target/linux/ipq40xx/image/generic.mk

   1
   2 DEVICE_VARS += NETGEAR_BOARD_ID NETGEAR_HW_ID
   3 DEVICE_VARS += RAS_BOARD RAS_ROOTFS_SIZE RAS_VERSION
   4 DEVICE_VARS += WRGG_DEVNAME WRGG_SIGNATURE
   5
   6 define Device/FitImage
   7         KERNEL_SUFFIX := -uImage.itb
   8         KERNEL = kernel-bin | gzip | fit gzip $$(KDIR)/image-$$(DEVICE_DTS).dtb
   9         KERNEL_NAME := Image
  10 endef
  11
  12 define Device/FitImageLzma
  13         KERNEL_SUFFIX := -uImage.itb
  14         KERNEL = kernel-bin | lzma | fit lzma $$(KDIR)/image-$$(DEVICE_DTS).dtb
  15         KERNEL_NAME := Image
  16 endef
  17
  18 define Device/FitzImage
  19         KERNEL_SUFFIX := -zImage.itb
  20         KERNEL = kernel-bin | fit none $$(KDIR)/image-$$(DEVICE_DTS).dtb
  21         KERNEL_NAME := zImage
  22 endef
  23
  24 define Device/UbiFit
  25         KERNEL_IN_UBI := 1
  26         IMAGES := factory.ubi sysupgrade.bin
  27         IMAGE/factory.ubi := append-ubi
  28         IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
  29 endef
  30
  31 define Device/DniImage
  32         $(call Device/FitzImage)
  33         NETGEAR_BOARD_ID :=
  34         NETGEAR_HW_ID :=
  35         IMAGES += factory.img
  36         IMAGE/factory.img := append-kernel | pad-offset 64k 64 | append-uImage-fakehdr filesystem | append-rootfs | pad-rootfs | netgear-dni
  37         IMAGE/sysupgrade.bin := append-kernel | pad-offset 64k 64 | append-uImage-fakehdr filesystem | \
  38                 append-rootfs | pad-rootfs | check-size | append-metadata
  39 endef
  40
  41 define Build/append-rootfshdr
  42         mkimage -A $(LINUX_KARCH) \
  43                 -O linux -T filesystem \
  44                 -C lzma -a $(KERNEL_LOADADDR) -e $(if $(KERNEL_ENTRY),$(KERNEL_ENTRY),$(KERNEL_LOADADDR)) \
  45                 -n root.squashfs -d $(IMAGE_ROOTFS) $@.new
  46         cat $(IMAGE_KERNEL) > $@.$1
  47         dd if=$@.new bs=64 count=1 >> $@.$1
  48 endef
  49
  50 define Build/append-rutx-metadata
  51         echo \
  52                 '{ \
  53                         "device_code": [".*"], \
  54                         "hwver": [".*"], \
  55                         "batch": [".*"], \
  56                         "serial": [".*"], \
  57                         "supported_devices":["teltonika,rutx"] \
  58                 }' | fwtool -I - $@
  59 endef
  60
  61 define Build/copy-file
  62         cat "$(1)" > "$@"
  63 endef
  64
  65 define Build/mkmylofw_32m
  66         $(eval device_id=$(word 1,$(1)))
  67         $(eval revision=$(word 2,$(1)))
  68
  69         let \
  70                 size="$$(stat -c%s $@)" \
  71                 pad="$(subst k,* 1024,$(BLOCKSIZE))" \
  72                 pad="(pad - (size % pad)) % pad" \
  73                 newsize='size + pad'; \
  74                 $(STAGING_DIR_HOST)/bin/mkmylofw \
  75                 -B WPE72 -i 0x11f6:$(device_id):0x11f6:$(device_id) -r $(revision) \
  76                 -s 0x2000000 -p0x180000:$$newsize:al:0x80208000:"OpenWrt":$@ \
  77                 $@.new
  78         @mv $@.new $@
  79 endef
  80
  81 define Build/wac5xx-netgear-tar
  82         mkdir $@.tmp
  83         mv $@ $@.tmp/wac5xx-ubifs-root.img
  84         md5sum $@.tmp/wac5xx-ubifs-root.img > $@.tmp/wac5xx-ubifs-root.md5sum
  85         echo "WAC505 WAC510" > $@.tmp/metadata.txt
  86         echo "WAC505_V9.9.9.9" > $@.tmp/version
  87         tar -C $@.tmp/ -cf $@ .
  88         rm -rf $@.tmp
  89 endef
  90
  91 define Build/qsdk-ipq-factory-nand-askey
  92         $(TOPDIR)/scripts/mkits-qsdk-ipq-image.sh $@.its\
  93                 askey_kernel $@.$1 \
  94                 askey_fs $(IMAGE_ROOTFS) \
  95                 ubifs $@
  96         PATH=$(LINUX_DIR)/scripts/dtc:$(PATH) mkimage -f $@.its $@.new
  97         @mv $@.new $@
  98 endef
  99
 100 define Build/qsdk-ipq-app-gpt
 101         cp $@ $@.tmp 2>/dev/null || true
 102         ptgen -g -o $@.tmp -a 1 -l 1024 \
 103                         -t 0x2e -N 0:HLOS -r -p 32M \
 104                         -t 0x83 -N rootfs -r -p 128M \
 105                                 -N rootfs_data -p 512M
 106         cat $@.tmp >> $@
 107         rm $@.tmp
 108 endef
 109
 110 define Build/SenaoFW
 111         -$(STAGING_DIR_HOST)/bin/mksenaofw \
 112                 -n $(BOARD_NAME) -r $(VENDOR_ID) -p $(1) \
 113                 -c $(DATECODE) -w $(2) -x $(CW_VER) -t 0 \
 114                 -e $@ \
 115                 -o $@.new
 116         @cp $@.new $@
 117 endef
 118
 119 define Build/wrgg-image
 120         mkwrggimg -i $@ \
 121         -o $@.new \
 122         -d "$(WRGG_DEVNAME)" \
