target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8062-wg2600hp3.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2
   3 #include "qcom-ipq8062-smb208.dtsi"
   4 #include <dt-bindings/input/input.h>
   5
   6 / {
   7         model = "NEC Platforms Aterm WG2600HP3";
   8         compatible = "nec,wg2600hp3", "qcom,ipq8062", "qcom,ipq8064";
   9
  10         memory {
  11                 device_type = "memory";
  12                 reg =  <0x42000000 0x1e000000>;
  13         };
  14
  15         aliases {
  16                 label-mac-device = &gmac2;
  17
  18                 led-boot = &led_power_green;
  19                 led-failsafe = &led_power_red;
  20                 led-running = &led_power_green;
  21                 led-upgrade = &led_power_red;
  22         };
  23
  24         keys {
  25                 compatible = "gpio-keys";
  26
  27                 pinctrl-0 = <&buttons_pins>;
  28                 pinctrl-names = "default";
  29
  30                 reset {
  31                         label = "reset";
  32                         gpios = <&qcom_pinmux 24 GPIO_ACTIVE_LOW>;
  33                         linux,code = <KEY_RESTART>;
  34                         debounce-interval = <60>;
  35                         wakeup-source;
  36                 };
  37
  38                 wps {
  39                         label = "wps";
  40                         gpios = <&qcom_pinmux 22 GPIO_ACTIVE_LOW>;
  41                         linux,code = <KEY_WPS_BUTTON>;
  42                         debounce-interval = <60>;
  43                         wakeup-source;
  44                 };
  45
  46                 mode0 {
  47                         label = "mode0";
  48                         gpios = <&qcom_pinmux 40 GPIO_ACTIVE_LOW>;
  49                         linux,code = <BTN_0>;
  50                         linux,input-type = <EV_SW>;
  51                         debounce-interval = <60>;
  52                         wakeup-source;
  53                 };
  54
  55                 mode1 {
  56                         label = "mode1";
  57                         gpios = <&qcom_pinmux 41 GPIO_ACTIVE_LOW>;
  58                         linux,code = <BTN_1>;
  59                         linux,input-type = <EV_SW>;
  60                         debounce-interval = <60>;
  61                         wakeup-source;
  62                 };
  63         };
  64
  65         leds {
  66                 compatible = "gpio-leds";
  67
  68                 pinctrl-0 = <&leds_pins>;
  69                 pinctrl-names = "default";
  70
  71                 led_power_green: power_green {
  72                         label = "green:power";
  73                         gpios = <&qcom_pinmux 14 GPIO_ACTIVE_HIGH>;
  74                 };
  75
  76                 led_power_red: power_red {
  77                         label = "red:power";
  78                         gpios = <&qcom_pinmux 35 GPIO_ACTIVE_HIGH>;
  79                 };
  80
  81                 active_green {
  82                         label = "green:active";
  83                         gpios = <&qcom_pinmux 42 GPIO_ACTIVE_HIGH>;
  84                 };
  85
  86                 active_red {
  87                         label = "red:active";
  88                         gpios = <&qcom_pinmux 38 GPIO_ACTIVE_HIGH>;
  89                 };
  90
  91                 wlan2g_green {
  92                         label = "green:wlan2g";
  93                         gpios = <&qcom_pinmux 55 GPIO_ACTIVE_HIGH>;
  94                         linux,default-trigger = "phy1tpt";
  95                 };
  96
  97                 wlan2g_red {
  98                         label = "red:wlan2g";
  99                         gpios = <&qcom_pinmux 56 GPIO_ACTIVE_HIGH>;
 100                 };
