target/linux/ramips/dts/kng_rc.dts

   1 /dts-v1/;
   2
   3 #include "mt7620a.dtsi"
   4
   5 #include <dt-bindings/gpio/gpio.h>
   6 #include <dt-bindings/input/input.h>
   7
   8 / {
   9         model = "ZyXEL Keenetic Viva";
  10
  11         gpio-leds {
  12                 compatible = "gpio-leds";
  13
  14                 wan {
  15                         label = "kng_rc:green:wan";
  16                         gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
  17                 };
  18
  19                 usb {
  20                         label = "kng_rc:green:usb";
  21                         gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
  22                 };
  23
  24                 power_alert {
  25                         label = "kng_rc:red:power";
  26                         gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
  27                 };
  28
  29                 wifi {
  30                         label = "kng_rc:green:wifi";
  31                         gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
  32                 };
  33
  34                 power {
  35                         label = "kng_rc:green:power";
  36                         gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
  37                 };
  38         };
  39
  40         gpio-keys-polled {
  41                 compatible = "gpio-keys";
  42                 #address-cells = <1>;
  43                 #size-cells = <0>;
  44                 poll-interval = <20>;
  45
  46                 reset {
  47                         label = "reset";
  48                         gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
  49                         linux,code = <KEY_RESTART>;
  50                 };
  51
  52                 wps {
  53                         label = "wps";
  54                         gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
  55                         linux,code = <KEY_WPS_BUTTON>;
  56                 };
  57
  58                 fn {
  59                         label = "fn";
  60                         gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
  61                         linux,code = <BTN_0>;
  62                 };
  63         };
  64
  65         rtl8367rb {
  66                 compatible = "realtek,rtl8367b";
  67                 cpu_port = <7>;
  68                 realtek,extif2 = <1 0 1 1 1 1 1 1 2>;
  69                 mdio = <&mdio0>;
  70         };
  71 };
  72
  73 &spi0 {
  74         status = "okay";
  75
  76         m25p80@0 {
  77                 #address-cells = <1>;
  78                 #size-cells = <1>;
  79                 compatible = "jedec,spi-nor";
  80                 reg = <0>;
  81                 spi-max-frequency = <10000000>;
  82
  83                 partition@0 {
  84                         label = "u-boot";
  85                         reg = <0x0 0x30000>;
  86                         read-only;
  87                 };
  88
  89                 partition@30000 {
  90                         label = "u-boot-env";
  91                         reg = <0x30000 0x10000>;
  92                         read-only;
  93                 };
  94
  95                 factory: partition@40000 {
  96                         label = "factory";
  97                         reg = <0x40000 0x10000>;
  98                         read-only;
  99                 };
 100
 101                 partition@50000 {
 102                         label = "firmware";
 103                         reg = <0x50000 0xfb0000>;
 104                 };
 105         };
 106 };
 107
 108 &pinctrl {
 109         state_default: pinctrl0 {
 110                 gpio {
 111                         ralink,group = "i2c", "uartf";
 112                         ralink,function = "gpio";
 113                 };
 114         };
 115 };
 116
 117 &ethernet {
 118         status = "okay";
 119         pinctrl-names = "default";
 120         pinctrl-0 = <&rgmii2_pins &mdio_pins>;
 121         mtd-mac-address = <&factory 0x00004>;
 122
 123         port@4 {
 124                 status = "okay";
 125                 mediatek,fixed-link = <1000 1 1 1>;
 126                 phy-mode = "rgmii";
 127                 phy-handle = <&phy4>;
 128         };
 129
 130         mdio0: mdio-bus {
 131                 status = "okay";
 132
 133                 phy4: ethernet-phy@4 {
 134                         reg = <4>;
 135                         phy-mode = "rgmii";
 136                 };
 137         };
 138 };
 139
 140 &gsw {
 141         mediatek,port4 = "gmac";
 142 };
 143
 144 &wmac {
 145         ralink,mtd-eeprom = <&factory 0>;
 146 };
 147
 148 &ehci {
 149         status = "okay";
 150 };
 151
 152 &ohci {
 153         status = "okay";
 154 };