 123         -s "$(WRGG_SIGNATURE)" \
 124         -v "" -m "" -B ""
 125         mv $@.new $@
 126 endef
 127
 128 define Device/8dev_habanero-dvk
 129         $(call Device/FitImageLzma)
 130         DEVICE_VENDOR := 8devices
 131         DEVICE_MODEL := Habanero DVK
 132         IMAGE_SIZE := 30976k
 133         SOC := qcom-ipq4019
 134         IMAGE/sysupgrade.bin := append-kernel | pad-to 64k | append-rootfs | pad-rootfs | check-size | append-metadata
 135 endef
 136 TARGET_DEVICES += 8dev_habanero-dvk
 137
 138 define Device/8dev_jalapeno-common
 139         $(call Device/FitImage)
 140         $(call Device/UbiFit)
 141         BLOCKSIZE := 128k
 142         PAGESIZE := 2048
 143         SOC := qcom-ipq4018
 144 endef
 145
 146 define Device/8dev_jalapeno
 147         $(call Device/8dev_jalapeno-common)
 148         DEVICE_VENDOR := 8devices
 149         DEVICE_MODEL := Jalapeno
 150 endef
 151 TARGET_DEVICES += 8dev_jalapeno
 152
 153 define Device/alfa-network_ap120c-ac
 154         $(call Device/FitImage)
 155         $(call Device/UbiFit)
 156         DEVICE_VENDOR := ALFA Network
 157         DEVICE_MODEL := AP120C-AC
 158         SOC := qcom-ipq4018
 159         DEVICE_PACKAGES := kmod-usb-acm kmod-tpm-i2c-atmel
 160         BLOCKSIZE := 128k
 161         PAGESIZE := 2048
 162         IMAGE_SIZE := 65536k
 163         IMAGES := factory.bin sysupgrade.bin
 164         IMAGE/factory.bin := append-ubi | qsdk-ipq-factory-nand
 165 endef
 166 TARGET_DEVICES += alfa-network_ap120c-ac
 167
 168 define Device/aruba_glenmorangie
 169         $(call Device/FitImageLzma)
 170         DEVICE_VENDOR := Aruba
 171         SOC := qcom-ipq4029
 172 endef
 173
 174 define Device/aruba_ap-303
 175         $(call Device/aruba_glenmorangie)
 176         DEVICE_MODEL := AP-303
 177 endef
 178 TARGET_DEVICES += aruba_ap-303
 179
 180 define Device/aruba_ap-303h
 181         $(call Device/aruba_glenmorangie)
 182         DEVICE_MODEL := AP-303H
 183 endef
 184 TARGET_DEVICES += aruba_ap-303h
 185
 186 define Device/aruba_ap-365
 187         $(call Device/aruba_glenmorangie)
 188         DEVICE_MODEL := AP-365
 189         DEVICE_PACKAGES := kmod-hwmon-ad7418
 190 endef
 191 TARGET_DEVICES += aruba_ap-365
 192
 193 define Device/asus_map-ac2200
 194         $(call Device/FitImageLzma)
 195         DEVICE_VENDOR := ASUS
 196         DEVICE_MODEL := Lyra (MAP-AC2200)
 197         SOC := qcom-ipq4019
 198         DEVICE_PACKAGES := ath10k-firmware-qca9888-ct kmod-ath3k
 199 endef
 200 TARGET_DEVICES += asus_map-ac2200
 201
 202 # WARNING: this is an initramfs image that gets you half of the way there
 203 #          you need to delete the jffs2 ubi volume and sysupgrade to the final image
 204 # to get a "trx" you can flash via web UI for ac42u/ac58u:
 205 # - change call Device/FitImageLzma to Device/FitImage
 206 # - add the following below UIMAGE_NAME
 207 #   UIMAGE_MAGIC := 0x27051956
 208 #   IMAGES += factory.trx
 209 #   IMAGE/factory.trx := copy-file $(KDIR)/tmp/$$(KERNEL_INITRAMFS_IMAGE) | uImage none
 210 define Device/asus_rt-ac42u
 211         $(call Device/FitImageLzma)
 212         DEVICE_VENDOR := ASUS
 213         DEVICE_MODEL := RT-AC42U
 214         DEVICE_ALT0_VENDOR := ASUS
 215         DEVICE_ALT0_MODEL := RT-ACRH17
 216         DEVICE_ALT1_VENDOR := ASUS
 217         DEVICE_ALT1_MODEL := RT-AC2200
 218         SOC := qcom-ipq4019
 219         BLOCKSIZE := 128k
 220         PAGESIZE := 2048
 221         IMAGE_SIZE := 20439364
 222         FILESYSTEMS := squashfs
 223 #       RT-AC82U is nowhere to be found online
 224 #       Rather, this device is a/k/a RT-AC42U
 225 #       But we'll go with what the vendor firmware has...
 226         UIMAGE_NAME:=$(shell echo -e '\03\01\01\01RT-AC82U')
 227         DEVICE_PACKAGES := ath10k-firmware-qca9984-ct kmod-usb-ledtrig-usbport
 228 endef
 229 TARGET_DEVICES += asus_rt-ac42u
 230
 231 define Device/asus_rt-ac58u
 232         $(call Device/FitImageLzma)
 233         DEVICE_VENDOR := ASUS
 234         DEVICE_MODEL := RT-AC58U
 235         DEVICE_ALT0_VENDOR := ASUS
 236         DEVICE_ALT0_MODEL := RT-ACRH13
 237         SOC := qcom-ipq4018
 238         BLOCKSIZE := 128k
 239         PAGESIZE := 2048
 240         IMAGE_SIZE := 20439364
 241         FILESYSTEMS := squashfs
 242 #       Someone - in their infinite wisdom - decided to put the firmware
 243 #       version in front of the image name \03\00\00\04 => Version 3.0.0.4
 244 #       Since u-boot works with strings we either need another fixup step
 245 #       to add a version... or we are very careful not to add '\0' into that
 246 #       string and call it a day.... Yeah, we do the latter!
