adm5120: nuke 2.6.30 stuff
authorGabor Juhos <juhosg@openwrt.org>
Fri, 26 Mar 2010 10:45:31 +0000 (10:45 +0000)
committerGabor Juhos <juhosg@openwrt.org>
Fri, 26 Mar 2010 10:45:31 +0000 (10:45 +0000)
SVN-Revision: 20445

16 files changed:
target/linux/adm5120/patches-2.6.30/001-adm5120.patch [deleted file]
target/linux/adm5120/patches-2.6.30/002-adm5120_flash.patch [deleted file]
target/linux/adm5120/patches-2.6.30/003-adm5120_switch.patch [deleted file]
target/linux/adm5120/patches-2.6.30/005-adm5120_usb.patch [deleted file]
target/linux/adm5120/patches-2.6.30/007-adm5120_pci.patch [deleted file]
target/linux/adm5120/patches-2.6.30/009-adm5120_leds_switch_trigger.patch [deleted file]
target/linux/adm5120/patches-2.6.30/101-cfi_fixup_macronix_bootloc.patch [deleted file]
target/linux/adm5120/patches-2.6.30/102-jedec_pmc_39lvxxx_chips.patch [deleted file]
target/linux/adm5120/patches-2.6.30/103-mtd_trxsplit.patch [deleted file]
target/linux/adm5120/patches-2.6.30/120-rb153_cf_driver.patch [deleted file]
target/linux/adm5120/patches-2.6.30/200-amba_pl010_hacks.patch [deleted file]
target/linux/adm5120/patches-2.6.30/201-amba_bus_hacks.patch [deleted file]
target/linux/adm5120/patches-2.6.30/203-gpio_leds_brightness.patch [deleted file]
target/linux/adm5120/patches-2.6.30/310-adm5120_wdt.patch [deleted file]
target/linux/adm5120/router_be/config-2.6.30 [deleted file]
target/linux/adm5120/router_le/config-2.6.30 [deleted file]

diff --git a/target/linux/adm5120/patches-2.6.30/001-adm5120.patch b/target/linux/adm5120/patches-2.6.30/001-adm5120.patch
deleted file mode 100644 (file)
index 5547234..0000000
+++ /dev/null
@@ -1,57 +0,0 @@
---- a/arch/mips/Kconfig
-+++ b/arch/mips/Kconfig
-@@ -19,6 +19,21 @@ choice
-       prompt "System type"
-       default SGI_IP22
-+config ADM5120
-+      bool "Infineon/ADMtek ADM5120 SoC based machines"
-+      select CEVT_R4K
-+      select CSRC_R4K
-+      select SYS_HAS_CPU_MIPS32_R1
-+      select SYS_HAS_EARLY_PRINTK
-+      select DMA_NONCOHERENT
-+      select IRQ_CPU
-+      select SYS_SUPPORTS_LITTLE_ENDIAN
-+      select SYS_SUPPORTS_BIG_ENDIAN
-+      select SYS_SUPPORTS_32BIT_KERNEL
-+      select ARCH_REQUIRE_GPIOLIB
-+      select SWAP_IO_SPACE if CPU_BIG_ENDIAN
-+      select MIPS_MACHINE
-+
- config MACH_ALCHEMY
-       bool "Alchemy processor based machines"
-@@ -633,6 +648,7 @@ config CAVIUM_OCTEON_REFERENCE_BOARD
- endchoice
-+source "arch/mips/adm5120/Kconfig"
- source "arch/mips/alchemy/Kconfig"
- source "arch/mips/basler/excite/Kconfig"
- source "arch/mips/jazz/Kconfig"
---- a/arch/mips/Makefile
-+++ b/arch/mips/Makefile
-@@ -181,6 +181,22 @@ cflags-$(CONFIG_MACH_JAZZ)        += -I$(srctre
- load-$(CONFIG_MACH_JAZZ)      += 0xffffffff80080000
- #
-+# Infineon/ADMtek ADM5120
-+#
-+libs-$(CONFIG_ADM5120)                        += arch/mips/adm5120/prom/
-+core-$(CONFIG_ADM5120)                        += arch/mips/adm5120/common/
-+core-$(CONFIG_ADM5120_OEM_CELLVISION) += arch/mips/adm5120/cellvision/
-+core-$(CONFIG_ADM5120_OEM_COMPEX)     += arch/mips/adm5120/compex/
-+core-$(CONFIG_ADM5120_OEM_EDIMAX)     += arch/mips/adm5120/edimax/
-+core-$(CONFIG_ADM5120_OEM_INFINEON)   += arch/mips/adm5120/infineon/
-+core-$(CONFIG_ADM5120_OEM_MIKROTIK)   += arch/mips/adm5120/mikrotik/
-+core-$(CONFIG_ADM5120_OEM_MOTOROLA)   += arch/mips/adm5120/motorola/
-+core-$(CONFIG_ADM5120_OEM_OSBRIDGE)   += arch/mips/adm5120/osbridge/
-+core-$(CONFIG_ADM5120_OEM_ZYXEL)      += arch/mips/adm5120/zyxel/
-+cflags-$(CONFIG_ADM5120)              += -I$(srctree)/arch/mips/include/asm/mach-adm5120
-+load-$(CONFIG_ADM5120)                        += 0xffffffff80001000
-+
-+#
- # Common Alchemy Au1x00 stuff
- #
- core-$(CONFIG_SOC_AU1X00)     += arch/mips/alchemy/common/
diff --git a/target/linux/adm5120/patches-2.6.30/002-adm5120_flash.patch b/target/linux/adm5120/patches-2.6.30/002-adm5120_flash.patch
deleted file mode 100644 (file)
index 97f5b96..0000000
+++ /dev/null
@@ -1,21 +0,0 @@
---- a/drivers/mtd/maps/Kconfig
-+++ b/drivers/mtd/maps/Kconfig
-@@ -562,4 +562,8 @@ config MTD_VMU
-         To build this as a module select M here, the module will be called
-         vmu-flash.
-+config MTD_ADM5120
-+      tristate "Map driver for ADM5120 based boards"
-+      depends on ADM5120
-+
- endmenu
---- a/drivers/mtd/maps/Makefile
-+++ b/drivers/mtd/maps/Makefile
-@@ -42,6 +42,7 @@ obj-$(CONFIG_MTD_DBOX2)              += dbox2-flash.
- obj-$(CONFIG_MTD_SOLUTIONENGINE)+= solutionengine.o
- obj-$(CONFIG_MTD_PCI)         += pci.o
- obj-$(CONFIG_MTD_ALCHEMY)       += alchemy-flash.o
-+obj-$(CONFIG_MTD_ADM5120)             += adm5120-flash.o
- obj-$(CONFIG_MTD_AUTCPU12)    += autcpu12-nvram.o
- obj-$(CONFIG_MTD_EDB7312)     += edb7312.o
- obj-$(CONFIG_MTD_IMPA7)               += impa7.o
diff --git a/target/linux/adm5120/patches-2.6.30/003-adm5120_switch.patch b/target/linux/adm5120/patches-2.6.30/003-adm5120_switch.patch
deleted file mode 100644 (file)
index 771dd5f..0000000
+++ /dev/null
@@ -1,23 +0,0 @@
---- a/drivers/net/Kconfig
-+++ b/drivers/net/Kconfig
-@@ -612,6 +612,10 @@ config MIPS_AU1X00_ENET
-         If you have an Alchemy Semi AU1X00 based system
-         say Y.  Otherwise, say N.
