target/linux/ramips/dts/MIWIFI-NANO.dts

   1 /dts-v1/;
   2
   3 #include "mt7628an.dtsi"
   4
   5 #include <dt-bindings/gpio/gpio.h>
   6 #include <dt-bindings/input/input.h>
   7
   8 / {
   9         compatible = "xiaomi,MiWifi Nano", "mediatek,mt7628an-soc";
  10         model = "MiWiFi Nano";
  11
  12         chosen {
  13                 bootargs = "console=ttyS0,115200";
  14         };
  15
  16         memory@0 {
  17                 device_type = "memory";
  18                 reg = <0x0 0x4000000>;
  19         };
  20
  21         gpio-leds {
  22                 compatible = "gpio-leds";
  23
  24                 status_blue {
  25                         label = "miwifi-nano:blue:status";
  26                         gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
  27                 };
  28                 status_red {
  29                         label = "miwifi-nano:red:status";
  30                         gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
  31                 };
  32                 status_amber {
  33                         label = "miwifi-nano:amber:status";
  34                         gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
  35                 };
  36         };
  37
  38         gpio-keys {
  39                 compatible = "gpio-keys-polled";
  40                 #address-cells = <1>;
  41                 #size-cells = <0>;
  42                 poll-interval = <20>;
  43
  44                 reset {
  45                         label = "reset";
  46                         gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
  47                         linux,code = <KEY_RESTART>;
  48                 };
  49         };
  50 };
  51
  52 &pinctrl {
  53         state_default: pinctrl0 {
  54                 gpio {
  55                         ralink,group = "refclk", "wled_an", "gpio";
  56                         ralink,function = "gpio";
  57                 };
  58         };
  59 };
  60
  61 &wmac {
  62         status = "okay";
  63         ralink,mtd-eeprom = <&factory 0x4>;
  64 };
  65
  66 &ethernet {
  67         mtd-mac-address = <&factory 0x28>;
  68 };
  69
  70 &spi0 {
  71         status = "okay";
  72
  73         m25p80@0 {
  74                 #address-cells = <1>;
  75                 #size-cells = <1>;
  76                 compatible = "jedec,spi-nor";
  77                 reg = <0>;
  78                 linux,modalias = "m25p80";
  79                 spi-max-frequency = <10000000>;
  80                 m25p,chunked-io = <32>;
  81
  82                 partition@0 {
  83                         label = "u-boot";
  84                         reg = <0x0 0x30000>;
  85                         read-only;
  86                 };
  87
  88                 partition@30000 {
  89                         label = "u-boot-env";
  90                         reg = <0x30000 0x10000>;
  91                         read-only;
  92                 };
  93
  94                 factory: partition@40000 {
  95                         label = "factory";
  96                         reg = <0x40000 0x10000>;
  97                         read-only;
  98                 };
  99
 100                 partition@50000 {
 101                         label = "firmware";
 102                         reg = <0x50000 0x7b0000>;
 103                 };
 104         };
 105 };