 247         UIMAGE_NAME:=$(shell echo -e '\03\01\01\01RT-AC58U')
 248         DEVICE_PACKAGES := -kmod-ath10k-ct kmod-ath10k-ct-smallbuffers \
 249                 kmod-usb-ledtrig-usbport
 250 endef
 251 TARGET_DEVICES += asus_rt-ac58u
 252
 253 define Device/avm_fritzbox-4040
 254         $(call Device/FitImageLzma)
 255         DEVICE_VENDOR := AVM
 256         DEVICE_MODEL := FRITZ!Box 4040
 257         SOC := qcom-ipq4018
 258         BOARD_NAME := fritz4040
 259         IMAGE_SIZE := 29056k
 260         UBOOT_PATH := $(STAGING_DIR_IMAGE)/uboot-fritz4040.bin
 261         UBOOT_PARTITION_SIZE := 524288
 262         IMAGES += eva.bin
 263         IMAGE/eva.bin := append-uboot | pad-to $$$$(UBOOT_PARTITION_SIZE) | append-kernel | append-rootfs | pad-rootfs
 264         IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | check-size | append-metadata
 265         DEVICE_PACKAGES := fritz-tffs fritz-caldata
 266 endef
 267 TARGET_DEVICES += avm_fritzbox-4040
 268
 269 define Device/avm_fritzbox-7530
 270         $(call Device/FitImageLzma)
 271         DEVICE_VENDOR := AVM
 272         DEVICE_MODEL := FRITZ!Box 7530
 273         DEVICE_ALT0_VENDOR := AVM
 274         DEVICE_ALT0_MODEL := FRITZ!Box 7520
 275         SOC := qcom-ipq4019
 276         DEVICE_PACKAGES := fritz-caldata fritz-tffs-nand ltq-vdsl-vr11-app
 277 endef
 278 TARGET_DEVICES += avm_fritzbox-7530
 279
 280 define Device/avm_fritzrepeater-1200
 281         $(call Device/FitImageLzma)
 282         DEVICE_VENDOR := AVM
 283         DEVICE_MODEL := FRITZ!Repeater 1200
 284         SOC := qcom-ipq4019
 285         DEVICE_PACKAGES := fritz-caldata fritz-tffs-nand
 286 endef
 287 TARGET_DEVICES += avm_fritzrepeater-1200
 288
 289 define Device/avm_fritzrepeater-3000
 290         $(call Device/FitImageLzma)
 291         DEVICE_VENDOR := AVM
 292         DEVICE_MODEL := FRITZ!Repeater 3000
 293         SOC := qcom-ipq4019
 294         DEVICE_PACKAGES := ath10k-firmware-qca9984-ct fritz-caldata fritz-tffs-nand
 295 endef
 296 TARGET_DEVICES += avm_fritzrepeater-3000
 297
 298 define Device/buffalo_wtr-m2133hp
 299         $(call Device/FitImage)
 300         $(call Device/UbiFit)
 301         DEVICE_VENDOR := Buffalo
 302         DEVICE_MODEL := WTR-M2133HP
 303         SOC := qcom-ipq4019
 304         DEVICE_PACKAGES := ath10k-firmware-qca9984-ct
 305         BLOCKSIZE := 128k
 306         PAGESIZE := 2048
 307 endef
 308 TARGET_DEVICES += buffalo_wtr-m2133hp
 309
 310 define Device/cellc_rtl30vw
 311         KERNEL_SUFFIX := -zImage.itb
 312         KERNEL_INITRAMFS = kernel-bin | gzip | fit gzip $$(KDIR)/image-$$(DEVICE_DTS).dtb
 313         KERNEL = kernel-bin | fit none $$(KDIR)/image-$$(DEVICE_DTS).dtb | uImage lzma | pad-to 2048
 314         KERNEL_NAME := zImage
 315         KERNEL_IN_UBI :=
 316         IMAGES := factory.bin sysupgrade.bin
 317         IMAGE/factory.bin := append-rootfshdr kernel | append-ubi | qsdk-ipq-factory-nand-askey kernel
 318         IMAGE/sysupgrade.bin := append-rootfshdr kernel | sysupgrade-tar kernel=$$$$@.kernel | append-metadata
 319         DEVICE_VENDOR := Cell C
 320         DEVICE_MODEL := RTL30VW
 321         SOC := qcom-ipq4019
 322         DEVICE_DTS_CONFIG := config@5
 323         KERNEL_INSTALL := 1
 324         KERNEL_SIZE := 4096k
 325         IMAGE_SIZE := 57344k
 326         BLOCKSIZE := 128k
 327         PAGESIZE := 2048
 328         DEVICE_PACKAGES := kmod-usb-net-qmi-wwan kmod-usb-serial-option uqmi
 329 endef
 330 TARGET_DEVICES += cellc_rtl30vw
 331
 332 define Device/cilab_meshpoint-one
 333         $(call Device/8dev_jalapeno-common)
 334         DEVICE_VENDOR := Crisis Innovation Lab
 335         DEVICE_MODEL := MeshPoint.One
 336         DEVICE_PACKAGES += kmod-i2c-gpio kmod-iio-bmp280-i2c kmod-hwmon-ina2xx kmod-rtc-pcf2127
 337 endef
 338 # Missing DSA Setup
 339 #TARGET_DEVICES += cilab_meshpoint-one
 340
 341 define Device/compex_wpj419
 342         $(call Device/FitImage)
 343         $(call Device/UbiFit)
 344         DEVICE_VENDOR := Compex
 345         DEVICE_MODEL := WPJ419
 346         SOC := qcom-ipq4019
 347         DEVICE_DTS_CONFIG := config@12
 348         KERNEL_INSTALL := 1
 349         BLOCKSIZE := 128k
 350         PAGESIZE := 2048
 351         FILESYSTEMS := squashfs
 352 endef
 353 # Missing DSA Setup
 354 #TARGET_DEVICES += compex_wpj419
 355
 356 define Device/compex_wpj428
 357         $(call Device/FitImage)
 358         DEVICE_VENDOR := Compex
 359         DEVICE_MODEL := WPJ428
 360         SOC := qcom-ipq4028
 361         DEVICE_DTS_CONFIG := config@4
 362         BLOCKSIZE := 64k
 363         IMAGE_SIZE := 31232k
 364         KERNEL_SIZE := 4096k
 365         IMAGES += cpximg-6a04.bin
 366         IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
 367         IMAGE/cpximg-6a04.bin := append-kernel | append-rootfs | pad-rootfs | mkmylofw_32m 0x8A2 3
 368         DEVICE_PACKAGES := kmod-gpio-beeper
 369         DEFAULT := n
 370 endef
 371 TARGET_DEVICES += compex_wpj428
 372
 373 define Device/devolo_magic-2-wifi-next
 374         $(call Device/FitImage)
 375         DEVICE_VENDOR := devolo
 376         DEVICE_MODEL := Magic 2 WiFi next
 377         SOC := qcom-ipq4018
 378         KERNEL_SIZE := 4096k
 379
 380         # If the bootloader sees 0xDEADC0DE and this trailer at the 64k boundary of a TFTP image
 381         # it will bootm it, just like we want for the initramfs.
 382         KERNEL_INITRAMFS := kernel-bin | gzip | fit gzip $$(KDIR)/image-$$(DEVICE_DTS).dtb | pad-to 64k |\
 383                 append-string -e '\xDE\xAD\xC0\xDE{"fl_initramfs":""}\x00'
 384
 385         IMAGE_SIZE := 26624k
 386         IMAGES := sysupgrade.bin
 387         IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
 388         DEFAULT := n
 389 endef
 390 # Missing DSA Setup
 391 #TARGET_DEVICES += devolo_magic-2-wifi-next
 392
 393 define Device/dlink_dap-2610
 394         $(call Device/FitImageLzma)
 395         DEVICE_VENDOR := D-Link
 396         DEVICE_MODEL := DAP-2610
 397         SOC := qcom-ipq4018
 398         DEVICE_DTS_CONFIG := config@ap.dk01.1-c1
 399         BLOCKSIZE := 64k
 400         WRGG_DEVNAME := /dev/mtdblock/8
 401         WRGG_SIGNATURE := wapac30_dkbs_dap2610
 402         IMAGE_SIZE := 14080k
 403         IMAGES += factory.bin
 404         # Bootloader expects a special 160 byte header which is added by
 405         # wrgg-image.
 406         # Factory image size must be larger than 6MB, and size in wrgg header must
 407         # match actual factory image size to be flashable from D-Link http server.
 408         # Bootloader verifies checksum of wrgg image before booting, thus jffs2
 409         # cannot be part of the wrgg image. This is solved in the factory image by
 410         # having the rootfs at the end of the image (without pad-rootfs). And in
 411         # the sysupgrade image only the kernel is included in the wrgg checksum,
 412         # but this is not flashable from the D-link http server.