-+config ADM5120_ENET
-+      tristate "ADM5120 Ethernet switch support"
-+      depends on ADM5120
-+
- config SGI_IOC3_ETH
-       bool "SGI IOC3 Ethernet"
-       depends on PCI && SGI_IP27
---- a/drivers/net/Makefile
-+++ b/drivers/net/Makefile
-@@ -195,6 +195,7 @@ obj-$(CONFIG_SC92031) += sc92031.o
- # This is also a 82596 and should probably be merged
- obj-$(CONFIG_LP486E) += lp486e.o
-+obj-$(CONFIG_ADM5120_ENET) += adm5120sw.o
- obj-$(CONFIG_ETH16I) += eth16i.o
- obj-$(CONFIG_ZORRO8390) += zorro8390.o 8390.o
- obj-$(CONFIG_HPLANCE) += hplance.o 7990.o
diff --git a/target/linux/adm5120/patches-2.6.30/005-adm5120_usb.patch b/target/linux/adm5120/patches-2.6.30/005-adm5120_usb.patch
deleted file mode 100644 (file)
index ca81a92..0000000
+++ /dev/null
@@ -1,33 +0,0 @@
---- a/drivers/usb/Makefile
-+++ b/drivers/usb/Makefile
-@@ -9,6 +9,7 @@ obj-$(CONFIG_USB)              += core/
- obj-$(CONFIG_USB_MON)         += mon/
- obj-$(CONFIG_PCI)             += host/
-+obj-$(CONFIG_USB_ADM5120_HCD) += host/
- obj-$(CONFIG_USB_EHCI_HCD)    += host/
- obj-$(CONFIG_USB_ISP116X_HCD) += host/
- obj-$(CONFIG_USB_OHCI_HCD)    += host/
---- a/drivers/usb/host/Kconfig
-+++ b/drivers/usb/host/Kconfig
-@@ -4,6 +4,10 @@
- comment "USB Host Controller Drivers"
-       depends on USB
-+config USB_ADM5120_HCD
-+      tristate "ADM5120 HCD support (EXPERIMENTAL)"
-+      depends on USB && ADM5120 && EXPERIMENTAL
-+
- config USB_C67X00_HCD
-       tristate "Cypress C67x00 HCD support"
-       depends on USB
---- a/drivers/usb/host/Makefile
-+++ b/drivers/usb/host/Makefile
-@@ -17,6 +17,7 @@ obj-$(CONFIG_USB_WHCI_HCD)   += whci/
- obj-$(CONFIG_PCI)             += pci-quirks.o
-+obj-$(CONFIG_USB_ADM5120_HCD) += adm5120-hcd.o
- obj-$(CONFIG_USB_EHCI_HCD)    += ehci-hcd.o
- obj-$(CONFIG_USB_OXU210HP_HCD)        += oxu210hp-hcd.o
- obj-$(CONFIG_USB_ISP116X_HCD) += isp116x-hcd.o
diff --git a/target/linux/adm5120/patches-2.6.30/007-adm5120_pci.patch b/target/linux/adm5120/patches-2.6.30/007-adm5120_pci.patch
deleted file mode 100644 (file)
index 7869c97..0000000
+++ /dev/null
@@ -1,19 +0,0 @@
---- a/arch/mips/pci/Makefile
-+++ b/arch/mips/pci/Makefile
-@@ -52,3 +52,4 @@ obj-$(CONFIG_VICTOR_MPC30X)  += fixup-mpc
- obj-$(CONFIG_ZAO_CAPCELLA)    += fixup-capcella.o
- obj-$(CONFIG_WR_PPMC)         += fixup-wrppmc.o
- obj-$(CONFIG_MIKROTIK_RB532)  += pci-rc32434.o ops-rc32434.o fixup-rc32434.o
-+obj-$(CONFIG_ADM5120)         += pci-adm5120.o
---- a/include/linux/pci_ids.h
-+++ b/include/linux/pci_ids.h
-@@ -1764,6 +1764,9 @@
- #define PCI_VENDOR_ID_ESDGMBH         0x12fe
- #define PCI_DEVICE_ID_ESDGMBH_CPCIASIO4 0x0111
-+#define PCI_VENDOR_ID_ADMTEK          0x1317
-+#define PCI_DEVICE_ID_ADMTEK_ADM5120  0x5120
-+
- #define PCI_VENDOR_ID_SIIG            0x131f
- #define PCI_SUBVENDOR_ID_SIIG         0x131f
- #define PCI_DEVICE_ID_SIIG_1S_10x_550 0x1000
diff --git a/target/linux/adm5120/patches-2.6.30/009-adm5120_leds_switch_trigger.patch b/target/linux/adm5120/patches-2.6.30/009-adm5120_leds_switch_trigger.patch
deleted file mode 100644 (file)
index 4778dea..0000000
+++ /dev/null
@@ -1,22 +0,0 @@
---- a/drivers/leds/Kconfig
-+++ b/drivers/leds/Kconfig
-@@ -306,4 +306,12 @@ config LEDS_TRIGGER_NETDEV
-         This allows LEDs to be controlled by network device activity.
-         If unsure, say Y.
-+config LEDS_TRIGGER_ADM5120_SWITCH
-+      tristate "LED ADM5120 Switch Port Status Trigger"
-+      depends on LEDS_TRIGGERS && ADM5120
-+      help
-+        This allows LEDs to be controlled by the port states of
-+        the ADM5120 built-in Ethernet Switch
-+        If unsure, say N.
-+
- endif # NEW_LEDS
---- a/drivers/leds/Makefile
-+++ b/drivers/leds/Makefile
-@@ -40,3 +40,4 @@ obj-$(CONFIG_LEDS_TRIGGER_GPIO)              += ledt
- obj-$(CONFIG_LEDS_TRIGGER_DEFAULT_ON) += ledtrig-default-on.o
- obj-$(CONFIG_LEDS_TRIGGER_MORSE)      += ledtrig-morse.o
- obj-$(CONFIG_LEDS_TRIGGER_NETDEV)      += ledtrig-netdev.o
-+obj-$(CONFIG_LEDS_TRIGGER_ADM5120_SWITCH) += ledtrig-adm5120-switch.o
diff --git a/target/linux/adm5120/patches-2.6.30/101-cfi_fixup_macronix_bootloc.patch b/target/linux/adm5120/patches-2.6.30/101-cfi_fixup_macronix_bootloc.patch
deleted file mode 100644 (file)
index 60c3ab9..0000000
+++ /dev/null
@@ -1,84 +0,0 @@
---- a/drivers/mtd/chips/cfi_cmdset_0002.c
-+++ b/drivers/mtd/chips/cfi_cmdset_0002.c
-@@ -53,6 +53,12 @@
- #define AT49BV6416            0x00d6
- #define MANUFACTURER_SAMSUNG  0x00ec
-+/* Macronix */
-+#define MX29LV160B    0x2249  /* MX29LV160 Bottom-boot chip */
-+#define MX29LV160T    0x22C4  /* MX29LV160 Top-boot chip */
-+#define MX29LV320B    0x22A8  /* MX29LV320 Bottom-boot chip */
-+#define MX29LV320T    0x22A7  /* MX29LV320 Top-boot chip */
-+
- static int cfi_amdstd_read (struct mtd_info *, loff_t, size_t, size_t *, u_char *);
- static int cfi_amdstd_write_words(struct mtd_info *, loff_t, size_t, size_t *, const u_char *);
- static int cfi_amdstd_write_buffers(struct mtd_info *, loff_t, size_t, size_t *, const u_char *);
-@@ -293,6 +299,41 @@ static void fixup_M29W128G_write_buffer(
-       }
- }
-+#ifdef CONFIG_MTD_CFI_FIXUP_MACRONIX_BOOTLOC
-+/*
-+ * Some Macronix chips has no/bad bootblock information in the CFI table
-+ */
-+static void fixup_macronix_bootloc(struct mtd_info *mtd, void* param)
-+{
-+      struct map_info *map = mtd->priv;
-+      struct cfi_private *cfi = map->fldrv_priv;
-+      struct cfi_pri_amdstd *extp = cfi->cmdset_priv;
-+      __u8 t;
-+
-+      switch (cfi->id) {
-+      /* TODO: put affected chip ids here */
-+      case MX29LV160B:
-+      case MX29LV320B:
-+              t = 2;  /* Bottom boot */
-+              break;
-+      case MX29LV160T:
-+      case MX29LV320T:
-+              t = 3;  /* Top boot */
-+              break;
-+      default:
-+              return;
-+      }
-+
-+      if (extp->TopBottom == t)
-+              /* boot location detected by the CFI layer is correct */
-+              return;
-+
-+      extp->TopBottom = t;
-+      printk("%s: Macronix chip detected, id:0x%04X, boot location forced "
-+              "to %s\n", map->name, cfi->id, (t == 2) ? "bottom" : "top");
-+}
-+#endif /* CONFIG_MTD_CFI_FIXUP_MACRONIX_BOOTLOC */
-+
- static struct cfi_fixup cfi_fixup_table[] = {
-       { CFI_MFR_ATMEL, CFI_ID_ANY, fixup_convert_atmel_pri, NULL },
- #ifdef AMD_BOOTLOC_BUG
-@@ -330,6 +371,9 @@ static struct cfi_fixup fixup_table[] = 
-        */
-       { CFI_MFR_ANY, CFI_ID_ANY, fixup_use_erase_chip, NULL },
-       { CFI_MFR_ATMEL, AT49BV6416, fixup_use_atmel_lock, NULL },
-+#ifdef CONFIG_MTD_CFI_FIXUP_MACRONIX_BOOTLOC
-+      { MANUFACTURER_MACRONIX, CFI_ID_ANY, fixup_macronix_bootloc, NULL, },
-+#endif
-       { 0, 0, NULL, NULL }
- };
---- a/drivers/mtd/chips/Kconfig
-+++ b/drivers/mtd/chips/Kconfig
-@@ -198,6 +198,14 @@ config MTD_CFI_AMDSTD
-         provides support for one of those command sets, used on chips
-         including the AMD Am29LV320.
