file]
target/linux/adm5120/patches-2.6.37/120-rb153_cf_driver.patch [deleted file]
target/linux/adm5120/patches-2.6.37/200-amba_pl010_hacks.patch [deleted file]
target/linux/adm5120/patches-2.6.37/201-amba_bus_hacks.patch [deleted file]
target/linux/adm5120/patches-2.6.37/203-gpio_leds_brightness.patch [deleted file]
target/linux/adm5120/patches-2.6.37/310-adm5120_wdt.patch [deleted file]
target/linux/adm5120/patches-2.6.37/901-adm5120-usb-fix-compiler-warning.patch [deleted file]
target/linux/adm5120/patches-2.6.37/902-adm5120-usb-remove-dev-power-power_state.patch [deleted file]
target/linux/adm5120/patches-2.6.37/903-adm5120-usb-use-the-admhcd-structure-directly-in-debugfs-files.patch [deleted file]
target/linux/adm5120/patches-2.6.37/906-adm5120sw-mc_count-fix.patch [deleted file]
target/linux/adm5120/patches-2.6.37/930-2_6_36_ports.patch [deleted file]
target/linux/adm5120/router_be/config-2.6.35 [deleted file]
target/linux/adm5120/router_be/config-2.6.36 [deleted file]
target/linux/adm5120/router_be/config-2.6.37 [deleted file]
target/linux/adm5120/router_le/config-2.6.35 [deleted file]
target/linux/adm5120/router_le/config-2.6.36 [deleted file]
target/linux/adm5120/router_le/config-2.6.37 [deleted file]

diff --git a/target/linux/adm5120/patches-2.6.35/001-adm5120.patch b/target/linux/adm5120/patches-2.6.35/001-adm5120.patch
deleted file mode 100644 (file)
index c99399c..0000000
+++ /dev/null
@@ -1,58 +0,0 @@
---- a/arch/mips/Kconfig
-+++ b/arch/mips/Kconfig
-@@ -23,6 +23,21 @@ choice
-       prompt "System type"
-       default SGI_IP22
-+config ADM5120
-+      bool "Infineon/ADMtek ADM5120 SoC based machines"
-+      select CEVT_R4K
-+      select CSRC_R4K
-+      select SYS_HAS_CPU_MIPS32_R1
-+      select SYS_HAS_EARLY_PRINTK
-+      select DMA_NONCOHERENT
-+      select IRQ_CPU
-+      select SYS_SUPPORTS_LITTLE_ENDIAN
-+      select SYS_SUPPORTS_BIG_ENDIAN
-+      select SYS_SUPPORTS_32BIT_KERNEL
-+      select ARCH_REQUIRE_GPIOLIB
-+      select SWAP_IO_SPACE if CPU_BIG_ENDIAN
-+      select MIPS_MACHINE
-+
- config MACH_ALCHEMY
-       bool "Alchemy processor based machines"
-       select SYS_SUPPORTS_ZBOOT
-@@ -683,6 +698,7 @@ config CAVIUM_OCTEON_REFERENCE_BOARD
- endchoice
-+source "arch/mips/adm5120/Kconfig"
- source "arch/mips/alchemy/Kconfig"
- source "arch/mips/bcm63xx/Kconfig"
- source "arch/mips/jazz/Kconfig"
---- a/arch/mips/Makefile
-+++ b/arch/mips/Makefile
-@@ -227,6 +227,23 @@ cflags-$(CONFIG_MACH_JAZZ)        += -I$(srctre
- load-$(CONFIG_MACH_JAZZ)      += 0xffffffff80080000
- #
-+# Infineon/ADMtek ADM5120
-+#
-+libs-$(CONFIG_ADM5120)                        += arch/mips/adm5120/prom/
-+core-$(CONFIG_ADM5120)                        += arch/mips/adm5120/common/
-+core-$(CONFIG_ADM5120_OEM_CELLVISION) += arch/mips/adm5120/cellvision/
-+core-$(CONFIG_ADM5120_OEM_COMPEX)     += arch/mips/adm5120/compex/
-+core-$(CONFIG_ADM5120_OEM_EDIMAX)     += arch/mips/adm5120/edimax/
-+core-$(CONFIG_ADM5120_OEM_GENERIC)    += arch/mips/adm5120/generic/
-+core-$(CONFIG_ADM5120_OEM_INFINEON)   += arch/mips/adm5120/infineon/
-+core-$(CONFIG_ADM5120_OEM_MIKROTIK)   += arch/mips/adm5120/mikrotik/
-+core-$(CONFIG_ADM5120_OEM_MOTOROLA)   += arch/mips/adm5120/motorola/
-+core-$(CONFIG_ADM5120_OEM_OSBRIDGE)   += arch/mips/adm5120/osbridge/
-+core-$(CONFIG_ADM5120_OEM_ZYXEL)      += arch/mips/adm5120/zyxel/
-+cflags-$(CONFIG_ADM5120)              += -I$(srctree)/arch/mips/include/asm/mach-adm5120
-+load-$(CONFIG_ADM5120)                        += 0xffffffff80001000
-+
-+#
- # Common Alchemy Au1x00 stuff
- #
- core-$(CONFIG_SOC_AU1X00)     += arch/mips/alchemy/common/
diff --git a/target/linux/adm5120/patches-2.6.35/002-adm5120_flash.patch b/target/linux/adm5120/patches-2.6.35/002-adm5120_flash.patch
deleted file mode 100644 (file)
index 6139c4e..0000000
+++ /dev/null
@@ -1,21 +0,0 @@
---- a/drivers/mtd/maps/Kconfig
-+++ b/drivers/mtd/maps/Kconfig
-@@ -551,4 +551,8 @@ config MTD_PISMO
-         When built as a module, it will be called pismo.ko
-+config MTD_ADM5120
-+      tristate "Map driver for ADM5120 based boards"
-+      depends on ADM5120
-+
- endmenu
---- a/drivers/mtd/maps/Makefile
-+++ b/drivers/mtd/maps/Makefile
-@@ -40,6 +40,7 @@ obj-$(CONFIG_MTD_SCx200_DOCFLASH)+= scx2
- obj-$(CONFIG_MTD_DBOX2)               += dbox2-flash.o
- obj-$(CONFIG_MTD_SOLUTIONENGINE)+= solutionengine.o
- obj-$(CONFIG_MTD_PCI)         += pci.o
-+obj-$(CONFIG_MTD_ADM5120)     += adm5120-flash.o
- obj-$(CONFIG_MTD_AUTCPU12)    += autcpu12-nvram.o
- obj-$(CONFIG_MTD_EDB7312)     += edb7312.o
- obj-$(CONFIG_MTD_IMPA7)               += impa7.o
diff --git a/target/linux/adm5120/patches-2.6.35/003-adm5120_switch.patch b/target/linux/adm5120/patches-2.6.35/003-adm5120_switch.patch
deleted file mode 100644 (file)
index fb5fb83..0000000
+++ /dev/null
@@ -1,23 +0,0 @@
---- a/drivers/net/Kconfig
-+++ b/drivers/net/Kconfig
-@@ -614,6 +614,10 @@ config MIPS_AU1X00_ENET
-         If you have an Alchemy Semi AU1X00 based system
-         say Y.  Otherwise, say N.
-+config ADM5120_ENET
-+      tristate "ADM5120 Ethernet switch support"
-+      depends on ADM5120
-+
- config SGI_IOC3_ETH
-       bool "SGI IOC3 Ethernet"
-       depends on PCI && SGI_IP27
---- a/drivers/net/Makefile
-+++ b/drivers/net/Makefile
-@@ -213,6 +213,7 @@ obj-$(CONFIG_SC92031) += sc92031.o
- # This is also a 82596 and should probably be merged
- obj-$(CONFIG_LP486E) += lp486e.o
-+obj-$(CONFIG_ADM5120_ENET) += adm5120sw.o
- obj-$(CONFIG_ETH16I) += eth16i.o
- obj-$(CONFIG_ZORRO8390) += zorro8390.o 8390.o
- obj-$(CONFIG_HPLANCE) += hplance.o 7990.o
diff --git a/target/linux/adm5120/patches-2.6.35/005-adm5120_usb.patch b/target/linux/adm5120/patches-2.6.35/005-adm5120_usb.patch
deleted file mode 100644 (file)
index 8b5a553..0000000
+++ /dev/null
@@ -1,33 +0,0 @@
---- a/drivers/usb/Makefile
-+++ b/drivers/usb/Makefile
-@@ -9,6 +9,7 @@ obj-$(CONFIG_USB)              += core/
- obj-$(CONFIG_USB_MON)         += mon/
- obj-$(CONFIG_PCI)             += host/
-+obj-$(CONFIG_USB_ADM5120_HCD) += host/
- obj-$(CONFIG_USB_EHCI_HCD)    += host/
- obj-$(CONFIG_USB_ISP116X_HCD) += host/
- obj-$(CONFIG_USB_OHCI_HCD)    += host/
---- a/drivers/usb/host/Kconfig
-+++ b/drivers/usb/host/Kconfig
-@@ -4,6 +4,10 @@
- comment "USB Host Controller Drivers"
-       depends on USB
-+config USB_ADM5120_HCD
-+      tristate "ADM5120 HCD support (EXPERIMENTAL)"
-+      depends on USB && ADM5120 && EXPERIMENTAL
-+
- config USB_C67X00_HCD
-       tristate "Cypress C67x00 HCD support"
-       depends on USB
---- a/drivers/usb/host/Makefile
-+++ b/drivers/usb/host/Makefile
-@@ -18,6 +18,7 @@ obj-$(CONFIG_USB_WHCI_HCD)   += whci/
- obj-$(CONFIG_PCI)             += pci-quirks.o
-+obj-$(CONFIG_USB_ADM5120_HCD) += adm5120-hcd.o
- obj-$(CONFIG_USB_EHCI_HCD)    += ehci-hcd.o
- obj-$(CONFIG_USB_OXU210HP_HCD)        += oxu210hp-hcd.o
- obj-$(CONFIG_USB_ISP116X_HCD) += isp116x-hcd.o
diff --git a/target/linux/adm5120/patches-2.6.35/007-adm5120_pci.patch b/target/linux/adm5120/patches-2.6.35/007-adm5120_pci.patch
deleted file mode 100644 (file)
index fa8dd44..0000000
+++ /dev/null
@@ -1,22 +0,0 @@
---- a/arch/mips/pci/Makefile
-+++ b/arch/mips/pci/Makefile
-@@ -55,6 +55,7 @@ obj-$(CONFIG_ZAO_CAPCELLA)   += fixup-capc
- obj-$(CONFIG_WR_PPMC)         += fixup-wrppmc.o
- obj-$(CONFIG_MIKROTIK_RB532)  += pci-rc32434.o ops-rc32434.o fixup-rc32434.o
- obj-$(CONFIG_CPU_CAVIUM_OCTEON)       += pci-octeon.o pcie-octeon.o
-+obj-$(CONFIG_ADM5120)         += pci-adm5120.o
- ifdef CONFIG_PCI_MSI
- obj-$(CONFIG_CPU_CAVIUM_OCTEON)       += msi-octeon.o
---- a/include/linux/pci_ids.h
-+++ b/include/linux/pci_ids.h
-@@ -1756,6 +1756,9 @@
- #define PCI_VENDOR_ID_ESDGMBH         0x12fe
- #define PCI_DEVICE_ID_ESDGMBH_CPCIASIO4 0x0111
-+#define PCI_VENDOR_ID_ADMTEK          0x1317
-+#define PCI_DEVICE_ID_ADMTEK_ADM5120  0x5120
-+
- #define PCI_VENDOR_ID_SIIG            0x131f
- #define PCI_SUBVENDOR_ID_SIIG         0x131f
- #define PCI_DEVICE_ID_SIIG_1S_10x_550 0x1000
diff --git a/target/linux/adm5120/patches-2.6.35/009-adm5120_leds_switch_trigger.patch b/target/linux/adm5120/patches-2.6.35/009-adm5120_leds_switch_trigger.patch
deleted file mode 100644 (file)
index fb65ef3..0000000
+++ /dev/null
@@ -1,22 +0,0 @@
---- a/drivers/leds/Kconfig
-+++ b/drivers/leds/Kconfig
-@@ -389,4 +389,12 @@ config LEDS_TRIGGER_USBDEV
-         This allows LEDs to be controlled by the presence/activity of
-         an USB device. If unsure, say N.
-+config LEDS_TRIGGER_ADM5120_SWITCH
-+      tristate "LED ADM5120 Switch Port Status Trigger"
-+      depends on LEDS_TRIGGERS && ADM5120
-+      help
-+        This allows LEDs to be controlled by the port states of
-+        the ADM5120 built-in Ethernet Switch
-+        If unsure, say N.
-+
- endif # NEW_LEDS
---- a/drivers/leds/Makefile
-+++ b/drivers/leds/Makefile
-@@ -51,3 +51,4 @@ obj-$(CONFIG_LEDS_TRIGGER_DEFAULT_ON)        +=
- obj-$(CONFIG_LEDS_TRIGGER_MORSE)      += ledtrig-morse.o
- obj-$(CONFIG_LEDS_TRIGGER_NETDEV)     += ledtrig-netdev.o
- obj-$(CONFIG_LEDS_TRIGGER_USBDEV)     += ledtrig-usbdev.o
-+obj-$(CONFIG_LEDS_TRIGGER_ADM5120_SWITCH) += ledtrig-adm5120-switch.o
diff --git a/target/linux/adm5120/patches-2.6.35/101-cfi_fixup_macronix_bootloc.patch b/target/linux/adm5120/patches-2.6.35/101-cfi_fixup_macronix_bootloc.patch
deleted file mode 100644 (file)
index 31217c4..0000000
+++ /dev/null
@@ -1,84 +0,0 @@
---- a/drivers/mtd/chips/cfi_cmdset_0002.c
-+++ b/drivers/mtd/chips/cfi_cmdset_0002.c
-@@ -49,6 +49,12 @@
- #define SST49LF008A           0x005a
- #define AT49BV6416            0x00d6
-+/* Macronix */
-+#define MX29LV160B    0x2249  /* MX29LV160 Bottom-boot chip */
-+#define MX29LV160T    0x22C4  /* MX29LV160 Top-boot chip */
-+#define MX29LV320B    0x22A8  /* MX29LV320 Bottom-boot chip */
-+#define MX29LV320T    0x22A7  /* MX29LV320 Top-boot chip */
-+
- static int cfi_amdstd_read (struct mtd_info *, loff_t, size_t, size_t *, u_char *);
- static int cfi_amdstd_write_words(struct mtd_info *, loff_t, size_t, size_t *, const u_char *);
- static int cfi_amdstd_write_buffers(struct mtd_info *, loff_t, size_t, size_t *, const u_char *);
-@@ -329,6 +335,41 @@ static struct cfi_fixup cfi_nopri_fixup_
-       { 0, 0, NULL, NULL }
- };
-+#ifdef CONFIG_MTD_CFI_FIXUP_MACRONIX_BOOTLOC
-+/*
-+ * Some Macronix chips has no/bad bootblock information in the CFI table
-+ */
-+static void fixup_macronix_bootloc(struct mtd_info *mtd, void* param)
-+{
-+      struct map_info *map = mtd->priv;
-+      struct cfi_private *cfi = map->fldrv_priv;
-+      struct cfi_pri_amdstd *extp = cfi->cmdset_priv;
-+      __u8 t;
-+
-+      switch (cfi->id) {
-+      /* TODO: put affected chip ids here */
-+      case MX29LV160B:
-+      case MX29LV320B:
-+              t = 2;  /* Bottom boot */
-+              break;
-+      case MX29LV160T:
-+      case MX29LV320T:
-+              t = 3;  /* Top boot */
-+              break;
-+      default:
-+              return;
-+      }
-+
-+      if (extp->TopBottom == t)
-+              /* boot location detected by the CFI layer is correct */
-+              return;
-+
-+      extp->TopBottom = t;
-+      printk("%s: Macronix chip detected, id:0x%04X, boot location forced "
-+              "to %s\n", map->name, cfi->id, (t == 2) ? "bottom" : "top");
-+}
-+#endif /* CONFIG_MTD_CFI_FIXUP_MACRONIX_BOOTLOC */
-+
- static struct cfi_fixup cfi_fixup_table[] = {
-       { CFI_MFR_ATMEL, CFI_ID_ANY, fixup_convert_atmel_pri, NULL },
- #ifdef AMD_BOOTLOC_BUG
-@@ -365,6 +406,9 @@ static struct cfi_fixup fixup_table[] =
-        */
-       { CFI_MFR_ANY, CFI_ID_ANY, fixup_use_erase_chip, NULL },
-       { CFI_MFR_ATMEL, AT49BV6416, fixup_use_atmel_lock, NULL },
-+#ifdef CONFIG_MTD_CFI_FIXUP_MACRONIX_BOOTLOC
-+      { CFI_MFR_MACRONIX, CFI_ID_ANY, fixup_macronix_bootloc, NULL, },
-+#endif
-       { 0, 0, NULL, NULL }
- };
---- a/drivers/mtd/chips/Kconfig
-+++ b/drivers/mtd/chips/Kconfig
-@@ -196,6 +196,14 @@ config MTD_CFI_AMDSTD
-         provides support for one of those command sets, used on chips
-         including the AMD Am29LV320.
-+config MTD_CFI_FIXUP_MACRONIX_BOOTLOC
-+      bool "Fix boot-block location for Macronix flash chips"
-+      depends on MTD_CFI_AMDSTD
-+      help
-+        Some Macronix flash chips have no/wrong boot-block location in the
-+        CFI table, and the driver may detect the type incorrectly. Select
-+        this if your board has such chip.
-+
- config MTD_CFI_STAA
-       tristate "Support for ST (Advanced Architecture) flash chips"
-       depends on MTD_GEN_PROBE
diff --git a/target/linux/adm5120/patches-2.6.35/102-jedec_pmc_39lvxxx_chips.patch b/target/linux/adm5120/patches-2.6.35/102-jedec_pmc_39lvxxx_chips.patch
deleted file mode 100644 (file)
index 626cd85..0000000
+++ /dev/null
@@ -1,68 +0,0 @@
---- a/drivers/mtd/chips/jedec_probe.c
-+++ b/drivers/mtd/chips/jedec_probe.c
-@@ -116,6 +116,10 @@
- #define UPD29F064115  0x221C
- /* PMC */
-+#define PM39LV512     0x001B
-+#define PM39LV010     0x001C
-+#define PM39LV020     0x003D
-+#define PM39LV040     0x003E
- #define PM49FL002     0x006D
- #define PM49FL004     0x006E
- #define PM49FL008     0x006A
-@@ -1273,6 +1277,54 @@ static const struct amd_flash_info jedec
-                       ERASEINFO(0x02000,2),
-                       ERASEINFO(0x04000,1),
-               }
-+        }, {
-+              .mfr_id         = CFI_MFR_PMC,
-+              .dev_id         = PM39LV512,
-+              .name           = "PMC Pm39LV512",
-+              .devtypes       = CFI_DEVICETYPE_X8,
-+              .uaddr          = MTD_UADDR_0x0555_0x02AA,
-+              .dev_size       = SIZE_64KiB,
-+              .cmd_set        = P_ID_AMD_STD,
-+              .nr_regions     = 1,
-+              .regions        = {
-+                      ERASEINFO(0x01000,16),
-+              }
-+        }, {
-+              .mfr_id         = CFI_MFR_PMC,
-+              .dev_id         = PM39LV010,
-+              .name           = "PMC Pm39LV010",
-+              .devtypes       = CFI_DEVICETYPE_X8,
-+              .uaddr          = MTD_UADDR_0x0555_0x02AA,
-+              .dev_size       = SIZE_128KiB,
-+              .cmd_set        = P_ID_AMD_STD,
-+              .nr_regions     = 1,
-+              .regions        = {
-+                      ERASEINFO(0x01000,32),
-+              }
-+        }, {
-+              .mfr_id         = CFI_MFR_PMC,
-+              .dev_id         = PM39LV020,
-+              .name           = "PMC Pm39LV020",
-+              .devtypes       = CFI_DEVICETYPE_X8,
-+              .uaddr          = MTD_UADDR_0x0555_0x02AA,
-+              .dev_size       = SIZE_256KiB,
-+              .cmd_set        = P_ID_AMD_STD,
-+              .nr_regions     = 1,
-+              .regions        = {
-+                      ERASEINFO(0x01000,64),
-+              }
-+        }, {
-+              .mfr_id         = CFI_MFR_PMC,
-+              .dev_id         = PM39LV040,
-+              .name           = "PMC Pm39LV040",
-+              .devtypes       = CFI_DEVICETYPE_X8,
-+              .uaddr          = MTD_UADDR_0x0555_0x02AA,
-+              .dev_size       = SIZE_512KiB,
-+              .cmd_set        = P_ID_AMD_STD,
-+              .nr_regions     = 1,
-+              .regions        = {
-+                      ERASEINFO(0x01000,128),
-+              }
-       }, {
-               .mfr_id         = CFI_MFR_PMC,
-               .dev_id         = PM49FL002,
diff --git a/target/linux/adm5120/patches-2.6.35/103-mtd_trxsplit.patch b/target/linux/adm5120/patches-2.6.35/103-mtd_trxsplit.patch
deleted file mode 100644 (file)
index ec4f6c5..0000000
+++ /dev/null
@@ -1,24 +0,0 @@
---- a/drivers/mtd/Kconfig
-+++ b/drivers/mtd/Kconfig
-@@ -63,6 +63,11 @@ config MTD_ROOTFS_SPLIT
-       depends on MTD_PARTITIONS
-       default y
-+config MTD_TRXSPLIT
-+      bool "Automatically find and split TRX partitions"
-+      depends on MTD_PARTITIONS
-+      default n
-+
- config MTD_REDBOOT_PARTS
-       tristate "RedBoot partition table parsing"
-       depends on MTD_PARTITIONS
---- a/drivers/mtd/Makefile
-+++ b/drivers/mtd/Makefile
-@@ -8,6 +8,7 @@ mtd-y                          := mtdcore.o mtdsuper.o
- mtd-$(CONFIG_MTD_PARTITIONS)  += mtdpart.o
- obj-$(CONFIG_MTD_CONCAT)      += mtdconcat.o
-+obj-$(CONFIG_MTD_TRXSPLIT)    += trxsplit.o
- obj-$(CONFIG_MTD_REDBOOT_PARTS) += redboot.o
- obj-$(CONFIG_MTD_CMDLINE_PARTS) += cmdlinepart.o
- obj-$(CONFIG_MTD_AFS_PARTS)   += afs.o
diff --git a/target/linux/adm5120/patches-2.6.35/120-rb153_cf_driver.patch b/target/linux/adm5120/patches-2.6.35/120-rb153_cf_driver.patch
deleted file mode 100644 (file)
index 9b486a7..0000000
+++ /dev/null
@@ -1,28 +0,0 @@
---- a/drivers/ata/Makefile
-+++ b/drivers/ata/Makefile
-@@ -88,6 +88,7 @@ obj-$(CONFIG_PATA_QDI)               += pata_qdi.o
- obj-$(CONFIG_PATA_RB532)      += pata_rb532_cf.o
- obj-$(CONFIG_PATA_RZ1000)     += pata_rz1000.o
- obj-$(CONFIG_PATA_WINBOND_VLB)        += pata_winbond.o
-+obj-$(CONFIG_PATA_RB153_CF)   += pata_rb153_cf.o
- # Should be last but two libata driver
- obj-$(CONFIG_PATA_ACPI)               += pata_acpi.o
---- a/drivers/ata/Kconfig
-+++ b/drivers/ata/Kconfig
-@@ -778,6 +778,15 @@ config PATA_QDI
-       help
-         Support for QDI 6500 and 6580 PATA controllers on VESA local bus.
-+config PATA_RB153_CF
-+      tristate "RouterBOARD 153 Compact Flash support"
-+      depends on ADM5120_MACH_RB_153
-+      help
-+        This option enables support for a Compact Flash connected on
-+        the RouterBOARD 153.
-+
-+        If unsure, say N.