 413         # append-rootfs must start on an erase block boundary.
 414         IMAGE/factory.bin    := append-kernel | pad-offset 6144k 160 | append-rootfs | wrgg-image | check-size
 415         IMAGE/sysupgrade.bin := append-kernel | wrgg-image | pad-to $$$$(BLOCKSIZE) | append-rootfs | pad-rootfs | check-size | append-metadata
 416 endef
 417 TARGET_DEVICES += dlink_dap-2610
 418
 419 define Device/edgecore_ecw5211
 420         $(call Device/FitImage)
 421         $(call Device/UbiFit)
 422         DEVICE_VENDOR := Edgecore
 423         DEVICE_MODEL := ECW5211
 424         SOC := qcom-ipq4018
 425         BLOCKSIZE := 128k
 426         PAGESIZE := 2048
 427         DEVICE_DTS_CONFIG := config@ap.dk01.1-c2
 428         DEVICE_PACKAGES := kmod-tpm-i2c-atmel kmod-usb-acm
 429 endef
 430 TARGET_DEVICES += edgecore_ecw5211
 431
 432 define Device/edgecore_oap100
 433         $(call Device/FitImage)
 434         $(call Device/UbiFit)
 435         DEVICE_VENDOR := Edgecore
 436         DEVICE_MODEL := OAP100
 437         SOC := qcom-ipq4019
 438         BLOCKSIZE := 128k
 439         PAGESIZE := 2048
 440         IMAGES := sysupgrade.bin
 441         DEVICE_DTS_CONFIG := config@ap.dk07.1-c1
 442         DEVICE_PACKAGES := kmod-usb-acm kmod-usb-net kmod-usb-net-cdc-qmi uqmi
 443 endef
 444 # Missing DSA Setup
 445 #TARGET_DEVICES += edgecore_oap100
 446
 447 define Device/engenius_eap1300
 448         $(call Device/FitImage)
 449         DEVICE_VENDOR := EnGenius
 450         DEVICE_MODEL := EAP1300
 451         DEVICE_DTS_CONFIG := config@4
 452         BOARD_NAME := eap1300
 453         SOC := qcom-ipq4018
 454         KERNEL_SIZE := 5120k
 455         IMAGE_SIZE := 25344k
 456         IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
 457 endef
 458 # Missing DSA Setup
 459 #TARGET_DEVICES += engenius_eap1300
 460
 461 define Device/engenius_eap2200
 462         $(call Device/FitImage)
 463         $(call Device/UbiFit)
 464         DEVICE_VENDOR := EnGenius
 465         DEVICE_MODEL := EAP2200
 466         SOC := qcom-ipq4019
 467         BLOCKSIZE := 128k
 468         PAGESIZE := 2048
 469         DEVICE_PACKAGES := ath10k-firmware-qca9888-ct -kmod-ath10k-ct kmod-ath10k-ct-smallbuffers
 470 endef
 471 # Missing DSA Setup
 472 #TARGET_DEVICES += engenius_eap2200
 473
 474 define Device/engenius_emd1
 475         $(call Device/FitImage)
 476         DEVICE_VENDOR := EnGenius
 477         DEVICE_MODEL := EMD1
 478         DEVICE_DTS_CONFIG := config@4
 479         SOC := qcom-ipq4018
 480         IMAGE_SIZE := 30720k
 481         IMAGES += factory.bin
 482         IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
 483         IMAGE/factory.bin := qsdk-ipq-factory-nor | check-size
 484 endef
 485 # Missing DSA Setup
 486 #TARGET_DEVICES += engenius_emd1
 487
 488 define Device/engenius_emr3500
 489         $(call Device/FitImage)
 490         DEVICE_VENDOR := EnGenius
 491         DEVICE_MODEL := EMR3500
 492         DEVICE_DTS_CONFIG := config@4
 493         SOC := qcom-ipq4018
 494         KERNEL_SIZE := 4096k
 495         IMAGE_SIZE := 30720k
 496         IMAGES += factory.bin
 497         IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
 498         IMAGE/factory.bin := qsdk-ipq-factory-nor | check-size
 499         DEFAULT := n
 500 endef
 501 # Missing DSA Setup
 502 #TARGET_DEVICES += engenius_emr3500
 503
 504 define Device/engenius_ens620ext
 505         $(call Device/FitImage)
 506         DEVICE_VENDOR := EnGenius
 507         DEVICE_MODEL := ENS620EXT
 508         SOC := qcom-ipq4018
 509         DEVICE_DTS_CONFIG := config@4
 510         BLOCKSIZE := 64k
 511         PAGESIZE := 256
 512         BOARD_NAME := ENS620EXT
 513         VENDOR_ID := 0x0101
 514         PRODUCT_ID := 0x79
 515         PRODUCT_ID_NEW := 0xA4
 516         DATECODE := 190507
 517         FW_VER := 3.1.2
 518         FW_VER_NEW := 3.5.6
 519         CW_VER := 1.8.99
 520         IMAGE_SIZE := 21312k
 521         KERNEL_SIZE := 5120k
 522         FILESYSTEMS := squashfs
 523         IMAGES += factory_30.bin factory_35.bin
 524         IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | check-size | append-metadata
 525         IMAGE/factory_30.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-rootfs | pad-rootfs | check-size | SenaoFW $$$$(PRODUCT_ID) $$$$(FW_VER)
 526         IMAGE/factory_35.bin := qsdk-ipq-factory-nor | check-size | SenaoFW $$$$(PRODUCT_ID_NEW) $$$$(FW_VER_NEW)
 527 endef
 528 # Missing DSA Setup
 529 #TARGET_DEVICES += engenius_ens620ext
 530
 531 define Device/extreme-networks_ws-ap3915i
 532         $(call Device/FitImage)
 533         DEVICE_VENDOR := Extreme Networks
 534         DEVICE_MODEL := WS-AP3915i
 535         IMAGE_SIZE := 30080k
 536         SOC := qcom-ipq4029
 537         BLOCKSIZE := 128k
 538         IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | check-size | append-metadata
 539 endef
 540 TARGET_DEVICES += extreme-networks_ws-ap3915i
 541
 542 define Device/ezviz_cs-w3-wd1200g-eup
 543         $(call Device/FitImage)
