target/linux/ipq806x/files-5.10/arch/arm/boot/dts/qcom-ipq8064-g10.dts

   1 // SPDX-License-Identifier: GPL-2.0
   2 #include "qcom-ipq8064-v2.0.dtsi"
   3
   4 #include <dt-bindings/input/input.h>
   5 #include <dt-bindings/soc/qcom,tcsr.h>
   6
   7 / {
   8         compatible = "asrock,g10", "qcom,ipq8064";
   9         model = "ASRock G10";
  10
  11         aliases {
  12                 ethernet0 = &gmac1;
  13                 ethernet1 = &gmac0;
  14
  15                 led-boot = &led_status_blue;
  16                 led-failsafe = &led_status_amber;
  17                 led-running = &led_status_blue;
  18                 led-upgrade = &led_status_amber;
  19         };
  20
  21         chosen {
  22                 bootargs-override = "console=ttyMSM0,115200n8";
  23         };
  24
  25         leds {
  26                 compatible = "gpio-leds";
  27
  28                 pinctrl-0 = <&led_pins>;
  29                 pinctrl-names = "default";
  30
  31                 /*
  32                  * this is a bit misleading. Because there are about seven
  33                  * multicolor LEDs connected all wired together in parallel.
  34                  */
  35
  36                 status_yellow {
  37                         label = "yellow:status";
  38                         gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>;
  39                 };
  40
  41                 led_status_amber: status_amber {
  42                         label = "amber:status";
  43                         gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>;
  44                 };
  45
  46                 led_status_blue: status_blue {
  47                         label = "blue:status";
  48                         gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>;
  49                 };
  50
  51                 /*
  52                  * LED is declared in vendors boardfile but it's not
  53                  * working and the manual doesn't mention anything
  54                  * about the LED being white.
  55
  56                 status_white {
  57                         label = "white:status";
  58                         gpios = <&qcom_pinmux 26 GPIO_ACTIVE_HIGH>;
  59                 };
  60                 */
  61         };
  62
  63         i2c-gpio {
  64                 #address-cells = <1>;
  65                 #size-cells = <0>;
  66
  67                 compatible = "i2c-gpio";
  68                 gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>, /* sda */
  69                         <&qcom_pinmux 54 GPIO_ACTIVE_HIGH>; /* scl */
  70                 i2c-gpio,delay-us = <5>;
  71                 i2c-gpio,scl-output-only;
  72
  73                 mcu@50 {
  74                         reg = <0x50>;
  75                         compatible = "sonix,sn8f25e21";
  76                 };
  77         };
  78
  79         keys {
  80                 compatible = "gpio-keys";
  81
  82                 pinctrl-0 = <&button_pins>;
  83                 pinctrl-names = "default";
  84
  85                 ir-remote {
  86                         label = "ir-remote";
  87                         gpios = <&qcom_pinmux 15 GPIO_ACTIVE_LOW>;
  88                         linux,code = <BTN_0>;
  89                         debounce-interval = <60>;
  90                         wakeup-source;
  91                 };
  92
  93                 reset {
  94                         label = "reset";
  95                         gpios = <&qcom_pinmux 16 GPIO_ACTIVE_LOW>;
  96                         linux,code = <KEY_RESTART>;
  97                         debounce-interval = <60>;
  98                         wakeup-source;
  99                 };
 100
 101                 wps5g {
 102                         label = "wps5g";
 103                         gpios = <&qcom_pinmux 64 GPIO_ACTIVE_LOW>;
 104                         linux,code = <KEY_WPS_BUTTON>;
 105                         debounce-interval = <60>;
 106                         wakeup-source;
 107                 };
 108
 109                 wps2g {
 110                         label = "wps2g";
 111                         gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>;
 112                         linux,code = <KEY_WPS_BUTTON>;
 113                         debounce-interval = <60>;
 114                         wakeup-source;
 115                 };
 116         };
 117 };
 118
 119 &adm_dma {
 120         status = "okay";
 121 };