-+config MTD_CFI_FIXUP_MACRONIX_BOOTLOC
-+      bool "Fix boot-block location for Macronix flash chips"
-+      depends on MTD_CFI_AMDSTD
-+      help
-+        Some Macronix flash chips have no/wrong boot-block location in the
-+        CFI table, and the driver may detect the type incorrectly. Select
-+        this if your board has such chip.
-+
- config MTD_CFI_STAA
-       tristate "Support for ST (Advanced Architecture) flash chips"
-       depends on MTD_GEN_PROBE
diff --git a/target/linux/adm5120/patches-2.6.30/102-jedec_pmc_39lvxxx_chips.patch b/target/linux/adm5120/patches-2.6.30/102-jedec_pmc_39lvxxx_chips.patch
deleted file mode 100644 (file)
index 55a201d..0000000
+++ /dev/null
@@ -1,68 +0,0 @@
---- a/drivers/mtd/chips/jedec_probe.c
-+++ b/drivers/mtd/chips/jedec_probe.c
-@@ -128,6 +128,10 @@
- #define UPD29F064115  0x221C
- /* PMC */
-+#define PM39LV512     0x001B
-+#define PM39LV010     0x001C
-+#define PM39LV020     0x003D
-+#define PM39LV040     0x003E
- #define PM49FL002     0x006D
- #define PM49FL004     0x006E
- #define PM49FL008     0x006A
-@@ -1249,6 +1253,54 @@ static const struct amd_flash_info jedec
-                       ERASEINFO(0x02000,2),
-                       ERASEINFO(0x04000,1),
-               }
-+        }, {
-+              .mfr_id         = MANUFACTURER_PMC,
-+              .dev_id         = PM39LV512,
-+              .name           = "PMC Pm39LV512",
-+              .devtypes       = CFI_DEVICETYPE_X8,
-+              .uaddr          = MTD_UADDR_0x0555_0x02AA,
-+              .dev_size       = SIZE_64KiB,
-+              .cmd_set        = P_ID_AMD_STD,
-+              .nr_regions     = 1,
-+              .regions        = {
-+                      ERASEINFO(0x01000,16),
-+              }
-+        }, {
-+              .mfr_id         = MANUFACTURER_PMC,
-+              .dev_id         = PM39LV010,
-+              .name           = "PMC Pm39LV010",
-+              .devtypes       = CFI_DEVICETYPE_X8,
-+              .uaddr          = MTD_UADDR_0x0555_0x02AA,
-+              .dev_size       = SIZE_128KiB,
-+              .cmd_set        = P_ID_AMD_STD,
-+              .nr_regions     = 1,
-+              .regions        = {
-+                      ERASEINFO(0x01000,32),
-+              }
-+        }, {
-+              .mfr_id         = MANUFACTURER_PMC,
-+              .dev_id         = PM39LV020,
-+              .name           = "PMC Pm39LV020",
-+              .devtypes       = CFI_DEVICETYPE_X8,
-+              .uaddr          = MTD_UADDR_0x0555_0x02AA,
-+              .dev_size       = SIZE_256KiB,
-+              .cmd_set        = P_ID_AMD_STD,
-+              .nr_regions     = 1,
-+              .regions        = {
-+                      ERASEINFO(0x01000,64),
-+              }
-+        }, {
-+              .mfr_id         = MANUFACTURER_PMC,
-+              .dev_id         = PM39LV040,
-+              .name           = "PMC Pm39LV040",
-+              .devtypes       = CFI_DEVICETYPE_X8,
-+              .uaddr          = MTD_UADDR_0x0555_0x02AA,
-+              .dev_size       = SIZE_512KiB,
-+              .cmd_set        = P_ID_AMD_STD,
-+              .nr_regions     = 1,
-+              .regions        = {
-+                      ERASEINFO(0x01000,128),
-+              }
-       }, {
-               .mfr_id         = MANUFACTURER_PMC,
-               .dev_id         = PM49FL002,
diff --git a/target/linux/adm5120/patches-2.6.30/103-mtd_trxsplit.patch b/target/linux/adm5120/patches-2.6.30/103-mtd_trxsplit.patch
deleted file mode 100644 (file)
index 69f1035..0000000
+++ /dev/null
@@ -1,24 +0,0 @@
---- a/drivers/mtd/Kconfig
-+++ b/drivers/mtd/Kconfig
-@@ -63,6 +63,11 @@ config MTD_ROOTFS_SPLIT
-       depends on MTD_PARTITIONS
-       default y
-+config MTD_TRXSPLIT
-+      bool "Automatically find and split TRX partitions"
-+      depends on MTD_PARTITIONS
-+      default n
-+
- config MTD_REDBOOT_PARTS
-       tristate "RedBoot partition table parsing"
-       depends on MTD_PARTITIONS
---- a/drivers/mtd/Makefile
-+++ b/drivers/mtd/Makefile
-@@ -8,6 +8,7 @@ mtd-y                          := mtdcore.o mtdsuper.o mtdbdi.
- mtd-$(CONFIG_MTD_PARTITIONS)  += mtdpart.o
- obj-$(CONFIG_MTD_CONCAT)      += mtdconcat.o
-+obj-$(CONFIG_MTD_TRXSPLIT)    += trxsplit.o
- obj-$(CONFIG_MTD_REDBOOT_PARTS) += redboot.o
- obj-$(CONFIG_MTD_CMDLINE_PARTS) += cmdlinepart.o
- obj-$(CONFIG_MTD_AFS_PARTS)   += afs.o
diff --git a/target/linux/adm5120/patches-2.6.30/120-rb153_cf_driver.patch b/target/linux/adm5120/patches-2.6.30/120-rb153_cf_driver.patch
deleted file mode 100644 (file)
index 3d9bbdd..0000000
+++ /dev/null
@@ -1,28 +0,0 @@
---- a/drivers/ata/Makefile
-+++ b/drivers/ata/Makefile
-@@ -73,6 +73,7 @@ obj-$(CONFIG_PATA_OCTEON_CF) += pata_oct
- obj-$(CONFIG_PATA_PLATFORM)   += pata_platform.o
- obj-$(CONFIG_PATA_OF_PLATFORM)        += pata_of_platform.o
- obj-$(CONFIG_PATA_ICSIDE)     += pata_icside.o
-+obj-$(CONFIG_PATA_RB153_CF)   += pata_rb153_cf.o
- # Should be last but two libata driver
- obj-$(CONFIG_PATA_ACPI)               += pata_acpi.o
- # Should be last but one libata driver
---- a/drivers/ata/Kconfig
-+++ b/drivers/ata/Kconfig
-@@ -568,6 +568,15 @@ config PATA_RADISYS
-         If unsure, say N.
-+config PATA_RB153_CF
-+      tristate "RouterBOARD 153 Compact Flash support"
-+      depends on ADM5120_MACH_RB_153
-+      help
-+        This option enables support for a Compact Flash connected on
-+        the RouterBOARD 153.
-+
-+        If unsure, say N.