-+
- config PATA_RB532
-       tristate "RouterBoard 532 PATA CompactFlash support"
-       depends on MIKROTIK_RB532
diff --git a/target/linux/adm5120/patches-2.6.35/200-amba_pl010_hacks.patch b/target/linux/adm5120/patches-2.6.35/200-amba_pl010_hacks.patch
deleted file mode 100644 (file)
index e458ab7..0000000
+++ /dev/null
@@ -1,378 +0,0 @@
---- a/drivers/serial/amba-pl010.c
-+++ b/drivers/serial/amba-pl010.c
-@@ -51,11 +51,10 @@
- #include <asm/io.h>
--#define UART_NR               8
--
- #define SERIAL_AMBA_MAJOR     204
- #define SERIAL_AMBA_MINOR     16
--#define SERIAL_AMBA_NR                UART_NR
-+#define SERIAL_AMBA_NR                CONFIG_SERIAL_AMBA_PL010_NUMPORTS
-+#define SERIAL_AMBA_NAME      CONFIG_SERIAL_AMBA_PL010_PORTNAME
- #define AMBA_ISR_PASS_LIMIT   256
-@@ -81,9 +80,9 @@ static void pl010_stop_tx(struct uart_po
-       struct uart_amba_port *uap = (struct uart_amba_port *)port;
-       unsigned int cr;
--      cr = readb(uap->port.membase + UART010_CR);
-+      cr = __raw_readl(uap->port.membase + UART010_CR);
-       cr &= ~UART010_CR_TIE;
--      writel(cr, uap->port.membase + UART010_CR);
-+      __raw_writel(cr, uap->port.membase + UART010_CR);
- }
- static void pl010_start_tx(struct uart_port *port)
-@@ -91,9 +90,9 @@ static void pl010_start_tx(struct uart_p
-       struct uart_amba_port *uap = (struct uart_amba_port *)port;
-       unsigned int cr;
--      cr = readb(uap->port.membase + UART010_CR);
-+      cr = __raw_readl(uap->port.membase + UART010_CR);
-       cr |= UART010_CR_TIE;
--      writel(cr, uap->port.membase + UART010_CR);
-+      __raw_writel(cr, uap->port.membase + UART010_CR);
- }
- static void pl010_stop_rx(struct uart_port *port)
-@@ -101,9 +100,9 @@ static void pl010_stop_rx(struct uart_po
-       struct uart_amba_port *uap = (struct uart_amba_port *)port;
-       unsigned int cr;
--      cr = readb(uap->port.membase + UART010_CR);
-+      cr = __raw_readl(uap->port.membase + UART010_CR);
-       cr &= ~(UART010_CR_RIE | UART010_CR_RTIE);
--      writel(cr, uap->port.membase + UART010_CR);
-+      __raw_writel(cr, uap->port.membase + UART010_CR);
- }
- static void pl010_enable_ms(struct uart_port *port)
-@@ -111,9 +110,9 @@ static void pl010_enable_ms(struct uart_
-       struct uart_amba_port *uap = (struct uart_amba_port *)port;
-       unsigned int cr;
--      cr = readb(uap->port.membase + UART010_CR);
-+      cr = __raw_readl(uap->port.membase + UART010_CR);
-       cr |= UART010_CR_MSIE;
--      writel(cr, uap->port.membase + UART010_CR);
-+      __raw_writel(cr, uap->port.membase + UART010_CR);
- }
- static void pl010_rx_chars(struct uart_amba_port *uap)
-@@ -121,9 +120,9 @@ static void pl010_rx_chars(struct uart_a
-       struct tty_struct *tty = uap->port.state->port.tty;
-       unsigned int status, ch, flag, rsr, max_count = 256;
--      status = readb(uap->port.membase + UART01x_FR);
-+      status = __raw_readl(uap->port.membase + UART01x_FR);
-       while (UART_RX_DATA(status) && max_count--) {
--              ch = readb(uap->port.membase + UART01x_DR);
-+              ch = __raw_readl(uap->port.membase + UART01x_DR);
-               flag = TTY_NORMAL;
-               uap->port.icount.rx++;
-@@ -132,9 +131,9 @@ static void pl010_rx_chars(struct uart_a
-                * Note that the error handling code is
-                * out of the main execution path
-                */
--              rsr = readb(uap->port.membase + UART01x_RSR) | UART_DUMMY_RSR_RX;
-+              rsr = __raw_readl(uap->port.membase + UART01x_RSR) | UART_DUMMY_RSR_RX;
-               if (unlikely(rsr & UART01x_RSR_ANY)) {
--                      writel(0, uap->port.membase + UART01x_ECR);
-+                      __raw_writel(0, uap->port.membase + UART01x_ECR);
-                       if (rsr & UART01x_RSR_BE) {
-                               rsr &= ~(UART01x_RSR_FE | UART01x_RSR_PE);
-@@ -164,7 +163,7 @@ static void pl010_rx_chars(struct uart_a
-               uart_insert_char(&uap->port, rsr, UART01x_RSR_OE, ch, flag);
-       ignore_char:
--              status = readb(uap->port.membase + UART01x_FR);
-+              status = __raw_readl(uap->port.membase + UART01x_FR);
-       }
-       spin_unlock(&uap->port.lock);
-       tty_flip_buffer_push(tty);
-@@ -177,7 +176,7 @@ static void pl010_tx_chars(struct uart_a
-       int count;
-       if (uap->port.x_char) {
--              writel(uap->port.x_char, uap->port.membase + UART01x_DR);
-+              __raw_writel(uap->port.x_char, uap->port.membase + UART01x_DR);
-               uap->port.icount.tx++;
-               uap->port.x_char = 0;
-               return;
-@@ -189,7 +188,7 @@ static void pl010_tx_chars(struct uart_a
-       count = uap->port.fifosize >> 1;
-       do {
--              writel(xmit->buf[xmit->tail], uap->port.membase + UART01x_DR);
-+              __raw_writel(xmit->buf[xmit->tail], uap->port.membase + UART01x_DR);
-               xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
-               uap->port.icount.tx++;
-               if (uart_circ_empty(xmit))
-@@ -207,9 +206,9 @@ static void pl010_modem_status(struct ua
- {
-       unsigned int status, delta;
--      writel(0, uap->port.membase + UART010_ICR);
-+      __raw_writel(0, uap->port.membase + UART010_ICR);
--      status = readb(uap->port.membase + UART01x_FR) & UART01x_FR_MODEM_ANY;
-+      status = __raw_readl(uap->port.membase + UART01x_FR) & UART01x_FR_MODEM_ANY;
-       delta = status ^ uap->old_status;
-       uap->old_status = status;
-@@ -237,7 +236,7 @@ static irqreturn_t pl010_int(int irq, vo
-       spin_lock(&uap->port.lock);
--      status = readb(uap->port.membase + UART010_IIR);
-+      status = __raw_readl(uap->port.membase + UART010_IIR);
-       if (status) {
-               do {
-                       if (status & (UART010_IIR_RTIS | UART010_IIR_RIS))
-@@ -250,7 +249,7 @@ static irqreturn_t pl010_int(int irq, vo
-                       if (pass_counter-- == 0)
-                               break;
--                      status = readb(uap->port.membase + UART010_IIR);
-+                      status = __raw_readl(uap->port.membase + UART010_IIR);
-               } while (status & (UART010_IIR_RTIS | UART010_IIR_RIS |
-                                  UART010_IIR_TIS));
-               handled = 1;
-@@ -264,7 +263,7 @@ static irqreturn_t pl010_int(int irq, vo
- static unsigned int pl010_tx_empty(struct uart_port *port)
- {
-       struct uart_amba_port *uap = (struct uart_amba_port *)port;
--      unsigned int status = readb(uap->port.membase + UART01x_FR);
-+      unsigned int status = __raw_readl(uap->port.membase + UART01x_FR);
-       return status & UART01x_FR_BUSY ? 0 : TIOCSER_TEMT;
- }
-@@ -274,7 +273,7 @@ static unsigned int pl010_get_mctrl(stru
-       unsigned int result = 0;
-       unsigned int status;
--      status = readb(uap->port.membase + UART01x_FR);
-+      status = __raw_readl(uap->port.membase + UART01x_FR);
-       if (status & UART01x_FR_DCD)
-               result |= TIOCM_CAR;
-       if (status & UART01x_FR_DSR)
-@@ -300,12 +299,12 @@ static void pl010_break_ctl(struct uart_
-       unsigned int lcr_h;
-       spin_lock_irqsave(&uap->port.lock, flags);
--      lcr_h = readb(uap->port.membase + UART010_LCRH);
-+      lcr_h = __raw_readl(uap->port.membase + UART010_LCRH);
-       if (break_state == -1)
-               lcr_h |= UART01x_LCRH_BRK;
-       else
-               lcr_h &= ~UART01x_LCRH_BRK;
--      writel(lcr_h, uap->port.membase + UART010_LCRH);
-+      __raw_writel(lcr_h, uap->port.membase + UART010_LCRH);
-       spin_unlock_irqrestore(&uap->port.lock, flags);
- }
-@@ -333,12 +332,12 @@ static int pl010_startup(struct uart_por
-       /*
-        * initialise the old status of the modem signals
-        */
--      uap->old_status = readb(uap->port.membase + UART01x_FR) & UART01x_FR_MODEM_ANY;
-+      uap->old_status = __raw_readl(uap->port.membase + UART01x_FR) & UART01x_FR_MODEM_ANY;
-       /*
-        * Finally, enable interrupts
-        */
--      writel(UART01x_CR_UARTEN | UART010_CR_RIE | UART010_CR_RTIE,
-+      __raw_writel(UART01x_CR_UARTEN | UART010_CR_RIE | UART010_CR_RTIE,
-              uap->port.membase + UART010_CR);
-       return 0;
-@@ -361,10 +360,10 @@ static void pl010_shutdown(struct uart_p
-       /*
-        * disable all interrupts, disable the port
-        */
--      writel(0, uap->port.membase + UART010_CR);
-+      __raw_writel(0, uap->port.membase + UART010_CR);
-       /* disable break condition and fifos */
--      writel(readb(uap->port.membase + UART010_LCRH) &
-+      __raw_writel(__raw_readl(uap->port.membase + UART010_LCRH) &
-               ~(UART01x_LCRH_BRK | UART01x_LCRH_FEN),
-              uap->port.membase + UART010_LCRH);
-@@ -386,7 +385,7 @@ pl010_set_termios(struct uart_port *port
-       /*
-        * Ask the core to calculate the divisor for us.
-        */
--      baud = uart_get_baud_rate(port, termios, old, 0, uap->port.uartclk/16); 
-+      baud = uart_get_baud_rate(port, termios, old, 0, uap->port.uartclk/16);
-       quot = uart_get_divisor(port, baud);
-       switch (termios->c_cflag & CSIZE) {
-@@ -449,25 +448,25 @@ pl010_set_termios(struct uart_port *port
-               uap->port.ignore_status_mask |= UART_DUMMY_RSR_RX;
-       /* first, disable everything */
--      old_cr = readb(uap->port.membase + UART010_CR) & ~UART010_CR_MSIE;
-+      old_cr = __raw_readl(uap->port.membase + UART010_CR) & ~UART010_CR_MSIE;
-       if (UART_ENABLE_MS(port, termios->c_cflag))
-               old_cr |= UART010_CR_MSIE;
--      writel(0, uap->port.membase + UART010_CR);
-+      __raw_writel(0, uap->port.membase + UART010_CR);
-       /* Set baud rate */
-       quot -= 1;
--      writel((quot & 0xf00) >> 8, uap->port.membase + UART010_LCRM);
--      writel(quot & 0xff, uap->port.membase + UART010_LCRL);
-+      __raw_writel((quot & 0xf00) >> 8, uap->port.membase + UART010_LCRM);
-+      __raw_writel(quot & 0xff, uap->port.membase + UART010_LCRL);
-       /*
-        * ----------v----------v----------v----------v-----
-        * NOTE: MUST BE WRITTEN AFTER UARTLCR_M & UARTLCR_L
-        * ----------^----------^----------^----------^-----
-        */
--      writel(lcr_h, uap->port.membase + UART010_LCRH);
--      writel(old_cr, uap->port.membase + UART010_CR);
-+      __raw_writel(lcr_h, uap->port.membase + UART010_LCRH);
-+      __raw_writel(old_cr, uap->port.membase + UART010_CR);
-       spin_unlock_irqrestore(&uap->port.lock, flags);
- }
-@@ -554,7 +553,7 @@ static struct uart_ops amba_pl010_pops =
-       .verify_port    = pl010_verify_port,
- };
--static struct uart_amba_port *amba_ports[UART_NR];
-+static struct uart_amba_port *amba_ports[SERIAL_AMBA_NR];
- #ifdef CONFIG_SERIAL_AMBA_PL010_CONSOLE
-@@ -564,10 +563,10 @@ static void pl010_console_putchar(struct
-       unsigned int status;
-       do {
--              status = readb(uap->port.membase + UART01x_FR);
-+              status = __raw_readl(uap->port.membase + UART01x_FR);
-               barrier();
-       } while (!UART_TX_READY(status));
--      writel(ch, uap->port.membase + UART01x_DR);
-+      __raw_writel(ch, uap->port.membase + UART01x_DR);
- }
- static void
-@@ -581,8 +580,8 @@ pl010_console_write(struct console *co,
-       /*
-        *      First save the CR then disable the interrupts
-        */
--      old_cr = readb(uap->port.membase + UART010_CR);
--      writel(UART01x_CR_UARTEN, uap->port.membase + UART010_CR);
-+      old_cr = __raw_readl(uap->port.membase + UART010_CR);
-+      __raw_writel(UART01x_CR_UARTEN, uap->port.membase + UART010_CR);
-       uart_console_write(&uap->port, s, count, pl010_console_putchar);
-@@ -591,10 +590,10 @@ pl010_console_write(struct console *co,
-        *      and restore the TCR
-        */
-       do {
--              status = readb(uap->port.membase + UART01x_FR);
-+              status = __raw_readl(uap->port.membase + UART01x_FR);
-               barrier();
-       } while (status & UART01x_FR_BUSY);
--      writel(old_cr, uap->port.membase + UART010_CR);
-+      __raw_writel(old_cr, uap->port.membase + UART010_CR);
-       clk_disable(uap->clk);
- }
-@@ -603,9 +602,9 @@ static void __init
- pl010_console_get_options(struct uart_amba_port *uap, int *baud,
-                            int *parity, int *bits)
- {
--      if (readb(uap->port.membase + UART010_CR) & UART01x_CR_UARTEN) {
-+      if (__raw_readl(uap->port.membase + UART010_CR) & UART01x_CR_UARTEN) {
-               unsigned int lcr_h, quot;
--              lcr_h = readb(uap->port.membase + UART010_LCRH);
-+              lcr_h = __raw_readl(uap->port.membase + UART010_LCRH);
-               *parity = 'n';
-               if (lcr_h & UART01x_LCRH_PEN) {
-@@ -620,8 +619,8 @@ pl010_console_get_options(struct uart_am
-               else
-                       *bits = 8;
--              quot = readb(uap->port.membase + UART010_LCRL) |
--                     readb(uap->port.membase + UART010_LCRM) << 8;
-+              quot = __raw_readl(uap->port.membase + UART010_LCRL) |
-+                     __raw_readl(uap->port.membase + UART010_LCRM) << 8;
-               *baud = uap->port.uartclk / (16 * (quot + 1));
-       }
- }
-@@ -639,7 +638,7 @@ static int __init pl010_console_setup(st
-        * if so, search for the first available port that does have
-        * console support.
-        */
--      if (co->index >= UART_NR)
-+      if (co->index >= SERIAL_AMBA_NR)
-               co->index = 0;
-       uap = amba_ports[co->index];
-       if (!uap)
-@@ -657,7 +656,7 @@ static int __init pl010_console_setup(st
- static struct uart_driver amba_reg;
- static struct console amba_console = {
--      .name           = "ttyAM",
-+      .name           = SERIAL_AMBA_NAME,
-       .write          = pl010_console_write,
-       .device         = uart_console_device,
-       .setup          = pl010_console_setup,
-@@ -673,11 +672,11 @@ static struct console amba_console = {
- static struct uart_driver amba_reg = {
-       .owner                  = THIS_MODULE,
--      .driver_name            = "ttyAM",
--      .dev_name               = "ttyAM",
-+      .driver_name            = SERIAL_AMBA_NAME,
-+      .dev_name               = SERIAL_AMBA_NAME,
-       .major                  = SERIAL_AMBA_MAJOR,
-       .minor                  = SERIAL_AMBA_MINOR,
--      .nr                     = UART_NR,
-+      .nr                     = SERIAL_AMBA_NR,
-       .cons                   = AMBA_CONSOLE,
- };
---- a/drivers/serial/Kconfig
-+++ b/drivers/serial/Kconfig
-@@ -284,10 +284,25 @@ config SERIAL_AMBA_PL010
-       help
-         This selects the ARM(R) AMBA(R) PrimeCell PL010 UART.  If you have
-         an Integrator/AP or Integrator/PP2 platform, or if you have a
--        Cirrus Logic EP93xx CPU, say Y or M here.
-+        Cirrus Logic EP93xx CPU or an Infineon ADM5120 SOC, say Y or M here.
-         If unsure, say N.
-+config SERIAL_AMBA_PL010_NUMPORTS
-+      int "Maximum number of AMBA PL010 serial ports"
-+      depends on SERIAL_AMBA_PL010
-+      default "8"
-+      ---help---
-+        Set this to the number of serial ports you want the AMBA PL010 driver
-+        to support.
-+
-+config SERIAL_AMBA_PL010_PORTNAME
-+      string "Name of the AMBA PL010 serial ports"
-+      depends on SERIAL_AMBA_PL010
-+      default "ttyAM"
-+      ---help---
-+        ::: To be written :::
-+
- config SERIAL_AMBA_PL010_CONSOLE
-       bool "Support for console on AMBA serial port"
-       depends on SERIAL_AMBA_PL010=y
diff --git a/target/linux/adm5120/patches-2.6.35/201-amba_bus_hacks.patch b/target/linux/adm5120/patches-2.6.35/201-amba_bus_hacks.patch
deleted file mode 100644 (file)
index 9db3e55..0000000
+++ /dev/null
@@ -1,13 +0,0 @@
---- a/drivers/amba/bus.c
-+++ b/drivers/amba/bus.c
-@@ -18,6 +18,10 @@
- #include <asm/irq.h>
- #include <asm/sizes.h>
-+#ifndef NO_IRQ
-+#define NO_IRQ                (-1)
-+#endif
-+
- #define to_amba_device(d)     container_of(d, struct amba_device, dev)
- #define to_amba_driver(d)     container_of(d, struct amba_driver, drv)
diff --git a/target/linux/adm5120/patches-2.6.35/203-gpio_leds_brightness.patch b/target/linux/adm5120/patches-2.6.35/203-gpio_leds_brightness.patch
deleted file mode 100644 (file)
index ac3c516..0000000
+++ /dev/null
@@ -1,27 +0,0 @@
---- a/drivers/leds/leds-gpio.c
-+++ b/drivers/leds/leds-gpio.c
-@@ -52,13 +52,17 @@ static void gpio_led_set(struct led_clas
-               container_of(led_cdev, struct gpio_led_data, cdev);
-       int level;
--      if (value == LED_OFF)
--              level = 0;
--      else
--              level = 1;
--
--      if (led_dat->active_low)
--              level = !level;
-+      switch (value) {
-+      case LED_OFF:
-+              level = led_dat->active_low ? 1 : 0;
-+              break;
-+      case LED_FULL:
-+              level = led_dat->active_low ? 0 : 1;
-+              break;
-+      default:
-+              level = value;
-+              break;
-+      }
-       /* Setting GPIOs with I2C/etc requires a task context, and we don't
-        * seem to have a reliable way to know if we're already in one; so
diff --git a/target/linux/adm5120/patches-2.6.35/310-adm5120_wdt.patch b/target/linux/adm5120/patches-2.6.35/310-adm5120_wdt.patch
deleted file mode 100644 (file)
index bcc3230..0000000
+++ /dev/null
@@ -1,31 +0,0 @@
---- a/drivers/watchdog/Kconfig
-+++ b/drivers/watchdog/Kconfig
-@@ -825,6 +825,18 @@ config RC32434_WDT
-         To compile this driver as a module, choose M here: the
-         module will be called rc32434_wdt.
-+config ADM5120_WDT
-+      tristate "Infineon ADM5120 SoC hardware watchdog"
-+      depends on WATCHDOG && ADM5120
-+      help
-+        This is a driver for hardware watchdog integrated in Infineon
-+        ADM5120 SoC. This watchdog simply watches your kernel to make sure
-+        it doesn't freeze, and if it does, it reboots your computer after a
-+        certain amount of time.
-+
-+        To compile this driver as a module, choose M here: the module will be
-+        called adm5120_wdt.
-+
- config INDYDOG
-       tristate "Indy/I2 Hardware Watchdog"
-       depends on SGI_HAS_INDYDOG
---- a/drivers/watchdog/Makefile
-+++ b/drivers/watchdog/Makefile
-@@ -114,6 +114,7 @@ obj-$(CONFIG_PNX833X_WDT) += pnx833x_wdt
- obj-$(CONFIG_SIBYTE_WDOG) += sb_wdog.o
- obj-$(CONFIG_AR7_WDT) += ar7_wdt.o
- obj-$(CONFIG_TXX9_WDT) += txx9wdt.o
-+obj-$(CONFIG_ADM5120_WDT) += adm5120_wdt.o
- # PARISC Architecture
diff --git a/target/linux/adm5120/patches-2.6.35/901-adm5120-usb-fix-compiler-warning.patch b/target/linux/adm5120/patches-2.6.35/901-adm5120-usb-fix-compiler-warning.patch
deleted file mode 100644 (file)
index 93149df..0000000
+++ /dev/null
@@ -1,11 +0,0 @@
---- a/drivers/usb/host/adm5120-dbg.c
-+++ b/drivers/usb/host/adm5120-dbg.c
-@@ -133,7 +133,7 @@ urb_print(struct admhcd *ahcd, struct ur
- #define admhc_dbg_sw(ahcd, next, size, format, arg...) \
-       do { \
--      if (next) { \
-+      if (next != NULL) { \
-               unsigned s_len; \
-               s_len = scnprintf(*next, *size, format, ## arg ); \
-               *size -= s_len; *next += s_len; \
diff --git a/target/linux/adm5120/patches-2.6.35/902-adm5120-usb-remove-dev-power-power_state.patch b/target/linux/adm5120/patches-2.6.35/902-adm5120-usb-remove-dev-power-power_state.patch
deleted file mode 100644 (file)
index 4fd0283..0000000
+++ /dev/null
@@ -1,11 +0,0 @@
---- a/drivers/usb/host/adm5120-dbg.c
-+++ b/drivers/usb/host/adm5120-dbg.c
-@@ -642,7 +642,7 @@ static ssize_t fill_registers_buffer(str
-               hcd->product_desc,
-               hcd_name);
--      if (bus->controller->power.power_state.event) {
-+      if (!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags)) {
-               size -= scnprintf(next, size,
-                       "SUSPENDED (no register access)\n");
-               goto done;
diff --git a/target/linux/adm5120/patches-2.6.35/903-adm5120-usb-use-the-admhcd-structure-directly-in-debugfs-files.patch b/target/linux/adm5120/patches-2.6.35/903-adm5120-usb-use-the-admhcd-structure-directly-in-debugfs-files.patch
deleted file mode 100644 (file)
index aa50f8c..0000000
+++ /dev/null
@@ -1,116 +0,0 @@
---- a/drivers/usb/host/adm5120-dbg.c
-+++ b/drivers/usb/host/adm5120-dbg.c
-@@ -419,7 +419,7 @@ static struct dentry *admhc_debug_root;
- struct debug_buffer {
-       ssize_t (*fill_func)(struct debug_buffer *);    /* fill method */
--      struct device *dev;
-+      struct admhcd *ahcd;
-       struct mutex mutex;     /* protect filling of buffer */
-       size_t count;           /* number of characters filled into buffer */
-       char *page;
-@@ -494,15 +494,11 @@ show_list(struct admhcd *ahcd, char *buf
- static ssize_t fill_async_buffer(struct debug_buffer *buf)
- {
--      struct usb_bus          *bus;
--      struct usb_hcd          *hcd;
-       struct admhcd           *ahcd;
-       size_t                  temp;
-       unsigned long           flags;
--      bus = dev_get_drvdata(buf->dev);
--      hcd = bus_to_hcd(bus);
--      ahcd = hcd_to_admhcd(hcd);
-+      ahcd = buf->ahcd;
-       spin_lock_irqsave(&ahcd->lock, flags);
-       temp = show_list(ahcd, buf->page, PAGE_SIZE, ahcd->ed_head);
-@@ -516,8 +512,6 @@ static ssize_t fill_async_buffer(struct
- static ssize_t fill_periodic_buffer(struct debug_buffer *buf)
- {
--      struct usb_bus          *bus;
--      struct usb_hcd          *hcd;
-       struct admhcd           *ahcd;
-       struct ed               **seen, *ed;
-       unsigned long           flags;
-@@ -529,9 +523,7 @@ static ssize_t fill_periodic_buffer(stru
-               return 0;
-       seen_count = 0;
--      bus = dev_get_drvdata(buf->dev);
--      hcd = bus_to_hcd(bus);
--      ahcd = hcd_to_admhcd(hcd);
-+      ahcd = buf->ahcd;
-       next = buf->page;
-       size = PAGE_SIZE;
-@@ -613,7 +605,6 @@ static ssize_t fill_periodic_buffer(stru
- static ssize_t fill_registers_buffer(struct debug_buffer *buf)
- {
--      struct usb_bus          *bus;
-       struct usb_hcd          *hcd;
-       struct admhcd           *ahcd;
-       struct admhcd_regs __iomem *regs;
-@@ -622,9 +613,8 @@ static ssize_t fill_registers_buffer(str
-       char                    *next;
-       u32                     rdata;
--      bus = dev_get_drvdata(buf->dev);
--      hcd = bus_to_hcd(bus);
--      ahcd = hcd_to_admhcd(hcd);
-+      ahcd = buf->ahcd;
-+      hcd = admhcd_to_hcd(ahcd);
-       regs = ahcd->regs;
-       next = buf->page;
-       size = PAGE_SIZE;
-@@ -689,7 +679,7 @@ done:
- }
--static struct debug_buffer *alloc_buffer(struct device *dev,
-+static struct debug_buffer *alloc_buffer(struct admhcd *ahcd,
-                               ssize_t (*fill_func)(struct debug_buffer *))
- {
-       struct debug_buffer *buf;
-@@ -697,7 +687,7 @@ static struct debug_buffer *alloc_buffer
-       buf = kzalloc(sizeof(struct debug_buffer), GFP_KERNEL);
-       if (buf) {
--              buf->dev = dev;
-+              buf->ahcd = ahcd;
-               buf->fill_func = fill_func;
-               mutex_init(&buf->mutex);
-       }
-@@ -790,26 +780,25 @@ static int debug_registers_open(struct i
- static inline void create_debug_files(struct admhcd *ahcd)
- {
-       struct usb_bus *bus = &admhcd_to_hcd(ahcd)->self;
--      struct device *dev = bus->dev;
-       ahcd->debug_dir = debugfs_create_dir(bus->bus_name, admhc_debug_root);
-       if (!ahcd->debug_dir)
-               goto dir_error;
-       ahcd->debug_async = debugfs_create_file("async", S_IRUGO,
--                                              ahcd->debug_dir, dev,
-+                                              ahcd->debug_dir, ahcd,
-                                               &debug_async_fops);
-       if (!ahcd->debug_async)
-               goto async_error;
-       ahcd->debug_periodic = debugfs_create_file("periodic", S_IRUGO,
--                                              ahcd->debug_dir, dev,
-+                                              ahcd->debug_dir, ahcd,
-                                               &debug_periodic_fops);
-       if (!ahcd->debug_periodic)
-               goto periodic_error;
-       ahcd->debug_registers = debugfs_create_file("registers", S_IRUGO,
--                                              ahcd->debug_dir, dev,
-+                                              ahcd->debug_dir, ahcd,
-                                               &debug_registers_fops);
-       if (!ahcd->debug_registers)
-               goto registers_error;
diff --git a/target/linux/adm5120/patches-2.6.35/906-adm5120sw-mc_count-fix.patch b/target/linux/adm5120/patches-2.6.35/906-adm5120sw-mc_count-fix.patch
deleted file mode 100644 (file)
index cb1b376..0000000
+++ /dev/null
@@ -1,11 +0,0 @@
---- a/drivers/net/adm5120sw.c
-+++ b/drivers/net/adm5120sw.c
-@@ -937,7 +937,7 @@ static void adm5120_if_set_multicast_lis
-               t |= (ports << CPUP_CONF_DUNP_SHIFT);
-       if (dev->flags & IFF_PROMISC || dev->flags & IFF_ALLMULTI ||
--                                      dev->mc_count)
-+                                      netdev_mc_count(dev))
-               /* enable multicast packets */
-               t &= ~(ports << CPUP_CONF_DMCP_SHIFT);
-       else
diff --git a/target/linux/adm5120/patches-2.6.36/001-adm5120.patch b/target/linux/adm5120/patches-2.6.36/001-adm5120.patch
deleted file mode 100644 (file)
index b963077..0000000
+++ /dev/null
@@ -1,32 +0,0 @@
---- a/arch/mips/Kconfig
-+++ b/arch/mips/Kconfig
-@@ -26,6 +26,21 @@ choice
-       prompt "System type"
-       default SGI_IP22
-+config ADM5120
-+      bool "Infineon/ADMtek ADM5120 SoC based machines"
-+      select CEVT_R4K
-+      select CSRC_R4K
-+      select SYS_HAS_CPU_MIPS32_R1
-+      select SYS_HAS_EARLY_PRINTK
-+      select DMA_NONCOHERENT
-+      select IRQ_CPU
-+      select SYS_SUPPORTS_LITTLE_ENDIAN
-+      select SYS_SUPPORTS_BIG_ENDIAN
-+      select SYS_SUPPORTS_32BIT_KERNEL
-+      select ARCH_REQUIRE_GPIOLIB
-+      select SWAP_IO_SPACE if CPU_BIG_ENDIAN
-+      select MIPS_MACHINE
-+
- config MIPS_ALCHEMY
-       bool "Alchemy processor based machines"
-       select 64BIT_PHYS_ADDR
-@@ -708,6 +723,7 @@ config CAVIUM_OCTEON_REFERENCE_BOARD
- endchoice
-+source "arch/mips/adm5120/Kconfig"
- source "arch/mips/alchemy/Kconfig"
- source "arch/mips/bcm63xx/Kconfig"
- source "arch/mips/jazz/Kconfig"
diff --git a/target/linux/adm5120/patches-2.6.36/002-adm5120_flash.patch b/target/linux/adm5120/patches-2.6.36/002-adm5120_flash.patch
deleted file mode 100644 (file)
index fb674c7..0000000
+++ /dev/null
@@ -1,21 +0,0 @@
---- a/drivers/mtd/maps/Kconfig
-+++ b/drivers/mtd/maps/Kconfig
-@@ -543,4 +543,8 @@ config MTD_PISMO
-         When built as a module, it will be called pismo.ko
-+config MTD_ADM5120
-+      tristate "Map driver for ADM5120 based boards"
-+      depends on ADM5120
-+
- endmenu
---- a/drivers/mtd/maps/Makefile
-+++ b/drivers/mtd/maps/Makefile
-@@ -40,6 +40,7 @@ obj-$(CONFIG_MTD_SCx200_DOCFLASH)+= scx2
- obj-$(CONFIG_MTD_DBOX2)               += dbox2-flash.o
- obj-$(CONFIG_MTD_SOLUTIONENGINE)+= solutionengine.o
- obj-$(CONFIG_MTD_PCI)         += pci.o
-+obj-$(CONFIG_MTD_ADM5120)     += adm5120-flash.o
- obj-$(CONFIG_MTD_AUTCPU12)    += autcpu12-nvram.o
- obj-$(CONFIG_MTD_EDB7312)     += edb7312.o
- obj-$(CONFIG_MTD_IMPA7)               += impa7.o
diff --git a/target/linux/adm5120/patches-2.6.36/003-adm5120_switch.patch b/target/linux/adm5120/patches-2.6.36/003-adm5120_switch.patch
deleted file mode 100644 (file)
index fb5fb83..0000000
+++ /dev/null
@@ -1,23 +0,0 @@
---- a/drivers/net/Kconfig
-+++ b/drivers/net/Kconfig
-@@ -614,6 +614,10 @@ config MIPS_AU1X00_ENET
-         If you have an Alchemy Semi AU1X00 based system
-         say Y.  Otherwise, say N.
