target/linux/kirkwood/patches-4.19/101-iconnect.patch

   1 --- a/arch/arm/boot/dts/kirkwood-iconnect.dts
   2 +++ b/arch/arm/boot/dts/kirkwood-iconnect.dts
   3 @@ -8,6 +8,13 @@
   4         model = "Iomega Iconnect";
   5         compatible = "iom,iconnect-1.1", "iom,iconnect", "marvell,kirkwood-88f6281", "marvell,kirkwood";
   6
   7 +       aliases {
   8 +               led-boot = &led_power_blue;
   9 +               led-failsafe = &led_power_red;
  10 +               led-running = &led_power_blue;
  11 +               led-upgrade = &led_power_red;
  12 +       };
  13 +
  14         memory {
  15                 device_type = "memory";
  16                 reg = <0x00000000 0x10000000>;
  17 @@ -16,8 +23,6 @@
  18         chosen {
  19                 bootargs = "console=ttyS0,115200n8 earlyprintk";
  20                 stdout-path = &uart0;
  21 -               linux,initrd-start = <0x4500040>;
  22 -               linux,initrd-end   = <0x4800000>;
  23         };
  24
  25         ocp@f1000000 {
  26 @@ -89,12 +94,11 @@
  27                         gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
  28                         default-state = "on";
  29                 };
  30 -               power-blue {
  31 +               led_power_blue: power-blue {
  32                         label = "power:blue";
  33                         gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
  34 -                       default-state = "keep";
  35                 };
  36 -               power-red {
  37 +               led_power_red: power-red {
  38                         label = "power:red";
  39                         gpios = <&gpio1 11 GPIO_ACTIVE_HIGH>;
  40                 };
  41 @@ -146,28 +150,23 @@
  42         status = "okay";
  43
  44         partition@0 {
  45 -               label = "uboot";
  46 -               reg = <0x0000000 0xc0000>;
  47 +               label = "u-boot";
  48 +               reg = <0x0000000 0xe0000>;
  49         };
  50
  51 -       partition@a0000 {
  52 -               label = "env";
  53 -               reg = <0xa0000 0x20000>;
  54 +       partition@e0000 {
  55 +               label = "u-boot environment";
  56 +               reg = <0xe0000 0x100000>;
  57         };
  58
  59         partition@100000 {
  60 -               label = "zImage";
  61 -               reg = <0x100000 0x300000>;
  62 +               label = "second stage u-boot";
  63 +               reg = <0x100000 0x200000>;
  64         };
  65
  66 -       partition@540000 {
  67 -               label = "initrd";
  68 -               reg = <0x540000 0x300000>;
  69 -       };
  70 -
  71 -       partition@980000 {
  72 -               label = "boot";
  73 -               reg = <0x980000 0x1f400000>;
  74 +       partition@200000 {
  75 +               label = "ubi";
  76 +               reg = <0x200000 0x1fe00000>;
  77         };
  78  };
  79