 544         DEVICE_VENDOR := EZVIZ
 545         DEVICE_MODEL := CS-W3-WD1200G
 546         DEVICE_VARIANT := EUP
 547         IMAGE_SIZE := 14848k
 548         KERNEL_SIZE = 6m
 549         SOC := qcom-ipq4018
 550         IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | \
 551                 append-metadata
 552         DEVICE_PACKAGES := -kmod-ath10k-ct kmod-ath10k-ct-smallbuffers
 553         DEVICE_COMPAT_VERSION := 2.0
 554         DEVICE_COMPAT_MESSAGE := uboot's bootcmd has to be updated (see wiki). \
 555                 Upgrade via sysupgrade mechanism is not possible.
 556 endef
 557 TARGET_DEVICES += ezviz_cs-w3-wd1200g-eup
 558
 559 define Device/glinet_gl-a1300
 560         $(call Device/FitImage)
 561         $(call Device/UbiFit)
 562         DEVICE_VENDOR := GL.iNet
 563         DEVICE_MODEL := GL-A1300
 564         SOC := qcom-ipq4018
 565         DEVICE_DTS_CONFIG := config@ap.dk01.1-c2
 566         BLOCKSIZE := 128k
 567         PAGESIZE := 2048
 568         IMAGE_SIZE := 131072k
 569 endef
 570 TARGET_DEVICES += glinet_gl-a1300
 571
 572 define Device/glinet_gl-ap1300
 573         $(call Device/FitImage)
 574         $(call Device/UbiFit)
 575         DEVICE_VENDOR := GL.iNet
 576         DEVICE_MODEL := GL-AP1300
 577         SOC := qcom-ipq4018
 578         DEVICE_DTS_CONFIG := config@ap.dk01.1-c2
 579         BLOCKSIZE := 128k
 580         PAGESIZE := 2048
 581         IMAGE_SIZE := 131072k
 582         KERNEL_INSTALL := 1
 583         DEVICE_PACKAGES := kmod-usb-net-qmi-wwan kmod-usb-serial-option uqmi
 584 endef
 585 TARGET_DEVICES += glinet_gl-ap1300
 586
 587 define Device/glinet_gl-b1300
 588         $(call Device/FitzImage)
 589         DEVICE_VENDOR := GL.iNet
 590         DEVICE_MODEL := GL-B1300
 591         BOARD_NAME := gl-b1300
 592         SOC := qcom-ipq4029
 593         KERNEL_SIZE := 4096k
 594         IMAGE_SIZE := 26624k
 595         IMAGE/sysupgrade.bin := append-kernel |append-rootfs | pad-rootfs | append-metadata
 596 endef
 597 TARGET_DEVICES += glinet_gl-b1300
 598
 599 define Device/glinet_gl-b2200
 600         $(call Device/FitzImage)
 601         DEVICE_VENDOR := GL.iNet
 602         DEVICE_MODEL := GL-B2200
 603         SOC := qcom-ipq4019
 604         DEVICE_DTS_CONFIG := config@ap.dk04.1-c3
 605         KERNEL_INITRAMFS_SUFFIX := -recovery.itb
 606         IMAGES := emmc.img.gz sysupgrade.bin
 607         IMAGE/emmc.img.gz := qsdk-ipq-app-gpt |\
 608                 pad-to 1024k | append-kernel |\
 609                 pad-to 33792k | append-rootfs |\
 610                 append-metadata | gzip
 611         IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
 612         DEVICE_PACKAGES := ath10k-firmware-qca9888-ct \
 613                 kmod-fs-ext4 kmod-mmc kmod-spi-dev mkf2fs e2fsprogs kmod-fs-f2fs
 614 endef
 615 TARGET_DEVICES += glinet_gl-b2200
 616
 617 define Device/glinet_gl-s1300
 618         $(call Device/FitzImage)
 619         DEVICE_VENDOR := GL.iNet
 620         DEVICE_MODEL := GL-S1300
 621         SOC := qcom-ipq4029
 622         KERNEL_SIZE := 4096k
 623         IMAGE_SIZE := 26624k
 624         IMAGES := sysupgrade.bin
 625         IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
 626         DEVICE_PACKAGES := kmod-fs-ext4 kmod-mmc kmod-spi-dev
 627 endef
 628 # Missing DSA Setup
 629 #TARGET_DEVICES += glinet_gl-s1300
 630
 631 define Device/kernel-size-6350-8300
 632         DEVICE_COMPAT_VERSION := 2.0
 633         DEVICE_COMPAT_MESSAGE := Kernel partition size must be increased for \
 634         this OpenWrt version. Before continuing, you MUST issue either the \
 635         command "fw_setenv kernsize 500000" from the OpenWrt command line, \
 636         or "setenv kernsize 500000 ; saveenv" from the U-Boot serial console. \
 637         Instead of the sysupgrade image, you must then install the OpenWrt \
 638         factory image, setting the force flag and wiping the configuration. \
 639         (e.g. "sysupgrade -n -F openwrt-squashfs-factory.bin" on command line)
 640 endef
 641
 642 define Device/linksys_ea6350v3
 643         # The Linksys EA6350v3 has a uboot bootloader that does not
 644         # support either booting lzma kernel images nor booting UBI
 645         # partitions. This uboot, however, supports raw kernel images and
 646         # gzipped images.
 647         #
 648         # As configured by the OEM factory, the device will boot the kernel
 649         # from a fixed address with a fixed length of 3 MiB. Also, the
 650         # device has a hard-coded kernel command line that requires the
 651         # rootfs and alt_rootfs to be in mtd11 and mtd13 respectively.
 652         # Oh... and the kernel partition overlaps with the rootfs
 653         # partition (the same for alt_kernel and alt_rootfs).
 654         #
 655         # If you are planing re-partitioning the device, you may want to
 656         # keep these details in mind:
 657         # 1. The kernel addresses you should honor are 0x00000000 and
 658         #    0x02800000 respectively.
 659         # 2. The kernel size (plus the dtb) cannot exceed 3 MiB in size
 660         #    unless the uboot environment variable "kernsize" is increased.
 661         # 3. You can use 'zImage', but not a raw 'Image' packed with lzma.
 662         # 4. The kernel command line from uboot is harcoded to boot with
 663         #    rootfs either in mtd11 or mtd13.