-+config ADM5120_ENET
-+      tristate "ADM5120 Ethernet switch support"
-+      depends on ADM5120
-+
- config SGI_IOC3_ETH
-       bool "SGI IOC3 Ethernet"
-       depends on PCI && SGI_IP27
---- a/drivers/net/Makefile
-+++ b/drivers/net/Makefile
-@@ -213,6 +213,7 @@ obj-$(CONFIG_SC92031) += sc92031.o
- # This is also a 82596 and should probably be merged
- obj-$(CONFIG_LP486E) += lp486e.o
-+obj-$(CONFIG_ADM5120_ENET) += adm5120sw.o
- obj-$(CONFIG_ETH16I) += eth16i.o
- obj-$(CONFIG_ZORRO8390) += zorro8390.o 8390.o
- obj-$(CONFIG_HPLANCE) += hplance.o 7990.o
diff --git a/target/linux/adm5120/patches-2.6.36/005-adm5120_usb.patch b/target/linux/adm5120/patches-2.6.36/005-adm5120_usb.patch
deleted file mode 100644 (file)
index 8b5a553..0000000
+++ /dev/null
@@ -1,33 +0,0 @@
---- a/drivers/usb/Makefile
-+++ b/drivers/usb/Makefile
-@@ -9,6 +9,7 @@ obj-$(CONFIG_USB)              += core/
- obj-$(CONFIG_USB_MON)         += mon/
- obj-$(CONFIG_PCI)             += host/
-+obj-$(CONFIG_USB_ADM5120_HCD) += host/
- obj-$(CONFIG_USB_EHCI_HCD)    += host/
- obj-$(CONFIG_USB_ISP116X_HCD) += host/
- obj-$(CONFIG_USB_OHCI_HCD)    += host/
---- a/drivers/usb/host/Kconfig
-+++ b/drivers/usb/host/Kconfig
-@@ -4,6 +4,10 @@
- comment "USB Host Controller Drivers"
-       depends on USB
-+config USB_ADM5120_HCD
-+      tristate "ADM5120 HCD support (EXPERIMENTAL)"
-+      depends on USB && ADM5120 && EXPERIMENTAL
-+
- config USB_C67X00_HCD
-       tristate "Cypress C67x00 HCD support"
-       depends on USB
---- a/drivers/usb/host/Makefile
-+++ b/drivers/usb/host/Makefile
-@@ -18,6 +18,7 @@ obj-$(CONFIG_USB_WHCI_HCD)   += whci/
- obj-$(CONFIG_PCI)             += pci-quirks.o
-+obj-$(CONFIG_USB_ADM5120_HCD) += adm5120-hcd.o
- obj-$(CONFIG_USB_EHCI_HCD)    += ehci-hcd.o
- obj-$(CONFIG_USB_OXU210HP_HCD)        += oxu210hp-hcd.o
- obj-$(CONFIG_USB_ISP116X_HCD) += isp116x-hcd.o
diff --git a/target/linux/adm5120/patches-2.6.36/007-adm5120_pci.patch b/target/linux/adm5120/patches-2.6.36/007-adm5120_pci.patch
deleted file mode 100644 (file)
index cb2a10c..0000000
+++ /dev/null
@@ -1,22 +0,0 @@
---- a/arch/mips/pci/Makefile
-+++ b/arch/mips/pci/Makefile
-@@ -55,6 +55,7 @@ obj-$(CONFIG_ZAO_CAPCELLA)   += fixup-capc
- obj-$(CONFIG_WR_PPMC)         += fixup-wrppmc.o
- obj-$(CONFIG_MIKROTIK_RB532)  += pci-rc32434.o ops-rc32434.o fixup-rc32434.o
- obj-$(CONFIG_CPU_CAVIUM_OCTEON)       += pci-octeon.o pcie-octeon.o
-+obj-$(CONFIG_ADM5120)         += pci-adm5120.o
- ifdef CONFIG_PCI_MSI
- obj-$(CONFIG_CPU_CAVIUM_OCTEON)       += msi-octeon.o
---- a/include/linux/pci_ids.h
-+++ b/include/linux/pci_ids.h
-@@ -1759,6 +1759,9 @@
- #define PCI_VENDOR_ID_ESDGMBH         0x12fe
- #define PCI_DEVICE_ID_ESDGMBH_CPCIASIO4 0x0111
-+#define PCI_VENDOR_ID_ADMTEK          0x1317
-+#define PCI_DEVICE_ID_ADMTEK_ADM5120  0x5120
-+
- #define PCI_VENDOR_ID_SIIG            0x131f
- #define PCI_SUBVENDOR_ID_SIIG         0x131f
- #define PCI_DEVICE_ID_SIIG_1S_10x_550 0x1000
diff --git a/target/linux/adm5120/patches-2.6.36/009-adm5120_leds_switch_trigger.patch b/target/linux/adm5120/patches-2.6.36/009-adm5120_leds_switch_trigger.patch
deleted file mode 100644 (file)
index f8e550d..0000000
+++ /dev/null
@@ -1,22 +0,0 @@
---- a/drivers/leds/Kconfig
-+++ b/drivers/leds/Kconfig
-@@ -398,4 +398,12 @@ config LEDS_TRIGGER_USBDEV
-         This allows LEDs to be controlled by the presence/activity of
-         an USB device. If unsure, say N.
-+config LEDS_TRIGGER_ADM5120_SWITCH
-+      tristate "LED ADM5120 Switch Port Status Trigger"
-+      depends on LEDS_TRIGGERS && ADM5120
-+      help
-+        This allows LEDs to be controlled by the port states of
-+        the ADM5120 built-in Ethernet Switch
-+        If unsure, say N.
-+
- endif # NEW_LEDS
---- a/drivers/leds/Makefile
-+++ b/drivers/leds/Makefile
-@@ -52,3 +52,4 @@ obj-$(CONFIG_LEDS_TRIGGER_DEFAULT_ON)        +=
- obj-$(CONFIG_LEDS_TRIGGER_MORSE)      += ledtrig-morse.o
- obj-$(CONFIG_LEDS_TRIGGER_NETDEV)     += ledtrig-netdev.o
- obj-$(CONFIG_LEDS_TRIGGER_USBDEV)     += ledtrig-usbdev.o
-+obj-$(CONFIG_LEDS_TRIGGER_ADM5120_SWITCH) += ledtrig-adm5120-switch.o
diff --git a/target/linux/adm5120/patches-2.6.36/101-cfi_fixup_macronix_bootloc.patch b/target/linux/adm5120/patches-2.6.36/101-cfi_fixup_macronix_bootloc.patch
deleted file mode 100644 (file)
index f833651..0000000
+++ /dev/null
@@ -1,84 +0,0 @@
---- a/drivers/mtd/chips/cfi_cmdset_0002.c
-+++ b/drivers/mtd/chips/cfi_cmdset_0002.c
-@@ -48,6 +48,12 @@
- #define SST49LF008A           0x005a
- #define AT49BV6416            0x00d6
-+/* Macronix */
-+#define MX29LV160B    0x2249  /* MX29LV160 Bottom-boot chip */
-+#define MX29LV160T    0x22C4  /* MX29LV160 Top-boot chip */
-+#define MX29LV320B    0x22A8  /* MX29LV320 Bottom-boot chip */
-+#define MX29LV320T    0x22A7  /* MX29LV320 Top-boot chip */
-+
- static int cfi_amdstd_read (struct mtd_info *, loff_t, size_t, size_t *, u_char *);
- static int cfi_amdstd_write_words(struct mtd_info *, loff_t, size_t, size_t *, const u_char *);
- static int cfi_amdstd_write_buffers(struct mtd_info *, loff_t, size_t, size_t *, const u_char *);
-@@ -328,6 +334,41 @@ static struct cfi_fixup cfi_nopri_fixup_
-       { 0, 0, NULL, NULL }
- };
-+#ifdef CONFIG_MTD_CFI_FIXUP_MACRONIX_BOOTLOC
-+/*
-+ * Some Macronix chips has no/bad bootblock information in the CFI table
-+ */
-+static void fixup_macronix_bootloc(struct mtd_info *mtd, void* param)
-+{
-+      struct map_info *map = mtd->priv;
-+      struct cfi_private *cfi = map->fldrv_priv;
-+      struct cfi_pri_amdstd *extp = cfi->cmdset_priv;
-+      __u8 t;
-+
-+      switch (cfi->id) {
-+      /* TODO: put affected chip ids here */
-+      case MX29LV160B:
-+      case MX29LV320B:
-+              t = 2;  /* Bottom boot */
-+              break;
-+      case MX29LV160T:
-+      case MX29LV320T:
-+              t = 3;  /* Top boot */
-+              break;
-+      default:
-+              return;
-+      }
-+
-+      if (extp->TopBottom == t)
-+              /* boot location detected by the CFI layer is correct */
-+              return;
-+
-+      extp->TopBottom = t;
-+      printk("%s: Macronix chip detected, id:0x%04X, boot location forced "
-+              "to %s\n", map->name, cfi->id, (t == 2) ? "bottom" : "top");
-+}
-+#endif /* CONFIG_MTD_CFI_FIXUP_MACRONIX_BOOTLOC */
-+
- static struct cfi_fixup cfi_fixup_table[] = {
-       { CFI_MFR_ATMEL, CFI_ID_ANY, fixup_convert_atmel_pri, NULL },
- #ifdef AMD_BOOTLOC_BUG
-@@ -364,6 +405,9 @@ static struct cfi_fixup fixup_table[] =
-        */
-       { CFI_MFR_ANY, CFI_ID_ANY, fixup_use_erase_chip, NULL },
-       { CFI_MFR_ATMEL, AT49BV6416, fixup_use_atmel_lock, NULL },
-+#ifdef CONFIG_MTD_CFI_FIXUP_MACRONIX_BOOTLOC
-+      { CFI_MFR_MACRONIX, CFI_ID_ANY, fixup_macronix_bootloc, NULL, },
-+#endif
-       { 0, 0, NULL, NULL }
- };
---- a/drivers/mtd/chips/Kconfig
-+++ b/drivers/mtd/chips/Kconfig
-@@ -196,6 +196,14 @@ config MTD_CFI_AMDSTD
-         provides support for one of those command sets, used on chips
-         including the AMD Am29LV320.
-+config MTD_CFI_FIXUP_MACRONIX_BOOTLOC
-+      bool "Fix boot-block location for Macronix flash chips"
-+      depends on MTD_CFI_AMDSTD
-+      help
-+        Some Macronix flash chips have no/wrong boot-block location in the
-+        CFI table, and the driver may detect the type incorrectly. Select
-+        this if your board has such chip.
-+
- config MTD_CFI_STAA
-       tristate "Support for ST (Advanced Architecture) flash chips"
-       depends on MTD_GEN_PROBE
diff --git a/target/linux/adm5120/patches-2.6.36/102-jedec_pmc_39lvxxx_chips.patch b/target/linux/adm5120/patches-2.6.36/102-jedec_pmc_39lvxxx_chips.patch
deleted file mode 100644 (file)
index 626cd85..0000000
+++ /dev/null
@@ -1,68 +0,0 @@
---- a/drivers/mtd/chips/jedec_probe.c
-+++ b/drivers/mtd/chips/jedec_probe.c
-@@ -116,6 +116,10 @@
- #define UPD29F064115  0x221C
- /* PMC */
-+#define PM39LV512     0x001B
-+#define PM39LV010     0x001C
-+#define PM39LV020     0x003D
-+#define PM39LV040     0x003E
- #define PM49FL002     0x006D
- #define PM49FL004     0x006E
- #define PM49FL008     0x006A
-@@ -1273,6 +1277,54 @@ static const struct amd_flash_info jedec
-                       ERASEINFO(0x02000,2),
-                       ERASEINFO(0x04000,1),
-               }
-+        }, {
-+              .mfr_id         = CFI_MFR_PMC,
-+              .dev_id         = PM39LV512,
-+              .name           = "PMC Pm39LV512",
-+              .devtypes       = CFI_DEVICETYPE_X8,
-+              .uaddr          = MTD_UADDR_0x0555_0x02AA,
-+              .dev_size       = SIZE_64KiB,
-+              .cmd_set        = P_ID_AMD_STD,
-+              .nr_regions     = 1,
-+              .regions        = {
-+                      ERASEINFO(0x01000,16),
-+              }
-+        }, {
-+              .mfr_id         = CFI_MFR_PMC,
-+              .dev_id         = PM39LV010,
-+              .name           = "PMC Pm39LV010",
-+              .devtypes       = CFI_DEVICETYPE_X8,
-+              .uaddr          = MTD_UADDR_0x0555_0x02AA,
-+              .dev_size       = SIZE_128KiB,
-+              .cmd_set        = P_ID_AMD_STD,
-+              .nr_regions     = 1,
-+              .regions        = {
-+                      ERASEINFO(0x01000,32),
-+              }
-+        }, {
-+              .mfr_id         = CFI_MFR_PMC,
-+              .dev_id         = PM39LV020,
-+              .name           = "PMC Pm39LV020",
-+              .devtypes       = CFI_DEVICETYPE_X8,
-+              .uaddr          = MTD_UADDR_0x0555_0x02AA,
-+              .dev_size       = SIZE_256KiB,
-+              .cmd_set        = P_ID_AMD_STD,
-+              .nr_regions     = 1,
-+              .regions        = {
-+                      ERASEINFO(0x01000,64),
-+              }
-+        }, {
-+              .mfr_id         = CFI_MFR_PMC,
-+              .dev_id         = PM39LV040,
-+              .name           = "PMC Pm39LV040",
-+              .devtypes       = CFI_DEVICETYPE_X8,
-+              .uaddr          = MTD_UADDR_0x0555_0x02AA,
-+              .dev_size       = SIZE_512KiB,
-+              .cmd_set        = P_ID_AMD_STD,
-+              .nr_regions     = 1,
-+              .regions        = {
-+                      ERASEINFO(0x01000,128),
-+              }
-       }, {
-               .mfr_id         = CFI_MFR_PMC,
-               .dev_id         = PM49FL002,
diff --git a/target/linux/adm5120/patches-2.6.36/103-mtd_trxsplit.patch b/target/linux/adm5120/patches-2.6.36/103-mtd_trxsplit.patch
deleted file mode 100644 (file)
index ec4f6c5..0000000
+++ /dev/null
@@ -1,24 +0,0 @@
---- a/drivers/mtd/Kconfig
-+++ b/drivers/mtd/Kconfig
-@@ -63,6 +63,11 @@ config MTD_ROOTFS_SPLIT
-       depends on MTD_PARTITIONS
-       default y
-+config MTD_TRXSPLIT
-+      bool "Automatically find and split TRX partitions"
-+      depends on MTD_PARTITIONS
-+      default n
-+
- config MTD_REDBOOT_PARTS
-       tristate "RedBoot partition table parsing"
-       depends on MTD_PARTITIONS
---- a/drivers/mtd/Makefile
-+++ b/drivers/mtd/Makefile
-@@ -8,6 +8,7 @@ mtd-y                          := mtdcore.o mtdsuper.o
- mtd-$(CONFIG_MTD_PARTITIONS)  += mtdpart.o
- obj-$(CONFIG_MTD_CONCAT)      += mtdconcat.o
-+obj-$(CONFIG_MTD_TRXSPLIT)    += trxsplit.o
- obj-$(CONFIG_MTD_REDBOOT_PARTS) += redboot.o
- obj-$(CONFIG_MTD_CMDLINE_PARTS) += cmdlinepart.o
- obj-$(CONFIG_MTD_AFS_PARTS)   += afs.o
diff --git a/target/linux/adm5120/patches-2.6.36/120-rb153_cf_driver.patch b/target/linux/adm5120/patches-2.6.36/120-rb153_cf_driver.patch
deleted file mode 100644 (file)
index 49e9340..0000000
+++ /dev/null
@@ -1,28 +0,0 @@
---- a/drivers/ata/Makefile
-+++ b/drivers/ata/Makefile
-@@ -86,6 +86,7 @@ obj-$(CONFIG_PATA_PALMLD)    += pata_palmld
- obj-$(CONFIG_PATA_PLATFORM)   += pata_platform.o
- obj-$(CONFIG_PATA_OF_PLATFORM)        += pata_of_platform.o
- obj-$(CONFIG_PATA_QDI)                += pata_qdi.o
-+obj-$(CONFIG_PATA_RB153_CF)   += pata_rb153_cf.o
- obj-$(CONFIG_PATA_RB532)      += pata_rb532_cf.o
- obj-$(CONFIG_PATA_RZ1000)     += pata_rz1000.o
- obj-$(CONFIG_PATA_SAMSUNG_CF) += pata_samsung_cf.o
---- a/drivers/ata/Kconfig
-+++ b/drivers/ata/Kconfig
-@@ -798,6 +798,15 @@ config PATA_QDI
-       help
-         Support for QDI 6500 and 6580 PATA controllers on VESA local bus.
-+config PATA_RB153_CF
-+      tristate "RouterBOARD 153 Compact Flash support"
-+      depends on ADM5120_MACH_RB_153
-+      help
-+        This option enables support for a Compact Flash connected on
-+        the RouterBOARD 153.
-+
-+        If unsure, say N.
-+
- config PATA_RB532
-       tristate "RouterBoard 532 PATA CompactFlash support"
-       depends on MIKROTIK_RB532
diff --git a/target/linux/adm5120/patches-2.6.36/200-amba_pl010_hacks.patch b/target/linux/adm5120/patches-2.6.36/200-amba_pl010_hacks.patch
deleted file mode 100644 (file)
index ed494e2..0000000
+++ /dev/null
@@ -1,378 +0,0 @@
---- a/drivers/serial/amba-pl010.c
-+++ b/drivers/serial/amba-pl010.c
-@@ -51,11 +51,10 @@
- #include <asm/io.h>
--#define UART_NR               8
--
- #define SERIAL_AMBA_MAJOR     204
- #define SERIAL_AMBA_MINOR     16
--#define SERIAL_AMBA_NR                UART_NR
-+#define SERIAL_AMBA_NR                CONFIG_SERIAL_AMBA_PL010_NUMPORTS
-+#define SERIAL_AMBA_NAME      CONFIG_SERIAL_AMBA_PL010_PORTNAME
- #define AMBA_ISR_PASS_LIMIT   256
-@@ -81,9 +80,9 @@ static void pl010_stop_tx(struct uart_po
-       struct uart_amba_port *uap = (struct uart_amba_port *)port;
-       unsigned int cr;
--      cr = readb(uap->port.membase + UART010_CR);
-+      cr = __raw_readl(uap->port.membase + UART010_CR);
-       cr &= ~UART010_CR_TIE;
--      writel(cr, uap->port.membase + UART010_CR);
-+      __raw_writel(cr, uap->port.membase + UART010_CR);
- }
- static void pl010_start_tx(struct uart_port *port)
-@@ -91,9 +90,9 @@ static void pl010_start_tx(struct uart_p
-       struct uart_amba_port *uap = (struct uart_amba_port *)port;
-       unsigned int cr;
--      cr = readb(uap->port.membase + UART010_CR);
-+      cr = __raw_readl(uap->port.membase + UART010_CR);
-       cr |= UART010_CR_TIE;
--      writel(cr, uap->port.membase + UART010_CR);
-+      __raw_writel(cr, uap->port.membase + UART010_CR);
- }
- static void pl010_stop_rx(struct uart_port *port)
-@@ -101,9 +100,9 @@ static void pl010_stop_rx(struct uart_po
-       struct uart_amba_port *uap = (struct uart_amba_port *)port;
-       unsigned int cr;
--      cr = readb(uap->port.membase + UART010_CR);
-+      cr = __raw_readl(uap->port.membase + UART010_CR);
-       cr &= ~(UART010_CR_RIE | UART010_CR_RTIE);
--      writel(cr, uap->port.membase + UART010_CR);
-+      __raw_writel(cr, uap->port.membase + UART010_CR);
- }
- static void pl010_enable_ms(struct uart_port *port)
-@@ -111,9 +110,9 @@ static void pl010_enable_ms(struct uart_
-       struct uart_amba_port *uap = (struct uart_amba_port *)port;
-       unsigned int cr;
--      cr = readb(uap->port.membase + UART010_CR);
-+      cr = __raw_readl(uap->port.membase + UART010_CR);
-       cr |= UART010_CR_MSIE;
--      writel(cr, uap->port.membase + UART010_CR);
-+      __raw_writel(cr, uap->port.membase + UART010_CR);
- }
- static void pl010_rx_chars(struct uart_amba_port *uap)
-@@ -121,9 +120,9 @@ static void pl010_rx_chars(struct uart_a
-       struct tty_struct *tty = uap->port.state->port.tty;
-       unsigned int status, ch, flag, rsr, max_count = 256;
--      status = readb(uap->port.membase + UART01x_FR);
-+      status = __raw_readl(uap->port.membase + UART01x_FR);
-       while (UART_RX_DATA(status) && max_count--) {
--              ch = readb(uap->port.membase + UART01x_DR);
-+              ch = __raw_readl(uap->port.membase + UART01x_DR);
-               flag = TTY_NORMAL;
-               uap->port.icount.rx++;
-@@ -132,9 +131,9 @@ static void pl010_rx_chars(struct uart_a
-                * Note that the error handling code is
-                * out of the main execution path
-                */
--              rsr = readb(uap->port.membase + UART01x_RSR) | UART_DUMMY_RSR_RX;
-+              rsr = __raw_readl(uap->port.membase + UART01x_RSR) | UART_DUMMY_RSR_RX;
-               if (unlikely(rsr & UART01x_RSR_ANY)) {
--                      writel(0, uap->port.membase + UART01x_ECR);
-+                      __raw_writel(0, uap->port.membase + UART01x_ECR);
-                       if (rsr & UART01x_RSR_BE) {
-                               rsr &= ~(UART01x_RSR_FE | UART01x_RSR_PE);
-@@ -164,7 +163,7 @@ static void pl010_rx_chars(struct uart_a
-               uart_insert_char(&uap->port, rsr, UART01x_RSR_OE, ch, flag);
-       ignore_char:
--              status = readb(uap->port.membase + UART01x_FR);
-+              status = __raw_readl(uap->port.membase + UART01x_FR);
-       }
-       spin_unlock(&uap->port.lock);
-       tty_flip_buffer_push(tty);
-@@ -177,7 +176,7 @@ static void pl010_tx_chars(struct uart_a
-       int count;
-       if (uap->port.x_char) {
--              writel(uap->port.x_char, uap->port.membase + UART01x_DR);
-+              __raw_writel(uap->port.x_char, uap->port.membase + UART01x_DR);
-               uap->port.icount.tx++;
-               uap->port.x_char = 0;
-               return;
-@@ -189,7 +188,7 @@ static void pl010_tx_chars(struct uart_a
-       count = uap->port.fifosize >> 1;
-       do {
--              writel(xmit->buf[xmit->tail], uap->port.membase + UART01x_DR);
-+              __raw_writel(xmit->buf[xmit->tail], uap->port.membase + UART01x_DR);
-               xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
-               uap->port.icount.tx++;
-               if (uart_circ_empty(xmit))
-@@ -207,9 +206,9 @@ static void pl010_modem_status(struct ua
- {
-       unsigned int status, delta;
--      writel(0, uap->port.membase + UART010_ICR);
-+      __raw_writel(0, uap->port.membase + UART010_ICR);
--      status = readb(uap->port.membase + UART01x_FR) & UART01x_FR_MODEM_ANY;
-+      status = __raw_readl(uap->port.membase + UART01x_FR) & UART01x_FR_MODEM_ANY;
-       delta = status ^ uap->old_status;
-       uap->old_status = status;
-@@ -237,7 +236,7 @@ static irqreturn_t pl010_int(int irq, vo
-       spin_lock(&uap->port.lock);
--      status = readb(uap->port.membase + UART010_IIR);
-+      status = __raw_readl(uap->port.membase + UART010_IIR);
-       if (status) {
-               do {
-                       if (status & (UART010_IIR_RTIS | UART010_IIR_RIS))
-@@ -250,7 +249,7 @@ static irqreturn_t pl010_int(int irq, vo
-                       if (pass_counter-- == 0)
-                               break;
--                      status = readb(uap->port.membase + UART010_IIR);
-+                      status = __raw_readl(uap->port.membase + UART010_IIR);
-               } while (status & (UART010_IIR_RTIS | UART010_IIR_RIS |
-                                  UART010_IIR_TIS));
-               handled = 1;
-@@ -264,7 +263,7 @@ static irqreturn_t pl010_int(int irq, vo
- static unsigned int pl010_tx_empty(struct uart_port *port)
- {
-       struct uart_amba_port *uap = (struct uart_amba_port *)port;
--      unsigned int status = readb(uap->port.membase + UART01x_FR);
-+      unsigned int status = __raw_readl(uap->port.membase + UART01x_FR);
-       return status & UART01x_FR_BUSY ? 0 : TIOCSER_TEMT;
- }
-@@ -274,7 +273,7 @@ static unsigned int pl010_get_mctrl(stru
-       unsigned int result = 0;
-       unsigned int status;
--      status = readb(uap->port.membase + UART01x_FR);
-+      status = __raw_readl(uap->port.membase + UART01x_FR);
-       if (status & UART01x_FR_DCD)
-               result |= TIOCM_CAR;
-       if (status & UART01x_FR_DSR)
-@@ -300,12 +299,12 @@ static void pl010_break_ctl(struct uart_
-       unsigned int lcr_h;
-       spin_lock_irqsave(&uap->port.lock, flags);
--      lcr_h = readb(uap->port.membase + UART010_LCRH);
-+      lcr_h = __raw_readl(uap->port.membase + UART010_LCRH);
-       if (break_state == -1)
-               lcr_h |= UART01x_LCRH_BRK;
-       else
-               lcr_h &= ~UART01x_LCRH_BRK;
--      writel(lcr_h, uap->port.membase + UART010_LCRH);
-+      __raw_writel(lcr_h, uap->port.membase + UART010_LCRH);
-       spin_unlock_irqrestore(&uap->port.lock, flags);
- }
-@@ -333,12 +332,12 @@ static int pl010_startup(struct uart_por
-       /*
-        * initialise the old status of the modem signals
-        */
--      uap->old_status = readb(uap->port.membase + UART01x_FR) & UART01x_FR_MODEM_ANY;
-+      uap->old_status = __raw_readl(uap->port.membase + UART01x_FR) & UART01x_FR_MODEM_ANY;
-       /*
-        * Finally, enable interrupts
-        */
--      writel(UART01x_CR_UARTEN | UART010_CR_RIE | UART010_CR_RTIE,
-+      __raw_writel(UART01x_CR_UARTEN | UART010_CR_RIE | UART010_CR_RTIE,
-              uap->port.membase + UART010_CR);
-       return 0;
-@@ -361,10 +360,10 @@ static void pl010_shutdown(struct uart_p
-       /*
-        * disable all interrupts, disable the port
-        */
--      writel(0, uap->port.membase + UART010_CR);
-+      __raw_writel(0, uap->port.membase + UART010_CR);
-       /* disable break condition and fifos */
--      writel(readb(uap->port.membase + UART010_LCRH) &
-+      __raw_writel(__raw_readl(uap->port.membase + UART010_LCRH) &
-               ~(UART01x_LCRH_BRK | UART01x_LCRH_FEN),
-              uap->port.membase + UART010_LCRH);
-@@ -386,7 +385,7 @@ pl010_set_termios(struct uart_port *port
-       /*
-        * Ask the core to calculate the divisor for us.