-+
- config PATA_RB532
-       tristate "RouterBoard 532 PATA CompactFlash support"
-       depends on MIKROTIK_RB532
diff --git a/target/linux/adm5120/patches-2.6.30/200-amba_pl010_hacks.patch b/target/linux/adm5120/patches-2.6.30/200-amba_pl010_hacks.patch
deleted file mode 100644 (file)
index 2857644..0000000
+++ /dev/null
@@ -1,378 +0,0 @@
---- a/drivers/serial/amba-pl010.c
-+++ b/drivers/serial/amba-pl010.c
-@@ -50,11 +50,10 @@
- #include <asm/io.h>
--#define UART_NR               8
--
- #define SERIAL_AMBA_MAJOR     204
- #define SERIAL_AMBA_MINOR     16
--#define SERIAL_AMBA_NR                UART_NR
-+#define SERIAL_AMBA_NR                CONFIG_SERIAL_AMBA_PL010_NUMPORTS
-+#define SERIAL_AMBA_NAME      CONFIG_SERIAL_AMBA_PL010_PORTNAME
- #define AMBA_ISR_PASS_LIMIT   256
-@@ -80,9 +79,9 @@ static void pl010_stop_tx(struct uart_po
-       struct uart_amba_port *uap = (struct uart_amba_port *)port;
-       unsigned int cr;
--      cr = readb(uap->port.membase + UART010_CR);
-+      cr = __raw_readl(uap->port.membase + UART010_CR);
-       cr &= ~UART010_CR_TIE;
--      writel(cr, uap->port.membase + UART010_CR);
-+      __raw_writel(cr, uap->port.membase + UART010_CR);
- }
- static void pl010_start_tx(struct uart_port *port)
-@@ -90,9 +89,9 @@ static void pl010_start_tx(struct uart_p
-       struct uart_amba_port *uap = (struct uart_amba_port *)port;
-       unsigned int cr;
--      cr = readb(uap->port.membase + UART010_CR);
-+      cr = __raw_readl(uap->port.membase + UART010_CR);
-       cr |= UART010_CR_TIE;
--      writel(cr, uap->port.membase + UART010_CR);
-+      __raw_writel(cr, uap->port.membase + UART010_CR);
- }
- static void pl010_stop_rx(struct uart_port *port)
-@@ -100,9 +99,9 @@ static void pl010_stop_rx(struct uart_po
-       struct uart_amba_port *uap = (struct uart_amba_port *)port;
-       unsigned int cr;
--      cr = readb(uap->port.membase + UART010_CR);
-+      cr = __raw_readl(uap->port.membase + UART010_CR);
-       cr &= ~(UART010_CR_RIE | UART010_CR_RTIE);
--      writel(cr, uap->port.membase + UART010_CR);
-+      __raw_writel(cr, uap->port.membase + UART010_CR);
- }
- static void pl010_enable_ms(struct uart_port *port)
-@@ -110,9 +109,9 @@ static void pl010_enable_ms(struct uart_
-       struct uart_amba_port *uap = (struct uart_amba_port *)port;
-       unsigned int cr;
--      cr = readb(uap->port.membase + UART010_CR);
-+      cr = __raw_readl(uap->port.membase + UART010_CR);
-       cr |= UART010_CR_MSIE;
--      writel(cr, uap->port.membase + UART010_CR);
-+      __raw_writel(cr, uap->port.membase + UART010_CR);
- }
- static void pl010_rx_chars(struct uart_amba_port *uap)
-@@ -120,9 +119,9 @@ static void pl010_rx_chars(struct uart_a
-       struct tty_struct *tty = uap->port.info->port.tty;
-       unsigned int status, ch, flag, rsr, max_count = 256;
--      status = readb(uap->port.membase + UART01x_FR);
-+      status = __raw_readl(uap->port.membase + UART01x_FR);
-       while (UART_RX_DATA(status) && max_count--) {
--              ch = readb(uap->port.membase + UART01x_DR);
-+              ch = __raw_readl(uap->port.membase + UART01x_DR);
-               flag = TTY_NORMAL;
-               uap->port.icount.rx++;
-@@ -131,9 +130,9 @@ static void pl010_rx_chars(struct uart_a
-                * Note that the error handling code is
-                * out of the main execution path
-                */
--              rsr = readb(uap->port.membase + UART01x_RSR) | UART_DUMMY_RSR_RX;
-+              rsr = __raw_readl(uap->port.membase + UART01x_RSR) | UART_DUMMY_RSR_RX;
-               if (unlikely(rsr & UART01x_RSR_ANY)) {
--                      writel(0, uap->port.membase + UART01x_ECR);
-+                      __raw_writel(0, uap->port.membase + UART01x_ECR);
-                       if (rsr & UART01x_RSR_BE) {
-                               rsr &= ~(UART01x_RSR_FE | UART01x_RSR_PE);
-@@ -163,7 +162,7 @@ static void pl010_rx_chars(struct uart_a
-               uart_insert_char(&uap->port, rsr, UART01x_RSR_OE, ch, flag);
-       ignore_char:
--              status = readb(uap->port.membase + UART01x_FR);
-+              status = __raw_readl(uap->port.membase + UART01x_FR);
-       }
-       spin_unlock(&uap->port.lock);
-       tty_flip_buffer_push(tty);
-@@ -176,7 +175,7 @@ static void pl010_tx_chars(struct uart_a
-       int count;
-       if (uap->port.x_char) {
--              writel(uap->port.x_char, uap->port.membase + UART01x_DR);
-+              __raw_writel(uap->port.x_char, uap->port.membase + UART01x_DR);
-               uap->port.icount.tx++;
-               uap->port.x_char = 0;
-               return;
-@@ -188,7 +187,7 @@ static void pl010_tx_chars(struct uart_a
-       count = uap->port.fifosize >> 1;
-       do {
--              writel(xmit->buf[xmit->tail], uap->port.membase + UART01x_DR);
-+              __raw_writel(xmit->buf[xmit->tail], uap->port.membase + UART01x_DR);
-               xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
-               uap->port.icount.tx++;
-               if (uart_circ_empty(xmit))
-@@ -206,9 +205,9 @@ static void pl010_modem_status(struct ua
- {
-       unsigned int status, delta;
--      writel(0, uap->port.membase + UART010_ICR);
-+      __raw_writel(0, uap->port.membase + UART010_ICR);
--      status = readb(uap->port.membase + UART01x_FR) & UART01x_FR_MODEM_ANY;
-+      status = __raw_readl(uap->port.membase + UART01x_FR) & UART01x_FR_MODEM_ANY;
-       delta = status ^ uap->old_status;
-       uap->old_status = status;
-@@ -236,7 +235,7 @@ static irqreturn_t pl010_int(int irq, vo
-       spin_lock(&uap->port.lock);
--      status = readb(uap->port.membase + UART010_IIR);
-+      status = __raw_readl(uap->port.membase + UART010_IIR);
-       if (status) {
-               do {
-                       if (status & (UART010_IIR_RTIS | UART010_IIR_RIS))
-@@ -249,7 +248,7 @@ static irqreturn_t pl010_int(int irq, vo
-                       if (pass_counter-- == 0)
-                               break;
--                      status = readb(uap->port.membase + UART010_IIR);
-+                      status = __raw_readl(uap->port.membase + UART010_IIR);
-               } while (status & (UART010_IIR_RTIS | UART010_IIR_RIS |
-                                  UART010_IIR_TIS));
-               handled = 1;
-@@ -263,7 +262,7 @@ static irqreturn_t pl010_int(int irq, vo
- static unsigned int pl010_tx_empty(struct uart_port *port)
- {
-       struct uart_amba_port *uap = (struct uart_amba_port *)port;
--      unsigned int status = readb(uap->port.membase + UART01x_FR);
-+      unsigned int status = __raw_readl(uap->port.membase + UART01x_FR);
-       return status & UART01x_FR_BUSY ? 0 : TIOCSER_TEMT;
- }
-@@ -273,7 +272,7 @@ static unsigned int pl010_get_mctrl(stru
-       unsigned int result = 0;
-       unsigned int status;
--      status = readb(uap->port.membase + UART01x_FR);
-+      status = __raw_readl(uap->port.membase + UART01x_FR);
-       if (status & UART01x_FR_DCD)
-               result |= TIOCM_CAR;
-       if (status & UART01x_FR_DSR)
-@@ -299,12 +298,12 @@ static void pl010_break_ctl(struct uart_
-       unsigned int lcr_h;
-       spin_lock_irqsave(&uap->port.lock, flags);
--      lcr_h = readb(uap->port.membase + UART010_LCRH);
-+      lcr_h = __raw_readl(uap->port.membase + UART010_LCRH);
-       if (break_state == -1)
-               lcr_h |= UART01x_LCRH_BRK;
-       else
-               lcr_h &= ~UART01x_LCRH_BRK;
--      writel(lcr_h, uap->port.membase + UART010_LCRH);
-+      __raw_writel(lcr_h, uap->port.membase + UART010_LCRH);
-       spin_unlock_irqrestore(&uap->port.lock, flags);
- }
-@@ -332,12 +331,12 @@ static int pl010_startup(struct uart_por
-       /*
-        * initialise the old status of the modem signals
-        */
--      uap->old_status = readb(uap->port.membase + UART01x_FR) & UART01x_FR_MODEM_ANY;
-+      uap->old_status = __raw_readl(uap->port.membase + UART01x_FR) & UART01x_FR_MODEM_ANY;
-       /*
-        * Finally, enable interrupts
-        */
--      writel(UART01x_CR_UARTEN | UART010_CR_RIE | UART010_CR_RTIE,
-+      __raw_writel(UART01x_CR_UARTEN | UART010_CR_RIE | UART010_CR_RTIE,
-              uap->port.membase + UART010_CR);
-       return 0;
-@@ -360,10 +359,10 @@ static void pl010_shutdown(struct uart_p
-       /*
-        * disable all interrupts, disable the port
-        */
--      writel(0, uap->port.membase + UART010_CR);
-+      __raw_writel(0, uap->port.membase + UART010_CR);
-       /* disable break condition and fifos */
--      writel(readb(uap->port.membase + UART010_LCRH) &
-+      __raw_writel(__raw_readl(uap->port.membase + UART010_LCRH) &
-               ~(UART01x_LCRH_BRK | UART01x_LCRH_FEN),
-              uap->port.membase + UART010_LCRH);
-@@ -385,7 +384,7 @@ pl010_set_termios(struct uart_port *port
-       /*
-        * Ask the core to calculate the divisor for us.
