target/linux/lantiq/dts/DM200.dts

   1 /dts-v1/;
   2
   3 #include "vr9.dtsi"
   4
   5 #include <dt-bindings/input/input.h>
   6
   7 / {
   8         model = "DM200 - Netgear DM200";
   9
  10         chosen {
  11                 bootargs = "console=ttyLTQ0,115200";
  12         };
  13
  14         aliases {
  15                 led-boot = &power_green;
  16                 led-failsafe = &power_amber;
  17                 led-running = &power_green;
  18
  19                 led-dsl = &dsl_green;
  20         };
  21
  22         memory@0 {
  23                 reg = <0x0 0x4000000>;
  24         };
  25
  26         fpi@10000000 {
  27                 gpio: pinmux@E100B10 {
  28                         pinctrl-names = "default";
  29                         pinctrl-0 = <&state_default>;
  30
  31                         state_default: pinmux {
  32                                 mdio {
  33                                         lantiq,groups = "mdio";
  34                                         lantiq,function = "mdio";
  35                                 };
  36                         };
  37
  38                         pins_spi_default: pins_spi_default {
  39                                 spi_in {
  40                                         lantiq,groups = "spi_di";
  41                                         lantiq,function = "spi";
  42                                 };
  43                                 spi_out {
  44                                         lantiq,groups = "spi_do", "spi_clk", "spi_cs4";
  45                                         lantiq,function = "spi";
  46                                         lantiq,output = <1>;
  47                                 };
  48                         };
  49                 };
  50
  51                 pcie@d900000 {
  52                         status = "disabled";
  53                 };
  54         };
  55
  56         gphy-xrx200 {
  57                 compatible = "lantiq,phy-xrx200";
  58                 firmware = "lantiq/vr9_phy22f_a2x.bin";
  59                 phys = [ 01 ];
  60         };
  61
  62         gpio-keys-polled {
  63                 compatible = "gpio-keys-polled";
  64                 #address-cells = <1>;
  65                 #size-cells = <0>;
  66                 poll-interval = <100>;
  67                 reset {
  68                         label = "reset";
  69                         gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
  70                         linux,code = <KEY_RESTART>;
  71                 };
  72         };
  73
  74         gpio_export {
  75                 compatible = "gpio-export";
  76                 #size-cells = <0>;
  77
  78                 annexa {
  79                         gpio-export,name = "annexa";
  80                         gpio-export,output = <0>;
  81                         gpios = <&gpio 12 GPIO_ACTIVE_HIGH>;
  82                 };
  83                 annexb {
  84                         gpio-export,name = "annexb";
  85                         gpio-export,output = <0>;
  86                         gpios = <&gpio 15 GPIO_ACTIVE_HIGH>;
  87                 };
  88         };
  89
  90         gpio-leds {
  91                 compatible = "gpio-leds";
  92
  93                 power_amber: power_amber {
  94                         label = "dm200:amber:power";
  95                         gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
  96                 };
  97                 power_green: power_green {
  98                         label = "dm200:green:power";
  99                         gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
 100                 };
 101
 102                 lan_amber {
 103                         label = "dm200:amber:lan";
 104                         gpios = <&gpio 33 GPIO_ACTIVE_HIGH>;
 105                 };
 106                 lan_green {
 107                         label = "dm200:green:lan";
 108                         gpios = <&gpio 11 GPIO_ACTIVE_HIGH>;
 109                 };
 110
 111                 dsl_amber {
 112                         label = "dm200:amber:dsl";
 113                         gpios = <&gpio 8 GPIO_ACTIVE_HIGH>;
 114                 };
 115                 dsl_green: dsl_green {
 116                         label = "dm200:green:dsl";
 117                         gpios = <&gpio 36 GPIO_ACTIVE_HIGH>;
 118                 };
 119         };
 120 };
 121
 122 &spi {
 123         pinctrl-names = "default";
 124         pinctrl-0 = <&pins_spi_default>;
 125
 126         status = "ok";
 127
 128         m25p80@4 {
 129                 #address-cells = <1>;
 130                 #size-cells = <1>;
 131                 compatible = "jedec,spi-nor";
 132                 reg = <4 0>;
 133                 spi-max-frequency = <10000000>;
 134
 135                 partitions {
 136                         compatible = "fixed-partitions";
 137                         #address-cells = <1>;
 138                         #size-cells = <1>;
 139
 140                         partition@0 {
 141                                 reg = <0x0 0x20000>;
 142                                 label = "uboot";
 143                                 read-only;
 144                         };
 145
 146                         partition@20000 {
 147                                 reg = <0x20000 0x10000>;
 148                                 label = "gphyfirmware";
 149                                 read-only;
 150                         };
 151
 152                         partition@30000 {
 153                                 reg = <0x30000 0x7b0000>;
 154                                 label = "firmware";
 155                         };
 156
 157                         partition@7e0000 {
 158                                 reg = <0x7e0000 0x10000>;
 159                                 label = "sysconfig";
 160                                 read-only;
 161                         };
 162
 163                         partition@7f0000 {
 164                                 reg = <0x7f0000 0x2000>;
 165                                 label = "ubootconfig";
 166                                 read-only;
 167                         };
 168
 169                         partition@7f2000 {
 170                                 reg = <0x7f2000 0x1000>;
 171                                 label = "ART";
 172                                 read-only;
 173                         };
 174
 175                         partition@7f3000 {
 176                                 reg = <0x7f3000 0x1000>;
 177                                 label = "pot";
 178                                 read-only;
 179                         };
 180
 181                         partition@7f4000 {
 182                                 reg = <0x7f4000 0xc000>;
 183                                 label = "ret";
 184                                 read-only;
 185                         };
 186                 };
 187         };
 188 };
 189
 190 &eth0 {
 191         lan: interface@0 {
 192                 compatible = "lantiq,xrx200-pdi";
 193                 #address-cells = <1>;
 194                 #size-cells = <0>;
 195                 reg = <0>;
 196
 197                 ethernet@4 {
 198                         compatible = "lantiq,xrx200-pdi-port";
 199                         reg = <4>;
 200                         phy-mode = "mii";
 201                         phy-handle = <&phy13>;
 202                 };
 203         };
 204
 205         mdio@0 {
 206                 #address-cells = <1>;
 207                 #size-cells = <0>;
 208                 compatible = "lantiq,xrx200-mdio";
 209                 phy13: ethernet-phy@13 {
 210                         reg = <0x13>;
 211                         compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
 212                 };
 213         };
 214 };