-        */
--      baud = uart_get_baud_rate(port, termios, old, 0, uap->port.uartclk/16); 
-+      baud = uart_get_baud_rate(port, termios, old, 0, uap->port.uartclk/16);
-       quot = uart_get_divisor(port, baud);
-       switch (termios->c_cflag & CSIZE) {
-@@ -449,25 +448,25 @@ pl010_set_termios(struct uart_port *port
-               uap->port.ignore_status_mask |= UART_DUMMY_RSR_RX;
-       /* first, disable everything */
--      old_cr = readb(uap->port.membase + UART010_CR) & ~UART010_CR_MSIE;
-+      old_cr = __raw_readl(uap->port.membase + UART010_CR) & ~UART010_CR_MSIE;
-       if (UART_ENABLE_MS(port, termios->c_cflag))
-               old_cr |= UART010_CR_MSIE;
--      writel(0, uap->port.membase + UART010_CR);
-+      __raw_writel(0, uap->port.membase + UART010_CR);
-       /* Set baud rate */
-       quot -= 1;
--      writel((quot & 0xf00) >> 8, uap->port.membase + UART010_LCRM);
--      writel(quot & 0xff, uap->port.membase + UART010_LCRL);
-+      __raw_writel((quot & 0xf00) >> 8, uap->port.membase + UART010_LCRM);
-+      __raw_writel(quot & 0xff, uap->port.membase + UART010_LCRL);
-       /*
-        * ----------v----------v----------v----------v-----
-        * NOTE: MUST BE WRITTEN AFTER UARTLCR_M & UARTLCR_L
-        * ----------^----------^----------^----------^-----
-        */
--      writel(lcr_h, uap->port.membase + UART010_LCRH);
--      writel(old_cr, uap->port.membase + UART010_CR);
-+      __raw_writel(lcr_h, uap->port.membase + UART010_LCRH);
-+      __raw_writel(old_cr, uap->port.membase + UART010_CR);
-       spin_unlock_irqrestore(&uap->port.lock, flags);
- }
-@@ -549,7 +548,7 @@ static struct uart_ops amba_pl010_pops =
-       .verify_port    = pl010_verify_port,
- };
--static struct uart_amba_port *amba_ports[UART_NR];
-+static struct uart_amba_port *amba_ports[SERIAL_AMBA_NR];
- #ifdef CONFIG_SERIAL_AMBA_PL010_CONSOLE
-@@ -559,10 +558,10 @@ static void pl010_console_putchar(struct
-       unsigned int status;
-       do {
--              status = readb(uap->port.membase + UART01x_FR);
-+              status = __raw_readl(uap->port.membase + UART01x_FR);
-               barrier();
-       } while (!UART_TX_READY(status));
--      writel(ch, uap->port.membase + UART01x_DR);
-+      __raw_writel(ch, uap->port.membase + UART01x_DR);
- }
- static void
-@@ -576,8 +575,8 @@ pl010_console_write(struct console *co,
-       /*
-        *      First save the CR then disable the interrupts
-        */
--      old_cr = readb(uap->port.membase + UART010_CR);
--      writel(UART01x_CR_UARTEN, uap->port.membase + UART010_CR);
-+      old_cr = __raw_readl(uap->port.membase + UART010_CR);
-+      __raw_writel(UART01x_CR_UARTEN, uap->port.membase + UART010_CR);
-       uart_console_write(&uap->port, s, count, pl010_console_putchar);
-@@ -586,10 +585,10 @@ pl010_console_write(struct console *co,
-        *      and restore the TCR
-        */
-       do {
--              status = readb(uap->port.membase + UART01x_FR);
-+              status = __raw_readl(uap->port.membase + UART01x_FR);
-               barrier();
-       } while (status & UART01x_FR_BUSY);
--      writel(old_cr, uap->port.membase + UART010_CR);
-+      __raw_writel(old_cr, uap->port.membase + UART010_CR);
-       clk_disable(uap->clk);
- }
-@@ -598,9 +597,9 @@ static void __init
- pl010_console_get_options(struct uart_amba_port *uap, int *baud,
-                            int *parity, int *bits)
- {
--      if (readb(uap->port.membase + UART010_CR) & UART01x_CR_UARTEN) {
-+      if (__raw_readl(uap->port.membase + UART010_CR) & UART01x_CR_UARTEN) {
-               unsigned int lcr_h, quot;
--              lcr_h = readb(uap->port.membase + UART010_LCRH);
-+              lcr_h = __raw_readl(uap->port.membase + UART010_LCRH);
-               *parity = 'n';
-               if (lcr_h & UART01x_LCRH_PEN) {
-@@ -615,8 +614,8 @@ pl010_console_get_options(struct uart_am
-               else
-                       *bits = 8;
--              quot = readb(uap->port.membase + UART010_LCRL) |
--                     readb(uap->port.membase + UART010_LCRM) << 8;
-+              quot = __raw_readl(uap->port.membase + UART010_LCRL) |
-+                     __raw_readl(uap->port.membase + UART010_LCRM) << 8;
-               *baud = uap->port.uartclk / (16 * (quot + 1));
-       }
- }
-@@ -634,7 +633,7 @@ static int __init pl010_console_setup(st
-        * if so, search for the first available port that does have
-        * console support.
-        */
--      if (co->index >= UART_NR)
-+      if (co->index >= SERIAL_AMBA_NR)
-               co->index = 0;
-       uap = amba_ports[co->index];
-       if (!uap)
-@@ -652,7 +651,7 @@ static int __init pl010_console_setup(st
- static struct uart_driver amba_reg;
- static struct console amba_console = {
--      .name           = "ttyAM",
-+      .name           = SERIAL_AMBA_NAME,
-       .write          = pl010_console_write,
-       .device         = uart_console_device,
-       .setup          = pl010_console_setup,
-@@ -668,11 +667,11 @@ static struct console amba_console = {
- static struct uart_driver amba_reg = {
-       .owner                  = THIS_MODULE,
--      .driver_name            = "ttyAM",
--      .dev_name               = "ttyAM",
-+      .driver_name            = SERIAL_AMBA_NAME,
-+      .dev_name               = SERIAL_AMBA_NAME,
-       .major                  = SERIAL_AMBA_MAJOR,
-       .minor                  = SERIAL_AMBA_MINOR,
--      .nr                     = UART_NR,
-+      .nr                     = SERIAL_AMBA_NR,
-       .cons                   = AMBA_CONSOLE,
- };
---- a/drivers/serial/Kconfig
-+++ b/drivers/serial/Kconfig
-@@ -276,10 +276,25 @@ config SERIAL_AMBA_PL010
-       help
-         This selects the ARM(R) AMBA(R) PrimeCell PL010 UART.  If you have
-         an Integrator/AP or Integrator/PP2 platform, or if you have a
--        Cirrus Logic EP93xx CPU, say Y or M here.
-+        Cirrus Logic EP93xx CPU or an Infineon ADM5120 SOC, say Y or M here.
-         If unsure, say N.
-+config SERIAL_AMBA_PL010_NUMPORTS
-+      int "Maximum number of AMBA PL010 serial ports"
-+      depends on SERIAL_AMBA_PL010
-+      default "8"
-+      ---help---
-+        Set this to the number of serial ports you want the AMBA PL010 driver
-+        to support.
-+
-+config SERIAL_AMBA_PL010_PORTNAME
-+      string "Name of the AMBA PL010 serial ports"
-+      depends on SERIAL_AMBA_PL010
-+      default "ttyAM"
-+      ---help---
-+        ::: To be written :::
-+
- config SERIAL_AMBA_PL010_CONSOLE
-       bool "Support for console on AMBA serial port"
-       depends on SERIAL_AMBA_PL010=y
diff --git a/target/linux/adm5120/patches-2.6.36/201-amba_bus_hacks.patch b/target/linux/adm5120/patches-2.6.36/201-amba_bus_hacks.patch
deleted file mode 100644 (file)
index 9db3e55..0000000
+++ /dev/null
@@ -1,13 +0,0 @@
---- a/drivers/amba/bus.c
-+++ b/drivers/amba/bus.c
-@@ -18,6 +18,10 @@
- #include <asm/irq.h>
- #include <asm/sizes.h>
-+#ifndef NO_IRQ
-+#define NO_IRQ                (-1)
-+#endif
-+
- #define to_amba_device(d)     container_of(d, struct amba_device, dev)
- #define to_amba_driver(d)     container_of(d, struct amba_driver, drv)
diff --git a/target/linux/adm5120/patches-2.6.36/203-gpio_leds_brightness.patch b/target/linux/adm5120/patches-2.6.36/203-gpio_leds_brightness.patch
deleted file mode 100644 (file)
index ac3c516..0000000
+++ /dev/null
@@ -1,27 +0,0 @@
---- a/drivers/leds/leds-gpio.c
-+++ b/drivers/leds/leds-gpio.c
-@@ -52,13 +52,17 @@ static void gpio_led_set(struct led_clas
-               container_of(led_cdev, struct gpio_led_data, cdev);
-       int level;
--      if (value == LED_OFF)
--              level = 0;
--      else
--              level = 1;
--
--      if (led_dat->active_low)
--              level = !level;
-+      switch (value) {
-+      case LED_OFF:
-+              level = led_dat->active_low ? 1 : 0;
-+              break;
-+      case LED_FULL:
-+              level = led_dat->active_low ? 0 : 1;
-+              break;
-+      default:
-+              level = value;
-+              break;
-+      }
-       /* Setting GPIOs with I2C/etc requires a task context, and we don't
-        * seem to have a reliable way to know if we're already in one; so
diff --git a/target/linux/adm5120/patches-2.6.36/310-adm5120_wdt.patch b/target/linux/adm5120/patches-2.6.36/310-adm5120_wdt.patch
deleted file mode 100644 (file)
index 23cc54d..0000000
+++ /dev/null
@@ -1,31 +0,0 @@
---- a/drivers/watchdog/Kconfig
-+++ b/drivers/watchdog/Kconfig
-@@ -848,6 +848,18 @@ config RC32434_WDT
-         To compile this driver as a module, choose M here: the
-         module will be called rc32434_wdt.
-+config ADM5120_WDT
-+      tristate "Infineon ADM5120 SoC hardware watchdog"
-+      depends on WATCHDOG && ADM5120
-+      help
-+        This is a driver for hardware watchdog integrated in Infineon
-+        ADM5120 SoC. This watchdog simply watches your kernel to make sure
-+        it doesn't freeze, and if it does, it reboots your computer after a
-+        certain amount of time.
-+
-+        To compile this driver as a module, choose M here: the module will be
-+        called adm5120_wdt.
-+
- config INDYDOG
-       tristate "Indy/I2 Hardware Watchdog"
-       depends on SGI_HAS_INDYDOG
---- a/drivers/watchdog/Makefile
-+++ b/drivers/watchdog/Makefile
-@@ -110,6 +110,7 @@ obj-$(CONFIG_SBC_EPX_C3_WATCHDOG) += sbc
- # MIPS Architecture
- obj-$(CONFIG_BCM47XX_WDT) += bcm47xx_wdt.o
- obj-$(CONFIG_RC32434_WDT) += rc32434_wdt.o
-+obj-$(CONFIG_ADM5120_WDT) += adm5120_wdt.o
- obj-$(CONFIG_INDYDOG) += indydog.o
- obj-$(CONFIG_WDT_MTX1) += mtx-1_wdt.o
- obj-$(CONFIG_PNX833X_WDT) += pnx833x_wdt.o
diff --git a/target/linux/adm5120/patches-2.6.36/901-adm5120-usb-fix-compiler-warning.patch b/target/linux/adm5120/patches-2.6.36/901-adm5120-usb-fix-compiler-warning.patch
deleted file mode 100644 (file)
index 93149df..0000000
+++ /dev/null
@@ -1,11 +0,0 @@
---- a/drivers/usb/host/adm5120-dbg.c
-+++ b/drivers/usb/host/adm5120-dbg.c
-@@ -133,7 +133,7 @@ urb_print(struct admhcd *ahcd, struct ur
- #define admhc_dbg_sw(ahcd, next, size, format, arg...) \
-       do { \
--      if (next) { \
-+      if (next != NULL) { \
-               unsigned s_len; \
-               s_len = scnprintf(*next, *size, format, ## arg ); \
-               *size -= s_len; *next += s_len; \
diff --git a/target/linux/adm5120/patches-2.6.36/902-adm5120-usb-remove-dev-power-power_state.patch b/target/linux/adm5120/patches-2.6.36/902-adm5120-usb-remove-dev-power-power_state.patch
deleted file mode 100644 (file)
index 4fd0283..0000000
+++ /dev/null
@@ -1,11 +0,0 @@
---- a/drivers/usb/host/adm5120-dbg.c
-+++ b/drivers/usb/host/adm5120-dbg.c
-@@ -642,7 +642,7 @@ static ssize_t fill_registers_buffer(str
-               hcd->product_desc,
-               hcd_name);
--      if (bus->controller->power.power_state.event) {
-+      if (!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags)) {
-               size -= scnprintf(next, size,
-                       "SUSPENDED (no register access)\n");
-               goto done;
diff --git a/target/linux/adm5120/patches-2.6.36/903-adm5120-usb-use-the-admhcd-structure-directly-in-debugfs-files.patch b/target/linux/adm5120/patches-2.6.36/903-adm5120-usb-use-the-admhcd-structure-directly-in-debugfs-files.patch
deleted file mode 100644 (file)
index aa50f8c..0000000
+++ /dev/null
@@ -1,116 +0,0 @@
---- a/drivers/usb/host/adm5120-dbg.c
-+++ b/drivers/usb/host/adm5120-dbg.c
-@@ -419,7 +419,7 @@ static struct dentry *admhc_debug_root;
- struct debug_buffer {
-       ssize_t (*fill_func)(struct debug_buffer *);    /* fill method */
--      struct device *dev;
-+      struct admhcd *ahcd;
-       struct mutex mutex;     /* protect filling of buffer */
-       size_t count;           /* number of characters filled into buffer */
-       char *page;
-@@ -494,15 +494,11 @@ show_list(struct admhcd *ahcd, char *buf
- static ssize_t fill_async_buffer(struct debug_buffer *buf)
- {
--      struct usb_bus          *bus;
--      struct usb_hcd          *hcd;
-       struct admhcd           *ahcd;
-       size_t                  temp;
-       unsigned long           flags;
--      bus = dev_get_drvdata(buf->dev);
--      hcd = bus_to_hcd(bus);
--      ahcd = hcd_to_admhcd(hcd);
-+      ahcd = buf->ahcd;
-       spin_lock_irqsave(&ahcd->lock, flags);
-       temp = show_list(ahcd, buf->page, PAGE_SIZE, ahcd->ed_head);
-@@ -516,8 +512,6 @@ static ssize_t fill_async_buffer(struct
- static ssize_t fill_periodic_buffer(struct debug_buffer *buf)
- {
--      struct usb_bus          *bus;
--      struct usb_hcd          *hcd;
-       struct admhcd           *ahcd;
-       struct ed               **seen, *ed;
-       unsigned long           flags;
-@@ -529,9 +523,7 @@ static ssize_t fill_periodic_buffer(stru
-               return 0;
-       seen_count = 0;
--      bus = dev_get_drvdata(buf->dev);
--      hcd = bus_to_hcd(bus);
--      ahcd = hcd_to_admhcd(hcd);
-+      ahcd = buf->ahcd;
-       next = buf->page;
-       size = PAGE_SIZE;
-@@ -613,7 +605,6 @@ static ssize_t fill_periodic_buffer(stru
- static ssize_t fill_registers_buffer(struct debug_buffer *buf)
- {
--      struct usb_bus          *bus;
-       struct usb_hcd          *hcd;
-       struct admhcd           *ahcd;
-       struct admhcd_regs __iomem *regs;
-@@ -622,9 +613,8 @@ static ssize_t fill_registers_buffer(str
-       char                    *next;
-       u32                     rdata;
--      bus = dev_get_drvdata(buf->dev);
--      hcd = bus_to_hcd(bus);
--      ahcd = hcd_to_admhcd(hcd);
-+      ahcd = buf->ahcd;
-+      hcd = admhcd_to_hcd(ahcd);
-       regs = ahcd->regs;
-       next = buf->page;
-       size = PAGE_SIZE;
-@@ -689,7 +679,7 @@ done:
- }
--static struct debug_buffer *alloc_buffer(struct device *dev,
-+static struct debug_buffer *alloc_buffer(struct admhcd *ahcd,
-                               ssize_t (*fill_func)(struct debug_buffer *))
- {
-       struct debug_buffer *buf;
-@@ -697,7 +687,7 @@ static struct debug_buffer *alloc_buffer
-       buf = kzalloc(sizeof(struct debug_buffer), GFP_KERNEL);
-       if (buf) {
--              buf->dev = dev;
-+              buf->ahcd = ahcd;
-               buf->fill_func = fill_func;
-               mutex_init(&buf->mutex);
-       }
-@@ -790,26 +780,25 @@ static int debug_registers_open(struct i
- static inline void create_debug_files(struct admhcd *ahcd)
- {
-       struct usb_bus *bus = &admhcd_to_hcd(ahcd)->self;
--      struct device *dev = bus->dev;
-       ahcd->debug_dir = debugfs_create_dir(bus->bus_name, admhc_debug_root);
-       if (!ahcd->debug_dir)
-               goto dir_error;
-       ahcd->debug_async = debugfs_create_file("async", S_IRUGO,
--                                              ahcd->debug_dir, dev,
-+                                              ahcd->debug_dir, ahcd,
-                                               &debug_async_fops);
-       if (!ahcd->debug_async)
-               goto async_error;
-       ahcd->debug_periodic = debugfs_create_file("periodic", S_IRUGO,
--                                              ahcd->debug_dir, dev,
-+                                              ahcd->debug_dir, ahcd,
-                                               &debug_periodic_fops);
-       if (!ahcd->debug_periodic)
-               goto periodic_error;
-       ahcd->debug_registers = debugfs_create_file("registers", S_IRUGO,
--                                              ahcd->debug_dir, dev,
-+                                              ahcd->debug_dir, ahcd,
-                                               &debug_registers_fops);
-       if (!ahcd->debug_registers)
-               goto registers_error;
diff --git a/target/linux/adm5120/patches-2.6.36/906-adm5120sw-mc_count-fix.patch b/target/linux/adm5120/patches-2.6.36/906-adm5120sw-mc_count-fix.patch
deleted file mode 100644 (file)
index cb1b376..0000000
+++ /dev/null
@@ -1,11 +0,0 @@
---- a/drivers/net/adm5120sw.c
-+++ b/drivers/net/adm5120sw.c
-@@ -937,7 +937,7 @@ static void adm5120_if_set_multicast_lis
-               t |= (ports << CPUP_CONF_DUNP_SHIFT);
-       if (dev->flags & IFF_PROMISC || dev->flags & IFF_ALLMULTI ||
--                                      dev->mc_count)
-+                                      netdev_mc_count(dev))
-               /* enable multicast packets */
-               t &= ~(ports << CPUP_CONF_DMCP_SHIFT);
-       else
diff --git a/target/linux/adm5120/patches-2.6.36/930-2_6_36_ports.patch b/target/linux/adm5120/patches-2.6.36/930-2_6_36_ports.patch
deleted file mode 100644 (file)
index 1e51c47..0000000
+++ /dev/null
@@ -1,119 +0,0 @@
---- a/arch/mips/include/asm/war.h
-+++ b/arch/mips/include/asm/war.h
-@@ -9,7 +9,7 @@
- #ifndef _ASM_WAR_H
- #define _ASM_WAR_H
--#include <war.h>
-+#include <asm/mach-adm5120/war.h>
- /*
-  * Work around certain R4000 CPU errata (as implemented by GCC):
---- a/drivers/amba/bus.c
-+++ b/drivers/amba/bus.c
-@@ -16,7 +16,7 @@
- #include <linux/amba/bus.h>
- #include <asm/irq.h>
--#include <asm/sizes.h>
-+#include <asm/mach-adm5120/asm/sizes.h>
- #ifndef NO_IRQ
- #define NO_IRQ                (-1)
---- a/drivers/watchdog/adm5120_wdt.c
-+++ b/drivers/watchdog/adm5120_wdt.c
-@@ -167,7 +167,7 @@ static struct file_operations wdt_fops =
-       owner:          THIS_MODULE,
-       llseek:         no_llseek,
-       write:          wdt_write,
--      ioctl:          wdt_ioctl,
-+      unlocked_ioctl: wdt_ioctl,
-       open:           wdt_open,
-       release:        wdt_release,
- };
---- a/arch/mips/Kbuild.platforms
-+++ b/arch/mips/Kbuild.platforms
-@@ -1,5 +1,6 @@
- # All platforms listed in alphabetic order
-+platforms += adm5120
- platforms += alchemy
- platforms += ar7
- platforms += bcm47xx
---- a/drivers/net/adm5120sw.c
-+++ b/drivers/net/adm5120sw.c
-@@ -26,6 +26,7 @@
- #include <linux/platform_device.h>
- #include <linux/io.h>
- #include <linux/irq.h>
-+#include <asm/mach-adm5120/irq.h>
- #include <linux/netdevice.h>
- #include <linux/etherdevice.h>
---- a/arch/mips/adm5120/common/clock.c
-+++ b/arch/mips/adm5120/common/clock.c
-@@ -33,7 +33,7 @@ static struct clk uart_clk = {
- struct clk *clk_get(struct device *dev, const char *id)
- {
--      char *name = dev_name(dev);
-+      const char *name = dev_name(dev);
-       if (!strcmp(name, "apb:uart0") || !strcmp(name, "apb:uart1"))
-               return &uart_clk;
---- /dev/null
-+++ b/arch/mips/adm5120/Platform
-@@ -0,0 +1,53 @@
-+#
-+# Core Infineon/ADMtek ADM5120
-+#
-+platform-$(CONFIG_ADM5120) += adm5120/common/
-+
-+#
-+# OEM CELLVISION
-+#
-+platform-$(CONFIG_ADM5120_OEM_CELLVISION)     += adm5120/cellvision/
-+
-+#
-+# OEM COMPEX
-+#
-+platform-$(CONFIG_ADM5120_OEM_COMPEX)         += adm5120/compex/
-+
-+#
-+# OEM EDIMAX
-+#
-+platform-$(CONFIG_ADM5120_OEM_EDIMAX)         += adm5120/edimax/
-+
-+#
-+# OEM GENERIC
-+#
-+platform-$(CONFIG_ADM5120_OEM_GENERIC)                += adm5120/generic/
-+
-+#
-+# OEM INFINEON
-+#
-+platform-$(CONFIG_ADM5120_OEM_INFINEON)               += adm5120/infineon/
-+
-+#
-+# OEM MIKROTIK
-+#
-+platform-$(CONFIG_ADM5120_OEM_MIKROTIK)               += adm5120/mikrotik/
-+
-+#
-+# OEM MOTOROLA
-+#
-+platform-$(CONFIG_ADM5120_OEM_MOTOROLA)               += adm5120/motorola/
-+
-+#
-+# OEM OSBRIDGE
-+#
-+platform-$(CONFIG_ADM5120_OEM_OSBRIDGE)               += adm5120/osbridge/
-+
-+#
-+# OEM ZYXEL
-+#
-+platform-$(CONFIG_ADM5120_OEM_ZYXEL)          += adm5120/zyxel/
-+
-+cflags-$(CONFIG_ADM5120)                      += -I$(srctree)/arch/mips/include/asm/mach-adm5120
-+libs-$(CONFIG_ADM5120)                                += arch/mips/adm5120/prom/
-+load-$(CONFIG_ADM5120)                                += 0xffffffff80001000
diff --git a/target/linux/adm5120/patches-2.6.37/001-adm5120.patch b/target/linux/adm5120/patches-2.6.37/001-adm5120.patch
deleted file mode 100644 (file)
index ddcb126..0000000
+++ /dev/null
@@ -1,32 +0,0 @@
---- a/arch/mips/Kconfig
-+++ b/arch/mips/Kconfig
-@@ -29,6 +29,21 @@ choice
-       prompt "System type"
-       default SGI_IP22
-+config ADM5120
-+      bool "Infineon/ADMtek ADM5120 SoC based machines"
-+      select CEVT_R4K
-+      select CSRC_R4K
-+      select SYS_HAS_CPU_MIPS32_R1
-+      select SYS_HAS_EARLY_PRINTK
-+      select DMA_NONCOHERENT
-+      select IRQ_CPU
-+      select SYS_SUPPORTS_LITTLE_ENDIAN
-+      select SYS_SUPPORTS_BIG_ENDIAN
-+      select SYS_SUPPORTS_32BIT_KERNEL
-+      select ARCH_REQUIRE_GPIOLIB
-+      select SWAP_IO_SPACE if CPU_BIG_ENDIAN
-+      select MIPS_MACHINE
-+
- config MIPS_ALCHEMY
-       bool "Alchemy processor based machines"
-       select 64BIT_PHYS_ADDR
-@@ -714,6 +729,7 @@ config CAVIUM_OCTEON_REFERENCE_BOARD
- endchoice
-+source "arch/mips/adm5120/Kconfig"
- source "arch/mips/alchemy/Kconfig"
- source "arch/mips/bcm63xx/Kconfig"
- source "arch/mips/jazz/Kconfig"
diff --git a/target/linux/adm5120/patches-2.6.37/002-adm5120_flash.patch b/target/linux/adm5120/patches-2.6.37/002-adm5120_flash.patch
deleted file mode 100644 (file)
index 3df59fd..0000000
+++ /dev/null
@@ -1,21 +0,0 @@
---- a/drivers/mtd/maps/Kconfig
-+++ b/drivers/mtd/maps/Kconfig
-@@ -552,4 +552,8 @@ config MTD_PISMO
-         When built as a module, it will be called pismo.ko
-+config MTD_ADM5120
-+      tristate "Map driver for ADM5120 based boards"
-+      depends on ADM5120
-+
- endmenu
---- a/drivers/mtd/maps/Makefile
-+++ b/drivers/mtd/maps/Makefile
-@@ -40,6 +40,7 @@ obj-$(CONFIG_MTD_SCx200_DOCFLASH)+= scx2
- obj-$(CONFIG_MTD_DBOX2)               += dbox2-flash.o
- obj-$(CONFIG_MTD_SOLUTIONENGINE)+= solutionengine.o
- obj-$(CONFIG_MTD_PCI)         += pci.o
-+obj-$(CONFIG_MTD_ADM5120)     += adm5120-flash.o
- obj-$(CONFIG_MTD_AUTCPU12)    += autcpu12-nvram.o
- obj-$(CONFIG_MTD_EDB7312)     += edb7312.o
- obj-$(CONFIG_MTD_IMPA7)               += impa7.o
diff --git a/target/linux/adm5120/patches-2.6.37/003-adm5120_switch.patch b/target/linux/adm5120/patches-2.6.37/003-adm5120_switch.patch
deleted file mode 100644 (file)
index 30347ae..0000000
+++ /dev/null
@@ -1,23 +0,0 @@
---- a/drivers/net/Kconfig
-+++ b/drivers/net/Kconfig
-@@ -494,6 +494,10 @@ config MIPS_AU1X00_ENET
-         If you have an Alchemy Semi AU1X00 based system
-         say Y.  Otherwise, say N.
-+config ADM5120_ENET
-+      tristate "ADM5120 Ethernet switch support"
-+      depends on ADM5120
-+
- config SGI_IOC3_ETH
-       bool "SGI IOC3 Ethernet"
-       depends on PCI && SGI_IP27
---- a/drivers/net/Makefile
-+++ b/drivers/net/Makefile
-@@ -216,6 +216,7 @@ obj-$(CONFIG_SC92031) += sc92031.o
- # This is also a 82596 and should probably be merged
- obj-$(CONFIG_LP486E) += lp486e.o
-+obj-$(CONFIG_ADM5120_ENET) += adm5120sw.o
- obj-$(CONFIG_ETH16I) += eth16i.o
- obj-$(CONFIG_ZORRO8390) += zorro8390.o 8390.o
- obj-$(CONFIG_HPLANCE) += hplance.o 7990.o
diff --git a/target/linux/adm5120/patches-2.6.37/005-adm5120_usb.patch b/target/linux/adm5120/patches-2.6.37/005-adm5120_usb.patch
deleted file mode 100644 (file)
index 8b5a553..0000000
+++ /dev/null
@@ -1,33 +0,0 @@
---- a/drivers/usb/Makefile
-+++ b/drivers/usb/Makefile
-@@ -9,6 +9,7 @@ obj-$(CONFIG_USB)              += core/
- obj-$(CONFIG_USB_MON)         += mon/
- obj-$(CONFIG_PCI)             += host/
-+obj-$(CONFIG_USB_ADM5120_HCD) += host/
- obj-$(CONFIG_USB_EHCI_HCD)    += host/
- obj-$(CONFIG_USB_ISP116X_HCD) += host/
- obj-$(CONFIG_USB_OHCI_HCD)    += host/
---- a/drivers/usb/host/Kconfig
-+++ b/drivers/usb/host/Kconfig
-@@ -4,6 +4,10 @@
- comment "USB Host Controller Drivers"
-       depends on USB
-+config USB_ADM5120_HCD
-+      tristate "ADM5120 HCD support (EXPERIMENTAL)"
-+      depends on USB && ADM5120 && EXPERIMENTAL
-+
- config USB_C67X00_HCD
-       tristate "Cypress C67x00 HCD support"
-       depends on USB
---- a/drivers/usb/host/Makefile
-+++ b/drivers/usb/host/Makefile
-@@ -18,6 +18,7 @@ obj-$(CONFIG_USB_WHCI_HCD)   += whci/
- obj-$(CONFIG_PCI)             += pci-quirks.o
-+obj-$(CONFIG_USB_ADM5120_HCD) += adm5120-hcd.o
- obj-$(CONFIG_USB_EHCI_HCD)    += ehci-hcd.o
- obj-$(CONFIG_USB_OXU210HP_HCD)        += oxu210hp-hcd.o
- obj-$(CONFIG_USB_ISP116X_HCD) += isp116x-hcd.o
diff --git a/target/linux/adm5120/patches-2.6.37/007-adm5120_pci.patch b/target/linux/adm5120/patches-2.6.37/007-adm5120_pci.patch
deleted file mode 100644 (file)
index 26205f8..0000000
+++ /dev/null
@@ -1,22 +0,0 @@
---- a/arch/mips/pci/Makefile
-+++ b/arch/mips/pci/Makefile
-@@ -55,6 +55,7 @@ obj-$(CONFIG_ZAO_CAPCELLA)   += fixup-capc
- obj-$(CONFIG_WR_PPMC)         += fixup-wrppmc.o
- obj-$(CONFIG_MIKROTIK_RB532)  += pci-rc32434.o ops-rc32434.o fixup-rc32434.o
- obj-$(CONFIG_CPU_CAVIUM_OCTEON)       += pci-octeon.o pcie-octeon.o
-+obj-$(CONFIG_ADM5120)         += pci-adm5120.o
- ifdef CONFIG_PCI_MSI
- obj-$(CONFIG_CPU_CAVIUM_OCTEON)       += msi-octeon.o
---- a/include/linux/pci_ids.h
-+++ b/include/linux/pci_ids.h
-@@ -1765,6 +1765,9 @@
- #define PCI_VENDOR_ID_ESDGMBH         0x12fe
- #define PCI_DEVICE_ID_ESDGMBH_CPCIASIO4 0x0111
-+#define PCI_VENDOR_ID_ADMTEK          0x1317
-+#define PCI_DEVICE_ID_ADMTEK_ADM5120  0x5120
-+
- #define PCI_VENDOR_ID_SIIG            0x131f
- #define PCI_SUBVENDOR_ID_SIIG         0x131f
- #define PCI_DEVICE_ID_SIIG_1S_10x_550 0x1000
diff --git a/target/linux/adm5120/patches-2.6.37/009-adm5120_leds_switch_trigger.patch b/target/linux/adm5120/patches-2.6.37/009-adm5120_leds_switch_trigger.patch
deleted file mode 100644 (file)
index 2f6eaf0..0000000
+++ /dev/null
@@ -1,22 +0,0 @@
---- a/drivers/leds/Kconfig
-+++ b/drivers/leds/Kconfig
-@@ -322,4 +322,12 @@ config LEDS_TRIGGER_USBDEV
-         This allows LEDs to be controlled by the presence/activity of
-         an USB device. If unsure, say N.