-        */
--      baud = uart_get_baud_rate(port, termios, old, 0, uap->port.uartclk/16); 
-+      baud = uart_get_baud_rate(port, termios, old, 0, uap->port.uartclk/16);
-       quot = uart_get_divisor(port, baud);
-       switch (termios->c_cflag & CSIZE) {
-@@ -448,25 +447,25 @@ pl010_set_termios(struct uart_port *port
-               uap->port.ignore_status_mask |= UART_DUMMY_RSR_RX;
-       /* first, disable everything */
--      old_cr = readb(uap->port.membase + UART010_CR) & ~UART010_CR_MSIE;
-+      old_cr = __raw_readl(uap->port.membase + UART010_CR) & ~UART010_CR_MSIE;
-       if (UART_ENABLE_MS(port, termios->c_cflag))
-               old_cr |= UART010_CR_MSIE;
--      writel(0, uap->port.membase + UART010_CR);
-+      __raw_writel(0, uap->port.membase + UART010_CR);
-       /* Set baud rate */
-       quot -= 1;
--      writel((quot & 0xf00) >> 8, uap->port.membase + UART010_LCRM);
--      writel(quot & 0xff, uap->port.membase + UART010_LCRL);
-+      __raw_writel((quot & 0xf00) >> 8, uap->port.membase + UART010_LCRM);
-+      __raw_writel(quot & 0xff, uap->port.membase + UART010_LCRL);
-       /*
-        * ----------v----------v----------v----------v-----
-        * NOTE: MUST BE WRITTEN AFTER UARTLCR_M & UARTLCR_L
-        * ----------^----------^----------^----------^-----
-        */
--      writel(lcr_h, uap->port.membase + UART010_LCRH);
--      writel(old_cr, uap->port.membase + UART010_CR);
-+      __raw_writel(lcr_h, uap->port.membase + UART010_LCRH);
-+      __raw_writel(old_cr, uap->port.membase + UART010_CR);
-       spin_unlock_irqrestore(&uap->port.lock, flags);
- }
-@@ -538,7 +537,7 @@ static struct uart_ops amba_pl010_pops =
-       .verify_port    = pl010_verify_port,
- };
--static struct uart_amba_port *amba_ports[UART_NR];
-+static struct uart_amba_port *amba_ports[SERIAL_AMBA_NR];
- #ifdef CONFIG_SERIAL_AMBA_PL010_CONSOLE
-@@ -548,10 +547,10 @@ static void pl010_console_putchar(struct
-       unsigned int status;
-       do {
--              status = readb(uap->port.membase + UART01x_FR);
-+              status = __raw_readl(uap->port.membase + UART01x_FR);
-               barrier();
-       } while (!UART_TX_READY(status));
--      writel(ch, uap->port.membase + UART01x_DR);
-+      __raw_writel(ch, uap->port.membase + UART01x_DR);
- }
- static void
-@@ -565,8 +564,8 @@ pl010_console_write(struct console *co, 
-       /*
-        *      First save the CR then disable the interrupts
-        */
--      old_cr = readb(uap->port.membase + UART010_CR);
--      writel(UART01x_CR_UARTEN, uap->port.membase + UART010_CR);
-+      old_cr = __raw_readl(uap->port.membase + UART010_CR);
-+      __raw_writel(UART01x_CR_UARTEN, uap->port.membase + UART010_CR);
-       uart_console_write(&uap->port, s, count, pl010_console_putchar);
-@@ -575,10 +574,10 @@ pl010_console_write(struct console *co, 
-        *      and restore the TCR
-        */
-       do {
--              status = readb(uap->port.membase + UART01x_FR);
-+              status = __raw_readl(uap->port.membase + UART01x_FR);
-               barrier();
-       } while (status & UART01x_FR_BUSY);
--      writel(old_cr, uap->port.membase + UART010_CR);
-+      __raw_writel(old_cr, uap->port.membase + UART010_CR);
-       clk_disable(uap->clk);
- }
-@@ -587,9 +586,9 @@ static void __init
- pl010_console_get_options(struct uart_amba_port *uap, int *baud,
-                            int *parity, int *bits)
- {
--      if (readb(uap->port.membase + UART010_CR) & UART01x_CR_UARTEN) {
-+      if (__raw_readl(uap->port.membase + UART010_CR) & UART01x_CR_UARTEN) {
-               unsigned int lcr_h, quot;
--              lcr_h = readb(uap->port.membase + UART010_LCRH);
-+              lcr_h = __raw_readl(uap->port.membase + UART010_LCRH);
-               *parity = 'n';
-               if (lcr_h & UART01x_LCRH_PEN) {
-@@ -604,8 +603,8 @@ pl010_console_get_options(struct uart_am
-               else
-                       *bits = 8;
--              quot = readb(uap->port.membase + UART010_LCRL) |
--                     readb(uap->port.membase + UART010_LCRM) << 8;
-+              quot = __raw_readl(uap->port.membase + UART010_LCRL) |
-+                     __raw_readl(uap->port.membase + UART010_LCRM) << 8;
-               *baud = uap->port.uartclk / (16 * (quot + 1));
-       }
- }
-@@ -623,7 +622,7 @@ static int __init pl010_console_setup(st
-        * if so, search for the first available port that does have
-        * console support.
-        */
--      if (co->index >= UART_NR)
-+      if (co->index >= SERIAL_AMBA_NR)
-               co->index = 0;
-       uap = amba_ports[co->index];
-       if (!uap)
-@@ -641,7 +640,7 @@ static int __init pl010_console_setup(st
- static struct uart_driver amba_reg;
- static struct console amba_console = {
--      .name           = "ttyAM",
-+      .name           = SERIAL_AMBA_NAME,
-       .write          = pl010_console_write,
-       .device         = uart_console_device,
-       .setup          = pl010_console_setup,
-@@ -657,11 +656,11 @@ static struct console amba_console = {
- static struct uart_driver amba_reg = {
-       .owner                  = THIS_MODULE,
--      .driver_name            = "ttyAM",
--      .dev_name               = "ttyAM",
-+      .driver_name            = SERIAL_AMBA_NAME,
-+      .dev_name               = SERIAL_AMBA_NAME,
-       .major                  = SERIAL_AMBA_MAJOR,
-       .minor                  = SERIAL_AMBA_MINOR,
--      .nr                     = UART_NR,
-+      .nr                     = SERIAL_AMBA_NR,
-       .cons                   = AMBA_CONSOLE,
- };
---- a/drivers/serial/Kconfig
-+++ b/drivers/serial/Kconfig
-@@ -284,10 +284,25 @@ config SERIAL_AMBA_PL010
-       help
-         This selects the ARM(R) AMBA(R) PrimeCell PL010 UART.  If you have
-         an Integrator/AP or Integrator/PP2 platform, or if you have a
--        Cirrus Logic EP93xx CPU, say Y or M here.
