target/linux/lantiq/dts/TDW89X0.dtsi

   1 /include/ "vr9.dtsi"
   2
   3 / {
   4         chosen {
   5                 bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";
   6
   7                 leds {
   8                         /* the power led can't be controlled, use the wps led instead */
   9                         boot = &wps;
  10                         failsafe = &wps;
  11
  12                         dsl = &dsl;
  13                         internet = &internet;
  14                         usb = &usb0;
  15                         usb2 = &usb2;
  16                 };
  17         };
  18
  19         memory@0 {
  20                 reg = <0x0 0x4000000>;
  21         };
  22
  23         fpi@10000000 {
  24                 gpio: pinmux@E100B10 {
  25                         pinctrl-names = "default";
  26                         pinctrl-0 = <&state_default>;
  27
  28                         state_default: pinmux {
  29                                 mdio {
  30                                         lantiq,groups = "mdio";
  31                                         lantiq,function = "mdio";
  32                                 };
  33                                 gphy-leds {
  34                                         lantiq,groups = "gphy0 led1", "gphy1 led1";
  35                                         lantiq,function = "gphy";
  36                                         lantiq,pull = <2>;
  37                                         lantiq,open-drain = <0>;
  38                                         lantiq,output = <1>;
  39                                 };
  40                                 phy-rst {
  41                                         lantiq,pins = "io42";
  42                                         lantiq,pull = <0>;
  43                                         lantiq,open-drain = <0>;
  44                                         lantiq,output = <1>;
  45                                 };
  46                                 pcie-rst {
  47                                         lantiq,pins = "io38";
  48                                         lantiq,pull = <0>;
  49                                         lantiq,output = <1>;
  50                                 };
  51                         };
  52                         pins_spi_default: pins_spi_default {
  53                                 spi_in {
  54                                         lantiq,groups = "spi_di";
  55                                         lantiq,function = "spi";
  56                                 };
  57                                 spi_out {
  58                                         lantiq,groups = "spi_do", "spi_clk",
  59                                                 "spi_cs4";
  60                                         lantiq,function = "spi";
  61                                         lantiq,output = <1>;
  62                                 };
  63                         };
  64                 };
  65
  66                 eth@E108000 {
  67                         #address-cells = <1>;
  68                         #size-cells = <0>;
  69                         compatible = "lantiq,xrx200-net";
  70                         reg = < 0xE108000 0x3000 /* switch */
  71                                 0xE10B100 0x70 /* mdio */
  72                                 0xE10B1D8 0x30 /* mii */
  73                                 0xE10B308 0x30 /* pmac */
  74                         >;
  75                         interrupt-parent = <&icu0>;
  76                         interrupts = <73 72>;
  77
  78                         lan: interface@0 {
  79                                 compatible = "lantiq,xrx200-pdi";
  80                                 #address-cells = <1>;
  81                                 #size-cells = <0>;
  82                                 reg = <0>;
  83                                 mtd-mac-address = <&ath9k_cal 0xf100>;
  84                                 lantiq,switch;
  85
  86                                 ethernet@0 {
  87                                         compatible = "lantiq,xrx200-pdi-port";
  88                                         reg = <0>;
  89                                         phy-mode = "rgmii";
  90                                         phy-handle = <&phy0>;
  91                                         // gpios = <&gpio 42 1>;
  92                                 };
  93                                 ethernet@5 {
  94                                         compatible = "lantiq,xrx200-pdi-port";
  95                                         reg = <5>;
  96                                         phy-mode = "rgmii";
  97                                         phy-handle = <&phy5>;
  98                                 };
  99                                 ethernet@2 {
 100                                         compatible = "lantiq,xrx200-pdi-port";
 101                                         reg = <2>;
 102                                         phy-mode = "gmii";
 103                                         phy-handle = <&phy11>;
 104                                 };
 105                                 ethernet@3 {
 106                                         compatible = "lantiq,xrx200-pdi-port";
 107                                         reg = <4>;
 108                                         phy-mode = "gmii";
 109                                         phy-handle = <&phy13>;