-+config LEDS_TRIGGER_ADM5120_SWITCH
-+      tristate "LED ADM5120 Switch Port Status Trigger"
-+      depends on LEDS_TRIGGERS && ADM5120
-+      help
-+        This allows LEDs to be controlled by the port states of
-+        the ADM5120 built-in Ethernet Switch
-+        If unsure, say N.
-+
- endif # NEW_LEDS
---- a/drivers/leds/Makefile
-+++ b/drivers/leds/Makefile
-@@ -43,3 +43,4 @@ obj-$(CONFIG_LEDS_TRIGGER_DEFAULT_ON)        +=
- obj-$(CONFIG_LEDS_TRIGGER_MORSE)      += ledtrig-morse.o
- obj-$(CONFIG_LEDS_TRIGGER_NETDEV)     += ledtrig-netdev.o
- obj-$(CONFIG_LEDS_TRIGGER_USBDEV)     += ledtrig-usbdev.o
-+obj-$(CONFIG_LEDS_TRIGGER_ADM5120_SWITCH) += ledtrig-adm5120-switch.o
diff --git a/target/linux/adm5120/patches-2.6.37/101-cfi_fixup_macronix_bootloc.patch b/target/linux/adm5120/patches-2.6.37/101-cfi_fixup_macronix_bootloc.patch
deleted file mode 100644 (file)
index 6c46608..0000000
+++ /dev/null
@@ -1,84 +0,0 @@
---- a/drivers/mtd/chips/cfi_cmdset_0002.c
-+++ b/drivers/mtd/chips/cfi_cmdset_0002.c
-@@ -48,6 +48,12 @@
- #define SST49LF008A           0x005a
- #define AT49BV6416            0x00d6
-+/* Macronix */
-+#define MX29LV160B    0x2249  /* MX29LV160 Bottom-boot chip */
-+#define MX29LV160T    0x22C4  /* MX29LV160 Top-boot chip */
-+#define MX29LV320B    0x22A8  /* MX29LV320 Bottom-boot chip */
-+#define MX29LV320T    0x22A7  /* MX29LV320 Top-boot chip */
-+
- static int cfi_amdstd_read (struct mtd_info *, loff_t, size_t, size_t *, u_char *);
- static int cfi_amdstd_write_words(struct mtd_info *, loff_t, size_t, size_t *, const u_char *);
- static int cfi_amdstd_write_buffers(struct mtd_info *, loff_t, size_t, size_t *, const u_char *);
-@@ -345,6 +351,41 @@ static struct cfi_fixup cfi_nopri_fixup_
-       { 0, 0, NULL, NULL }
- };
-+#ifdef CONFIG_MTD_CFI_FIXUP_MACRONIX_BOOTLOC
-+/*
-+ * Some Macronix chips has no/bad bootblock information in the CFI table
-+ */
-+static void fixup_macronix_bootloc(struct mtd_info *mtd, void* param)
-+{
-+      struct map_info *map = mtd->priv;
-+      struct cfi_private *cfi = map->fldrv_priv;
-+      struct cfi_pri_amdstd *extp = cfi->cmdset_priv;
-+      __u8 t;
-+
-+      switch (cfi->id) {
-+      /* TODO: put affected chip ids here */
-+      case MX29LV160B:
-+      case MX29LV320B:
-+              t = 2;  /* Bottom boot */
-+              break;
-+      case MX29LV160T:
-+      case MX29LV320T:
-+              t = 3;  /* Top boot */
-+              break;
-+      default:
-+              return;
-+      }
-+
-+      if (extp->TopBottom == t)
-+              /* boot location detected by the CFI layer is correct */
-+              return;
-+
-+      extp->TopBottom = t;
-+      printk("%s: Macronix chip detected, id:0x%04X, boot location forced "
-+              "to %s\n", map->name, cfi->id, (t == 2) ? "bottom" : "top");
-+}
-+#endif /* CONFIG_MTD_CFI_FIXUP_MACRONIX_BOOTLOC */
-+
- static struct cfi_fixup cfi_fixup_table[] = {
-       { CFI_MFR_ATMEL, CFI_ID_ANY, fixup_convert_atmel_pri, NULL },
- #ifdef AMD_BOOTLOC_BUG
-@@ -385,6 +426,9 @@ static struct cfi_fixup fixup_table[] =
-        */
-       { CFI_MFR_ANY, CFI_ID_ANY, fixup_use_erase_chip, NULL },
-       { CFI_MFR_ATMEL, AT49BV6416, fixup_use_atmel_lock, NULL },
-+#ifdef CONFIG_MTD_CFI_FIXUP_MACRONIX_BOOTLOC
-+      { CFI_MFR_MACRONIX, CFI_ID_ANY, fixup_macronix_bootloc, NULL, },
-+#endif
-       { 0, 0, NULL, NULL }
- };
---- a/drivers/mtd/chips/Kconfig
-+++ b/drivers/mtd/chips/Kconfig
-@@ -196,6 +196,14 @@ config MTD_CFI_AMDSTD
-         provides support for one of those command sets, used on chips
-         including the AMD Am29LV320.
-+config MTD_CFI_FIXUP_MACRONIX_BOOTLOC
-+      bool "Fix boot-block location for Macronix flash chips"
-+      depends on MTD_CFI_AMDSTD
-+      help
-+        Some Macronix flash chips have no/wrong boot-block location in the
-+        CFI table, and the driver may detect the type incorrectly. Select
-+        this if your board has such chip.
-+
- config MTD_CFI_STAA
-       tristate "Support for ST (Advanced Architecture) flash chips"
-       depends on MTD_GEN_PROBE
diff --git a/target/linux/adm5120/patches-2.6.37/102-jedec_pmc_39lvxxx_chips.patch b/target/linux/adm5120/patches-2.6.37/102-jedec_pmc_39lvxxx_chips.patch
deleted file mode 100644 (file)
index 00148fa..0000000
+++ /dev/null
@@ -1,68 +0,0 @@
---- a/drivers/mtd/chips/jedec_probe.c
-+++ b/drivers/mtd/chips/jedec_probe.c
-@@ -115,6 +115,10 @@
- #define UPD29F064115  0x221C
- /* PMC */
-+#define PM39LV512     0x001B
-+#define PM39LV010     0x001C
-+#define PM39LV020     0x003D
-+#define PM39LV040     0x003E
- #define PM49FL002     0x006D
- #define PM49FL004     0x006E
- #define PM49FL008     0x006A
-@@ -1259,6 +1263,54 @@ static const struct amd_flash_info jedec
-                       ERASEINFO(0x02000,2),
-                       ERASEINFO(0x04000,1),
-               }
-+        }, {
-+              .mfr_id         = CFI_MFR_PMC,
-+              .dev_id         = PM39LV512,
-+              .name           = "PMC Pm39LV512",
-+              .devtypes       = CFI_DEVICETYPE_X8,
-+              .uaddr          = MTD_UADDR_0x0555_0x02AA,
-+              .dev_size       = SIZE_64KiB,
-+              .cmd_set        = P_ID_AMD_STD,
-+              .nr_regions     = 1,
-+              .regions        = {
-+                      ERASEINFO(0x01000,16),
-+              }
-+        }, {
-+              .mfr_id         = CFI_MFR_PMC,
-+              .dev_id         = PM39LV010,
-+              .name           = "PMC Pm39LV010",
-+              .devtypes       = CFI_DEVICETYPE_X8,
-+              .uaddr          = MTD_UADDR_0x0555_0x02AA,
-+              .dev_size       = SIZE_128KiB,
-+              .cmd_set        = P_ID_AMD_STD,
-+              .nr_regions     = 1,
-+              .regions        = {
-+                      ERASEINFO(0x01000,32),
-+              }
-+        }, {
-+              .mfr_id         = CFI_MFR_PMC,
-+              .dev_id         = PM39LV020,
-+              .name           = "PMC Pm39LV020",
-+              .devtypes       = CFI_DEVICETYPE_X8,
-+              .uaddr          = MTD_UADDR_0x0555_0x02AA,
-+              .dev_size       = SIZE_256KiB,
-+              .cmd_set        = P_ID_AMD_STD,
-+              .nr_regions     = 1,
-+              .regions        = {
-+                      ERASEINFO(0x01000,64),
-+              }
-+        }, {
-+              .mfr_id         = CFI_MFR_PMC,
-+              .dev_id         = PM39LV040,
-+              .name           = "PMC Pm39LV040",
-+              .devtypes       = CFI_DEVICETYPE_X8,
-+              .uaddr          = MTD_UADDR_0x0555_0x02AA,
-+              .dev_size       = SIZE_512KiB,
-+              .cmd_set        = P_ID_AMD_STD,
-+              .nr_regions     = 1,
-+              .regions        = {
-+                      ERASEINFO(0x01000,128),
-+              }
-       }, {
-               .mfr_id         = CFI_MFR_PMC,
-               .dev_id         = PM49FL002,
diff --git a/target/linux/adm5120/patches-2.6.37/103-mtd_trxsplit.patch b/target/linux/adm5120/patches-2.6.37/103-mtd_trxsplit.patch
deleted file mode 100644 (file)
index ec4f6c5..0000000
+++ /dev/null
@@ -1,24 +0,0 @@
---- a/drivers/mtd/Kconfig
-+++ b/drivers/mtd/Kconfig
-@@ -63,6 +63,11 @@ config MTD_ROOTFS_SPLIT
-       depends on MTD_PARTITIONS
-       default y
-+config MTD_TRXSPLIT
-+      bool "Automatically find and split TRX partitions"
-+      depends on MTD_PARTITIONS
-+      default n
-+
- config MTD_REDBOOT_PARTS
-       tristate "RedBoot partition table parsing"
-       depends on MTD_PARTITIONS
---- a/drivers/mtd/Makefile
-+++ b/drivers/mtd/Makefile
-@@ -8,6 +8,7 @@ mtd-y                          := mtdcore.o mtdsuper.o
- mtd-$(CONFIG_MTD_PARTITIONS)  += mtdpart.o
- obj-$(CONFIG_MTD_CONCAT)      += mtdconcat.o
-+obj-$(CONFIG_MTD_TRXSPLIT)    += trxsplit.o
- obj-$(CONFIG_MTD_REDBOOT_PARTS) += redboot.o
- obj-$(CONFIG_MTD_CMDLINE_PARTS) += cmdlinepart.o
- obj-$(CONFIG_MTD_AFS_PARTS)   += afs.o
diff --git a/target/linux/adm5120/patches-2.6.37/120-rb153_cf_driver.patch b/target/linux/adm5120/patches-2.6.37/120-rb153_cf_driver.patch
deleted file mode 100644 (file)
index 49e9340..0000000
+++ /dev/null
@@ -1,28 +0,0 @@
---- a/drivers/ata/Makefile
-+++ b/drivers/ata/Makefile
-@@ -86,6 +86,7 @@ obj-$(CONFIG_PATA_PALMLD)    += pata_palmld
- obj-$(CONFIG_PATA_PLATFORM)   += pata_platform.o
- obj-$(CONFIG_PATA_OF_PLATFORM)        += pata_of_platform.o
- obj-$(CONFIG_PATA_QDI)                += pata_qdi.o
-+obj-$(CONFIG_PATA_RB153_CF)   += pata_rb153_cf.o
- obj-$(CONFIG_PATA_RB532)      += pata_rb532_cf.o
- obj-$(CONFIG_PATA_RZ1000)     += pata_rz1000.o
- obj-$(CONFIG_PATA_SAMSUNG_CF) += pata_samsung_cf.o
---- a/drivers/ata/Kconfig
-+++ b/drivers/ata/Kconfig
-@@ -798,6 +798,15 @@ config PATA_QDI
-       help
-         Support for QDI 6500 and 6580 PATA controllers on VESA local bus.
-+config PATA_RB153_CF
-+      tristate "RouterBOARD 153 Compact Flash support"
-+      depends on ADM5120_MACH_RB_153
-+      help
-+        This option enables support for a Compact Flash connected on
-+        the RouterBOARD 153.
-+
-+        If unsure, say N.
-+
- config PATA_RB532
-       tristate "RouterBoard 532 PATA CompactFlash support"
-       depends on MIKROTIK_RB532
diff --git a/target/linux/adm5120/patches-2.6.37/200-amba_pl010_hacks.patch b/target/linux/adm5120/patches-2.6.37/200-amba_pl010_hacks.patch
deleted file mode 100644 (file)
index ed494e2..0000000
+++ /dev/null
@@ -1,378 +0,0 @@
---- a/drivers/serial/amba-pl010.c
-+++ b/drivers/serial/amba-pl010.c
-@@ -51,11 +51,10 @@
- #include <asm/io.h>
--#define UART_NR               8
--
- #define SERIAL_AMBA_MAJOR     204
- #define SERIAL_AMBA_MINOR     16
--#define SERIAL_AMBA_NR                UART_NR
-+#define SERIAL_AMBA_NR                CONFIG_SERIAL_AMBA_PL010_NUMPORTS
-+#define SERIAL_AMBA_NAME      CONFIG_SERIAL_AMBA_PL010_PORTNAME
- #define AMBA_ISR_PASS_LIMIT   256
-@@ -81,9 +80,9 @@ static void pl010_stop_tx(struct uart_po
-       struct uart_amba_port *uap = (struct uart_amba_port *)port;
-       unsigned int cr;
--      cr = readb(uap->port.membase + UART010_CR);
-+      cr = __raw_readl(uap->port.membase + UART010_CR);
-       cr &= ~UART010_CR_TIE;
--      writel(cr, uap->port.membase + UART010_CR);
-+      __raw_writel(cr, uap->port.membase + UART010_CR);
- }
- static void pl010_start_tx(struct uart_port *port)
-@@ -91,9 +90,9 @@ static void pl010_start_tx(struct uart_p
-       struct uart_amba_port *uap = (struct uart_amba_port *)port;
-       unsigned int cr;
--      cr = readb(uap->port.membase + UART010_CR);
-+      cr = __raw_readl(uap->port.membase + UART010_CR);
-       cr |= UART010_CR_TIE;
--      writel(cr, uap->port.membase + UART010_CR);
-+      __raw_writel(cr, uap->port.membase + UART010_CR);
- }
- static void pl010_stop_rx(struct uart_port *port)
-@@ -101,9 +100,9 @@ static void pl010_stop_rx(struct uart_po
-       struct uart_amba_port *uap = (struct uart_amba_port *)port;
-       unsigned int cr;
--      cr = readb(uap->port.membase + UART010_CR);
-+      cr = __raw_readl(uap->port.membase + UART010_CR);
-       cr &= ~(UART010_CR_RIE | UART010_CR_RTIE);
--      writel(cr, uap->port.membase + UART010_CR);
-+      __raw_writel(cr, uap->port.membase + UART010_CR);
- }
- static void pl010_enable_ms(struct uart_port *port)
-@@ -111,9 +110,9 @@ static void pl010_enable_ms(struct uart_
-       struct uart_amba_port *uap = (struct uart_amba_port *)port;
-       unsigned int cr;
--      cr = readb(uap->port.membase + UART010_CR);
-+      cr = __raw_readl(uap->port.membase + UART010_CR);
-       cr |= UART010_CR_MSIE;
--      writel(cr, uap->port.membase + UART010_CR);
-+      __raw_writel(cr, uap->port.membase + UART010_CR);
- }
- static void pl010_rx_chars(struct uart_amba_port *uap)
-@@ -121,9 +120,9 @@ static void pl010_rx_chars(struct uart_a
-       struct tty_struct *tty = uap->port.state->port.tty;
-       unsigned int status, ch, flag, rsr, max_count = 256;
--      status = readb(uap->port.membase + UART01x_FR);
-+      status = __raw_readl(uap->port.membase + UART01x_FR);
-       while (UART_RX_DATA(status) && max_count--) {
--              ch = readb(uap->port.membase + UART01x_DR);
-+              ch = __raw_readl(uap->port.membase + UART01x_DR);
-               flag = TTY_NORMAL;
-               uap->port.icount.rx++;
-@@ -132,9 +131,9 @@ static void pl010_rx_chars(struct uart_a
-                * Note that the error handling code is
-                * out of the main execution path
-                */
--              rsr = readb(uap->port.membase + UART01x_RSR) | UART_DUMMY_RSR_RX;
-+              rsr = __raw_readl(uap->port.membase + UART01x_RSR) | UART_DUMMY_RSR_RX;
-               if (unlikely(rsr & UART01x_RSR_ANY)) {
--                      writel(0, uap->port.membase + UART01x_ECR);
-+                      __raw_writel(0, uap->port.membase + UART01x_ECR);
-                       if (rsr & UART01x_RSR_BE) {
-                               rsr &= ~(UART01x_RSR_FE | UART01x_RSR_PE);
-@@ -164,7 +163,7 @@ static void pl010_rx_chars(struct uart_a
-               uart_insert_char(&uap->port, rsr, UART01x_RSR_OE, ch, flag);
-       ignore_char:
--              status = readb(uap->port.membase + UART01x_FR);
-+              status = __raw_readl(uap->port.membase + UART01x_FR);
-       }
-       spin_unlock(&uap->port.lock);
-       tty_flip_buffer_push(tty);
-@@ -177,7 +176,7 @@ static void pl010_tx_chars(struct uart_a
-       int count;
-       if (uap->port.x_char) {
--              writel(uap->port.x_char, uap->port.membase + UART01x_DR);
-+              __raw_writel(uap->port.x_char, uap->port.membase + UART01x_DR);
-               uap->port.icount.tx++;
-               uap->port.x_char = 0;
-               return;
-@@ -189,7 +188,7 @@ static void pl010_tx_chars(struct uart_a
-       count = uap->port.fifosize >> 1;
-       do {
--              writel(xmit->buf[xmit->tail], uap->port.membase + UART01x_DR);
-+              __raw_writel(xmit->buf[xmit->tail], uap->port.membase + UART01x_DR);
-               xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
-               uap->port.icount.tx++;
-               if (uart_circ_empty(xmit))
-@@ -207,9 +206,9 @@ static void pl010_modem_status(struct ua
- {
-       unsigned int status, delta;
--      writel(0, uap->port.membase + UART010_ICR);
-+      __raw_writel(0, uap->port.membase + UART010_ICR);
--      status = readb(uap->port.membase + UART01x_FR) & UART01x_FR_MODEM_ANY;
-+      status = __raw_readl(uap->port.membase + UART01x_FR) & UART01x_FR_MODEM_ANY;
-       delta = status ^ uap->old_status;
-       uap->old_status = status;
-@@ -237,7 +236,7 @@ static irqreturn_t pl010_int(int irq, vo
-       spin_lock(&uap->port.lock);
--      status = readb(uap->port.membase + UART010_IIR);
-+      status = __raw_readl(uap->port.membase + UART010_IIR);
-       if (status) {
-               do {
-                       if (status & (UART010_IIR_RTIS | UART010_IIR_RIS))
-@@ -250,7 +249,7 @@ static irqreturn_t pl010_int(int irq, vo
-                       if (pass_counter-- == 0)
-                               break;
--                      status = readb(uap->port.membase + UART010_IIR);
-+                      status = __raw_readl(uap->port.membase + UART010_IIR);
-               } while (status & (UART010_IIR_RTIS | UART010_IIR_RIS |
-                                  UART010_IIR_TIS));
-               handled = 1;
-@@ -264,7 +263,7 @@ static irqreturn_t pl010_int(int irq, vo
- static unsigned int pl010_tx_empty(struct uart_port *port)
- {
-       struct uart_amba_port *uap = (struct uart_amba_port *)port;
--      unsigned int status = readb(uap->port.membase + UART01x_FR);
-+      unsigned int status = __raw_readl(uap->port.membase + UART01x_FR);
-       return status & UART01x_FR_BUSY ? 0 : TIOCSER_TEMT;
- }
-@@ -274,7 +273,7 @@ static unsigned int pl010_get_mctrl(stru
-       unsigned int result = 0;
-       unsigned int status;
--      status = readb(uap->port.membase + UART01x_FR);
-+      status = __raw_readl(uap->port.membase + UART01x_FR);
-       if (status & UART01x_FR_DCD)
-               result |= TIOCM_CAR;
-       if (status & UART01x_FR_DSR)
-@@ -300,12 +299,12 @@ static void pl010_break_ctl(struct uart_
-       unsigned int lcr_h;
-       spin_lock_irqsave(&uap->port.lock, flags);
--      lcr_h = readb(uap->port.membase + UART010_LCRH);
-+      lcr_h = __raw_readl(uap->port.membase + UART010_LCRH);
-       if (break_state == -1)
-               lcr_h |= UART01x_LCRH_BRK;
-       else
-               lcr_h &= ~UART01x_LCRH_BRK;
--      writel(lcr_h, uap->port.membase + UART010_LCRH);
-+      __raw_writel(lcr_h, uap->port.membase + UART010_LCRH);
-       spin_unlock_irqrestore(&uap->port.lock, flags);
- }
-@@ -333,12 +332,12 @@ static int pl010_startup(struct uart_por
-       /*
-        * initialise the old status of the modem signals
-        */
--      uap->old_status = readb(uap->port.membase + UART01x_FR) & UART01x_FR_MODEM_ANY;
-+      uap->old_status = __raw_readl(uap->port.membase + UART01x_FR) & UART01x_FR_MODEM_ANY;
-       /*
-        * Finally, enable interrupts
-        */
--      writel(UART01x_CR_UARTEN | UART010_CR_RIE | UART010_CR_RTIE,
-+      __raw_writel(UART01x_CR_UARTEN | UART010_CR_RIE | UART010_CR_RTIE,
-              uap->port.membase + UART010_CR);
-       return 0;
-@@ -361,10 +360,10 @@ static void pl010_shutdown(struct uart_p
-       /*
-        * disable all interrupts, disable the port
-        */
--      writel(0, uap->port.membase + UART010_CR);
-+      __raw_writel(0, uap->port.membase + UART010_CR);
-       /* disable break condition and fifos */
--      writel(readb(uap->port.membase + UART010_LCRH) &
-+      __raw_writel(__raw_readl(uap->port.membase + UART010_LCRH) &
-               ~(UART01x_LCRH_BRK | UART01x_LCRH_FEN),
-              uap->port.membase + UART010_LCRH);
-@@ -386,7 +385,7 @@ pl010_set_termios(struct uart_port *port
-       /*
-        * Ask the core to calculate the divisor for us.
-        */
--      baud = uart_get_baud_rate(port, termios, old, 0, uap->port.uartclk/16); 
-+      baud = uart_get_baud_rate(port, termios, old, 0, uap->port.uartclk/16);
-       quot = uart_get_divisor(port, baud);
-       switch (termios->c_cflag & CSIZE) {
-@@ -449,25 +448,25 @@ pl010_set_termios(struct uart_port *port
-               uap->port.ignore_status_mask |= UART_DUMMY_RSR_RX;
-       /* first, disable everything */
--      old_cr = readb(uap->port.membase + UART010_CR) & ~UART010_CR_MSIE;
-+      old_cr = __raw_readl(uap->port.membase + UART010_CR) & ~UART010_CR_MSIE;
-       if (UART_ENABLE_MS(port, termios->c_cflag))
-               old_cr |= UART010_CR_MSIE;
--      writel(0, uap->port.membase + UART010_CR);
-+      __raw_writel(0, uap->port.membase + UART010_CR);
-       /* Set baud rate */
-       quot -= 1;
--      writel((quot & 0xf00) >> 8, uap->port.membase + UART010_LCRM);
--      writel(quot & 0xff, uap->port.membase + UART010_LCRL);
-+      __raw_writel((quot & 0xf00) >> 8, uap->port.membase + UART010_LCRM);
-+      __raw_writel(quot & 0xff, uap->port.membase + UART010_LCRL);
-       /*
-        * ----------v----------v----------v----------v-----
-        * NOTE: MUST BE WRITTEN AFTER UARTLCR_M & UARTLCR_L
-        * ----------^----------^----------^----------^-----
-        */
--      writel(lcr_h, uap->port.membase + UART010_LCRH);
--      writel(old_cr, uap->port.membase + UART010_CR);
-+      __raw_writel(lcr_h, uap->port.membase + UART010_LCRH);
-+      __raw_writel(old_cr, uap->port.membase + UART010_CR);
-       spin_unlock_irqrestore(&uap->port.lock, flags);
- }
-@@ -549,7 +548,7 @@ static struct uart_ops amba_pl010_pops =
-       .verify_port    = pl010_verify_port,
- };
--static struct uart_amba_port *amba_ports[UART_NR];
-+static struct uart_amba_port *amba_ports[SERIAL_AMBA_NR];
- #ifdef CONFIG_SERIAL_AMBA_PL010_CONSOLE
-@@ -559,10 +558,10 @@ static void pl010_console_putchar(struct
-       unsigned int status;
-       do {
--              status = readb(uap->port.membase + UART01x_FR);
-+              status = __raw_readl(uap->port.membase + UART01x_FR);
-               barrier();
-       } while (!UART_TX_READY(status));
--      writel(ch, uap->port.membase + UART01x_DR);
-+      __raw_writel(ch, uap->port.membase + UART01x_DR);
- }
- static void
-@@ -576,8 +575,8 @@ pl010_console_write(struct console *co,
-       /*
-        *      First save the CR then disable the interrupts
-        */
--      old_cr = readb(uap->port.membase + UART010_CR);
--      writel(UART01x_CR_UARTEN, uap->port.membase + UART010_CR);
-+      old_cr = __raw_readl(uap->port.membase + UART010_CR);
-+      __raw_writel(UART01x_CR_UARTEN, uap->port.membase + UART010_CR);
-       uart_console_write(&uap->port, s, count, pl010_console_putchar);
-@@ -586,10 +585,10 @@ pl010_console_write(struct console *co,
-        *      and restore the TCR
-        */
-       do {
--              status = readb(uap->port.membase + UART01x_FR);
-+              status = __raw_readl(uap->port.membase + UART01x_FR);
-               barrier();
-       } while (status & UART01x_FR_BUSY);
--      writel(old_cr, uap->port.membase + UART010_CR);
-+      __raw_writel(old_cr, uap->port.membase + UART010_CR);
-       clk_disable(uap->clk);
- }
-@@ -598,9 +597,9 @@ static void __init
- pl010_console_get_options(struct uart_amba_port *uap, int *baud,
-                            int *parity, int *bits)
- {
--      if (readb(uap->port.membase + UART010_CR) & UART01x_CR_UARTEN) {
-+      if (__raw_readl(uap->port.membase + UART010_CR) & UART01x_CR_UARTEN) {
-               unsigned int lcr_h, quot;
--              lcr_h = readb(uap->port.membase + UART010_LCRH);
-+              lcr_h = __raw_readl(uap->port.membase + UART010_LCRH);
-               *parity = 'n';
-               if (lcr_h & UART01x_LCRH_PEN) {
-@@ -615,8 +614,8 @@ pl010_console_get_options(struct uart_am
-               else
-                       *bits = 8;
--              quot = readb(uap->port.membase + UART010_LCRL) |
--                     readb(uap->port.membase + UART010_LCRM) << 8;
-+              quot = __raw_readl(uap->port.membase + UART010_LCRL) |
-+                     __raw_readl(uap->port.membase + UART010_LCRM) << 8;
-               *baud = uap->port.uartclk / (16 * (quot + 1));
-       }
- }
-@@ -634,7 +633,7 @@ static int __init pl010_console_setup(st
-        * if so, search for the first available port that does have
-        * console support.