-+        Cirrus Logic EP93xx CPU or an Infineon ADM5120 SOC, say Y or M here.
-         If unsure, say N.
-+config SERIAL_AMBA_PL010_NUMPORTS
-+      int "Maximum number of AMBA PL010 serial ports"
-+      depends on SERIAL_AMBA_PL010
-+      default "8"
-+      ---help---
-+        Set this to the number of serial ports you want the AMBA PL010 driver
-+        to support.
-+
-+config SERIAL_AMBA_PL010_PORTNAME
-+      string "Name of the AMBA PL010 serial ports"
-+      depends on SERIAL_AMBA_PL010
-+      default "ttyAM"
-+      ---help---
-+        ::: To be written :::
-+
- config SERIAL_AMBA_PL010_CONSOLE
-       bool "Support for console on AMBA serial port"
-       depends on SERIAL_AMBA_PL010=y
diff --git a/target/linux/adm5120/patches-2.6.30/201-amba_bus_hacks.patch b/target/linux/adm5120/patches-2.6.30/201-amba_bus_hacks.patch
deleted file mode 100644 (file)
index 9db3e55..0000000
+++ /dev/null
@@ -1,13 +0,0 @@
---- a/drivers/amba/bus.c
-+++ b/drivers/amba/bus.c
-@@ -18,6 +18,10 @@
- #include <asm/irq.h>
- #include <asm/sizes.h>
-+#ifndef NO_IRQ
-+#define NO_IRQ                (-1)
-+#endif
-+
- #define to_amba_device(d)     container_of(d, struct amba_device, dev)
- #define to_amba_driver(d)     container_of(d, struct amba_driver, drv)
diff --git a/target/linux/adm5120/patches-2.6.30/203-gpio_leds_brightness.patch b/target/linux/adm5120/patches-2.6.30/203-gpio_leds_brightness.patch
deleted file mode 100644 (file)
index 8bccf39..0000000
+++ /dev/null
@@ -1,27 +0,0 @@
---- a/drivers/leds/leds-gpio.c
-+++ b/drivers/leds/leds-gpio.c
-@@ -44,13 +44,17 @@ static void gpio_led_set(struct led_clas
-               container_of(led_cdev, struct gpio_led_data, cdev);
-       int level;
--      if (value == LED_OFF)
--              level = 0;
--      else
--              level = 1;
--
--      if (led_dat->active_low)
--              level = !level;
-+      switch (value) {
-+      case LED_OFF:
-+              level = led_dat->active_low ? 1 : 0;
-+              break;
-+      case LED_FULL:
-+              level = led_dat->active_low ? 0 : 1;
-+              break;
-+      default:
-+              level = value;
-+              break;
-+      }
-       /* Setting GPIOs with I2C/etc requires a task context, and we don't
-        * seem to have a reliable way to know if we're already in one; so
diff --git a/target/linux/adm5120/patches-2.6.30/310-adm5120_wdt.patch b/target/linux/adm5120/patches-2.6.30/310-adm5120_wdt.patch
deleted file mode 100644 (file)
index bb5e613..0000000
+++ /dev/null
@@ -1,31 +0,0 @@
---- a/drivers/watchdog/Kconfig
-+++ b/drivers/watchdog/Kconfig
-@@ -713,6 +713,18 @@ config RC32434_WDT
-         To compile this driver as a module, choose M here: the
-         module will be called rc32434_wdt.
-+config ADM5120_WDT
-+      tristate "Infineon ADM5120 SoC hardware watchdog"
-+      depends on WATCHDOG && ADM5120
-+      help
-+        This is a driver for hardware watchdog integrated in Infineon
-+        ADM5120 SoC. This watchdog simply watches your kernel to make sure
-+        it doesn't freeze, and if it does, it reboots your computer after a
-+        certain amount of time.
-+
-+        To compile this driver as a module, choose M here: the module will be
-+        called adm5120_wdt.
-+
- config INDYDOG
-       tristate "Indy/I2 Hardware Watchdog"
-       depends on SGI_HAS_INDYDOG
---- a/drivers/watchdog/Makefile
-+++ b/drivers/watchdog/Makefile
-@@ -105,6 +105,7 @@ obj-$(CONFIG_WDT_RM9K_GPI) += rm9k_wdt.o
- obj-$(CONFIG_SIBYTE_WDOG) += sb_wdog.o
- obj-$(CONFIG_AR7_WDT) += ar7_wdt.o
- obj-$(CONFIG_TXX9_WDT) += txx9wdt.o
-+obj-$(CONFIG_ADM5120_WDT) += adm5120_wdt.o
- # PARISC Architecture
diff --git a/target/linux/adm5120/router_be/config-2.6.30 b/target/linux/adm5120/router_be/config-2.6.30
deleted file mode 100644 (file)
index cde882d..0000000
+++ /dev/null
@@ -1,205 +0,0 @@
-CONFIG_32BIT=y
-# CONFIG_64BIT is not set
-CONFIG_ADM5120=y
-CONFIG_ADM5120_ENET=y
-CONFIG_ADM5120_MACH_5GXI=y
-CONFIG_ADM5120_MACH_P_334WT=y
-CONFIG_ADM5120_MACH_P_335=y
-# CONFIG_ADM5120_OEM_CELLVISION is not set
-# CONFIG_ADM5120_OEM_COMPEX is not set
-# CONFIG_ADM5120_OEM_EDIMAX is not set
-# CONFIG_ADM5120_OEM_INFINEON is not set
-# CONFIG_ADM5120_OEM_MIKROTIK is not set
-# CONFIG_ADM5120_OEM_MOTOROLA is not set
-CONFIG_ADM5120_OEM_OSBRIDGE=y
-CONFIG_ADM5120_OEM_ZYXEL=y
-CONFIG_ADM5120_SOC_BGA=y
-CONFIG_ADM5120_WDT=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-CONFIG_ARCH_SUPPORTS_OPROFILE=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_ARM_AMBA=y
-# CONFIG_BCM47XX is not set
-# CONFIG_BINARY_PRINTF is not set
-CONFIG_BINFMT_MISC=m
-CONFIG_BITREVERSE=y
-# CONFIG_CAVIUM_OCTEON_REFERENCE_BOARD is not set
-# CONFIG_CAVIUM_OCTEON_SIMULATOR is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_CEVT_R4K=y
-CONFIG_CEVT_R4K_LIB=y
-CONFIG_CMDLINE="console=ttyS0,115200 rootfstype=squashfs,jffs2"
-CONFIG_CPU_BIG_ENDIAN=y
-# CONFIG_CPU_CAVIUM_OCTEON is not set
-CONFIG_CPU_HAS_LLSC=y
-CONFIG_CPU_HAS_PREFETCH=y
-CONFIG_CPU_HAS_SYNC=y
-# CONFIG_CPU_LITTLE_ENDIAN is not set
-# CONFIG_CPU_LOONGSON2 is not set
-CONFIG_CPU_MIPS32=y
-CONFIG_CPU_MIPS32_R1=y
-# CONFIG_CPU_MIPS32_R2 is not set
-# CONFIG_CPU_MIPS64_R1 is not set
-# CONFIG_CPU_MIPS64_R2 is not set
-CONFIG_CPU_MIPSR1=y
-# CONFIG_CPU_NEVADA is not set
-# CONFIG_CPU_R10000 is not set
-# CONFIG_CPU_R3000 is not set
-# CONFIG_CPU_R4300 is not set
-# CONFIG_CPU_R4X00 is not set
-# CONFIG_CPU_R5000 is not set
-# CONFIG_CPU_R5432 is not set
-# CONFIG_CPU_R5500 is not set
-# CONFIG_CPU_R6000 is not set
-# CONFIG_CPU_R8000 is not set
-# CONFIG_CPU_RM7000 is not set
-# CONFIG_CPU_RM9000 is not set
-# CONFIG_CPU_SB1 is not set
-CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_HIGHMEM=y