 110                                 };
 111                         };
 112
 113                         mdio@0 {
 114                                 #address-cells = <1>;
 115                                 #size-cells = <0>;
 116                                 compatible = "lantiq,xrx200-mdio";
 117                                 phy0: ethernet-phy@0 {
 118                                         reg = <0x0>;
 119                                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 120                                 };
 121                                 phy5: ethernet-phy@5 {
 122                                         reg = <0x5>;
 123                                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 124                                 };
 125                                 phy11: ethernet-phy@11 {
 126                                         reg = <0x11>;
 127                                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 128                                 };
 129                                 phy13: ethernet-phy@13 {
 130                                         reg = <0x13>;
 131                                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 132                                 };
 133                         };
 134                 };
 135
 136                 ifxhcd@E101000 {
 137                         status = "okay";
 138                         gpios = <&gpio 33 0>;
 139                         lantiq,portmask = <0x3>;
 140                 };
 141
 142                 ifxhcd@E106000 {
 143                         status = "okay";
 144                         gpios = <&gpio 33 0>;
 145                 };
 146         };
 147
 148         gphy-xrx200 {
 149                 compatible = "lantiq,phy-xrx200";
 150                 firmware = "lantiq/vr9_phy11g_a2x.bin";
 151                 phys = [ 00 01 ];
 152         };
 153
 154         ath9k_eep {
 155                 compatible = "ath9k,eeprom";
 156                 ath,eep-flash = <&ath9k_cal 0x21000>;
 157                 ath,mac-offset = <0xf100>;
 158                 ath,mac-increment;
 159                 ath,led-pin = <0>;
 160                 ath,disable-5ghz;
 161                 ath,led-active-high;
 162         };
 163
 164         gpio-keys-polled {
 165                 compatible = "gpio-keys-polled";
 166                 #address-cells = <1>;
 167                 #size-cells = <0>;
 168                 poll-interval = <100>;
 169                 reset {
 170                         label = "reset";
 171                         gpios = <&gpio 0 1>;
 172                         linux,code = <0x198>;
 173                 };
 174
 175                 wifi {
 176                         label = "wifi";
 177                         gpios = <&gpio 9 0>;
 178                         linux,code = <0xf7>;
 179                         linux,input-type = <5>; /* EV_SW */
 180                 };
 181
 182                 wps {
 183                         label = "wps";
 184                         gpios = <&gpio 39 1>;
 185                         linux,code = <0x211>;
 186                 };
 187         };
 188
 189         gpio-leds {
 190                 compatible = "gpio-leds";
 191                 /*
 192                         power is not controllable via gpio
 193         */
 194                 dsl: dsl {
 195                         label = "tdw89x0:green:dsl";
 196                         gpios = <&gpio 4 0>;
 197                 };
 198                 internet: internet {
 199                         label = "tdw89x0:green:internet";
 200                         gpios = <&gpio 5 0>;
 201                 };
 202                 usb0: usb0 {
 203                         label = "tdw89x0:green:usb";
 204                         gpios = <&gpio 19 0>;
 205                 };
 206                 usb2: usb2 {
 207                         label = "tdw89x0:green:usb2";
 208                         gpios = <&gpio 20 0>;
 209                 };
 210                 wps: wps {
 211                         label = "tdw89x0:green:wps";
 212                         gpios = <&gpio 37 0>;
 213                 };
 214         };
 215 };
 216
 217 &spi {
 218         pinctrl-names = "default";
 219         pinctrl-0 = <&pins_spi_default>;
 220
 221         status = "ok";
 222
 223         m25p80@4 {
 224                 #address-cells = <1>;
 225                 #size-cells = <1>;
 226                 compatible = "jedec,spi-nor";
 227                 reg = <4 0>;
 228                 spi-max-frequency = <33250000>;
 229                 m25p,fast-read;
 230
 231                 partition@0 {
 232                         reg = <0x0 0x20000>;
 233                         label = "u-boot";
 234                         read-only;
 235                 };
 236
 237                 partition@20000 {
 238                         reg = <0x20000 0x7a0000>;
 239                         label = "firmware";
 240                 };
 241
 242                 partition@7c0000 {
 243                         reg = <0x7c0000 0x10000>;
 244                         label = "config";
 245                         read-only;
 246                 };
 247
 248                 ath9k_cal: partition@7d0000 {
 249                         reg = <0x7d0000 0x30000>;
 250                         label = "boardconfig";
 251                         read-only;
 252                 };
 253         };
 254 };