target/linux/lantiq/dts/TDW89X0.dtsi

   1 /include/ "vr9.dtsi"
   2
   3 / {
   4         chosen {
   5                 bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";
   6
   7                 leds {
   8                         dsl = &dsl;
   9                         internet = &internet;
  10                         /* the power led can't be controlled, use the wps led instead */
  11                         power = &wps;
  12                         usb = &usb0;
  13                         usb2 = &usb2;
  14                 };
  15         };
  16
  17         memory@0 {
  18                 reg = <0x0 0x4000000>;
  19         };
  20
  21         fpi@10000000 {
  22                 spi@E100800 {
  23                         compatible = "lantiq,spi-xway";
  24                         reg = <0xE100800 0x100>;
  25                         interrupt-parent = <&icu0>;
  26                         interrupts = <22 23 24>;
  27                         #address-cells = <1>;
  28                         #size-cells = <1>;
  29                         m25p80@0 {
  30                                 #address-cells = <1>;
  31                                 #size-cells = <1>;
  32                                 compatible = "jedec,spi-nor";
  33                                 reg = <3 0>;
  34                                 spi-max-frequency = <33250000>;
  35                                 m25p,fast-read;
  36
  37                                 partition@0 {
  38                                         reg = <0x0 0x20000>;
  39                                         label = "u-boot";
  40                                         read-only;
  41                                 };
  42
  43                                 partition@20000 {
  44                                         reg = <0x20000 0x7a0000>;
  45                                         label = "firmware";
  46                                 };
  47
  48                                 partition@7c0000 {
  49                                         reg = <0x7c0000 0x10000>;
  50                                         label = "config";
  51                                         read-only;
  52                                 };
  53
  54                                 ath9k_cal: partition@7d0000 {
  55                                         reg = <0x7d0000 0x30000>;
  56                                         label = "boardconfig";
  57                                         read-only;
  58                                 };
  59                         };
  60                 };
  61
  62                 gpio: pinmux@E100B10 {
  63                         pinctrl-names = "default";
  64                         pinctrl-0 = <&state_default>;
  65
  66                         state_default: pinmux {
  67                                 mdio {
  68                                         lantiq,groups = "mdio";
  69                                         lantiq,function = "mdio";
  70                                 };
  71                                 gphy-leds {
  72                                         lantiq,groups = "gphy0 led1", "gphy1 led1";
  73                                         lantiq,function = "gphy";
  74                                         lantiq,pull = <2>;
  75                                         lantiq,open-drain = <0>;
  76                                         lantiq,output = <1>;
  77                                 };
  78                                 phy-rst {
  79                                         lantiq,pins = "io42";
  80                                         lantiq,pull = <0>;
  81                                         lantiq,open-drain = <0>;
  82                                         lantiq,output = <1>;
  83                                 };
  84                                 spi {
  85                                         lantiq,groups = "spi", "spi_cs4";
  86                                         lantiq,function = "spi";
  87                                 };
  88                                 pcie-rst {
  89                                         lantiq,pins = "io38";
  90                                         lantiq,pull = <0>;
  91                                         lantiq,output = <1>;
  92                                 };
  93                         };
  94                 };
  95
  96                 eth@E108000 {
  97                         #address-cells = <1>;
  98                         #size-cells = <0>;
  99                         compatible = "lantiq,xrx200-net";
 100                         reg = < 0xE108000 0x3000 /* switch */
 101                                 0xE10B100 0x70 /* mdio */
 102                                 0xE10B1D8 0x30 /* mii */
 103                                 0xE10B308 0x30 /* pmac */
 104                         >;
 105                         interrupt-parent = <&icu0>;
 106                         interrupts = <73 72>;
 107
 108                         lan: interface@0 {
 109                                 compatible = "lantiq,xrx200-pdi";
 110                                 #address-cells = <1>;
 111                                 #size-cells = <0>;
 112                                 reg = <0>;
 113                                 mtd-mac-address = <&ath9k_cal 0xf100>;
 114                                 lantiq,switch;
 115
 116                                 ethernet@0 {
 117                                         compatible = "lantiq,xrx200-pdi-port";