 664         $(call Device/FitzImage)
 665         $(call Device/kernel-size-6350-8300)
 666         DEVICE_VENDOR := Linksys
 667         DEVICE_MODEL := EA6350
 668         DEVICE_VARIANT := v3
 669         SOC := qcom-ipq4018
 670         BLOCKSIZE := 128k
 671         PAGESIZE := 2048
 672         KERNEL_SIZE := 5120k
 673         IMAGE_SIZE := 35840k
 674         UBINIZE_OPTS := -E 5
 675         IMAGES += factory.bin
 676         IMAGE/factory.bin := append-kernel | append-uImage-fakehdr filesystem | pad-to $$$$(KERNEL_SIZE) | append-ubi | linksys-image type=EA6350v3
 677 endef
 678 TARGET_DEVICES += linksys_ea6350v3
 679
 680 define Device/linksys_ea8300
 681         $(call Device/FitzImage)
 682         $(call Device/kernel-size-6350-8300)
 683         DEVICE_VENDOR := Linksys
 684         DEVICE_MODEL := EA8300
 685         SOC := qcom-ipq4019
 686         KERNEL_SIZE := 5120k
 687         IMAGE_SIZE := 84992k
 688         BLOCKSIZE := 128k
 689         PAGESIZE := 2048
 690         UBINIZE_OPTS := -E 5    # EOD marks to "hide" factory sig at EOF
 691         IMAGES += factory.bin
 692         IMAGE/factory.bin  := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi | linksys-image type=EA8300
 693         DEVICE_PACKAGES := ath10k-firmware-qca9888-ct kmod-usb-ledtrig-usbport
 694 endef
 695 TARGET_DEVICES += linksys_ea8300
 696
 697 define Device/linksys_mr8300
 698         $(call Device/FitzImage)
 699         $(call Device/kernel-size-6350-8300)
 700         DEVICE_VENDOR := Linksys
 701         DEVICE_MODEL := MR8300
 702         SOC := qcom-ipq4019
 703         KERNEL_SIZE := 5120k
 704         IMAGE_SIZE := 84992k
 705         BLOCKSIZE := 128k
 706         PAGESIZE := 2048
 707         UBINIZE_OPTS := -E 5    # EOD marks to "hide" factory sig at EOF
 708         IMAGES += factory.bin
 709         IMAGE/factory.bin  := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi | linksys-image type=MR8300
 710         DEVICE_PACKAGES := ath10k-firmware-qca9888-ct kmod-usb-ledtrig-usbport
 711 endef
 712 TARGET_DEVICES += linksys_mr8300
 713
 714 define Device/linksys_whw03v2
 715         $(call Device/FitzImage)
 716         DEVICE_VENDOR := Linksys
 717         DEVICE_MODEL := WHW03
 718         DEVICE_VARIANT := V2
 719         SOC := qcom-ipq4019
 720         KERNEL_SIZE := 6144k
 721         IMAGE_SIZE := 158720k
 722         BLOCKSIZE := 128k
 723         PAGESIZE := 2048
 724         UBINIZE_OPTS := -E 5    # EOD marks to "hide" factory sig at EOF
 725         IMAGES += factory.bin
 726         IMAGE/factory.bin  := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi | linksys-image type=WHW03v2
 727         DEVICE_PACKAGES := ath10k-firmware-qca9888-ct kmod-leds-pca963x kmod-spi-dev kmod-bluetooth
 728 endef
 729 TARGET_DEVICES += linksys_whw03v2
 730
 731 define Device/linksys_whw01
 732         $(call Device/FitzImage)
 733         DEVICE_VENDOR := Linksys
 734         DEVICE_MODEL := WHW01
 735         KERNEL_SIZE := 6144k
 736         IMAGE_SIZE := 75776K
 737         SOC := qcom-ipq4018
 738         BLOCKSIZE := 128k
 739         PAGESIZE := 2048
 740         UBINIZE_OPTS := -E 5    # EOD marks to "hide" factory sig at EOF
 741         IMAGES += factory.bin
 742         IMAGE/factory.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi | linksys-image type=WHW01
 743         DEVICE_PACKAGES := uboot-envtools kmod-leds-pca963x
 744 endef
 745 TARGET_DEVICES += linksys_whw01
 746
 747 define Device/luma_wrtq-329acn
 748         $(call Device/FitImage)
 749         DEVICE_VENDOR := Luma Home
 750         DEVICE_MODEL := WRTQ-329ACN
 751         SOC := qcom-ipq4018
 752         DEVICE_PACKAGES := kmod-ath3k kmod-eeprom-at24 kmod-i2c-gpio
 753         IMAGE_SIZE := 76632k
 754         BLOCKSIZE := 128k
 755         PAGESIZE := 2048
 756 endef
 757 TARGET_DEVICES += luma_wrtq-329acn
 758
 759 define Device/meraki_mr33
 760         $(call Device/FitImage)
 761         DEVICE_VENDOR := Cisco Meraki
 762         DEVICE_MODEL := MR33
 763         SOC := qcom-ipq4029
 764         BLOCKSIZE := 128k
 765         PAGESIZE := 2048
 766         DEVICE_PACKAGES := -swconfig ath10k-firmware-qca9887-ct
 767         DEFAULT := n
 768 endef
 769 TARGET_DEVICES += meraki_mr33
 770
 771 define Device/meraki_mr74
 772         $(call Device/FitImage)
 773         DEVICE_VENDOR := Cisco Meraki
 774         DEVICE_MODEL := MR74
 775         SOC := qcom-ipq4029
 776         BLOCKSIZE := 128k
 777         PAGESIZE := 2048
 778         DEVICE_PACKAGES := -swconfig ath10k-firmware-qca9887-ct
 779         DEVICE_DTS_CONFIG := config@3
 780         DEFAULT := n
 781 endef
 782 TARGET_DEVICES += meraki_mr74
 783
 784 define Device/mobipromo_cm520-79f
 785         $(call Device/FitzImage)
 786         $(call Device/UbiFit)
 787         DEVICE_VENDOR := MobiPromo
 788         DEVICE_MODEL := CM520-79F
 789         SOC := qcom-ipq4019
 790         BLOCKSIZE := 128k
 791         PAGESIZE := 2048
 792         DEVICE_PACKAGES := kmod-usb-ledtrig-usbport
 793 endef
 794 TARGET_DEVICES += mobipromo_cm520-79f
 795
 796 define Device/netgear_ex61x0v2
 797         $(call Device/DniImage)
 798         DEVICE_VENDOR := NETGEAR
 799         DEVICE_DTS_CONFIG := config@4
 800         NETGEAR_BOARD_ID := EX6150v2series
 801         NETGEAR_HW_ID := 29765285+16+0+128+2x2
 802         IMAGE_SIZE := 14400k
 803         SOC := qcom-ipq4018
 804 endef
 805
 806 define Device/netgear_ex6100v2
 807         $(call Device/netgear_ex61x0v2)
 808         DEVICE_MODEL := EX6100
 809         DEVICE_VARIANT := v2
 810 endef
 811 TARGET_DEVICES += netgear_ex6100v2
 812
 813 define Device/netgear_ex6150v2
 814         $(call Device/netgear_ex61x0v2)