-# CONFIG_CPU_TX39XX is not set
-# CONFIG_CPU_TX49XX is not set
-# CONFIG_CPU_VR41XX is not set
-CONFIG_CSRC_R4K=y
-CONFIG_CSRC_R4K_LIB=y
-CONFIG_DECOMPRESS_LZMA=y
-CONFIG_DEVPORT=y
-# CONFIG_DM9000 is not set
-CONFIG_DMA_NEED_PCI_MAP_STATE=y
-CONFIG_DMA_NONCOHERENT=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_ELF_CORE=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_FS_POSIX_ACL=y
-CONFIG_GENERIC_ACL=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_GPIOLIB=y
-CONFIG_GPIO_SYSFS=y
-CONFIG_HARDWARE_WATCHPOINTS=y
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-CONFIG_HAVE_IDE=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HID=m
-CONFIG_HID_SUPPORT=y
-CONFIG_HW_HAS_PCI=y
-CONFIG_HW_RANDOM=y
-CONFIG_HZ=250
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-CONFIG_INPUT=m
-# CONFIG_INPUT_GPIO_BUTTONS is not set
-# CONFIG_INPUT_YEALINK is not set
-CONFIG_IRQ_CPU=y
-CONFIG_LEDS_GPIO=m
-CONFIG_LEDS_TRIGGER_ADM5120_SWITCH=m
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_LEMOTE_FULONG is not set
-# CONFIG_MACH_ALCHEMY is not set
-# CONFIG_MACH_DECSTATION is not set
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_MACH_TX39XX is not set
-# CONFIG_MACH_TX49XX is not set
-# CONFIG_MACH_VR41XX is not set
-CONFIG_MII=m
-# CONFIG_MIKROTIK_RB532 is not set
-CONFIG_MIPS=y
-# CONFIG_MIPS_COBALT is not set
-CONFIG_MIPS_L1_CACHE_SHIFT=5
-CONFIG_MIPS_MACHINE=y
-# CONFIG_MIPS_MALTA is not set
-CONFIG_MIPS_MT_DISABLED=y
-# CONFIG_MIPS_MT_SMP is not set
-# CONFIG_MIPS_MT_SMTC is not set
-# CONFIG_MIPS_SIM is not set
-CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_MTD_ADM5120=y
-CONFIG_MTD_BLOCK2MTD=y
-CONFIG_MTD_CFI_FIXUP_MACRONIX_BOOTLOC=y
-# CONFIG_MTD_CFI_INTELEXT is not set
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_TRXSPLIT=y
-# CONFIG_NET_PCI is not set
-# CONFIG_NO_IOPORT is not set
-# CONFIG_NXP_STB220 is not set
-# CONFIG_NXP_STB225 is not set
-CONFIG_PAGEFLAGS_EXTENDED=y
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_PCI=y
-CONFIG_PCI_DISABLE_COMMON_QUIRKS=y
-CONFIG_PCI_DOMAINS=y
-# CONFIG_PMC_MSP is not set
-# CONFIG_PMC_YOSEMITE is not set
-# CONFIG_PNX8550_JBS is not set
-# CONFIG_PNX8550_STB810 is not set
-# CONFIG_PROBE_INITRD_HEADER is not set
-CONFIG_SCHED_OMIT_FRAME_POINTER=y
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SERIAL_8250 is not set
-CONFIG_SERIAL_AMBA_PL010=y
-CONFIG_SERIAL_AMBA_PL010_CONSOLE=y
-CONFIG_SERIAL_AMBA_PL010_NUMPORTS=2
-CONFIG_SERIAL_AMBA_PL010_PORTNAME="ttyS"
-# CONFIG_SERIAL_AMBA_PL011 is not set
-CONFIG_SERIO=y
-# CONFIG_SERIO_AMBAKMI is not set
-# CONFIG_SERIO_I8042 is not set
-# CONFIG_SERIO_LIBPS2 is not set
-# CONFIG_SERIO_PCIPS2 is not set
-# CONFIG_SERIO_RAW is not set
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SGI_IP22 is not set
-# CONFIG_SGI_IP27 is not set
-# CONFIG_SGI_IP28 is not set
-# CONFIG_SGI_IP32 is not set
-# CONFIG_SIBYTE_BIGSUR is not set
-# CONFIG_SIBYTE_CARMEL is not set
-# CONFIG_SIBYTE_CRHINE is not set
-# CONFIG_SIBYTE_CRHONE is not set
-# CONFIG_SIBYTE_LITTLESUR is not set
-# CONFIG_SIBYTE_RHONE is not set
-# CONFIG_SIBYTE_SENTOSA is not set
-# CONFIG_SIBYTE_SWARM is not set
-# CONFIG_SLAB is not set
-# CONFIG_SLOW_WORK is not set
-CONFIG_SLUB=y
-CONFIG_SOFT_WATCHDOG=m
-CONFIG_SWAP_IO_SPACE=y
-CONFIG_SYS_HAS_CPU_MIPS32_R1=y
-CONFIG_SYS_HAS_EARLY_PRINTK=y
-CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
-CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
-CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
-CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
-CONFIG_TMPFS_POSIX_ACL=y
-CONFIG_TRACING_SUPPORT=y
-CONFIG_TRAD_SIGNALS=y
-CONFIG_USB=m
-CONFIG_USB_ADM5120_HCD=m
-CONFIG_USB_DEBUG=y
-CONFIG_USB_EHCI_HCD=m
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_HCD=m
-CONFIG_USB_SUPPORT=y
-# CONFIG_USB_UHCI_HCD is not set
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_ZONE_DMA_FLAG=0
diff --git a/target/linux/adm5120/router_le/config-2.6.30 b/target/linux/adm5120/router_le/config-2.6.30
deleted file mode 100644 (file)
index ead803f..0000000
+++ /dev/null
@@ -1,260 +0,0 @@
-CONFIG_32BIT=y
-# CONFIG_64BIT is not set
-CONFIG_ADM5120=y
-CONFIG_ADM5120_ENET=y
-CONFIG_ADM5120_MACH_5GXI=y
-CONFIG_ADM5120_MACH_BR_6104K=y
-CONFIG_ADM5120_MACH_BR_6104KP=y
-CONFIG_ADM5120_MACH_BR_61X4WG=y
-CONFIG_ADM5120_MACH_CAS_771=y
-CONFIG_ADM5120_MACH_EASY5120P_ATA=y
-CONFIG_ADM5120_MACH_EASY5120_RT=y
-CONFIG_ADM5120_MACH_EASY5120_WVOIP=y
-CONFIG_ADM5120_MACH_EASY83000=y
-CONFIG_ADM5120_MACH_NFS_101=y
-CONFIG_ADM5120_MACH_NP27G=y
-CONFIG_ADM5120_MACH_NP28G=y
-CONFIG_ADM5120_MACH_PMUGW=y
-CONFIG_ADM5120_MACH_RB_11X=y
-CONFIG_ADM5120_MACH_RB_133=y
-CONFIG_ADM5120_MACH_RB_133C=y
-CONFIG_ADM5120_MACH_RB_150=y
-CONFIG_ADM5120_MACH_RB_153=y
-CONFIG_ADM5120_MACH_RB_192=y
-CONFIG_ADM5120_MACH_WP54=y
-CONFIG_ADM5120_OEM_CELLVISION=y
-CONFIG_ADM5120_OEM_COMPEX=y
-CONFIG_ADM5120_OEM_EDIMAX=y
-CONFIG_ADM5120_OEM_INFINEON=y
-CONFIG_ADM5120_OEM_MIKROTIK=y
-CONFIG_ADM5120_OEM_MOTOROLA=y
-CONFIG_ADM5120_OEM_OSBRIDGE=y
-# CONFIG_ADM5120_OEM_ZYXEL is not set
-CONFIG_ADM5120_SOC_BGA=y
-CONFIG_ADM5120_WDT=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-CONFIG_ARCH_SUPPORTS_OPROFILE=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_ARM_AMBA=y
-CONFIG_ATA=m
-# CONFIG_BCM47XX is not set
-# CONFIG_BINARY_PRINTF is not set
-CONFIG_BITREVERSE=y
-# CONFIG_CAVIUM_OCTEON_REFERENCE_BOARD is not set
-# CONFIG_CAVIUM_OCTEON_SIMULATOR is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_CEVT_R4K=y
-CONFIG_CEVT_R4K_LIB=y
-CONFIG_CMDLINE="console=ttyS0,115200 rootfstype=squashfs,yaffs2,jffs2"
-# CONFIG_CPU_BIG_ENDIAN is not set
-# CONFIG_CPU_CAVIUM_OCTEON is not set
-CONFIG_CPU_HAS_LLSC=y