 101
 102                 wlan5g_green {
 103                         label = "green:wlan5g";
 104                         gpios = <&qcom_pinmux 57 GPIO_ACTIVE_HIGH>;
 105                         linux,default-trigger = "phy0tpt";
 106                 };
 107
 108                 wlan5g_red {
 109                         label = "red:wlan5g";
 110                         gpios = <&qcom_pinmux 58 GPIO_ACTIVE_HIGH>;
 111                 };
 112
 113                 tv_green {
 114                         label = "green:tv";
 115                         gpios = <&qcom_pinmux 46 GPIO_ACTIVE_HIGH>;
 116                 };
 117
 118                 tv_red {
 119                         label = "red:tv";
 120                         gpios = <&qcom_pinmux 36 GPIO_ACTIVE_HIGH>;
 121                 };
 122
 123                 converter_green {
 124                         label = "green:converter";
 125                         gpios = <&qcom_pinmux 43 GPIO_ACTIVE_HIGH>;
 126                 };
 127
 128                 converter_red {
 129                         label = "red:converter";
 130                         gpios = <&qcom_pinmux 15 GPIO_ACTIVE_HIGH>;
 131                 };
 132         };
 133 };
 134
 135 /* nand_pins are used for leds_pins, empty the node
 136  * from ipq8064.dtsi
 137  */
 138 &nand_pins {
 139         /delete-property/ disable;
 140         /delete-property/ pullups;
 141         /delete-property/ hold;
 142 };
 143
 144 &qcom_pinmux {
 145         pinctrl-0 = <&akro_pins>;
 146         pinctrl-names = "default";
 147
 148         spi_pins: spi_pins {
 149                 mux {
 150                         pins = "gpio18", "gpio19", "gpio21";
 151                         function = "gsbi5";
 152                         bias-pull-down;
 153                 };
 154
 155                 data {
 156                         pins = "gpio18", "gpio19";
 157                         drive-strength = <10>;
 158                 };
 159
 160                 cs {
 161                         pins = "gpio20";
 162                         drive-strength = <10>;
 163                 };
 164
 165                 clk {
 166                         pins = "gpio21";
 167                         drive-strength = <12>;
 168                 };
 169         };
 170
 171         buttons_pins: buttons_pins {
 172                 mux {
 173                         pins = "gpio22", "gpio24", "gpio40",
 174                                 "gpio41";
 175                         function = "gpio";
 176                         drive-strength = <2>;
 177                         bias-pull-up;
 178                 };
 179         };
 180
 181         leds_pins: leds_pins {
 182                 mux {
 183                         pins = "gpio14", "gpio15", "gpio35",
 184                                 "gpio36", "gpio38", "gpio42",
 185                                 "gpio43", "gpio46", "gpio55",
 186                                 "gpio56", "gpio57", "gpio58";
 187                         function = "gpio";
 188                         bias-pull-down;
 189                 };
 190
 191                 akro2 {
 192                         pins = "gpio15", "gpio35", "gpio38",
 193                                 "gpio42", "gpio43", "gpio46",
 194                                 "gpio55", "gpio56", "gpio57",
 195                                 "gpio58";
 196                         drive-strength = <2>;
 197                 };
 198
 199                 akro4 {
 200                         pins = "gpio14", "gpio36";
 201                         drive-strength = <4>;
 202                 };
 203         };
 204
 205         /*
 206          * Stock firmware has the following settings, so let's do the same.
 207          * I don't sure why these are required.
