target/linux/ramips/dts/AIR3GII.dts

   1 /dts-v1/;
   2
   3 #include "rt5350.dtsi"
   4
   5 #include <dt-bindings/input/input.h>
   6
   7 / {
   8         compatible = "AIR3GII", "ralink,rt5350-soc";
   9         model = "AirLive Air3GII";
  10
  11         gpio-leds {
  12                 compatible = "gpio-leds";
  13
  14                 wlan {
  15                         label = "air3gii:green:wlan";
  16                         gpios = <&gpio0 8 0>;
  17                 };
  18
  19                 mobile {
  20                         label = "air3gii:green:mobile";
  21                         gpios = <&gpio0 9 1>;
  22                 };
  23         };
  24
  25         gpio-keys-polled {
  26                 compatible = "gpio-keys-polled";
  27                 #address-cells = <1>;
  28                 #size-cells = <0>;
  29                 poll-interval = <20>;
  30
  31                 wps {
  32                         label = "wps";
  33                         gpios = <&gpio0 7 1>;
  34                         linux,code = <KEY_WPS_BUTTON>;
  35                 };
  36         };
  37 };
  38
  39 &gpio0 {
  40         status = "okay";
  41 };
  42
  43 &spi0 {
  44         status = "okay";
  45
  46         m25p80@0 {
  47                 #address-cells = <1>;
  48                 #size-cells = <1>;
  49                 compatible = "jedec,spi-nor";
  50                 reg = <0>;
  51                 linux,modalias = "m25p80", "en25q32b";
  52                 spi-max-frequency = <10000000>;
  53
  54                 partition@0 {
  55                         label = "u-boot";
  56                         reg = <0x0 0x30000>;
  57                         read-only;
  58                 };
  59
  60                 partition@30000 {
  61                         label = "u-boot-env";
  62                         reg = <0x30000 0x10000>;
  63                         read-only;
  64                 };
  65
  66                 factory: partition@40000 {
  67                         label = "factory";
  68                         reg = <0x40000 0x10000>;
  69                         read-only;
  70                 };
  71
  72                 partition@50000 {
  73                         label = "firmware";
  74                         reg = <0x50000 0x3b0000>;
  75                 };
  76         };
  77 };
  78
  79 &pinctrl {
  80         state_default: pinctrl0 {
  81                 gpio {
  82                         ralink,group = "i2c", "jtag", "uartf";
  83                         ralink,function = "gpio";
  84                 };
  85         };
  86 };
  87
  88 &ethernet {
  89         mtd-mac-address = <&factory 0x4>;
  90 };
  91
  92 &esw {
  93         mediatek,portmap = <0x2f>;
  94 };
  95
  96 &wmac {
  97         ralink,mtd-eeprom = <&factory 0>;
  98 };