-        */
--      if (co->index >= UART_NR)
-+      if (co->index >= SERIAL_AMBA_NR)
-               co->index = 0;
-       uap = amba_ports[co->index];
-       if (!uap)
-@@ -652,7 +651,7 @@ static int __init pl010_console_setup(st
- static struct uart_driver amba_reg;
- static struct console amba_console = {
--      .name           = "ttyAM",
-+      .name           = SERIAL_AMBA_NAME,
-       .write          = pl010_console_write,
-       .device         = uart_console_device,
-       .setup          = pl010_console_setup,
-@@ -668,11 +667,11 @@ static struct console amba_console = {
- static struct uart_driver amba_reg = {
-       .owner                  = THIS_MODULE,
--      .driver_name            = "ttyAM",
--      .dev_name               = "ttyAM",
-+      .driver_name            = SERIAL_AMBA_NAME,
-+      .dev_name               = SERIAL_AMBA_NAME,
-       .major                  = SERIAL_AMBA_MAJOR,
-       .minor                  = SERIAL_AMBA_MINOR,
--      .nr                     = UART_NR,
-+      .nr                     = SERIAL_AMBA_NR,
-       .cons                   = AMBA_CONSOLE,
- };
---- a/drivers/serial/Kconfig
-+++ b/drivers/serial/Kconfig
-@@ -276,10 +276,25 @@ config SERIAL_AMBA_PL010
-       help
-         This selects the ARM(R) AMBA(R) PrimeCell PL010 UART.  If you have
-         an Integrator/AP or Integrator/PP2 platform, or if you have a
--        Cirrus Logic EP93xx CPU, say Y or M here.
-+        Cirrus Logic EP93xx CPU or an Infineon ADM5120 SOC, say Y or M here.
-         If unsure, say N.
-+config SERIAL_AMBA_PL010_NUMPORTS
-+      int "Maximum number of AMBA PL010 serial ports"
-+      depends on SERIAL_AMBA_PL010
-+      default "8"
-+      ---help---
-+        Set this to the number of serial ports you want the AMBA PL010 driver
-+        to support.
-+
-+config SERIAL_AMBA_PL010_PORTNAME
-+      string "Name of the AMBA PL010 serial ports"
-+      depends on SERIAL_AMBA_PL010
-+      default "ttyAM"
-+      ---help---
-+        ::: To be written :::
-+
- config SERIAL_AMBA_PL010_CONSOLE
-       bool "Support for console on AMBA serial port"
-       depends on SERIAL_AMBA_PL010=y
diff --git a/target/linux/adm5120/patches-2.6.37/201-amba_bus_hacks.patch b/target/linux/adm5120/patches-2.6.37/201-amba_bus_hacks.patch
deleted file mode 100644 (file)
index 9db3e55..0000000
+++ /dev/null
@@ -1,13 +0,0 @@
---- a/drivers/amba/bus.c
-+++ b/drivers/amba/bus.c
-@@ -18,6 +18,10 @@
- #include <asm/irq.h>
- #include <asm/sizes.h>
-+#ifndef NO_IRQ
-+#define NO_IRQ                (-1)
-+#endif
-+
- #define to_amba_device(d)     container_of(d, struct amba_device, dev)
- #define to_amba_driver(d)     container_of(d, struct amba_driver, drv)
diff --git a/target/linux/adm5120/patches-2.6.37/203-gpio_leds_brightness.patch b/target/linux/adm5120/patches-2.6.37/203-gpio_leds_brightness.patch
deleted file mode 100644 (file)
index ac3c516..0000000
+++ /dev/null
@@ -1,27 +0,0 @@
---- a/drivers/leds/leds-gpio.c
-+++ b/drivers/leds/leds-gpio.c
-@@ -52,13 +52,17 @@ static void gpio_led_set(struct led_clas
-               container_of(led_cdev, struct gpio_led_data, cdev);
-       int level;
--      if (value == LED_OFF)
--              level = 0;
--      else
--              level = 1;
--
--      if (led_dat->active_low)
--              level = !level;
-+      switch (value) {
-+      case LED_OFF:
-+              level = led_dat->active_low ? 1 : 0;
-+              break;
-+      case LED_FULL:
-+              level = led_dat->active_low ? 0 : 1;
-+              break;
-+      default:
-+              level = value;
-+              break;
-+      }
-       /* Setting GPIOs with I2C/etc requires a task context, and we don't
-        * seem to have a reliable way to know if we're already in one; so
diff --git a/target/linux/adm5120/patches-2.6.37/310-adm5120_wdt.patch b/target/linux/adm5120/patches-2.6.37/310-adm5120_wdt.patch
deleted file mode 100644 (file)
index 3a6cf5b..0000000
+++ /dev/null
@@ -1,31 +0,0 @@
---- a/drivers/watchdog/Kconfig
-+++ b/drivers/watchdog/Kconfig
-@@ -849,6 +849,18 @@ config RC32434_WDT
-         To compile this driver as a module, choose M here: the
-         module will be called rc32434_wdt.
-+config ADM5120_WDT
-+      tristate "Infineon ADM5120 SoC hardware watchdog"
-+      depends on WATCHDOG && ADM5120
-+      help
-+        This is a driver for hardware watchdog integrated in Infineon
-+        ADM5120 SoC. This watchdog simply watches your kernel to make sure
-+        it doesn't freeze, and if it does, it reboots your computer after a
-+        certain amount of time.
-+
-+        To compile this driver as a module, choose M here: the module will be
-+        called adm5120_wdt.
-+
- config INDYDOG
-       tristate "Indy/I2 Hardware Watchdog"
-       depends on SGI_HAS_INDYDOG
---- a/drivers/watchdog/Makefile
-+++ b/drivers/watchdog/Makefile
-@@ -111,6 +111,7 @@ obj-$(CONFIG_SBC_EPX_C3_WATCHDOG) += sbc
- obj-$(CONFIG_BCM47XX_WDT) += bcm47xx_wdt.o
- obj-$(CONFIG_BCM63XX_WDT) += bcm63xx_wdt.o
- obj-$(CONFIG_RC32434_WDT) += rc32434_wdt.o
-+obj-$(CONFIG_ADM5120_WDT) += adm5120_wdt.o
- obj-$(CONFIG_INDYDOG) += indydog.o
- obj-$(CONFIG_WDT_MTX1) += mtx-1_wdt.o
- obj-$(CONFIG_PNX833X_WDT) += pnx833x_wdt.o
diff --git a/target/linux/adm5120/patches-2.6.37/901-adm5120-usb-fix-compiler-warning.patch b/target/linux/adm5120/patches-2.6.37/901-adm5120-usb-fix-compiler-warning.patch
deleted file mode 100644 (file)
index 93149df..0000000
+++ /dev/null
@@ -1,11 +0,0 @@
---- a/drivers/usb/host/adm5120-dbg.c
-+++ b/drivers/usb/host/adm5120-dbg.c
-@@ -133,7 +133,7 @@ urb_print(struct admhcd *ahcd, struct ur
- #define admhc_dbg_sw(ahcd, next, size, format, arg...) \
-       do { \
--      if (next) { \
-+      if (next != NULL) { \
-               unsigned s_len; \
-               s_len = scnprintf(*next, *size, format, ## arg ); \
-               *size -= s_len; *next += s_len; \
diff --git a/target/linux/adm5120/patches-2.6.37/902-adm5120-usb-remove-dev-power-power_state.patch b/target/linux/adm5120/patches-2.6.37/902-adm5120-usb-remove-dev-power-power_state.patch
deleted file mode 100644 (file)
index 4fd0283..0000000
+++ /dev/null
@@ -1,11 +0,0 @@
---- a/drivers/usb/host/adm5120-dbg.c
-+++ b/drivers/usb/host/adm5120-dbg.c
-@@ -642,7 +642,7 @@ static ssize_t fill_registers_buffer(str
-               hcd->product_desc,
-               hcd_name);
--      if (bus->controller->power.power_state.event) {
-+      if (!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags)) {
-               size -= scnprintf(next, size,
-                       "SUSPENDED (no register access)\n");
-               goto done;
diff --git a/target/linux/adm5120/patches-2.6.37/903-adm5120-usb-use-the-admhcd-structure-directly-in-debugfs-files.patch b/target/linux/adm5120/patches-2.6.37/903-adm5120-usb-use-the-admhcd-structure-directly-in-debugfs-files.patch
deleted file mode 100644 (file)
index aa50f8c..0000000
+++ /dev/null
@@ -1,116 +0,0 @@
---- a/drivers/usb/host/adm5120-dbg.c
-+++ b/drivers/usb/host/adm5120-dbg.c
-@@ -419,7 +419,7 @@ static struct dentry *admhc_debug_root;
- struct debug_buffer {
-       ssize_t (*fill_func)(struct debug_buffer *);    /* fill method */
--      struct device *dev;
-+      struct admhcd *ahcd;
-       struct mutex mutex;     /* protect filling of buffer */
-       size_t count;           /* number of characters filled into buffer */
-       char *page;
-@@ -494,15 +494,11 @@ show_list(struct admhcd *ahcd, char *buf
- static ssize_t fill_async_buffer(struct debug_buffer *buf)
- {
--      struct usb_bus          *bus;
--      struct usb_hcd          *hcd;
-       struct admhcd           *ahcd;
-       size_t                  temp;
-       unsigned long           flags;
--      bus = dev_get_drvdata(buf->dev);
--      hcd = bus_to_hcd(bus);
--      ahcd = hcd_to_admhcd(hcd);
-+      ahcd = buf->ahcd;
-       spin_lock_irqsave(&ahcd->lock, flags);
-       temp = show_list(ahcd, buf->page, PAGE_SIZE, ahcd->ed_head);
-@@ -516,8 +512,6 @@ static ssize_t fill_async_buffer(struct
- static ssize_t fill_periodic_buffer(struct debug_buffer *buf)
- {
--      struct usb_bus          *bus;
--      struct usb_hcd          *hcd;
-       struct admhcd           *ahcd;
-       struct ed               **seen, *ed;
-       unsigned long           flags;
-@@ -529,9 +523,7 @@ static ssize_t fill_periodic_buffer(stru
-               return 0;
-       seen_count = 0;
--      bus = dev_get_drvdata(buf->dev);
--      hcd = bus_to_hcd(bus);
--      ahcd = hcd_to_admhcd(hcd);
-+      ahcd = buf->ahcd;
-       next = buf->page;
-       size = PAGE_SIZE;
-@@ -613,7 +605,6 @@ static ssize_t fill_periodic_buffer(stru
- static ssize_t fill_registers_buffer(struct debug_buffer *buf)
- {
--      struct usb_bus          *bus;
-       struct usb_hcd          *hcd;
-       struct admhcd           *ahcd;
-       struct admhcd_regs __iomem *regs;
-@@ -622,9 +613,8 @@ static ssize_t fill_registers_buffer(str
-       char                    *next;
-       u32                     rdata;
--      bus = dev_get_drvdata(buf->dev);
--      hcd = bus_to_hcd(bus);
--      ahcd = hcd_to_admhcd(hcd);
-+      ahcd = buf->ahcd;
-+      hcd = admhcd_to_hcd(ahcd);
-       regs = ahcd->regs;
-       next = buf->page;
-       size = PAGE_SIZE;
-@@ -689,7 +679,7 @@ done:
- }
--static struct debug_buffer *alloc_buffer(struct device *dev,
-+static struct debug_buffer *alloc_buffer(struct admhcd *ahcd,
-                               ssize_t (*fill_func)(struct debug_buffer *))
- {
-       struct debug_buffer *buf;
-@@ -697,7 +687,7 @@ static struct debug_buffer *alloc_buffer
-       buf = kzalloc(sizeof(struct debug_buffer), GFP_KERNEL);
-       if (buf) {
--              buf->dev = dev;
-+              buf->ahcd = ahcd;
-               buf->fill_func = fill_func;
-               mutex_init(&buf->mutex);
-       }
-@@ -790,26 +780,25 @@ static int debug_registers_open(struct i
- static inline void create_debug_files(struct admhcd *ahcd)
- {
-       struct usb_bus *bus = &admhcd_to_hcd(ahcd)->self;
--      struct device *dev = bus->dev;
-       ahcd->debug_dir = debugfs_create_dir(bus->bus_name, admhc_debug_root);
-       if (!ahcd->debug_dir)
-               goto dir_error;
-       ahcd->debug_async = debugfs_create_file("async", S_IRUGO,
--                                              ahcd->debug_dir, dev,
-+                                              ahcd->debug_dir, ahcd,
-                                               &debug_async_fops);
-       if (!ahcd->debug_async)
-               goto async_error;
-       ahcd->debug_periodic = debugfs_create_file("periodic", S_IRUGO,
--                                              ahcd->debug_dir, dev,
-+                                              ahcd->debug_dir, ahcd,
-                                               &debug_periodic_fops);
-       if (!ahcd->debug_periodic)
-               goto periodic_error;
-       ahcd->debug_registers = debugfs_create_file("registers", S_IRUGO,
--                                              ahcd->debug_dir, dev,
-+                                              ahcd->debug_dir, ahcd,
-                                               &debug_registers_fops);
-       if (!ahcd->debug_registers)
-               goto registers_error;
diff --git a/target/linux/adm5120/patches-2.6.37/906-adm5120sw-mc_count-fix.patch b/target/linux/adm5120/patches-2.6.37/906-adm5120sw-mc_count-fix.patch
deleted file mode 100644 (file)
index cb1b376..0000000
+++ /dev/null
@@ -1,11 +0,0 @@
---- a/drivers/net/adm5120sw.c
-+++ b/drivers/net/adm5120sw.c
-@@ -937,7 +937,7 @@ static void adm5120_if_set_multicast_lis
-               t |= (ports << CPUP_CONF_DUNP_SHIFT);
-       if (dev->flags & IFF_PROMISC || dev->flags & IFF_ALLMULTI ||
--                                      dev->mc_count)
-+                                      netdev_mc_count(dev))
-               /* enable multicast packets */
-               t &= ~(ports << CPUP_CONF_DMCP_SHIFT);
-       else
diff --git a/target/linux/adm5120/patches-2.6.37/930-2_6_36_ports.patch b/target/linux/adm5120/patches-2.6.37/930-2_6_36_ports.patch
deleted file mode 100644 (file)
index 1e51c47..0000000
+++ /dev/null
@@ -1,119 +0,0 @@
---- a/arch/mips/include/asm/war.h
-+++ b/arch/mips/include/asm/war.h
-@@ -9,7 +9,7 @@
- #ifndef _ASM_WAR_H
- #define _ASM_WAR_H
--#include <war.h>
-+#include <asm/mach-adm5120/war.h>
- /*
-  * Work around certain R4000 CPU errata (as implemented by GCC):
---- a/drivers/amba/bus.c
-+++ b/drivers/amba/bus.c
-@@ -16,7 +16,7 @@
- #include <linux/amba/bus.h>
- #include <asm/irq.h>
--#include <asm/sizes.h>
-+#include <asm/mach-adm5120/asm/sizes.h>
- #ifndef NO_IRQ
- #define NO_IRQ                (-1)
---- a/drivers/watchdog/adm5120_wdt.c
-+++ b/drivers/watchdog/adm5120_wdt.c
-@@ -167,7 +167,7 @@ static struct file_operations wdt_fops =
-       owner:          THIS_MODULE,
-       llseek:         no_llseek,
-       write:          wdt_write,
--      ioctl:          wdt_ioctl,
-+      unlocked_ioctl: wdt_ioctl,
-       open:           wdt_open,
-       release:        wdt_release,
- };
---- a/arch/mips/Kbuild.platforms
-+++ b/arch/mips/Kbuild.platforms
-@@ -1,5 +1,6 @@
- # All platforms listed in alphabetic order
-+platforms += adm5120
- platforms += alchemy
- platforms += ar7
- platforms += bcm47xx
---- a/drivers/net/adm5120sw.c
-+++ b/drivers/net/adm5120sw.c
-@@ -26,6 +26,7 @@
- #include <linux/platform_device.h>
- #include <linux/io.h>
- #include <linux/irq.h>
-+#include <asm/mach-adm5120/irq.h>
- #include <linux/netdevice.h>
- #include <linux/etherdevice.h>
---- a/arch/mips/adm5120/common/clock.c
-+++ b/arch/mips/adm5120/common/clock.c
-@@ -33,7 +33,7 @@ static struct clk uart_clk = {
- struct clk *clk_get(struct device *dev, const char *id)
- {
--      char *name = dev_name(dev);
-+      const char *name = dev_name(dev);
-       if (!strcmp(name, "apb:uart0") || !strcmp(name, "apb:uart1"))
-               return &uart_clk;
---- /dev/null
-+++ b/arch/mips/adm5120/Platform
-@@ -0,0 +1,53 @@
-+#
-+# Core Infineon/ADMtek ADM5120
-+#
-+platform-$(CONFIG_ADM5120) += adm5120/common/
-+
-+#
-+# OEM CELLVISION
-+#
-+platform-$(CONFIG_ADM5120_OEM_CELLVISION)     += adm5120/cellvision/
-+
-+#
-+# OEM COMPEX
-+#
-+platform-$(CONFIG_ADM5120_OEM_COMPEX)         += adm5120/compex/
-+
-+#
-+# OEM EDIMAX
-+#
-+platform-$(CONFIG_ADM5120_OEM_EDIMAX)         += adm5120/edimax/
-+
-+#
-+# OEM GENERIC
-+#
-+platform-$(CONFIG_ADM5120_OEM_GENERIC)                += adm5120/generic/
-+
-+#
-+# OEM INFINEON
-+#
-+platform-$(CONFIG_ADM5120_OEM_INFINEON)               += adm5120/infineon/
-+
-+#
-+# OEM MIKROTIK
-+#
-+platform-$(CONFIG_ADM5120_OEM_MIKROTIK)               += adm5120/mikrotik/
-+
-+#
-+# OEM MOTOROLA
-+#
-+platform-$(CONFIG_ADM5120_OEM_MOTOROLA)               += adm5120/motorola/
-+
-+#
-+# OEM OSBRIDGE
-+#
-+platform-$(CONFIG_ADM5120_OEM_OSBRIDGE)               += adm5120/osbridge/
-+
-+#
-+# OEM ZYXEL
-+#
-+platform-$(CONFIG_ADM5120_OEM_ZYXEL)          += adm5120/zyxel/
-+
-+cflags-$(CONFIG_ADM5120)                      += -I$(srctree)/arch/mips/include/asm/mach-adm5120
-+libs-$(CONFIG_ADM5120)                                += arch/mips/adm5120/prom/
-+load-$(CONFIG_ADM5120)                                += 0xffffffff80001000
diff --git a/target/linux/adm5120/router_be/config-2.6.35 b/target/linux/adm5120/router_be/config-2.6.35
deleted file mode 100644 (file)
index 2745756..0000000
+++ /dev/null
@@ -1,223 +0,0 @@
-CONFIG_32BIT=y
-# CONFIG_64BIT is not set
-CONFIG_ADM5120=y
-CONFIG_ADM5120_ENET=y
-CONFIG_ADM5120_MACH_5GXI=y
-CONFIG_ADM5120_MACH_P_334WT=y
-CONFIG_ADM5120_MACH_P_335=y
-# CONFIG_ADM5120_OEM_CELLVISION is not set
-# CONFIG_ADM5120_OEM_COMPEX is not set
-# CONFIG_ADM5120_OEM_EDIMAX is not set
-# CONFIG_ADM5120_OEM_INFINEON is not set
-# CONFIG_ADM5120_OEM_MIKROTIK is not set
-# CONFIG_ADM5120_OEM_MOTOROLA is not set
-CONFIG_ADM5120_OEM_OSBRIDGE=y
-CONFIG_ADM5120_OEM_ZYXEL=y
-CONFIG_ADM5120_SOC_BGA=y
-CONFIG_ADM5120_WDT=y
-# CONFIG_ALCHEMY_GPIO_INDIRECT is not set
-# CONFIG_AR7 is not set
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-CONFIG_ARCH_SUPPORTS_OPROFILE=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_ARM_AMBA=y
-# CONFIG_BCM47XX is not set
-# CONFIG_BCM63XX is not set
-CONFIG_BINFMT_MISC=m
-CONFIG_BITREVERSE=y
-# CONFIG_BRIDGE_IGMP_SNOOPING is not set
-# CONFIG_CAVIUM_OCTEON_REFERENCE_BOARD is not set
-# CONFIG_CAVIUM_OCTEON_SIMULATOR is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_CEVT_R4K=y
-CONFIG_CEVT_R4K_LIB=y
-CONFIG_CMDLINE="console=ttyS0,115200 rootfstype=squashfs,jffs2"
-CONFIG_CMDLINE_BOOL=y
-# CONFIG_CMDLINE_OVERRIDE is not set
-CONFIG_CPU_BIG_ENDIAN=y
-# CONFIG_CPU_CAVIUM_OCTEON is not set
-CONFIG_CPU_HAS_PREFETCH=y
-CONFIG_CPU_HAS_SYNC=y
-# CONFIG_CPU_LITTLE_ENDIAN is not set
-# CONFIG_CPU_LOONGSON2E is not set
-# CONFIG_CPU_LOONGSON2F is not set
-CONFIG_CPU_MIPS32=y
-CONFIG_CPU_MIPS32_R1=y
-# CONFIG_CPU_MIPS32_R2 is not set
-# CONFIG_CPU_MIPS64_R1 is not set
-# CONFIG_CPU_MIPS64_R2 is not set
-CONFIG_CPU_MIPSR1=y
-# CONFIG_CPU_NEVADA is not set
-# CONFIG_CPU_R10000 is not set
-# CONFIG_CPU_R3000 is not set
-# CONFIG_CPU_R4300 is not set
-# CONFIG_CPU_R4X00 is not set
-# CONFIG_CPU_R5000 is not set
-# CONFIG_CPU_R5432 is not set
-# CONFIG_CPU_R5500 is not set
-# CONFIG_CPU_R6000 is not set
-# CONFIG_CPU_R8000 is not set
-# CONFIG_CPU_RM7000 is not set
-# CONFIG_CPU_RM9000 is not set
-# CONFIG_CPU_SB1 is not set
-CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_HIGHMEM=y
-# CONFIG_CPU_TX39XX is not set
-# CONFIG_CPU_TX49XX is not set
-# CONFIG_CPU_VR41XX is not set
-CONFIG_CSRC_R4K=y
-CONFIG_CSRC_R4K_LIB=y
-CONFIG_DECOMPRESS_LZMA=y
-# CONFIG_DEFAULT_HYBLA is not set
-# CONFIG_DEFAULT_VENO is not set
-CONFIG_DEVPORT=y
-# CONFIG_DM9000 is not set
-CONFIG_DMA_NONCOHERENT=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_ELF_CORE=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_FS_POSIX_ACL=y
-CONFIG_GENERIC_ACL=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_GPIOLIB=y
-# CONFIG_GPIO_PL061 is not set
-CONFIG_GPIO_SYSFS=y
-# CONFIG_HAMRADIO is not set
-CONFIG_HARDWARE_WATCHPOINTS=y
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAVE_ARCH_KGDB=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_HAVE_IDE=y
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HID=m
-CONFIG_HID_SUPPORT=y
-CONFIG_HW_HAS_PCI=y
-CONFIG_HW_RANDOM=y
-CONFIG_HZ=250
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_IMAGE_CMDLINE_HACK=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-CONFIG_INPUT=m
-# CONFIG_INPUT_GPIO_BUTTONS is not set
-CONFIG_IRQ_CPU=y
-CONFIG_LEDS_GPIO=m
-CONFIG_LEDS_TRIGGER_ADM5120_SWITCH=m
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-CONFIG_LOONGSON_UART_BASE=y
-# CONFIG_MACH_ALCHEMY is not set
-# CONFIG_MACH_DECSTATION is not set
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_MACH_LOONGSON is not set
-# CONFIG_MACH_TX39XX is not set
-# CONFIG_MACH_TX49XX is not set
-# CONFIG_MACH_VR41XX is not set
-CONFIG_MII=m
-# CONFIG_MIKROTIK_RB532 is not set
-CONFIG_MIPS=y
-# CONFIG_MIPS_COBALT is not set
-CONFIG_MIPS_L1_CACHE_SHIFT=5
-CONFIG_MIPS_MACHINE=y
-# CONFIG_MIPS_MALTA is not set
-CONFIG_MIPS_MT_DISABLED=y
-# CONFIG_MIPS_MT_SMP is not set
-# CONFIG_MIPS_MT_SMTC is not set
-# CONFIG_MIPS_SIM is not set
-CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_MTD_ADM5120=y
-CONFIG_MTD_BLOCK2MTD=y
-CONFIG_MTD_CFI_FIXUP_MACRONIX_BOOTLOC=y
-# CONFIG_MTD_CFI_INTELEXT is not set
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_TRXSPLIT=y
-CONFIG_NEED_DMA_MAP_STATE=y
-# CONFIG_NET_PCI is not set
-CONFIG_NLS=m
-CONFIG_NO_HZ=y
-# CONFIG_NO_IOPORT is not set
-# CONFIG_NXP_STB220 is not set
-# CONFIG_NXP_STB225 is not set
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_PCI=y
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_PCI_DISABLE_COMMON_QUIRKS=y
-CONFIG_PCI_DOMAINS=y
-# CONFIG_PMC_MSP is not set
-# CONFIG_PMC_YOSEMITE is not set
-# CONFIG_PNX8550_JBS is not set
-# CONFIG_PNX8550_STB810 is not set
-# CONFIG_POWERTV is not set
-CONFIG_SCHED_OMIT_FRAME_POINTER=y
-# CONFIG_SCSI_DMA is not set
