target/linux/ramips/dts/NA930.dts

   1 /dts-v1/;
   2
   3 /include/ "mt7620a.dtsi"
   4
   5 / {
   6         compatible = "ralink,mt7620a-eval-board", "ralink,mt7620a-soc";
   7         model = "Sercomm NA930";
   8
   9         chosen {
  10                 bootargs = "console=ttyS1,57600";
  11         };
  12
  13         pinctrl {
  14                 state_default: pinctrl0 {
  15                         gpio {
  16                                 ralink,group = "i2c", "rgmii2", "spi", "ephy";
  17                                 ralink,function = "gpio";
  18                         };
  19                         uartf_gpio {
  20                                 ralink,group = "uartf";
  21                                 ralink,function = "gpio uartf";
  22                         };
  23                 };
  24         };
  25
  26         palmbus@10000000 {
  27                 uart@500 {
  28                         status = "okay";
  29                 };
  30
  31                 gpio@638 {
  32                         status = "okay";
  33                 };
  34
  35                 gpio@660 {
  36                         status = "okay";
  37                 };
  38         };
  39
  40         nand {
  41                 #address-cells = <1>;
  42                 #size-cells = <1>;
  43                 compatible = "mtk,mt7620-nand";
  44                 partition@0 {
  45                         label = "u-boot";
  46                         reg = <0x0 0x20000>;
  47                         read-only;
  48                 };
  49                 partition@200000 {
  50                         label = "factory";
  51                         reg = <0x200000 0x40000>;
  52                         read-only;
  53                 };
  54                 partition@240000 {
  55                         label = "Config";
  56                         reg = <0x240000 0x400000>;
  57                         read-only;
  58                 };
  59                 partition@640000 {
  60                         label = "firmware";
  61                         reg = <0x640000 0x1400000>;
  62                 };
  63         };
  64
  65         ethernet@10100000 {
  66                 status = "okay";
  67
  68                 pinctrl-names = "default";
  69                 pinctrl-0 = <&rgmii1_pins &mdio_pins>;
  70
  71                 ralink,port-map = "llllw";
  72
  73                 port@4 {
  74                         status = "okay";
  75                         phy-handle = <&phy4>;
  76                         phy-mode = "rgmii";
  77                 };
  78
  79                 port@5 {
  80                         status = "okay";
  81                         phy-handle = <&phy5>;
  82                         phy-mode = "rgmii";
  83                 };
  84
  85                 mdio-bus {
  86                         status = "okay";
  87
  88                         phy4: ethernet-phy@4 {
  89                                 reg = <4>;
  90                                 phy-mode = "rgmii";
  91                         };
  92
  93                         phy5: ethernet-phy@5 {
  94                                 reg = <5>;
  95                                 phy-mode = "rgmii";
  96                         };
  97                 };
  98         };
  99
 100         gpio-keys-polled {
 101                 compatible = "gpio-keys-polled";
 102                 #address-cells = <1>;
 103                 #size-cells = <0>;
 104                 poll-interval = <20>;
 105                 reset {
 106                         label = "reset";
 107                         gpios = <&gpio0 11 1>;
 108                         linux,code = <0x198>;
 109                 };
 110                 zwave {
 111                         label = "zwave";
 112                         gpios = <&gpio0 12 1>;
 113                         linux,code = <0x100>;
 114                 };
 115                 wps {
 116                         label = "wps";
 117                         gpios = <&gpio0 14 1>;
 118                         linux,code = <0x211>;
 119                 };
 120         };
 121
 122         gpio-leds {
 123                 compatible = "gpio-leds";
 124                 zwave {
 125                         label = "na930:blue:zwave";
 126                         gpios = <&gpio2 0 1>;
 127                 };
 128                 status {
 129                         label = "na930:blue:status";
 130                         gpios = <&gpio2 26 1>;
 131                 };
 132                 service {
 133                         label = "na930:blue:service";
 134                         gpios = <&gpio2 28 1>;
 135                 };
 136                 power {
 137                         label = "na930:blue:power";
 138                         gpios = <&gpio2 29 1>;
 139                 };
 140         };
 141
 142         gpio_export {
 143                 compatible = "gpio-export";
 144                 #size-cells = <0>;
 145
 146                 telit {
 147                         gpio-export,name = "telit";
 148                         gpio-export,output = <1>;
 149                         gpios = <&gpio0 13 0>;
 150                 };
 151         };
 152
 153         gsw@10110000 {
 154                 ralink,port4 = "gmac";
 155         };
 156
 157         ehci@101c0000 {
 158                 status = "okay";
 159         };
 160
 161         ohci@101c1000 {
 162                 status = "okay";
 163         };
 164 };