 815         DEVICE_MODEL := EX6150
 816         DEVICE_VARIANT := v2
 817 endef
 818 TARGET_DEVICES += netgear_ex6150v2
 819
 820 define Device/netgear_orbi
 821         $(call Device/DniImage)
 822         SOC := qcom-ipq4019
 823         DEVICE_VENDOR := NETGEAR
 824         IMAGE/factory.img := append-kernel | pad-offset 128k 64 | \
 825                 append-uImage-fakehdr filesystem | pad-to $$$$(KERNEL_SIZE) | \
 826                 append-rootfs | pad-rootfs | netgear-dni
 827         IMAGE/sysupgrade.bin/squashfs := append-rootfs | pad-to 64k | \
 828                 sysupgrade-tar rootfs=$$$$@ | append-metadata
 829         DEVICE_PACKAGES := ath10k-firmware-qca9984-ct e2fsprogs kmod-fs-ext4 losetup
 830 endef
 831
 832 define Device/netgear_rbx50
 833         $(call Device/netgear_orbi)
 834         NETGEAR_HW_ID := 29765352+0+4000+512+2x2+2x2+4x4
 835         KERNEL_SIZE := 3932160
 836         ROOTFS_SIZE := 32243712
 837         IMAGE_SIZE := 36175872
 838 endef
 839
 840 define Device/netgear_rbr50
 841         $(call Device/netgear_rbx50)
 842         DEVICE_MODEL := RBR50
 843         DEVICE_VARIANT := v1
 844         NETGEAR_BOARD_ID := RBR50
 845 endef
 846 TARGET_DEVICES += netgear_rbr50
 847
 848 define Device/netgear_rbs50
 849         $(call Device/netgear_rbx50)
 850         DEVICE_MODEL := RBS50
 851         DEVICE_VARIANT := v1
 852         NETGEAR_BOARD_ID := RBS50
 853 endef
 854 TARGET_DEVICES += netgear_rbs50
 855
 856 define Device/netgear_srx60
 857         $(call Device/netgear_orbi)
 858         NETGEAR_HW_ID := 29765352+0+4096+512+2x2+2x2+4x4
 859         KERNEL_SIZE := 3932160
 860         ROOTFS_SIZE := 32243712
 861         IMAGE_SIZE := 36175872
 862 endef
 863
 864 define Device/netgear_srr60
 865         $(call Device/netgear_srx60)
 866         DEVICE_MODEL := SRR60
 867         NETGEAR_BOARD_ID := SRR60
 868 endef
 869 TARGET_DEVICES += netgear_srr60
 870
 871 define Device/netgear_srs60
 872         $(call Device/netgear_srx60)
 873         DEVICE_MODEL := SRS60
 874         NETGEAR_BOARD_ID := SRS60
 875 endef
 876 TARGET_DEVICES += netgear_srs60
 877
 878 define Device/netgear_wac510
 879         $(call Device/FitImage)
 880         $(call Device/UbiFit)
 881         DEVICE_VENDOR := Netgear
 882         DEVICE_MODEL := WAC510
 883         SOC := qcom-ipq4018
 884         DEVICE_DTS_CONFIG := config@5
 885         BLOCKSIZE := 128k
 886         PAGESIZE := 2048
 887         IMAGES += factory.tar
 888         IMAGE/factory.tar := append-ubi | wac5xx-netgear-tar
 889         DEVICE_PACKAGES := uboot-envtools
 890 endef
 891 TARGET_DEVICES += netgear_wac510
 892
 893 define Device/openmesh_a42
 894         $(call Device/FitImageLzma)
 895         DEVICE_VENDOR := OpenMesh
 896         DEVICE_MODEL := A42
 897         SOC := qcom-ipq4018
 898         DEVICE_DTS_CONFIG := config@om.a42
 899         BLOCKSIZE := 64k
 900         KERNEL = kernel-bin | lzma | fit lzma $$(KDIR)/image-$$(DEVICE_DTS).dtb | pad-to $$(BLOCKSIZE)
 901         IMAGE_SIZE := 15616k
 902         IMAGES += factory.bin
 903         IMAGE/factory.bin := append-rootfs | pad-rootfs | openmesh-image ce_type=A42
 904         IMAGE/sysupgrade.bin/squashfs := append-rootfs | pad-rootfs | sysupgrade-tar rootfs=$$$$@ | append-metadata
 905 endef
 906 TARGET_DEVICES += openmesh_a42
 907
 908 define Device/openmesh_a62
 909         $(call Device/FitImageLzma)
 910         DEVICE_VENDOR := OpenMesh
 911         DEVICE_MODEL := A62
 912         SOC := qcom-ipq4019
 913         DEVICE_DTS_CONFIG := config@om.a62
 914         BLOCKSIZE := 64k
 915         KERNEL = kernel-bin | lzma | fit lzma $$(KDIR)/image-$$(DEVICE_DTS).dtb | pad-to $$(BLOCKSIZE)
 916         IMAGE_SIZE := 15552k
 917         IMAGES += factory.bin
 918         IMAGE/factory.bin := append-rootfs | pad-rootfs | openmesh-image ce_type=A62
 919         IMAGE/sysupgrade.bin/squashfs := append-rootfs | pad-rootfs | sysupgrade-tar rootfs=$$$$@ | append-metadata
 920         DEVICE_PACKAGES := ath10k-firmware-qca9888-ct
 921 endef
 922 TARGET_DEVICES += openmesh_a62
 923
 924 define Device/p2w_r619ac
 925         $(call Device/FitzImage)
 926         $(call Device/UbiFit)
 927         DEVICE_VENDOR := P&W
 928         DEVICE_MODEL := R619AC
 929         SOC := qcom-ipq4019
 930         DEVICE_DTS_CONFIG := config@10
 931         BLOCKSIZE := 128k
 932         PAGESIZE := 2048
 933 endef
 934
 935 define Device/p2w_r619ac-64m
 936         $(call Device/p2w_r619ac)
 937         DEVICE_VARIANT := 64M NAND
 938         IMAGES += factory.bin
 939         IMAGE/factory.bin := append-ubi | qsdk-ipq-factory-nand
 940 endef
 941 TARGET_DEVICES += p2w_r619ac-64m
 942
 943 define Device/p2w_r619ac-128m
 944         $(call Device/p2w_r619ac)
 945         DEVICE_VARIANT := 128M NAND
 946 endef
 947 TARGET_DEVICES += p2w_r619ac-128m
 948
 949 define Device/pakedge_wr-1
 950         $(call Device/FitImageLzma)
 951         DEVICE_VENDOR := Pakedge
 952         DEVICE_MODEL := WR-1
 953         DEVICE_DTS_CONFIG := config@ap.dk01.1-c1
 954         SOC := qcom-ipq4018
 955         BLOCKSIZE := 64k
 956         IMAGE_SIZE := 31232k
 957         IMAGE/sysupgrade.bin := append-kernel | pad-to $$$$(BLOCKSIZE) | append-rootfs | pad-rootfs | append-metadata
 958 endef
 959 TARGET_DEVICES += pakedge_wr-1
 960
 961 define Device/plasmacloud_pa1200
 962         $(call Device/FitImageLzma)
 963         DEVICE_VENDOR := Plasma Cloud
 964         DEVICE_MODEL := PA1200
 965         SOC := qcom-ipq4018
 966         DEVICE_DTS_CONFIG := config@pc.pa1200
 967         BLOCKSIZE := 64k
 968         KERNEL = kernel-bin | lzma | fit lzma $$(KDIR)/image-$$(DEVICE_DTS).dtb | pad-to $$(BLOCKSIZE)
