target/linux/lantiq/dts/FRITZ3370.dts

   1 /dts-v1/;
   2
   3 /include/ "vr9.dtsi"
   4
   5 / {
   6         model = "FRITZ3370 - Fritz!Box WLAN 3370";
   7
   8         chosen {
   9                 bootargs = "console=ttyLTQ0,115200 ubi.mtd=1,512 root=/dev/mtdblock9";
  10
  11                 leds {
  12                         dsl = &dsl;
  13                         internet = &info_green;
  14                         power = &power;
  15                         power2 = &power2;
  16                         wifi = &wifi;
  17                 };
  18         };
  19
  20         memory@0 {
  21                 reg = <0x0 0x8000000>;
  22         };
  23
  24         fpi@10000000 {
  25                 localbus@0 {
  26                         nand-parts@0 {
  27                                 compatible = "gen_nand", "lantiq,nand-xway";
  28                                 bank-width = <2>;
  29                                 reg = <1 0x0 0x2000000>;
  30                                 #address-cells = <1>;
  31                                 #size-cells = <1>;
  32
  33                                 partition@0 {
  34                                         label = "kernel";
  35                                         reg = <0x0 0x400000>;
  36                                 };
  37
  38                                 partition@400000 {
  39                                         label = "rootfs_ubi";
  40                                         reg = <0x400000 0x3000000>;
  41                                 };
  42
  43                                 partition@3400000 {
  44                                         label = "vr9_firmware";
  45                                         reg = <0x3400000 0x400000>;
  46                                 };
  47                                 partition@3800000 {
  48                                         label = "reserved";
  49                                         reg = <0x3800000 0x3000000>;
  50                                 };
  51                                 partition@6800000 {
  52                                         label = "config";
  53                                         reg = <0x6800000 0x200000>;
  54                                 };
  55                                 partition@6a00000 {
  56                                         label = "nand-filesystem";
  57                                         reg = <0x6a00000 0x1600000>;
  58                                 };
  59                         };
  60                 };
  61
  62                 gpio: pinmux@E100B10 {
  63                         pinctrl-names = "default";
  64                         pinctrl-0 = <&state_default>;
  65
  66                         state_default: pinmux {
  67                                 spi {
  68                                         lantiq,groups = "spi", "spi_cs4";
  69                                         lantiq,function = "gpio";
  70                                 };
  71                                 mdio {
  72                                         lantiq,groups = "mdio";
  73                                         lantiq,function = "mdio";
  74                                 };
  75                                 nand {
  76                                         lantiq,groups = "nand cle", "nand ale",
  77                                                         "nand rd", "nand cs1", "nand rdy";
  78                                         lantiq,function = "ebu";
  79                                         lantiq,pull = <1>;
  80                                 };
  81                                 phy-rst {
  82                                         lantiq,pins = "io37", "io44";
  83                                         lantiq,pull = <0>;
  84                                         lantiq,open-drain = <0>;
  85                                         lantiq,output = <1>;
  86                                 };
  87                                 pcie-rst {
  88                                         lantiq,pins = "io38";
  89                                         lantiq,pull = <0>;
  90                                         lantiq,output = <1>;
  91                                 };
  92                         };
  93                 };
  94
  95                 eth@E108000 {
  96                         #address-cells = <1>;
  97                         #size-cells = <0>;
  98                         compatible = "lantiq,xrx200-net";
  99                         reg = < 0xE108000 0x3000 /* switch */
 100                                 0xE10B100 0x70 /* mdio */
 101                                 0xE10B1D8 0x30 /* mii */
 102                                 0xE10B308 0x30 /* pmac */
 103                         >;
 104                         interrupt-parent = <&icu0>;
 105                         interrupts = <73 72>;
 106
 107                         lan: interface@0 {
 108                                 compatible = "lantiq,xrx200-pdi";
 109                                 #address-cells = <1>;
 110                                 #size-cells = <0>;
 111                                 reg = <0>;
 112                                 mac-address = [ 00 11 22 33 44 55 ];
 113                                 lantiq,switch;
 114
 115                                 ethernet@0 {
 116                                         compatible = "lantiq,xrx200-pdi-port";
 117                                         reg = <0>;
 118                                         phy-mode = "rgmii";
 119                                         phy-handle = <&phy0>;
 120                                         gpios = <&gpio 37 0>;
 121                                 };
 122                                 ethernet@1 {
 123                                         compatible = "lantiq,xrx200-pdi-port";
 124                                         reg = <1>;
 125                                         phy-mode = "rgmii";
 126                                         phy-handle = <&phy1>;