 122
 123 &gmac1 {
 124         status = "okay";
 125
 126         pinctrl-0 = <&rgmii2_pins>;
 127         pinctrl-names = "default";
 128
 129         phy-mode = "rgmii";
 130         qcom,id = <1>;
 131
 132         fixed-link {
 133                 speed = <1000>;
 134                 full-duplex;
 135         };
 136 };
 137
 138 &gmac2 {
 139         status = "okay";
 140
 141         phy-mode = "sgmii";
 142         qcom,id = <2>;
 143
 144         fixed-link {
 145                 speed = <1000>;
 146                 full-duplex;
 147         };
 148 };
 149
 150 &gsbi4_serial {
 151         pinctrl-0 = <&uart0_pins>;
 152         pinctrl-names = "default";
 153 };
 154
 155 &mdio0 {
 156         status = "okay";
 157
 158         pinctrl-0 = <&mdio0_pins>;
 159         pinctrl-names = "default";
 160
 161         ethernet-phy@0 {
 162                 reg = <0>;
 163                 qca,ar8327-initvals = <
 164                         0x00004 0x7600000   /* PAD0_MODE */
 165                         0x00008 0x1000000   /* PAD5_MODE */
 166                         0x0000c 0x80        /* PAD6_MODE */
 167                         0x000e4 0x6a545     /* MAC_POWER_SEL */
 168                         0x000e0 0xc74164de  /* SGMII_CTRL */
 169                         0x0007c 0x4e        /* PORT0_STATUS */
 170                         0x00094 0x4e        /* PORT6_STATUS */
 171                         >;
 172         };
 173 };
 174
 175 &nand {
 176         status = "okay";
 177
 178         pinctrl-0 = <&nand_pins>;
 179         pinctrl-names = "default";
 180
 181         nand@0 {
 182                 reg = <0>;
 183                 compatible = "qcom,nandcs";
 184
 185                 nand-ecc-strength = <4>;
 186                 nand-bus-width = <8>;
 187                 nand-ecc-step-size = <512>;
 188
 189                 nand-is-boot-medium;
 190                 qcom,boot_pages_size = <0x1200000>;
 191
 192                 partitions {
 193                         compatible = "qcom,smem-part";
 194                 };
 195         };
 196 };
 197
 198 &pcie0 {
 199         status = "okay";
 200
 201         bridge@0,0 {
 202                 reg = <0x00000000 0 0 0 0>;
 203                 #address-cells = <3>;
 204                 #size-cells = <2>;
 205                 ranges;
 206
 207                 wifi5g: wifi@1,0 {
 208                         reg = <0x00010000 0 0 0 0>;
 209                         compatible = "qcom,ath10k";
 210                         qcom,ath10k-calibration-variant = "ASRock-G10";
 211                 };
 212         };
 213 };
 214
 215 &pcie1 {
 216         status = "okay";
 217
 218         bridge@0,0 {
 219                 reg = <0x00000000 0 0 0 0>;
 220                 #address-cells = <3>;
 221                 #size-cells = <2>;
 222                 ranges;
 223
 224                 wifi2g: wifi@1,0 {
 225                         reg = <0x00010000 0 0 0 0>;
 226                         compatible = "qcom,ath10k";
 227                         qcom,ath10k-calibration-variant = "ASRock-G10";
 228                 };
 229         };
 230 };
 231
 232 &qcom_pinmux {
 233         led_pins: led_pins {
 234                 mux {
 235                         pins = "gpio7", "gpio8", "gpio9", "gpio26";
 236                         function = "gpio";
 237                         drive-strength = <2>;
 238                         bias-pull-up;
 239                 };
 240         };
 241
 242         button_pins: button_pins {
 243                 mux {
 244                         pins = "gpio15", "gpio16", "gpio64", "gpio65";
 245                         function = "gpio";
 246                         drive-strength = <2>;
 247                         bias-pull-up;
 248                 };
 249         };
 250
 251         uart0_pins: uart0_pins {
 252                 mux {
 253                         pins = "gpio10", "gpio11";
 254                         function = "gsbi4";
 255                         drive-strength = <10>;
 256                         bias-disable;
 257                 };
 258         };
 259 };
 260
 261 &rpm {
 262         pinctrl-0 = <&i2c4_pins>;
 263         pinctrl-names = "default";
 264 };
 265
 266 &usb3_0 {
 267         status = "okay";
 268 };
 269
 270 &usb3_1 {
 271         status = "okay";
 272 };
 273
 274 &tcsr {
 275         qcom,usb-ctrl-select = <TCSR_USB_SELECT_USB3_DUAL>;
 276 };
 277
 278 /delete-node/ &pcie2_pins;
 279 /delete-node/ &pcie2;