-CONFIG_SCSI_MOD=y
-# CONFIG_SERIAL_8250 is not set
-CONFIG_SERIAL_AMBA_PL010=y
-CONFIG_SERIAL_AMBA_PL010_CONSOLE=y
-CONFIG_SERIAL_AMBA_PL010_NUMPORTS=2
-CONFIG_SERIAL_AMBA_PL010_PORTNAME="ttyS"
-# CONFIG_SERIAL_AMBA_PL011 is not set
-CONFIG_SERIO=y
-# CONFIG_SERIO_AMBAKMI is not set
-# CONFIG_SERIO_I8042 is not set
-# CONFIG_SERIO_LIBPS2 is not set
-# CONFIG_SERIO_PCIPS2 is not set
-# CONFIG_SERIO_RAW is not set
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SGI_IP22 is not set
-# CONFIG_SGI_IP27 is not set
-# CONFIG_SGI_IP28 is not set
-# CONFIG_SGI_IP32 is not set
-# CONFIG_SIBYTE_BIGSUR is not set
-# CONFIG_SIBYTE_CARMEL is not set
-# CONFIG_SIBYTE_CRHINE is not set
-# CONFIG_SIBYTE_CRHONE is not set
-# CONFIG_SIBYTE_LITTLESUR is not set
-# CONFIG_SIBYTE_RHONE is not set
-# CONFIG_SIBYTE_SENTOSA is not set
-# CONFIG_SIBYTE_SWARM is not set
-CONFIG_SOFT_WATCHDOG=m
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SWAP is not set
-CONFIG_SWAP_IO_SPACE=y
-CONFIG_SYS_HAS_CPU_MIPS32_R1=y
-CONFIG_SYS_HAS_EARLY_PRINTK=y
-CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
-CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
-CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
-CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
-CONFIG_TMPFS_POSIX_ACL=y
-CONFIG_TRAD_SIGNALS=y
-CONFIG_USB=m
-CONFIG_USB_ADM5120_HCD=m
-CONFIG_USB_DEBUG=y
-CONFIG_USB_EHCI_HCD=m
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_HCD=m
-CONFIG_USB_SUPPORT=y
-# CONFIG_USB_UHCI_HCD is not set
-CONFIG_ZONE_DMA_FLAG=0
diff --git a/target/linux/adm5120/router_be/config-2.6.36 b/target/linux/adm5120/router_be/config-2.6.36
deleted file mode 100644 (file)
index ca9065c..0000000
+++ /dev/null
@@ -1,273 +0,0 @@
-CONFIG_32BIT=y
-CONFIG_ADM5120=y
-CONFIG_ADM5120_ENET=y
-CONFIG_ADM5120_MACH_5GXI=y
-CONFIG_ADM5120_MACH_BR_6104K=y
-CONFIG_ADM5120_MACH_BR_6104KP=y
-CONFIG_ADM5120_MACH_BR_61X4WG=y
-CONFIG_ADM5120_MACH_CAS_771=y
-CONFIG_ADM5120_MACH_EASY5120P_ATA=y
-CONFIG_ADM5120_MACH_EASY5120_RT=y
-CONFIG_ADM5120_MACH_EASY5120_WVOIP=y
-CONFIG_ADM5120_MACH_EASY83000=y
-CONFIG_ADM5120_MACH_EB_214A=y
-CONFIG_ADM5120_MACH_NFS_101=y
-CONFIG_ADM5120_MACH_NP27G=y
-CONFIG_ADM5120_MACH_NP28G=y
-CONFIG_ADM5120_MACH_PMUGW=y
-CONFIG_ADM5120_MACH_RB_11X=y
-CONFIG_ADM5120_MACH_RB_133=y
-CONFIG_ADM5120_MACH_RB_133C=y
-CONFIG_ADM5120_MACH_RB_150=y
-CONFIG_ADM5120_MACH_RB_153=y
-CONFIG_ADM5120_MACH_RB_192=y
-CONFIG_ADM5120_MACH_WP54=y
-CONFIG_ADM5120_OEM_CELLVISION=y
-CONFIG_ADM5120_OEM_COMPEX=y
-CONFIG_ADM5120_OEM_EDIMAX=y
-CONFIG_ADM5120_OEM_GENERIC=y
-CONFIG_ADM5120_OEM_INFINEON=y
-CONFIG_ADM5120_OEM_MIKROTIK=y
-CONFIG_ADM5120_OEM_MOTOROLA=y
-CONFIG_ADM5120_OEM_OSBRIDGE=y
-# CONFIG_ADM5120_OEM_ZYXEL is not set
-CONFIG_ADM5120_SOC_BGA=y
-CONFIG_ADM5120_WDT=y
-# CONFIG_ALCHEMY_GPIO_INDIRECT is not set
-# CONFIG_AR7 is not set
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-CONFIG_ARCH_SUPPORTS_OPROFILE=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_ARM_AMBA=y
-# CONFIG_ARM_SP805_WATCHDOG is not set
-CONFIG_ATA=m
-# CONFIG_BCM47XX is not set
-# CONFIG_BCM63XX is not set
-CONFIG_BITREVERSE=y
-# CONFIG_CAVIUM_OCTEON_REFERENCE_BOARD is not set
-# CONFIG_CAVIUM_OCTEON_SIMULATOR is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_CEVT_R4K=y
-CONFIG_CEVT_R4K_LIB=y
-CONFIG_CMDLINE="console=ttyS0,115200 rootfstype=squashfs,yaffs2,jffs2"
-CONFIG_CMDLINE_BOOL=y
-# CONFIG_CMDLINE_OVERRIDE is not set
-# CONFIG_CPU_BIG_ENDIAN is not set
-CONFIG_CPU_HAS_PREFETCH=y
-CONFIG_CPU_HAS_SYNC=y
-CONFIG_CPU_LITTLE_ENDIAN=y
-CONFIG_CPU_MIPS32=y
-CONFIG_CPU_MIPS32_R1=y
-CONFIG_CPU_MIPSR1=y
-CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_HIGHMEM=y
-CONFIG_CRYPTO=m
-CONFIG_CRYPTO_AEAD2=m
-CONFIG_CRYPTO_AES=m
-CONFIG_CRYPTO_ALGAPI=m
-CONFIG_CRYPTO_ALGAPI2=m
-CONFIG_CRYPTO_ARC4=m
-CONFIG_CRYPTO_BLKCIPHER=m
-CONFIG_CRYPTO_BLKCIPHER2=m
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_HASH=m
-CONFIG_CRYPTO_HASH2=m
-CONFIG_CRYPTO_MANAGER=m
-CONFIG_CRYPTO_MANAGER2=m
-CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_PCOMP2=m
-CONFIG_CRYPTO_RNG2=m
-CONFIG_CRYPTO_WORKQUEUE=m
-CONFIG_CSRC_R4K=y
-CONFIG_CSRC_R4K_LIB=y
-CONFIG_DECOMPRESS_LZMA=y
-CONFIG_DEVPORT=y
-# CONFIG_DM9000 is not set
-CONFIG_DMA_NONCOHERENT=y
-CONFIG_EARLY_PRINTK=y
-# CONFIG_FANOTIFY is not set
-# CONFIG_FIREWIRE_NOSY is not set
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_GPIOLIB=y
-# CONFIG_GPIO_PL061 is not set
-CONFIG_GPIO_SYSFS=y
-# CONFIG_HARDLOCKUP_DETECTOR is not set
-CONFIG_HARDWARE_WATCHPOINTS=y
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAVE_ARCH_KGDB=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_HAVE_IDE=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HID=m
-CONFIG_HID_SUPPORT=y
-CONFIG_HOSTAP=m
-CONFIG_HOSTAP_FIRMWARE=y
-# CONFIG_HOSTAP_FIRMWARE_NVRAM is not set
-CONFIG_HOSTAP_PCI=m
-CONFIG_HW_HAS_PCI=y
-CONFIG_HW_RANDOM=y
-CONFIG_HZ=250
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_IMAGE_CMDLINE_HACK=y
-CONFIG_INOTIFY_USER=y
-CONFIG_INPUT=m
-# CONFIG_INPUT_GPIO_BUTTONS is not set
-# CONFIG_IP_MROUTE_MULTIPLE_TABLES is not set
-CONFIG_IRQ_CPU=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-CONFIG_LIB80211=m
-CONFIG_LIB80211_CRYPT_CCMP=m
-CONFIG_LIB80211_CRYPT_TKIP=m
-CONFIG_LIB80211_CRYPT_WEP=m
-# CONFIG_LOONGSON_MC146818 is not set
-CONFIG_LOONGSON_UART_BASE=y
-# CONFIG_MACH_DECSTATION is not set
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_MACH_JZ4740 is not set
-# CONFIG_MACH_LOONGSON is not set
-# CONFIG_MACH_TX39XX is not set
-# CONFIG_MACH_TX49XX is not set
-# CONFIG_MACH_VR41XX is not set
-# CONFIG_MFD_SUPPORT is not set
-CONFIG_MII=m
-# CONFIG_MIKROTIK_RB532 is not set
-CONFIG_MIPS=y
-# CONFIG_MIPS_ALCHEMY is not set
-# CONFIG_MIPS_COBALT is not set
-CONFIG_MIPS_L1_CACHE_SHIFT=5
-CONFIG_MIPS_MACHINE=y
-# CONFIG_MIPS_MALTA is not set
-CONFIG_MIPS_MT_DISABLED=y
-# CONFIG_MIPS_SIM is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_MTD_ADM5120=y
-CONFIG_MTD_CFI_FIXUP_MACRONIX_BOOTLOC=y
-# CONFIG_MTD_CFI_INTELEXT is not set
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_MYLOADER_PARTS=y
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_ECC=y
-CONFIG_MTD_NAND_PLATFORM=y
-# CONFIG_MTD_SM_COMMON is not set
-CONFIG_MTD_TRXSPLIT=y
-CONFIG_NEED_DMA_MAP_STATE=y
-# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
-CONFIG_NLATTR=y
-CONFIG_NLS=m
-CONFIG_NLS_DEFAULT="iso8859-1"
-CONFIG_NO_HZ=y
-# CONFIG_NO_IOPORT is not set
-# CONFIG_NXP_STB220 is not set
-# CONFIG_NXP_STB225 is not set
-CONFIG_PAGEFLAGS_EXTENDED=y
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_PCI=y
-CONFIG_PCI_DISABLE_COMMON_QUIRKS=y
-CONFIG_PCI_DOMAINS=y
-# CONFIG_PMC_MSP is not set
-# CONFIG_PMC_YOSEMITE is not set
-# CONFIG_PNX8550_JBS is not set
-# CONFIG_PNX8550_STB810 is not set
-# CONFIG_POWERTV is not set
-CONFIG_SCHED_OMIT_FRAME_POINTER=y
-CONFIG_SCSI=m
-CONFIG_SCSI_DMA=y
-CONFIG_SCSI_MOD=m
-CONFIG_SCSI_WAIT_SCAN=m
-# CONFIG_SERIAL_8250 is not set
-CONFIG_SERIAL_AMBA_PL010=y
-CONFIG_SERIAL_AMBA_PL010_CONSOLE=y
-CONFIG_SERIAL_AMBA_PL010_NUMPORTS=2
-CONFIG_SERIAL_AMBA_PL010_PORTNAME="ttyS"
-# CONFIG_SERIAL_AMBA_PL011 is not set
-# CONFIG_SERIAL_MFD_HSU is not set
-CONFIG_SERIO=y
-# CONFIG_SERIO_AMBAKMI is not set
-# CONFIG_SERIO_I8042 is not set
-# CONFIG_SERIO_LIBPS2 is not set
-# CONFIG_SERIO_PCIPS2 is not set
-# CONFIG_SERIO_RAW is not set
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SGI_IP22 is not set
-# CONFIG_SGI_IP27 is not set
-# CONFIG_SGI_IP28 is not set
-# CONFIG_SGI_IP32 is not set
-# CONFIG_SIBYTE_BIGSUR is not set
-# CONFIG_SIBYTE_CARMEL is not set
-# CONFIG_SIBYTE_CRHINE is not set
-# CONFIG_SIBYTE_CRHONE is not set
-# CONFIG_SIBYTE_LITTLESUR is not set
-# CONFIG_SIBYTE_RHONE is not set
-# CONFIG_SIBYTE_SENTOSA is not set
-# CONFIG_SIBYTE_SWARM is not set
-CONFIG_SOFT_WATCHDOG=m
-CONFIG_SSB_POSSIBLE=y
-CONFIG_STACKTRACE_SUPPORT=y
-# CONFIG_SWAP is not set
-CONFIG_SYS_HAS_CPU_MIPS32_R1=y
-CONFIG_SYS_HAS_EARLY_PRINTK=y
-CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
-CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
-CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
-CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
-# CONFIG_TC35815 is not set
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_TRACING_SUPPORT=y
-CONFIG_TRAD_SIGNALS=y
-CONFIG_USB=m
-CONFIG_USB_ADM5120_HCD=m
-CONFIG_USB_ARCH_HAS_EHCI=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_EHCI_HCD=m
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_HCD=m
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-CONFIG_USB_SUPPORT=y
-# CONFIG_USB_UHCI_HCD is not set
-CONFIG_VIRT_TO_BUS=y
-CONFIG_YAFFS_9BYTE_TAGS=y
-# CONFIG_YAFFS_ALWAYS_CHECK_CHUNK_ERASED is not set
-CONFIG_YAFFS_AUTO_YAFFS2=y
-# CONFIG_YAFFS_DISABLE_BACKGROUND is not set
-# CONFIG_YAFFS_DISABLE_BLOCK_REFRESHING is not set
-CONFIG_YAFFS_DISABLE_TAGS_ECC=y
-# CONFIG_YAFFS_DISABLE_WIDE_TNODES is not set
-# CONFIG_YAFFS_EMPTY_LOST_AND_FOUND is not set
-CONFIG_YAFFS_FS=y
-CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y
-CONFIG_YAFFS_XATTR=y
-CONFIG_YAFFS_YAFFS1=y
-CONFIG_YAFFS_YAFFS2=y
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZONE_DMA_FLAG=0
-# CONFIG_ZRAM is not set
diff --git a/target/linux/adm5120/router_be/config-2.6.37 b/target/linux/adm5120/router_be/config-2.6.37
deleted file mode 100644 (file)
index ca9065c..0000000
+++ /dev/null
@@ -1,273 +0,0 @@
-CONFIG_32BIT=y
-CONFIG_ADM5120=y
-CONFIG_ADM5120_ENET=y
-CONFIG_ADM5120_MACH_5GXI=y
-CONFIG_ADM5120_MACH_BR_6104K=y
-CONFIG_ADM5120_MACH_BR_6104KP=y
-CONFIG_ADM5120_MACH_BR_61X4WG=y
-CONFIG_ADM5120_MACH_CAS_771=y
-CONFIG_ADM5120_MACH_EASY5120P_ATA=y
-CONFIG_ADM5120_MACH_EASY5120_RT=y
-CONFIG_ADM5120_MACH_EASY5120_WVOIP=y
-CONFIG_ADM5120_MACH_EASY83000=y
-CONFIG_ADM5120_MACH_EB_214A=y
-CONFIG_ADM5120_MACH_NFS_101=y
-CONFIG_ADM5120_MACH_NP27G=y
-CONFIG_ADM5120_MACH_NP28G=y
-CONFIG_ADM5120_MACH_PMUGW=y
-CONFIG_ADM5120_MACH_RB_11X=y
-CONFIG_ADM5120_MACH_RB_133=y
-CONFIG_ADM5120_MACH_RB_133C=y
-CONFIG_ADM5120_MACH_RB_150=y
-CONFIG_ADM5120_MACH_RB_153=y
-CONFIG_ADM5120_MACH_RB_192=y
-CONFIG_ADM5120_MACH_WP54=y
-CONFIG_ADM5120_OEM_CELLVISION=y
-CONFIG_ADM5120_OEM_COMPEX=y
-CONFIG_ADM5120_OEM_EDIMAX=y
-CONFIG_ADM5120_OEM_GENERIC=y
-CONFIG_ADM5120_OEM_INFINEON=y
-CONFIG_ADM5120_OEM_MIKROTIK=y
-CONFIG_ADM5120_OEM_MOTOROLA=y
-CONFIG_ADM5120_OEM_OSBRIDGE=y
-# CONFIG_ADM5120_OEM_ZYXEL is not set
-CONFIG_ADM5120_SOC_BGA=y
-CONFIG_ADM5120_WDT=y
-# CONFIG_ALCHEMY_GPIO_INDIRECT is not set
-# CONFIG_AR7 is not set
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-CONFIG_ARCH_SUPPORTS_OPROFILE=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_ARM_AMBA=y
-# CONFIG_ARM_SP805_WATCHDOG is not set
-CONFIG_ATA=m
-# CONFIG_BCM47XX is not set
-# CONFIG_BCM63XX is not set
-CONFIG_BITREVERSE=y
-# CONFIG_CAVIUM_OCTEON_REFERENCE_BOARD is not set
-# CONFIG_CAVIUM_OCTEON_SIMULATOR is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_CEVT_R4K=y
-CONFIG_CEVT_R4K_LIB=y
-CONFIG_CMDLINE="console=ttyS0,115200 rootfstype=squashfs,yaffs2,jffs2"
-CONFIG_CMDLINE_BOOL=y
-# CONFIG_CMDLINE_OVERRIDE is not set
-# CONFIG_CPU_BIG_ENDIAN is not set
-CONFIG_CPU_HAS_PREFETCH=y
-CONFIG_CPU_HAS_SYNC=y
-CONFIG_CPU_LITTLE_ENDIAN=y
-CONFIG_CPU_MIPS32=y
-CONFIG_CPU_MIPS32_R1=y
-CONFIG_CPU_MIPSR1=y
-CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_HIGHMEM=y
-CONFIG_CRYPTO=m
-CONFIG_CRYPTO_AEAD2=m
-CONFIG_CRYPTO_AES=m
-CONFIG_CRYPTO_ALGAPI=m
-CONFIG_CRYPTO_ALGAPI2=m
-CONFIG_CRYPTO_ARC4=m
-CONFIG_CRYPTO_BLKCIPHER=m
-CONFIG_CRYPTO_BLKCIPHER2=m
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_HASH=m
-CONFIG_CRYPTO_HASH2=m
-CONFIG_CRYPTO_MANAGER=m
-CONFIG_CRYPTO_MANAGER2=m
-CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_PCOMP2=m
-CONFIG_CRYPTO_RNG2=m
-CONFIG_CRYPTO_WORKQUEUE=m
-CONFIG_CSRC_R4K=y
-CONFIG_CSRC_R4K_LIB=y
-CONFIG_DECOMPRESS_LZMA=y
-CONFIG_DEVPORT=y
-# CONFIG_DM9000 is not set
-CONFIG_DMA_NONCOHERENT=y
-CONFIG_EARLY_PRINTK=y
-# CONFIG_FANOTIFY is not set
-# CONFIG_FIREWIRE_NOSY is not set
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_GPIOLIB=y
-# CONFIG_GPIO_PL061 is not set
-CONFIG_GPIO_SYSFS=y
-# CONFIG_HARDLOCKUP_DETECTOR is not set
-CONFIG_HARDWARE_WATCHPOINTS=y
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAVE_ARCH_KGDB=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_HAVE_IDE=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HID=m
-CONFIG_HID_SUPPORT=y
-CONFIG_HOSTAP=m
-CONFIG_HOSTAP_FIRMWARE=y
-# CONFIG_HOSTAP_FIRMWARE_NVRAM is not set
-CONFIG_HOSTAP_PCI=m
-CONFIG_HW_HAS_PCI=y
-CONFIG_HW_RANDOM=y
-CONFIG_HZ=250
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_IMAGE_CMDLINE_HACK=y
-CONFIG_INOTIFY_USER=y
-CONFIG_INPUT=m
-# CONFIG_INPUT_GPIO_BUTTONS is not set
-# CONFIG_IP_MROUTE_MULTIPLE_TABLES is not set
-CONFIG_IRQ_CPU=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-CONFIG_LIB80211=m
-CONFIG_LIB80211_CRYPT_CCMP=m
-CONFIG_LIB80211_CRYPT_TKIP=m
-CONFIG_LIB80211_CRYPT_WEP=m
-# CONFIG_LOONGSON_MC146818 is not set
-CONFIG_LOONGSON_UART_BASE=y
-# CONFIG_MACH_DECSTATION is not set
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_MACH_JZ4740 is not set
-# CONFIG_MACH_LOONGSON is not set
-# CONFIG_MACH_TX39XX is not set
-# CONFIG_MACH_TX49XX is not set
-# CONFIG_MACH_VR41XX is not set
-# CONFIG_MFD_SUPPORT is not set
-CONFIG_MII=m
-# CONFIG_MIKROTIK_RB532 is not set
-CONFIG_MIPS=y
-# CONFIG_MIPS_ALCHEMY is not set
-# CONFIG_MIPS_COBALT is not set
-CONFIG_MIPS_L1_CACHE_SHIFT=5
-CONFIG_MIPS_MACHINE=y
-# CONFIG_MIPS_MALTA is not set
-CONFIG_MIPS_MT_DISABLED=y
-# CONFIG_MIPS_SIM is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_MTD_ADM5120=y
-CONFIG_MTD_CFI_FIXUP_MACRONIX_BOOTLOC=y
-# CONFIG_MTD_CFI_INTELEXT is not set
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_MYLOADER_PARTS=y
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_ECC=y
-CONFIG_MTD_NAND_PLATFORM=y
-# CONFIG_MTD_SM_COMMON is not set
-CONFIG_MTD_TRXSPLIT=y
-CONFIG_NEED_DMA_MAP_STATE=y
-# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
-CONFIG_NLATTR=y
-CONFIG_NLS=m
-CONFIG_NLS_DEFAULT="iso8859-1"
-CONFIG_NO_HZ=y
-# CONFIG_NO_IOPORT is not set
-# CONFIG_NXP_STB220 is not set
-# CONFIG_NXP_STB225 is not set
-CONFIG_PAGEFLAGS_EXTENDED=y
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_PCI=y
-CONFIG_PCI_DISABLE_COMMON_QUIRKS=y
-CONFIG_PCI_DOMAINS=y
-# CONFIG_PMC_MSP is not set
-# CONFIG_PMC_YOSEMITE is not set
-# CONFIG_PNX8550_JBS is not set
-# CONFIG_PNX8550_STB810 is not set
-# CONFIG_POWERTV is not set
-CONFIG_SCHED_OMIT_FRAME_POINTER=y
-CONFIG_SCSI=m
-CONFIG_SCSI_DMA=y
-CONFIG_SCSI_MOD=m
-CONFIG_SCSI_WAIT_SCAN=m
-# CONFIG_SERIAL_8250 is not set
-CONFIG_SERIAL_AMBA_PL010=y
-CONFIG_SERIAL_AMBA_PL010_CONSOLE=y
-CONFIG_SERIAL_AMBA_PL010_NUMPORTS=2
-CONFIG_SERIAL_AMBA_PL010_PORTNAME="ttyS"
-# CONFIG_SERIAL_AMBA_PL011 is not set
-# CONFIG_SERIAL_MFD_HSU is not set
-CONFIG_SERIO=y
-# CONFIG_SERIO_AMBAKMI is not set
-# CONFIG_SERIO_I8042 is not set
-# CONFIG_SERIO_LIBPS2 is not set
-# CONFIG_SERIO_PCIPS2 is not set
-# CONFIG_SERIO_RAW is not set
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SGI_IP22 is not set
-# CONFIG_SGI_IP27 is not set
-# CONFIG_SGI_IP28 is not set
-# CONFIG_SGI_IP32 is not set
-# CONFIG_SIBYTE_BIGSUR is not set
-# CONFIG_SIBYTE_CARMEL is not set
-# CONFIG_SIBYTE_CRHINE is not set
-# CONFIG_SIBYTE_CRHONE is not set
-# CONFIG_SIBYTE_LITTLESUR is not set
-# CONFIG_SIBYTE_RHONE is not set
-# CONFIG_SIBYTE_SENTOSA is not set
-# CONFIG_SIBYTE_SWARM is not set
-CONFIG_SOFT_WATCHDOG=m
-CONFIG_SSB_POSSIBLE=y
-CONFIG_STACKTRACE_SUPPORT=y
-# CONFIG_SWAP is not set
-CONFIG_SYS_HAS_CPU_MIPS32_R1=y
-CONFIG_SYS_HAS_EARLY_PRINTK=y
-CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
-CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
-CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
-CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
-# CONFIG_TC35815 is not set
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_TRACING_SUPPORT=y
-CONFIG_TRAD_SIGNALS=y
-CONFIG_USB=m
-CONFIG_USB_ADM5120_HCD=m
-CONFIG_USB_ARCH_HAS_EHCI=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_EHCI_HCD=m
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_HCD=m
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-CONFIG_USB_SUPPORT=y
-# CONFIG_USB_UHCI_HCD is not set
-CONFIG_VIRT_TO_BUS=y
-CONFIG_YAFFS_9BYTE_TAGS=y
-# CONFIG_YAFFS_ALWAYS_CHECK_CHUNK_ERASED is not set
-CONFIG_YAFFS_AUTO_YAFFS2=y
-# CONFIG_YAFFS_DISABLE_BACKGROUND is not set
-# CONFIG_YAFFS_DISABLE_BLOCK_REFRESHING is not set
-CONFIG_YAFFS_DISABLE_TAGS_ECC=y
-# CONFIG_YAFFS_DISABLE_WIDE_TNODES is not set
-# CONFIG_YAFFS_EMPTY_LOST_AND_FOUND is not set
-CONFIG_YAFFS_FS=y
-CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y
-CONFIG_YAFFS_XATTR=y
-CONFIG_YAFFS_YAFFS1=y
-CONFIG_YAFFS_YAFFS2=y
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZONE_DMA_FLAG=0
-# CONFIG_ZRAM is not set
diff --git a/target/linux/adm5120/router_le/config-2.6.35 b/target/linux/adm5120/router_le/config-2.6.35
deleted file mode 100644 (file)
index 7d566c0..0000000
+++ /dev/null
@@ -1,282 +0,0 @@
-CONFIG_32BIT=y
-# CONFIG_64BIT is not set
-CONFIG_ADM5120=y
-CONFIG_ADM5120_ENET=y
-CONFIG_ADM5120_MACH_5GXI=y
-CONFIG_ADM5120_MACH_BR_6104K=y
-CONFIG_ADM5120_MACH_BR_6104KP=y
-CONFIG_ADM5120_MACH_BR_61X4WG=y
-CONFIG_ADM5120_MACH_CAS_771=y
-CONFIG_ADM5120_MACH_EASY5120P_ATA=y
-CONFIG_ADM5120_MACH_EASY5120_RT=y
-CONFIG_ADM5120_MACH_EASY5120_WVOIP=y
-CONFIG_ADM5120_MACH_EASY83000=y
-CONFIG_ADM5120_MACH_EB_214A=y
-CONFIG_ADM5120_MACH_NFS_101=y
-CONFIG_ADM5120_MACH_NP27G=y
-CONFIG_ADM5120_MACH_NP28G=y
-CONFIG_ADM5120_MACH_PMUGW=y
-CONFIG_ADM5120_MACH_RB_11X=y
-CONFIG_ADM5120_MACH_RB_133=y
-CONFIG_ADM5120_MACH_RB_133C=y
-CONFIG_ADM5120_MACH_RB_150=y
-CONFIG_ADM5120_MACH_RB_153=y
-CONFIG_ADM5120_MACH_RB_192=y
-CONFIG_ADM5120_MACH_WP54=y
-CONFIG_ADM5120_OEM_CELLVISION=y
-CONFIG_ADM5120_OEM_COMPEX=y
-CONFIG_ADM5120_OEM_EDIMAX=y
-CONFIG_ADM5120_OEM_GENERIC=y
-CONFIG_ADM5120_OEM_INFINEON=y
-CONFIG_ADM5120_OEM_MIKROTIK=y
-CONFIG_ADM5120_OEM_MOTOROLA=y
-CONFIG_ADM5120_OEM_OSBRIDGE=y
-# CONFIG_ADM5120_OEM_ZYXEL is not set
-CONFIG_ADM5120_SOC_BGA=y
-CONFIG_ADM5120_WDT=y
-# CONFIG_ALCHEMY_GPIO_INDIRECT is not set
-# CONFIG_AR7 is not set
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-CONFIG_ARCH_SUPPORTS_OPROFILE=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_ARM_AMBA=y
-CONFIG_ATA=m
-CONFIG_ATA_BMDMA=y
-# CONFIG_BCM47XX is not set
-# CONFIG_BCM63XX is not set
-CONFIG_BITREVERSE=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_BUG is not set
-# CONFIG_CAVIUM_OCTEON_REFERENCE_BOARD is not set
-# CONFIG_CAVIUM_OCTEON_SIMULATOR is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_CEVT_R4K=y
-CONFIG_CEVT_R4K_LIB=y
-CONFIG_CMDLINE="console=ttyS0,115200 rootfstype=squashfs,yaffs2,jffs2"
-CONFIG_CMDLINE_BOOL=y
-# CONFIG_CMDLINE_OVERRIDE is not set
-# CONFIG_CPU_BIG_ENDIAN is not set
-# CONFIG_CPU_CAVIUM_OCTEON is not set
-CONFIG_CPU_HAS_PREFETCH=y
-CONFIG_CPU_HAS_SYNC=y
-CONFIG_CPU_LITTLE_ENDIAN=y
-# CONFIG_CPU_LOONGSON2E is not set
-# CONFIG_CPU_LOONGSON2F is not set
-CONFIG_CPU_MIPS32=y
-CONFIG_CPU_MIPS32_R1=y
-# CONFIG_CPU_MIPS32_R2 is not set
-# CONFIG_CPU_MIPS64_R1 is not set
-# CONFIG_CPU_MIPS64_R2 is not set
-CONFIG_CPU_MIPSR1=y
-# CONFIG_CPU_NEVADA is not set
-# CONFIG_CPU_R10000 is not set
-# CONFIG_CPU_R3000 is not set
-# CONFIG_CPU_R4300 is not set
-# CONFIG_CPU_R4X00 is not set
-# CONFIG_CPU_R5000 is not set
-# CONFIG_CPU_R5432 is not set
-# CONFIG_CPU_R5500 is not set
-# CONFIG_CPU_R6000 is not set
-# CONFIG_CPU_R8000 is not set
-# CONFIG_CPU_RM7000 is not set
-# CONFIG_CPU_RM9000 is not set
-# CONFIG_CPU_SB1 is not set
-CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_HIGHMEM=y
-# CONFIG_CPU_TX39XX is not set
-# CONFIG_CPU_TX49XX is not set
-# CONFIG_CPU_VR41XX is not set
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_AES=m
-CONFIG_CRYPTO_ARC4=m
-CONFIG_CRYPTO_BLKCIPHER=m
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_HASH=m
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_MANAGER=m
-CONFIG_CRYPTO_MANAGER2=y
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_WORKQUEUE=y
-CONFIG_CSRC_R4K=y