-CONFIG_CPU_HAS_PREFETCH=y
-CONFIG_CPU_HAS_SYNC=y
-CONFIG_CPU_LITTLE_ENDIAN=y
-# CONFIG_CPU_LOONGSON2 is not set
-CONFIG_CPU_MIPS32=y
-CONFIG_CPU_MIPS32_R1=y
-# CONFIG_CPU_MIPS32_R2 is not set
-# CONFIG_CPU_MIPS64_R1 is not set
-# CONFIG_CPU_MIPS64_R2 is not set
-CONFIG_CPU_MIPSR1=y
-# CONFIG_CPU_NEVADA is not set
-# CONFIG_CPU_R10000 is not set
-# CONFIG_CPU_R3000 is not set
-# CONFIG_CPU_R4300 is not set
-# CONFIG_CPU_R4X00 is not set
-# CONFIG_CPU_R5000 is not set
-# CONFIG_CPU_R5432 is not set
-# CONFIG_CPU_R5500 is not set
-# CONFIG_CPU_R6000 is not set
-# CONFIG_CPU_R8000 is not set
-# CONFIG_CPU_RM7000 is not set
-# CONFIG_CPU_RM9000 is not set
-# CONFIG_CPU_SB1 is not set
-CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_HIGHMEM=y
-# CONFIG_CPU_TX39XX is not set
-# CONFIG_CPU_TX49XX is not set
-# CONFIG_CPU_VR41XX is not set
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_AES=m
-CONFIG_CRYPTO_ARC4=m
-CONFIG_CRYPTO_BLKCIPHER=m
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_HASH=m
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_MANAGER=m
-CONFIG_CRYPTO_MANAGER2=y
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_WORKQUEUE=y
-CONFIG_CSRC_R4K=y
-CONFIG_CSRC_R4K_LIB=y
-CONFIG_DECOMPRESS_LZMA=y
-CONFIG_DEVPORT=y
-# CONFIG_DM9000 is not set
-CONFIG_DMA_NEED_PCI_MAP_STATE=y
-CONFIG_DMA_NONCOHERENT=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_ELF_CORE=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_FS_POSIX_ACL=y
-CONFIG_GENERIC_ACL=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_GPIOLIB=y
-CONFIG_GPIO_SYSFS=y
-# CONFIG_HAMRADIO is not set
-CONFIG_HARDWARE_WATCHPOINTS=y
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-CONFIG_HAVE_IDE=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HID=m
-CONFIG_HID_SUPPORT=y
-CONFIG_HOSTAP=m
-CONFIG_HOSTAP_FIRMWARE=y
-# CONFIG_HOSTAP_FIRMWARE_NVRAM is not set
-CONFIG_HOSTAP_PCI=m
-CONFIG_HW_HAS_PCI=y
-CONFIG_HW_RANDOM=y
-CONFIG_HZ=250
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-CONFIG_IMAGE_CMDLINE_HACK=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-CONFIG_INPUT=m
-# CONFIG_INPUT_GPIO_BUTTONS is not set
-# CONFIG_INPUT_YEALINK is not set
-CONFIG_IRQ_CPU=y
-CONFIG_KEXEC=y
-CONFIG_LEDS_GPIO=m
-CONFIG_LEDS_TRIGGER_ADM5120_SWITCH=m
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_LEMOTE_FULONG is not set
-CONFIG_LIB80211=m
-CONFIG_LIB80211_CRYPT_CCMP=m
-CONFIG_LIB80211_CRYPT_TKIP=m
-CONFIG_LIB80211_CRYPT_WEP=m
-# CONFIG_MACH_ALCHEMY is not set
-# CONFIG_MACH_DECSTATION is not set
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_MACH_TX39XX is not set
-# CONFIG_MACH_TX49XX is not set
-# CONFIG_MACH_VR41XX is not set
-CONFIG_MII=m
-# CONFIG_MIKROTIK_RB532 is not set
-CONFIG_MIPS=y
-# CONFIG_MIPS_COBALT is not set
-CONFIG_MIPS_L1_CACHE_SHIFT=5
-CONFIG_MIPS_MACHINE=y
-# CONFIG_MIPS_MALTA is not set
-CONFIG_MIPS_MT_DISABLED=y
-# CONFIG_MIPS_MT_SMP is not set
-# CONFIG_MIPS_MT_SMTC is not set
-# CONFIG_MIPS_SIM is not set
-CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_MTD_ADM5120=y
-CONFIG_MTD_CFI_FIXUP_MACRONIX_BOOTLOC=y
-# CONFIG_MTD_CFI_INTELEXT is not set
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_MYLOADER_PARTS=y
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_PLATFORM=y
-CONFIG_MTD_TRXSPLIT=y
-CONFIG_NO_HZ=y
-# CONFIG_NO_IOPORT is not set
-# CONFIG_NXP_STB220 is not set
-# CONFIG_NXP_STB225 is not set
-CONFIG_PAGEFLAGS_EXTENDED=y
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_PCI=y 
-CONFIG_PATA_RB153_CF=m
-CONFIG_PCI_DISABLE_COMMON_QUIRKS=y
-CONFIG_PCI_DOMAINS=y
-# CONFIG_PMC_MSP is not set
-# CONFIG_PMC_YOSEMITE is not set
-# CONFIG_PNX8550_JBS is not set
-# CONFIG_PNX8550_STB810 is not set
-# CONFIG_PROBE_INITRD_HEADER is not set
-CONFIG_SCHED_OMIT_FRAME_POINTER=y
-CONFIG_SCSI=m
-# CONFIG_SERIAL_8250 is not set
-CONFIG_SERIAL_AMBA_PL010=y
-CONFIG_SERIAL_AMBA_PL010_CONSOLE=y
-CONFIG_SERIAL_AMBA_PL010_NUMPORTS=2
-CONFIG_SERIAL_AMBA_PL010_PORTNAME="ttyS"
-# CONFIG_SERIAL_AMBA_PL011 is not set
-CONFIG_SERIO=y
-# CONFIG_SERIO_AMBAKMI is not set
-# CONFIG_SERIO_I8042 is not set
-# CONFIG_SERIO_LIBPS2 is not set
-# CONFIG_SERIO_PCIPS2 is not set
-# CONFIG_SERIO_RAW is not set
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SGI_IP22 is not set
-# CONFIG_SGI_IP27 is not set
-# CONFIG_SGI_IP28 is not set
-# CONFIG_SGI_IP32 is not set
-# CONFIG_SIBYTE_BIGSUR is not set
-# CONFIG_SIBYTE_CARMEL is not set
-# CONFIG_SIBYTE_CRHINE is not set
-# CONFIG_SIBYTE_CRHONE is not set
-# CONFIG_SIBYTE_LITTLESUR is not set
-# CONFIG_SIBYTE_RHONE is not set
-# CONFIG_SIBYTE_SENTOSA is not set
-# CONFIG_SIBYTE_SWARM is not set
-# CONFIG_SLAB is not set
-# CONFIG_SLOW_WORK is not set
-CONFIG_SLUB=y
-CONFIG_SOFT_WATCHDOG=m
-# CONFIG_SWAP is not set
-CONFIG_SYS_HAS_CPU_MIPS32_R1=y
-CONFIG_SYS_HAS_EARLY_PRINTK=y
-CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
-CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
-CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
-CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
-# CONFIG_TC35815 is not set
-CONFIG_TMPFS_POSIX_ACL=y
-CONFIG_TRACING_SUPPORT=y
-CONFIG_TRAD_SIGNALS=y
-CONFIG_USB=m
-CONFIG_USB_ADM5120_HCD=m
-CONFIG_USB_EHCI_HCD=m
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_HCD=m
-CONFIG_USB_SUPPORT=y
-# CONFIG_USB_UHCI_HCD is not set
-CONFIG_VLAN_8021Q=m
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_YAFFS_9BYTE_TAGS=y
-# CONFIG_YAFFS_ALWAYS_CHECK_CHUNK_ERASED is not set
-CONFIG_YAFFS_AUTO_YAFFS2=y
-# CONFIG_YAFFS_DISABLE_LAZY_LOAD is not set
-# CONFIG_YAFFS_DISABLE_WIDE_TNODES is not set
-CONFIG_YAFFS_FS=y
-CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y
-CONFIG_YAFFS_YAFFS1=y
-CONFIG_YAFFS_YAFFS2=y
-CONFIG_ZONE_DMA_FLAG=0