 208          */
 209         akro_pins: akro_pinmux {
 210                 akro {
 211                         pins = "gpio17", "gpio26", "gpio47";
 212                         function = "gpio";
 213                         drive-strength = <2>;
 214                         bias-pull-down;
 215                 };
 216
 217                 reset {
 218                         pins = "gpio45";
 219                         function = "gpio";
 220                         drive-strength = <2>;
 221                         bias-disable;
 222                         output-low;
 223                 };
 224
 225                 gmac0_rgmii {
 226                         pins = "gpio25";
 227                         function = "gpio";
 228                         drive-strength = <8>;
 229                         bias-disable;
 230                 };
 231         };
 232 };
 233
 234 &gsbi5 {
 235         status = "okay";
 236         qcom,mode = <GSBI_PROT_SPI>;
 237
 238         spi@1a280000 {
 239                 status = "okay";
 240
 241                 pinctrl-0 = <&spi_pins>;
 242                 pinctrl-names = "default";
 243
 244                 cs-gpios = <&qcom_pinmux 20 GPIO_ACTIVE_HIGH>;
 245
 246                 flash@0 {
 247                         compatible = "jedec,spi-nor";
 248                         reg = <0>;
 249                         spi-max-frequency = <50000000>;
 250                         m25p,fast-read;
 251
 252                         partitions {
 253                                 compatible = "fixed-partitions";
 254                                 #address-cells = <1>;
 255                                 #size-cells = <1>;
 256
 257                                 partition@0 {
 258                                         label = "SBL1";
 259                                         reg = <0x0000000 0x0020000>;
 260                                         read-only;
 261                                 };
 262
 263                                 partition@20000 {
 264                                         label = "MIBIB";
 265                                         reg = <0x0020000 0x0020000>;
 266                                         read-only;
 267                                 };
 268
 269                                 partition@40000 {
 270                                         label = "SBL2";
 271                                         reg = <0x0040000 0x0040000>;
 272                                         read-only;
 273                                 };
 274
 275                                 partition@80000 {
 276                                         label = "SBL3";
 277                                         reg = <0x0080000 0x0080000>;
 278                                         read-only;
 279                                 };
 280
 281                                 partition@100000 {
 282                                         label = "DDRCONFIG";
 283                                         reg = <0x0100000 0x0010000>;
 284                                         read-only;
 285                                 };
 286
 287                                 partition@110000 {
 288                                         label = "SSD";
 289                                         reg = <0x0110000 0x0010000>;
 290                                         read-only;
 291                                 };
 292
 293                                 partition@120000 {
 294                                         label = "TZ";
 295                                         reg = <0x0120000 0x0080000>;
 296                                         read-only;
 297                                 };
 298
 299                                 partition@1a0000 {
 300                                         label = "RPM";
 301                                         reg = <0x01a0000 0x0080000>;
 302                                         read-only;
 303                                 };
 304
 305                                 partition@220000 {
 306                                         label = "APPSBL";
 307                                         reg = <0x0220000 0x0080000>;
 308                                         read-only;
 309                                 };
 310
 311                                 partition@2a0000 {
 312                                         label = "APPSBLENV";
 313                                         reg = <0x02a0000 0x0010000>;
 314                                         read-only;
 315                                 };
 316
 317                                 factory: partition@2b0000 {
 318                                         label = "PRODUCTDATA";
 319                                         reg = <0x02b0000 0x0030000>;
 320                                         read-only;
 321                                 };
 322
 323                                 partition@2e0000 {
 324                                         label = "ART";
 325                                         reg = <0x02e0000 0x0040000>;
 326                                         read-only;
 327                                         compatible = "nvmem-cells";
 328                                         #address-cells = <1>;
 329                                         #size-cells = <1>;
 330
 331                                         precal_ART_1000: precal@1000 {
 332                                                 reg = <0x1000 0x2f20>;
 333                                         };