 127                                         gpios = <&gpio 44 0>;
 128                                 };
 129                                 ethernet@2 {
 130                                         compatible = "lantiq,xrx200-pdi-port";
 131                                         reg = <2>;
 132                                         phy-mode = "gmii";
 133                                         phy-handle = <&phy11>;
 134                                 };
 135                                 ethernet@3 {
 136                                         compatible = "lantiq,xrx200-pdi-port";
 137                                         reg = <4>;
 138                                         phy-mode = "gmii";
 139                                         phy-handle = <&phy13>;
 140                                 };
 141                         };
 142
 143                         mdio@0 {
 144                                 #address-cells = <1>;
 145                                 #size-cells = <0>;
 146                                 compatible = "lantiq,xrx200-mdio";
 147                                 phy0: ethernet-phy@0 {
 148                                         reg = <0x0>;
 149                                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 150                                 };
 151                                 phy1: ethernet-phy@1 {
 152                                         reg = <0x1>;
 153                                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 154                                 };
 155                                 phy11: ethernet-phy@11 {
 156                                         reg = <0x11>;
 157                                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 158                                 };
 159                                 phy13: ethernet-phy@13 {
 160                                         reg = <0x13>;
 161                                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 162                                 };
 163                         };
 164                 };
 165
 166                 ifxhcd@E101000 {
 167                         status = "okay";
 168                         gpios = <&gpio 5 0
 169                                 &gpio 14 0>;
 170                         lantiq,portmask = <0x3>;
 171                 };
 172         };
 173
 174         spi {
 175                 #address-cells = <1>;
 176                 #size-cells = <1>;
 177
 178                 compatible = "spi-gpio";
 179
 180                 gpio-miso = <&gpio 16 0>;
 181                 gpio-mosi = <&gpio 17 0>;
 182                 gpio-sck = <&gpio 18 0>;
 183                 num-chipselects = <1>;
 184                 cs-gpios = <&gpio 10 1>;
 185
 186                 m25p80@0 {
 187                         #address-cells = <1>;
 188                         #size-cells = <1>;
 189                         compatible = "jedec,spi-nor";
 190                         reg = <0 0>;
 191                         spi-max-frequency = <1000000>;
 192
 193                         ath9k_cal: partition@0 {
 194                                 reg = <0x0 0x20000>;
 195                                 label = "urlader";
 196                                 read-only;
 197                         };
 198
 199                         partition@20000 {
 200                                 reg = <0x20000 0x10000>;
 201                                 label = "tffs (1)";
 202                                 read-only;
 203                         };
 204
 205                         partition@30000 {
 206                                 reg = <0x30000 0x10000>;
 207                                 label = "tffs (2)";
 208                                 read-only;
 209                         };
 210                 };
 211         };
 212
 213         ath9k_eep {
 214                 compatible = "ath9k,eeprom";
 215                 ath,eep-flash = <&ath9k_cal 0x985>;
 216                 ath,eep-endian;
 217                 ath,eep-swap;
 218         };
 219
 220         gphy-xrx200 {
 221                 compatible = "lantiq,phy-xrx200";
 222                 firmware = "lantiq/vr9_phy11g_a1x.bin";
 223                 phys = [ 00 01 ];
 224         };
 225
 226         gpio-keys-polled {
 227                 compatible = "gpio-keys-polled";
 228                 #address-cells = <1>;
 229                 #size-cells = <0>;
 230                 poll-interval = <100>;
 231                 power {
 232                         label = "power";
 233                         gpios = <&gpio 1 0>;
 234                         linux,code = <0x100>;
 235                 };
 236 /*              wifi {
 237                         label = "wifi";
 238                         gpios = <&gpio 29 0>;
 239                         linux,code = <0x101>;
 240                 };*/
 241         };
 242
 243         gpio-leds {
 244                 compatible = "gpio-leds";
 245
 246                 power: power {
 247                         label = "power";
 248                         gpios = <&gpio 32 1>;
 249                 };
 250                 power2: power2 {
 251                         label = "power2";
 252                         gpios = <&gpio 33 1>;
 253                 };
 254                 info_red {
 255                         label = "info_red";
 256                         gpios = <&gpio 34 1>;
 257                 };
 258                 wifi: wifi {
 259                         label = "wifi";
 260                         gpios = <&gpio 35 1>;
 261                 };
 262                 dsl: dsl {
 263                         label = "dsl";
 264                         gpios = <&gpio 36 1>;
 265                 };
 266                 lan {
 267                         label = "lan";
 268                         gpios = <&gpio 38 1>;
 269                 };
 270                 info_green: info_green {
 271                         label = "info_green";
 272                         gpios = <&gpio 47 1>;
 273                 };
 274         };
 275 };