 118                                         reg = <0>;
 119                                         phy-mode = "rgmii";
 120                                         phy-handle = <&phy0>;
 121                                         // gpios = <&gpio 42 1>;
 122                                 };
 123                                 ethernet@5 {
 124                                         compatible = "lantiq,xrx200-pdi-port";
 125                                         reg = <5>;
 126                                         phy-mode = "rgmii";
 127                                         phy-handle = <&phy5>;
 128                                 };
 129                                 ethernet@2 {
 130                                         compatible = "lantiq,xrx200-pdi-port";
 131                                         reg = <2>;
 132                                         phy-mode = "gmii";
 133                                         phy-handle = <&phy11>;
 134                                 };
 135                                 ethernet@3 {
 136                                         compatible = "lantiq,xrx200-pdi-port";
 137                                         reg = <4>;
 138                                         phy-mode = "gmii";
 139                                         phy-handle = <&phy13>;
 140                                 };
 141                         };
 142
 143                         mdio@0 {
 144                                 #address-cells = <1>;
 145                                 #size-cells = <0>;
 146                                 compatible = "lantiq,xrx200-mdio";
 147                                 phy0: ethernet-phy@0 {
 148                                         reg = <0x0>;
 149                                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 150                                 };
 151                                 phy5: ethernet-phy@5 {
 152                                         reg = <0x5>;
 153                                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 154                                 };
 155                                 phy11: ethernet-phy@11 {
 156                                         reg = <0x11>;
 157                                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 158                                 };
 159                                 phy13: ethernet-phy@13 {
 160                                         reg = <0x13>;
 161                                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 162                                 };
 163                         };
 164                 };
 165
 166                 ifxhcd@E101000 {
 167                         status = "okay";
 168                         gpios = <&gpio 33 0>;
 169                         lantiq,portmask = <0x3>;
 170                 };
 171
 172                 ifxhcd@E106000 {
 173                         status = "okay";
 174                         gpios = <&gpio 33 0>;
 175                 };
 176         };
 177
 178         gphy-xrx200 {
 179                 compatible = "lantiq,phy-xrx200";
 180                 firmware = "lantiq/vr9_phy11g_a2x.bin";
 181                 phys = [ 00 01 ];
 182         };
 183
 184         pcie {
 185                 compatible = "lantiq,pcie-xway";
 186         };
 187
 188         ath9k_eep {
 189                 compatible = "ath9k,eeprom";
 190                 ath,eep-flash = <&ath9k_cal 0x21000>;
 191                 ath,mac-offset = <0xf100>;
 192                 ath,mac-increment;
 193                 ath,led-pin = <0>;
 194                 ath,disable-5ghz;
 195                 ath,led-active-high;
 196         };
 197
 198         gpio-keys-polled {
 199                 compatible = "gpio-keys-polled";
 200                 #address-cells = <1>;
 201                 #size-cells = <0>;
 202                 poll-interval = <100>;
 203                 reset {
 204                         label = "reset";
 205                         gpios = <&gpio 0 1>;
 206                         linux,code = <0x198>;
 207                 };
 208
 209                 wifi {
 210                         label = "wifi";
 211                         gpios = <&gpio 9 0>;
 212                         linux,code = <0xf7>;
 213                         linux,input-type = <5>; /* EV_SW */
 214                 };
 215
 216                 wps {
 217                         label = "wps";
 218                         gpios = <&gpio 39 1>;
 219                         linux,code = <0x211>;
 220                 };
 221         };
 222
 223         gpio-leds {
 224                 compatible = "gpio-leds";
 225
 226                 dsl: dsl {
 227                         label = "dsl";
 228                         gpios = <&gpio 4 0>;
 229                 };
 230                 internet: internet {
 231                         label = "internet";
 232                         gpios = <&gpio 5 0>;
 233                 };
 234                 usb0: usb0 {
 235                         label = "usb";
 236                         gpios = <&gpio 19 0>;
 237                 };
 238                 usb2: usb2 {
 239                         label = "usb2";
 240                         gpios = <&gpio 20 0>;
 241                 };
 242                 wps: wps {
 243                         label = "wps";
 244                         gpios = <&gpio 37 0>;
 245                 };
 246         };
 247 };