target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_avm_fritz7490.dtsi

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2
   3 #include "vr9_avm_fritzxx90.dtsi"
   4
   5 / {
   6         compatible = "avm,fritz7490", "lantiq,xway", "lantiq,vr9";
   7         model = "AVM FRITZ!Box 7490";
   8 };
   9
  10 &aliases {
  11         led-dsl = &led_info_green;
  12         led-internet = &led_internet;
  13         led-wifi = &led_wifi;
  14 };
  15
  16 &leds {
  17         led_internet: internet {
  18                 label = "green:internet";
  19                 gpios = <&gpio 47 GPIO_ACTIVE_LOW>;
  20         };
  21
  22         led_fon: fon {
  23                 label = "green:fon";
  24                 gpios = <&gpio 36 GPIO_ACTIVE_LOW>;
  25         };
  26
  27         led_wifi: wifi {
  28                 label = "green:wlan";
  29                 gpios = <&gpio 35 GPIO_ACTIVE_LOW>;
  30         };
  31 };
  32
  33 &gswip_mdio {
  34         phy0: ethernet-phy@0 {
  35                 reg = <0x00>;
  36                 reset-gpios = <&gpio 32 GPIO_ACTIVE_LOW>;
  37         };
  38
  39         phy1: ethernet-phy@1 {
  40                 reg = <0x01>;
  41                 reset-gpios = <&gpio 44 GPIO_ACTIVE_LOW>;
  42         };
  43
  44         phy11: ethernet-phy@11 {
  45                 reg = <0x11>;
  46         };
  47
  48         phy13: ethernet-phy@13 {
  49                 reg = <0x13>;
  50         };
  51 };
  52
  53 &gswip_ports {
  54         port@0 {
  55                 reg = <0>;
  56                 label = "lan3";
  57                 phy-mode = "rgmii-rxid";
  58                 phy-handle = <&phy0>;
  59         };
  60
  61         port@1 {
  62                 reg = <1>;
  63                 label = "lan4";
  64                 phy-mode = "rgmii-rxid";
  65                 phy-handle = <&phy1>;
  66         };
  67
  68         port@2 {
  69                 reg = <2>;
  70                 label = "lan2";
  71                 phy-mode = "internal";
  72                 phy-handle = <&phy11>;
  73         };
  74
  75         port@4 {
  76                 reg = <4>;
  77                 label = "lan1";
  78                 phy-mode = "internal";
  79                 phy-handle = <&phy13>;
  80         };
  81 };