-CONFIG_CSRC_R4K_LIB=y
-# CONFIG_DEBUG_FS is not set
-CONFIG_DECOMPRESS_LZMA=y
-# CONFIG_DEFAULT_HYBLA is not set
-# CONFIG_DEFAULT_VENO is not set
-CONFIG_DEVPORT=y
-# CONFIG_DM9000 is not set
-CONFIG_DMA_NONCOHERENT=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_FS_POSIX_ACL=y
-CONFIG_GENERIC_ACL=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_GPIOLIB=y
-# CONFIG_GPIO_PL061 is not set
-CONFIG_GPIO_SYSFS=y
-# CONFIG_HAMRADIO is not set
-CONFIG_HARDWARE_WATCHPOINTS=y
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAVE_ARCH_KGDB=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_HAVE_IDE=y
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HID=m
-CONFIG_HID_SUPPORT=y
-CONFIG_HOSTAP=m
-CONFIG_HOSTAP_FIRMWARE=y
-# CONFIG_HOSTAP_FIRMWARE_NVRAM is not set
-CONFIG_HOSTAP_PCI=m
-CONFIG_HW_HAS_PCI=y
-CONFIG_HW_RANDOM=y
-CONFIG_HZ=250
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_IMAGE_CMDLINE_HACK=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-CONFIG_INPUT=m
-# CONFIG_INPUT_GPIO_BUTTONS is not set
-# CONFIG_IP_MROUTE_MULTIPLE_TABLES is not set
-CONFIG_IRQ_CPU=y
-# CONFIG_ISDN is not set
-CONFIG_LEDS_GPIO=m
-CONFIG_LEDS_TRIGGER_ADM5120_SWITCH=m
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-CONFIG_LIB80211=m
-CONFIG_LIB80211_CRYPT_CCMP=m
-CONFIG_LIB80211_CRYPT_TKIP=m
-CONFIG_LIB80211_CRYPT_WEP=m
-CONFIG_LOONGSON_UART_BASE=y
-# CONFIG_MACH_ALCHEMY is not set
-# CONFIG_MACH_DECSTATION is not set
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_MACH_LOONGSON is not set
-# CONFIG_MACH_TX39XX is not set
-# CONFIG_MACH_TX49XX is not set
-# CONFIG_MACH_VR41XX is not set
-# CONFIG_MFD_SUPPORT is not set
-CONFIG_MII=m
-# CONFIG_MIKROTIK_RB532 is not set
-CONFIG_MIPS=y
-# CONFIG_MIPS_COBALT is not set
-CONFIG_MIPS_L1_CACHE_SHIFT=5
-CONFIG_MIPS_MACHINE=y
-# CONFIG_MIPS_MALTA is not set
-CONFIG_MIPS_MT_DISABLED=y
-# CONFIG_MIPS_MT_SMP is not set
-# CONFIG_MIPS_MT_SMTC is not set
-# CONFIG_MIPS_SIM is not set
-CONFIG_MTD_ADM5120=y
-CONFIG_MTD_CFI_FIXUP_MACRONIX_BOOTLOC=y
-# CONFIG_MTD_CFI_INTELEXT is not set
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_MYLOADER_PARTS=y
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_DENALI_SCRATCH_REG_ADDR=0xFF108018
-CONFIG_MTD_NAND_ECC=y
-CONFIG_MTD_NAND_PLATFORM=y
-# CONFIG_MTD_SM_COMMON is not set
-CONFIG_MTD_TRXSPLIT=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_NLS=m
-CONFIG_NO_HZ=y
-# CONFIG_NO_IOPORT is not set
-# CONFIG_NXP_STB220 is not set
-# CONFIG_NXP_STB225 is not set
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_PCI=y
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_PATA_RB153_CF=m
-CONFIG_PCI_DISABLE_COMMON_QUIRKS=y
-CONFIG_PCI_DOMAINS=y
-# CONFIG_PMC_MSP is not set
-# CONFIG_PMC_YOSEMITE is not set
-# CONFIG_PNX8550_JBS is not set
-# CONFIG_PNX8550_STB810 is not set
-# CONFIG_POWERTV is not set
-# CONFIG_SATA_AHCI_PLATFORM is not set
-CONFIG_SCHED_OMIT_FRAME_POINTER=y
-CONFIG_SCSI=m
-CONFIG_SCSI_MOD=m
-# CONFIG_SERIAL_8250 is not set
-CONFIG_SERIAL_AMBA_PL010=y
-CONFIG_SERIAL_AMBA_PL010_CONSOLE=y
-CONFIG_SERIAL_AMBA_PL010_NUMPORTS=2
-CONFIG_SERIAL_AMBA_PL010_PORTNAME="ttyS"
-# CONFIG_SERIAL_AMBA_PL011 is not set
-CONFIG_SERIO=y
-# CONFIG_SERIO_AMBAKMI is not set
-# CONFIG_SERIO_I8042 is not set
-# CONFIG_SERIO_LIBPS2 is not set
-# CONFIG_SERIO_PCIPS2 is not set
-# CONFIG_SERIO_RAW is not set
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SGI_IP22 is not set
-# CONFIG_SGI_IP27 is not set
-# CONFIG_SGI_IP28 is not set
-# CONFIG_SGI_IP32 is not set
-# CONFIG_SIBYTE_BIGSUR is not set
-# CONFIG_SIBYTE_CARMEL is not set
-# CONFIG_SIBYTE_CRHINE is not set
-# CONFIG_SIBYTE_CRHONE is not set
-# CONFIG_SIBYTE_LITTLESUR is not set
-# CONFIG_SIBYTE_RHONE is not set
-# CONFIG_SIBYTE_SENTOSA is not set
-# CONFIG_SIBYTE_SWARM is not set
-CONFIG_SOFT_WATCHDOG=m
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SWAP is not set
-CONFIG_SYS_HAS_CPU_MIPS32_R1=y
-CONFIG_SYS_HAS_EARLY_PRINTK=y
-CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
-CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
-CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
-CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
-# CONFIG_TC35815 is not set
-CONFIG_TMPFS_POSIX_ACL=y
-CONFIG_TRAD_SIGNALS=y
-CONFIG_USB=m
-CONFIG_USB_ADM5120_HCD=m
-CONFIG_USB_EHCI_HCD=m
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_HCD=m
-CONFIG_USB_SUPPORT=y
-# CONFIG_USB_UHCI_HCD is not set
-CONFIG_YAFFS_9BYTE_TAGS=y
-# CONFIG_YAFFS_ALWAYS_CHECK_CHUNK_ERASED is not set
-CONFIG_YAFFS_AUTO_YAFFS2=y
-# CONFIG_YAFFS_DISABLE_LAZY_LOAD is not set
-# CONFIG_YAFFS_DISABLE_WIDE_TNODES is not set
-CONFIG_YAFFS_FS=y
-CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y
-CONFIG_YAFFS_YAFFS1=y
-CONFIG_YAFFS_YAFFS2=y
-CONFIG_ZONE_DMA_FLAG=0
diff --git a/target/linux/adm5120/router_le/config-2.6.36 b/target/linux/adm5120/router_le/config-2.6.36
deleted file mode 100644 (file)
index ca9065c..0000000
+++ /dev/null
@@ -1,273 +0,0 @@
-CONFIG_32BIT=y
-CONFIG_ADM5120=y
-CONFIG_ADM5120_ENET=y
-CONFIG_ADM5120_MACH_5GXI=y
-CONFIG_ADM5120_MACH_BR_6104K=y
-CONFIG_ADM5120_MACH_BR_6104KP=y
-CONFIG_ADM5120_MACH_BR_61X4WG=y
-CONFIG_ADM5120_MACH_CAS_771=y
-CONFIG_ADM5120_MACH_EASY5120P_ATA=y
-CONFIG_ADM5120_MACH_EASY5120_RT=y
-CONFIG_ADM5120_MACH_EASY5120_WVOIP=y
-CONFIG_ADM5120_MACH_EASY83000=y
-CONFIG_ADM5120_MACH_EB_214A=y
-CONFIG_ADM5120_MACH_NFS_101=y
-CONFIG_ADM5120_MACH_NP27G=y
-CONFIG_ADM5120_MACH_NP28G=y
-CONFIG_ADM5120_MACH_PMUGW=y
-CONFIG_ADM5120_MACH_RB_11X=y
-CONFIG_ADM5120_MACH_RB_133=y
-CONFIG_ADM5120_MACH_RB_133C=y
-CONFIG_ADM5120_MACH_RB_150=y
-CONFIG_ADM5120_MACH_RB_153=y
-CONFIG_ADM5120_MACH_RB_192=y
-CONFIG_ADM5120_MACH_WP54=y
-CONFIG_ADM5120_OEM_CELLVISION=y
-CONFIG_ADM5120_OEM_COMPEX=y
-CONFIG_ADM5120_OEM_EDIMAX=y
-CONFIG_ADM5120_OEM_GENERIC=y
-CONFIG_ADM5120_OEM_INFINEON=y
-CONFIG_ADM5120_OEM_MIKROTIK=y
-CONFIG_ADM5120_OEM_MOTOROLA=y
-CONFIG_ADM5120_OEM_OSBRIDGE=y
-# CONFIG_ADM5120_OEM_ZYXEL is not set
-CONFIG_ADM5120_SOC_BGA=y
-CONFIG_ADM5120_WDT=y
-# CONFIG_ALCHEMY_GPIO_INDIRECT is not set
-# CONFIG_AR7 is not set
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-CONFIG_ARCH_SUPPORTS_OPROFILE=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_ARM_AMBA=y
-# CONFIG_ARM_SP805_WATCHDOG is not set
-CONFIG_ATA=m
-# CONFIG_BCM47XX is not set
-# CONFIG_BCM63XX is not set
-CONFIG_BITREVERSE=y
-# CONFIG_CAVIUM_OCTEON_REFERENCE_BOARD is not set
-# CONFIG_CAVIUM_OCTEON_SIMULATOR is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_CEVT_R4K=y
-CONFIG_CEVT_R4K_LIB=y
-CONFIG_CMDLINE="console=ttyS0,115200 rootfstype=squashfs,yaffs2,jffs2"
-CONFIG_CMDLINE_BOOL=y
-# CONFIG_CMDLINE_OVERRIDE is not set
-# CONFIG_CPU_BIG_ENDIAN is not set
-CONFIG_CPU_HAS_PREFETCH=y
-CONFIG_CPU_HAS_SYNC=y
-CONFIG_CPU_LITTLE_ENDIAN=y
-CONFIG_CPU_MIPS32=y
-CONFIG_CPU_MIPS32_R1=y
-CONFIG_CPU_MIPSR1=y
-CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_HIGHMEM=y
-CONFIG_CRYPTO=m
-CONFIG_CRYPTO_AEAD2=m
-CONFIG_CRYPTO_AES=m
-CONFIG_CRYPTO_ALGAPI=m
-CONFIG_CRYPTO_ALGAPI2=m
-CONFIG_CRYPTO_ARC4=m
-CONFIG_CRYPTO_BLKCIPHER=m
-CONFIG_CRYPTO_BLKCIPHER2=m
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_HASH=m
-CONFIG_CRYPTO_HASH2=m
-CONFIG_CRYPTO_MANAGER=m
-CONFIG_CRYPTO_MANAGER2=m
-CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_PCOMP2=m
-CONFIG_CRYPTO_RNG2=m
-CONFIG_CRYPTO_WORKQUEUE=m
-CONFIG_CSRC_R4K=y
-CONFIG_CSRC_R4K_LIB=y
-CONFIG_DECOMPRESS_LZMA=y
-CONFIG_DEVPORT=y
-# CONFIG_DM9000 is not set
-CONFIG_DMA_NONCOHERENT=y
-CONFIG_EARLY_PRINTK=y
-# CONFIG_FANOTIFY is not set
-# CONFIG_FIREWIRE_NOSY is not set
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_GPIOLIB=y
-# CONFIG_GPIO_PL061 is not set
-CONFIG_GPIO_SYSFS=y
-# CONFIG_HARDLOCKUP_DETECTOR is not set
-CONFIG_HARDWARE_WATCHPOINTS=y
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAVE_ARCH_KGDB=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_HAVE_IDE=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HID=m
-CONFIG_HID_SUPPORT=y
-CONFIG_HOSTAP=m
-CONFIG_HOSTAP_FIRMWARE=y
-# CONFIG_HOSTAP_FIRMWARE_NVRAM is not set
-CONFIG_HOSTAP_PCI=m
-CONFIG_HW_HAS_PCI=y
-CONFIG_HW_RANDOM=y
-CONFIG_HZ=250
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_IMAGE_CMDLINE_HACK=y
-CONFIG_INOTIFY_USER=y
-CONFIG_INPUT=m
-# CONFIG_INPUT_GPIO_BUTTONS is not set
-# CONFIG_IP_MROUTE_MULTIPLE_TABLES is not set
-CONFIG_IRQ_CPU=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-CONFIG_LIB80211=m
-CONFIG_LIB80211_CRYPT_CCMP=m
-CONFIG_LIB80211_CRYPT_TKIP=m
-CONFIG_LIB80211_CRYPT_WEP=m
-# CONFIG_LOONGSON_MC146818 is not set
-CONFIG_LOONGSON_UART_BASE=y
-# CONFIG_MACH_DECSTATION is not set
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_MACH_JZ4740 is not set
-# CONFIG_MACH_LOONGSON is not set
-# CONFIG_MACH_TX39XX is not set
-# CONFIG_MACH_TX49XX is not set
-# CONFIG_MACH_VR41XX is not set
-# CONFIG_MFD_SUPPORT is not set
-CONFIG_MII=m
-# CONFIG_MIKROTIK_RB532 is not set
-CONFIG_MIPS=y
-# CONFIG_MIPS_ALCHEMY is not set
-# CONFIG_MIPS_COBALT is not set
-CONFIG_MIPS_L1_CACHE_SHIFT=5
-CONFIG_MIPS_MACHINE=y
-# CONFIG_MIPS_MALTA is not set
-CONFIG_MIPS_MT_DISABLED=y
-# CONFIG_MIPS_SIM is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_MTD_ADM5120=y
-CONFIG_MTD_CFI_FIXUP_MACRONIX_BOOTLOC=y
-# CONFIG_MTD_CFI_INTELEXT is not set
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_MYLOADER_PARTS=y
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_ECC=y
-CONFIG_MTD_NAND_PLATFORM=y
-# CONFIG_MTD_SM_COMMON is not set
-CONFIG_MTD_TRXSPLIT=y
-CONFIG_NEED_DMA_MAP_STATE=y
-# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
-CONFIG_NLATTR=y
-CONFIG_NLS=m
-CONFIG_NLS_DEFAULT="iso8859-1"
-CONFIG_NO_HZ=y
-# CONFIG_NO_IOPORT is not set
-# CONFIG_NXP_STB220 is not set
-# CONFIG_NXP_STB225 is not set
-CONFIG_PAGEFLAGS_EXTENDED=y
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_PCI=y
-CONFIG_PCI_DISABLE_COMMON_QUIRKS=y
-CONFIG_PCI_DOMAINS=y
-# CONFIG_PMC_MSP is not set
-# CONFIG_PMC_YOSEMITE is not set
-# CONFIG_PNX8550_JBS is not set
-# CONFIG_PNX8550_STB810 is not set
-# CONFIG_POWERTV is not set
-CONFIG_SCHED_OMIT_FRAME_POINTER=y
-CONFIG_SCSI=m
-CONFIG_SCSI_DMA=y
-CONFIG_SCSI_MOD=m
-CONFIG_SCSI_WAIT_SCAN=m
-# CONFIG_SERIAL_8250 is not set
-CONFIG_SERIAL_AMBA_PL010=y
-CONFIG_SERIAL_AMBA_PL010_CONSOLE=y
-CONFIG_SERIAL_AMBA_PL010_NUMPORTS=2
-CONFIG_SERIAL_AMBA_PL010_PORTNAME="ttyS"
-# CONFIG_SERIAL_AMBA_PL011 is not set
-# CONFIG_SERIAL_MFD_HSU is not set
-CONFIG_SERIO=y
-# CONFIG_SERIO_AMBAKMI is not set
-# CONFIG_SERIO_I8042 is not set
-# CONFIG_SERIO_LIBPS2 is not set
-# CONFIG_SERIO_PCIPS2 is not set
-# CONFIG_SERIO_RAW is not set
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SGI_IP22 is not set
-# CONFIG_SGI_IP27 is not set
-# CONFIG_SGI_IP28 is not set
-# CONFIG_SGI_IP32 is not set
-# CONFIG_SIBYTE_BIGSUR is not set
-# CONFIG_SIBYTE_CARMEL is not set
-# CONFIG_SIBYTE_CRHINE is not set
-# CONFIG_SIBYTE_CRHONE is not set
-# CONFIG_SIBYTE_LITTLESUR is not set
-# CONFIG_SIBYTE_RHONE is not set
-# CONFIG_SIBYTE_SENTOSA is not set
-# CONFIG_SIBYTE_SWARM is not set
-CONFIG_SOFT_WATCHDOG=m
-CONFIG_SSB_POSSIBLE=y
-CONFIG_STACKTRACE_SUPPORT=y
-# CONFIG_SWAP is not set
-CONFIG_SYS_HAS_CPU_MIPS32_R1=y
-CONFIG_SYS_HAS_EARLY_PRINTK=y
-CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
-CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
-CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
-CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
-# CONFIG_TC35815 is not set
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_TRACING_SUPPORT=y
-CONFIG_TRAD_SIGNALS=y
-CONFIG_USB=m
-CONFIG_USB_ADM5120_HCD=m
-CONFIG_USB_ARCH_HAS_EHCI=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_EHCI_HCD=m
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_HCD=m
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-CONFIG_USB_SUPPORT=y
-# CONFIG_USB_UHCI_HCD is not set
-CONFIG_VIRT_TO_BUS=y
-CONFIG_YAFFS_9BYTE_TAGS=y
-# CONFIG_YAFFS_ALWAYS_CHECK_CHUNK_ERASED is not set
-CONFIG_YAFFS_AUTO_YAFFS2=y
-# CONFIG_YAFFS_DISABLE_BACKGROUND is not set
-# CONFIG_YAFFS_DISABLE_BLOCK_REFRESHING is not set
-CONFIG_YAFFS_DISABLE_TAGS_ECC=y
-# CONFIG_YAFFS_DISABLE_WIDE_TNODES is not set
-# CONFIG_YAFFS_EMPTY_LOST_AND_FOUND is not set
-CONFIG_YAFFS_FS=y
-CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y
-CONFIG_YAFFS_XATTR=y
-CONFIG_YAFFS_YAFFS1=y
-CONFIG_YAFFS_YAFFS2=y
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZONE_DMA_FLAG=0
-# CONFIG_ZRAM is not set
diff --git a/target/linux/adm5120/router_le/config-2.6.37 b/target/linux/adm5120/router_le/config-2.6.37
deleted file mode 100644 (file)
index ca9065c..0000000
+++ /dev/null
@@ -1,273 +0,0 @@
-CONFIG_32BIT=y
-CONFIG_ADM5120=y
-CONFIG_ADM5120_ENET=y
-CONFIG_ADM5120_MACH_5GXI=y
-CONFIG_ADM5120_MACH_BR_6104K=y
-CONFIG_ADM5120_MACH_BR_6104KP=y
-CONFIG_ADM5120_MACH_BR_61X4WG=y
-CONFIG_ADM5120_MACH_CAS_771=y
-CONFIG_ADM5120_MACH_EASY5120P_ATA=y
-CONFIG_ADM5120_MACH_EASY5120_RT=y
-CONFIG_ADM5120_MACH_EASY5120_WVOIP=y
-CONFIG_ADM5120_MACH_EASY83000=y
-CONFIG_ADM5120_MACH_EB_214A=y
-CONFIG_ADM5120_MACH_NFS_101=y
-CONFIG_ADM5120_MACH_NP27G=y
-CONFIG_ADM5120_MACH_NP28G=y
-CONFIG_ADM5120_MACH_PMUGW=y
-CONFIG_ADM5120_MACH_RB_11X=y
-CONFIG_ADM5120_MACH_RB_133=y
-CONFIG_ADM5120_MACH_RB_133C=y
-CONFIG_ADM5120_MACH_RB_150=y
-CONFIG_ADM5120_MACH_RB_153=y
-CONFIG_ADM5120_MACH_RB_192=y
-CONFIG_ADM5120_MACH_WP54=y
-CONFIG_ADM5120_OEM_CELLVISION=y
-CONFIG_ADM5120_OEM_COMPEX=y
-CONFIG_ADM5120_OEM_EDIMAX=y
-CONFIG_ADM5120_OEM_GENERIC=y
-CONFIG_ADM5120_OEM_INFINEON=y
-CONFIG_ADM5120_OEM_MIKROTIK=y
-CONFIG_ADM5120_OEM_MOTOROLA=y
-CONFIG_ADM5120_OEM_OSBRIDGE=y
-# CONFIG_ADM5120_OEM_ZYXEL is not set
-CONFIG_ADM5120_SOC_BGA=y
-CONFIG_ADM5120_WDT=y
-# CONFIG_ALCHEMY_GPIO_INDIRECT is not set
-# CONFIG_AR7 is not set
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-CONFIG_ARCH_SUPPORTS_OPROFILE=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_ARM_AMBA=y
-# CONFIG_ARM_SP805_WATCHDOG is not set
-CONFIG_ATA=m
-# CONFIG_BCM47XX is not set
-# CONFIG_BCM63XX is not set
-CONFIG_BITREVERSE=y
-# CONFIG_CAVIUM_OCTEON_REFERENCE_BOARD is not set
-# CONFIG_CAVIUM_OCTEON_SIMULATOR is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_CEVT_R4K=y
-CONFIG_CEVT_R4K_LIB=y
-CONFIG_CMDLINE="console=ttyS0,115200 rootfstype=squashfs,yaffs2,jffs2"
-CONFIG_CMDLINE_BOOL=y
-# CONFIG_CMDLINE_OVERRIDE is not set
-# CONFIG_CPU_BIG_ENDIAN is not set
-CONFIG_CPU_HAS_PREFETCH=y
-CONFIG_CPU_HAS_SYNC=y
-CONFIG_CPU_LITTLE_ENDIAN=y
-CONFIG_CPU_MIPS32=y
-CONFIG_CPU_MIPS32_R1=y
-CONFIG_CPU_MIPSR1=y
-CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_HIGHMEM=y
-CONFIG_CRYPTO=m
-CONFIG_CRYPTO_AEAD2=m
-CONFIG_CRYPTO_AES=m
-CONFIG_CRYPTO_ALGAPI=m
-CONFIG_CRYPTO_ALGAPI2=m
-CONFIG_CRYPTO_ARC4=m
-CONFIG_CRYPTO_BLKCIPHER=m
-CONFIG_CRYPTO_BLKCIPHER2=m
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_HASH=m
-CONFIG_CRYPTO_HASH2=m
-CONFIG_CRYPTO_MANAGER=m
-CONFIG_CRYPTO_MANAGER2=m
-CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_PCOMP2=m
-CONFIG_CRYPTO_RNG2=m
-CONFIG_CRYPTO_WORKQUEUE=m
-CONFIG_CSRC_R4K=y
-CONFIG_CSRC_R4K_LIB=y
-CONFIG_DECOMPRESS_LZMA=y
-CONFIG_DEVPORT=y
-# CONFIG_DM9000 is not set
-CONFIG_DMA_NONCOHERENT=y
-CONFIG_EARLY_PRINTK=y
-# CONFIG_FANOTIFY is not set
-# CONFIG_FIREWIRE_NOSY is not set
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_GPIOLIB=y
-# CONFIG_GPIO_PL061 is not set
-CONFIG_GPIO_SYSFS=y
-# CONFIG_HARDLOCKUP_DETECTOR is not set
-CONFIG_HARDWARE_WATCHPOINTS=y
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAVE_ARCH_KGDB=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_HAVE_IDE=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HID=m
-CONFIG_HID_SUPPORT=y
-CONFIG_HOSTAP=m
-CONFIG_HOSTAP_FIRMWARE=y
-# CONFIG_HOSTAP_FIRMWARE_NVRAM is not set
-CONFIG_HOSTAP_PCI=m
-CONFIG_HW_HAS_PCI=y
-CONFIG_HW_RANDOM=y
-CONFIG_HZ=250
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_IMAGE_CMDLINE_HACK=y
-CONFIG_INOTIFY_USER=y
-CONFIG_INPUT=m
-# CONFIG_INPUT_GPIO_BUTTONS is not set
-# CONFIG_IP_MROUTE_MULTIPLE_TABLES is not set
-CONFIG_IRQ_CPU=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-CONFIG_LIB80211=m
-CONFIG_LIB80211_CRYPT_CCMP=m
-CONFIG_LIB80211_CRYPT_TKIP=m
-CONFIG_LIB80211_CRYPT_WEP=m
-# CONFIG_LOONGSON_MC146818 is not set
-CONFIG_LOONGSON_UART_BASE=y
-# CONFIG_MACH_DECSTATION is not set
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_MACH_JZ4740 is not set
-# CONFIG_MACH_LOONGSON is not set
-# CONFIG_MACH_TX39XX is not set
-# CONFIG_MACH_TX49XX is not set
-# CONFIG_MACH_VR41XX is not set
-# CONFIG_MFD_SUPPORT is not set
-CONFIG_MII=m
-# CONFIG_MIKROTIK_RB532 is not set
-CONFIG_MIPS=y
-# CONFIG_MIPS_ALCHEMY is not set
-# CONFIG_MIPS_COBALT is not set
-CONFIG_MIPS_L1_CACHE_SHIFT=5
-CONFIG_MIPS_MACHINE=y
-# CONFIG_MIPS_MALTA is not set
-CONFIG_MIPS_MT_DISABLED=y
-# CONFIG_MIPS_SIM is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_MTD_ADM5120=y
-CONFIG_MTD_CFI_FIXUP_MACRONIX_BOOTLOC=y
-# CONFIG_MTD_CFI_INTELEXT is not set
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_MYLOADER_PARTS=y
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_ECC=y
-CONFIG_MTD_NAND_PLATFORM=y
-# CONFIG_MTD_SM_COMMON is not set
-CONFIG_MTD_TRXSPLIT=y
-CONFIG_NEED_DMA_MAP_STATE=y
-# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
-CONFIG_NLATTR=y
-CONFIG_NLS=m
-CONFIG_NLS_DEFAULT="iso8859-1"
-CONFIG_NO_HZ=y
-# CONFIG_NO_IOPORT is not set
-# CONFIG_NXP_STB220 is not set
-# CONFIG_NXP_STB225 is not set
-CONFIG_PAGEFLAGS_EXTENDED=y
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_PCI=y
-CONFIG_PCI_DISABLE_COMMON_QUIRKS=y
-CONFIG_PCI_DOMAINS=y
-# CONFIG_PMC_MSP is not set
-# CONFIG_PMC_YOSEMITE is not set
-# CONFIG_PNX8550_JBS is not set
-# CONFIG_PNX8550_STB810 is not set
-# CONFIG_POWERTV is not set
-CONFIG_SCHED_OMIT_FRAME_POINTER=y
-CONFIG_SCSI=m
-CONFIG_SCSI_DMA=y
-CONFIG_SCSI_MOD=m
-CONFIG_SCSI_WAIT_SCAN=m
-# CONFIG_SERIAL_8250 is not set
-CONFIG_SERIAL_AMBA_PL010=y
-CONFIG_SERIAL_AMBA_PL010_CONSOLE=y
-CONFIG_SERIAL_AMBA_PL010_NUMPORTS=2
-CONFIG_SERIAL_AMBA_PL010_PORTNAME="ttyS"
-# CONFIG_SERIAL_AMBA_PL011 is not set
-# CONFIG_SERIAL_MFD_HSU is not set
-CONFIG_SERIO=y
-# CONFIG_SERIO_AMBAKMI is not set
-# CONFIG_SERIO_I8042 is not set
-# CONFIG_SERIO_LIBPS2 is not set
-# CONFIG_SERIO_PCIPS2 is not set
-# CONFIG_SERIO_RAW is not set
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SGI_IP22 is not set
-# CONFIG_SGI_IP27 is not set
-# CONFIG_SGI_IP28 is not set
-# CONFIG_SGI_IP32 is not set
-# CONFIG_SIBYTE_BIGSUR is not set
-# CONFIG_SIBYTE_CARMEL is not set
-# CONFIG_SIBYTE_CRHINE is not set
-# CONFIG_SIBYTE_CRHONE is not set
-# CONFIG_SIBYTE_LITTLESUR is not set
-# CONFIG_SIBYTE_RHONE is not set
-# CONFIG_SIBYTE_SENTOSA is not set
-# CONFIG_SIBYTE_SWARM is not set
-CONFIG_SOFT_WATCHDOG=m
-CONFIG_SSB_POSSIBLE=y
-CONFIG_STACKTRACE_SUPPORT=y
-# CONFIG_SWAP is not set
-CONFIG_SYS_HAS_CPU_MIPS32_R1=y
-CONFIG_SYS_HAS_EARLY_PRINTK=y
-CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
-CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
-CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
-CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
-# CONFIG_TC35815 is not set
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_TRACING_SUPPORT=y
-CONFIG_TRAD_SIGNALS=y
-CONFIG_USB=m
-CONFIG_USB_ADM5120_HCD=m
-CONFIG_USB_ARCH_HAS_EHCI=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_EHCI_HCD=m
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_HCD=m
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-CONFIG_USB_SUPPORT=y
-# CONFIG_USB_UHCI_HCD is not set
-CONFIG_VIRT_TO_BUS=y
-CONFIG_YAFFS_9BYTE_TAGS=y
-# CONFIG_YAFFS_ALWAYS_CHECK_CHUNK_ERASED is not set
-CONFIG_YAFFS_AUTO_YAFFS2=y
-# CONFIG_YAFFS_DISABLE_BACKGROUND is not set
-# CONFIG_YAFFS_DISABLE_BLOCK_REFRESHING is not set
-CONFIG_YAFFS_DISABLE_TAGS_ECC=y
-# CONFIG_YAFFS_DISABLE_WIDE_TNODES is not set
-# CONFIG_YAFFS_EMPTY_LOST_AND_FOUND is not set
-CONFIG_YAFFS_FS=y
-CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y
-CONFIG_YAFFS_XATTR=y
-CONFIG_YAFFS_YAFFS1=y
-CONFIG_YAFFS_YAFFS2=y
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZONE_DMA_FLAG=0
-# CONFIG_ZRAM is not set