target/linux/ipq806x/patches-4.9/0003-arm-qcom-dts-ipq8064-Add-ADM-device-node.patch

   1 From eb694e964310ba402d6ff99f08e0ef78345e7397 Mon Sep 17 00:00:00 2001
   2 From: Thomas Pedersen <twp@codeaurora.org>
   3 Date: Mon, 16 May 2016 17:58:52 -0700
   4 Subject: [PATCH 03/37] arm: qcom: dts: ipq8064: Add ADM device node
   5
   6 Original patch by Andy Gross.
   7
   8 Signed-off-by: Andy Gross <agross@codeaurora.org>
   9 Signed-off-by: Thomas Pedersen <twp@codeaurora.org>
  10 ---
  11  arch/arm/boot/dts/qcom-ipq8064.dtsi |   21 +++++++++++++++++++++
  12  1 file changed, 21 insertions(+)
  13
  14 --- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
  15 +++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
  16 @@ -1,9 +1,11 @@
  17  /dts-v1/;
  18
  19  #include "skeleton.dtsi"
  20 +#include <dt-bindings/reset/qcom,gcc-ipq806x.h>
  21  #include <dt-bindings/clock/qcom,gcc-ipq806x.h>
  22  #include <dt-bindings/clock/qcom,lcc-ipq806x.h>
  23  #include <dt-bindings/soc/qcom,gsbi.h>
  24 +#include <dt-bindings/interrupt-controller/arm-gic.h>
  25
  26  / {
  27         model = "Qualcomm IPQ8064";
  28 @@ -342,5 +344,24 @@
  29                         #reset-cells = <1>;
  30                 };
  31
  32 +               adm_dma: dma@18300000 {
  33 +                       compatible = "qcom,adm";
  34 +                       reg = <0x18300000 0x100000>;
  35 +                       interrupts = <GIC_SPI 170 IRQ_TYPE_NONE>;
  36 +                       #dma-cells = <1>;
  37 +
  38 +                       clocks = <&gcc ADM0_CLK>, <&gcc ADM0_PBUS_CLK>;
  39 +                       clock-names = "core", "iface";
  40 +
  41 +                       resets = <&gcc ADM0_RESET>,
  42 +                                <&gcc ADM0_PBUS_RESET>,
  43 +                                <&gcc ADM0_C0_RESET>,
  44 +                                <&gcc ADM0_C1_RESET>,
  45 +                                <&gcc ADM0_C2_RESET>;
  46 +                       reset-names = "clk", "pbus", "c0", "c1", "c2";
  47 +                       qcom,ee = <0>;
  48 +
  49 +                       status = "disabled";
  50 +               };
  51         };
  52  };