 334
 335                                         precal_ART_5000: precal@5000 {
 336                                                 reg = <0x5000 0x2f20>;
 337                                         };
 338                                 };
 339
 340                                 partition@320000 {
 341                                         label = "TP";
 342                                         reg = <0x0320000 0x0040000>;
 343                                         read-only;
 344                                 };
 345
 346                                 partition@360000 {
 347                                         label = "TINY";
 348                                         reg = <0x0360000 0x0500000>;
 349                                         read-only;
 350                                 };
 351
 352                                 partition@860000 {
 353                                         compatible = "denx,uimage";
 354                                         label = "firmware";
 355                                         reg = <0x0860000 0x17a0000>;
 356                                 };
 357                         };
 358                 };
 359         };
 360 };
 361
 362 &adm_dma {
 363         status = "okay";
 364 };
 365
 366 &pcie0 {
 367         status = "okay";
 368
 369         bridge@0,0 {
 370                 reg = <0x00000000 0 0 0 0>;
 371                 #address-cells = <3>;
 372                 #size-cells = <2>;
 373                 ranges;
 374
 375                 wifi@1,0 {
 376                         compatible = "qcom,ath10k";
 377                         reg = <0x00010000 0 0 0 0>;
 378
 379                         qcom,ath10k-calibration-variant = "NEC-Platforms-WG2600HP3";
 380
 381                         nvmem-cells = <&macaddr_PRODUCTDATA_12>, <&precal_ART_1000>;
 382                         nvmem-cell-names = "mac-address", "pre-calibration";
 383                 };
 384         };
 385 };
 386
 387 &pcie1 {
 388         status = "okay";
 389         force_gen1 = <1>;
 390
 391         bridge@0,0 {
 392                 reg = <0x00000000 0 0 0 0>;
 393                 #address-cells = <3>;
 394                 #size-cells = <2>;
 395                 ranges;
 396
 397                 wifi@1,0 {
 398                         compatible = "qcom,ath10k";
 399                         reg = <0x00010000 0 0 0 0>;
 400
 401                         ieee80211-freq-limit = <2400000 2483000>;
 402                         qcom,ath10k-calibration-variant = "NEC-Platforms-WG2600HP3";
 403
 404                         nvmem-cells = <&macaddr_PRODUCTDATA_c>, <&precal_ART_5000>;
 405                         nvmem-cell-names = "mac-address", "pre-calibration";
 406                 };
 407         };
 408 };
 409
 410 &mdio0 {
 411         status = "okay";
 412
 413         pinctrl-0 = <&mdio0_pins>;
 414         pinctrl-names = "default";
 415
 416         phy0: ethernet-phy@0 {
 417                 reg = <0>;
 418                 qca,ar8327-initvals = <
 419                         0x04 0x80080080  /* PAD0_MODE */
 420                         0x0c 0x06000000  /* PAD6_MODE */
 421                         0x10 0x002613a0  /* PWS_REG */
 422                         0x50 0xcc36cc36  /* LED_CTRL0 */
 423                         0x54 0xca36ca36  /* LED_CTRL1 */
 424                         0x58 0xc936c936  /* LED_CTRL2 */
 425                         0x5c 0x03ffff00  /* LED_CTRL3 */
 426                         0x7c 0x0000004e  /* PORT0_STATUS */
 427                         0x94 0x0000004e  /* PORT6_STATUS */
 428                         0xe0 0xc74164de  /* SGMII_CTRL */
 429                         0xe4 0x0006a545  /* MAC_PWR_SEL */
 430                         >;
 431         };
 432 };
 433
 434 &gmac1 {
 435         status = "okay";
 436
 437         pinctrl-0 = <&rgmii2_pins>;
 438         pinctrl-names = "default";
 439
 440         phy-mode = "rgmii";
 441         qcom,id = <1>;
 442         mdiobus = <&mdio0>;
 443         nvmem-cells = <&macaddr_factory_0>;
 444         nvmem-cell-names = "mac-address";
 445
 446         fixed-link {
 447                 speed = <1000>;
 448                 full-duplex;
 449         };
 450 };
 451
 452 &gmac2 {
 453         status = "okay";
 454         phy-mode = "sgmii";
 455         qcom,id = <2>;
 456         mdiobus = <&mdio0>;
 457         nvmem-cells = <&macaddr_factory_6>;
 458         nvmem-cell-names = "mac-address";
 459
 460         fixed-link {
 461                 speed = <1000>;
 462                 full-duplex;
 463         };
 464 };
 465
 466 &factory {
 467         compatible = "nvmem-cells";
 468         #address-cells = <1>;
 469         #size-cells = <1>;
 470
 471         macaddr_factory_0: macaddr@0 {
 472                 reg = <0x0 0x6>;
 473         };
 474
 475         macaddr_factory_6: macaddr@6 {
 476                 reg = <0x6 0x6>;
 477         };
 478
 479         macaddr_PRODUCTDATA_c: macaddr@c {
 480                 reg = <0xc 0x6>;
 481         };
 482
 483         macaddr_PRODUCTDATA_12: macaddr@12 {
 484                 reg = <0x12 0x6>;
 485         };
 486 };
 487
 488 &hs_phy_0 {
 489         status = "okay";
 490 };
 491
 492 &ss_phy_0 {
 493         status = "okay";
 494 };
 495
 496 &usb3_0 {
 497         status = "okay";
 498 };
 499
 500 &hs_phy_1 {
 501         status = "okay";
 502 };
 503
 504 &ss_phy_1 {
 505         status = "okay";
 506 };
 507
 508 &usb3_1 {
 509         status = "okay";
 510 };