 969         IMAGE_SIZE := 15616k
 970         IMAGES += factory.bin
 971         IMAGE/factory.bin := append-rootfs | pad-rootfs | openmesh-image ce_type=PA1200
 972         IMAGE/sysupgrade.bin/squashfs := append-rootfs | pad-rootfs | sysupgrade-tar rootfs=$$$$@ | append-metadata
 973 endef
 974 TARGET_DEVICES += plasmacloud_pa1200
 975
 976 define Device/plasmacloud_pa2200
 977         $(call Device/FitImageLzma)
 978         DEVICE_VENDOR := Plasma Cloud
 979         DEVICE_MODEL := PA2200
 980         SOC := qcom-ipq4019
 981         DEVICE_DTS_CONFIG := config@pc.pa2200
 982         BLOCKSIZE := 64k
 983         KERNEL = kernel-bin | lzma | fit lzma $$(KDIR)/image-$$(DEVICE_DTS).dtb | pad-to $$(BLOCKSIZE)
 984         IMAGE_SIZE := 15552k
 985         IMAGES += factory.bin
 986         IMAGE/factory.bin := append-rootfs | pad-rootfs | openmesh-image ce_type=PA2200
 987         IMAGE/sysupgrade.bin/squashfs := append-rootfs | pad-rootfs | sysupgrade-tar rootfs=$$$$@ | append-metadata
 988         DEVICE_PACKAGES := ath10k-firmware-qca9888-ct
 989 endef
 990 TARGET_DEVICES += plasmacloud_pa2200
 991
 992 define Device/qcom_ap-dk01.1-c1
 993         DEVICE_VENDOR := Qualcomm Atheros
 994         DEVICE_MODEL := AP-DK01.1
 995         DEVICE_VARIANT := C1
 996         BOARD_NAME := ap-dk01.1-c1
 997         SOC := qcom-ipq4019
 998         DEVICE_DTS := qcom-ipq4019-ap.dk01.1-c1
 999         KERNEL_INSTALL := 1
1000         KERNEL_SIZE := 4096k
1001         IMAGE_SIZE := 26624k
1002         $(call Device/FitImage)
1003         IMAGE/sysupgrade.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-rootfs | pad-rootfs | append-metadata
1004         DEFAULT := n
1005 endef
1006 TARGET_DEVICES += qcom_ap-dk01.1-c1
1007
1008 define Device/qcom_ap-dk04.1-c1
1009         $(call Device/FitImage)
1010         $(call Device/UbiFit)
1011         DEVICE_VENDOR := Qualcomm Atheros
1012         DEVICE_MODEL := AP-DK04.1
1013         DEVICE_VARIANT := C1
1014         SOC := qcom-ipq4019
1015         DEVICE_DTS := qcom-ipq4019-ap.dk04.1-c1
1016         KERNEL_INSTALL := 1
1017         KERNEL_SIZE := 4048k
1018         BLOCKSIZE := 128k
1019         PAGESIZE := 2048
1020         BOARD_NAME := ap-dk04.1-c1
1021         DEFAULT := n
1022 endef
1023 TARGET_DEVICES += qcom_ap-dk04.1-c1
1024
1025 define Device/qxwlan_e2600ac-c1
1026         $(call Device/FitImage)
1027         DEVICE_VENDOR := Qxwlan
1028         DEVICE_MODEL := E2600AC
1029         DEVICE_VARIANT := C1
1030         BOARD_NAME := e2600ac-c1
1031         SOC := qcom-ipq4019
1032         IMAGE_SIZE := 31232k
1033         IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
1034 endef
1035 TARGET_DEVICES += qxwlan_e2600ac-c1
1036
1037 define Device/qxwlan_e2600ac-c2
1038         $(call Device/FitImage)
1039         $(call Device/UbiFit)
1040         DEVICE_VENDOR := Qxwlan
1041         DEVICE_MODEL := E2600AC
1042         DEVICE_VARIANT := C2
1043         SOC := qcom-ipq4019
1044         KERNEL_INSTALL := 1
1045         BLOCKSIZE := 128k
1046         PAGESIZE := 2048
1047 endef
1048 TARGET_DEVICES += qxwlan_e2600ac-c2
1049
1050 define Device/sony_ncp-hg100-cellular
1051         $(call Device/FitImage)
1052         DEVICE_VENDOR := Sony
1053         DEVICE_MODEL := NCP-HG100/Cellular
1054         DEVICE_DTS_CONFIG := config@ap.dk04.1-c4
1055         SOC := qcom-ipq4019
1056         KERNEL_SIZE := 8192k
1057         IMAGE_SIZE := 128m
1058         DEVICE_PACKAGES := e2fsprogs kmod-fs-ext4 uqmi
1059 endef
1060 TARGET_DEVICES += sony_ncp-hg100-cellular
1061
1062 define Device/teltonika_rutx10
1063         $(call Device/FitImage)
1064         $(call Device/UbiFit)
1065         DEVICE_VENDOR := Teltonika
1066         DEVICE_MODEL := RUTX10
1067         SOC := qcom-ipq4018
1068         DEVICE_DTS_CONFIG := config@5
1069         KERNEL_INSTALL := 1
1070         BLOCKSIZE := 128k
1071         PAGESIZE := 2048
1072         FILESYSTEMS := squashfs
1073         IMAGE/factory.ubi := append-ubi | qsdk-ipq-factory-nand | append-rutx-metadata
1074         DEVICE_PACKAGES := kmod-bluetooth
1075 endef
1076 # Missing DSA Setup
1077 #TARGET_DEVICES += teltonika_rutx10
1078
1079 define Device/tel_x1pro
1080         $(call Device/FitImage)
1081         DEVICE_VENDOR := Telco
1082         DEVICE_MODEL := X1 Pro
1083         SOC := qcom-ipq4019
1084         KERNEL_SIZE := 4096k
1085         IMAGE_SIZE := 31232k
1086         IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
1087         DEVICE_PACKAGES := kmod-usb-net-qmi-wwan kmod-usb-serial-option uqmi
1088         DEFAULT := n
1089 endef
1090 # Missing DSA Setup
1091 #TARGET_DEVICES += tel_x1pro
1092
1093 define Device/unielec_u4019-32m
1094         $(call Device/FitImage)
1095         DEVICE_VENDOR := Unielec
1096         DEVICE_MODEL := U4019
1097         DEVICE_VARIANT := 32M
1098         BOARD_NAME := u4019-32m
1099         SOC := qcom-ipq4019
1100         KERNEL_SIZE := 4096k
1101         IMAGE_SIZE := 31232k
1102         IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
1103         DEFAULT := n
1104 endef
1105 # Missing DSA Setup
1106 #TARGET_DEVICES += unielec_u4019-32m
1107
1108 define Device/wallys_dr40x9
1109         $(call Device/FitImage)
1110         $(call Device/UbiFit)
1111         DEVICE_VENDOR := Wallys
1112         DEVICE_MODEL := DR40X9
1113         SOC := qcom-ipq40x9
1114         DEVICE_DTS_CONFIG := config@ap.dk07.1-c1
1115         BLOCKSIZE := 128k
1116         PAGESIZE := 2048
1117         DEVICE_PACKAGES := ipq-wifi-wallys_dr40x9
1118 endef
1119 TARGET_DEVICES += wallys_dr40x9
1120
1121 define Device/zte_mf18a
1122         $(call Device/FitImage)
1123         DEVICE_VENDOR := ZTE
1124         DEVICE_MODEL := MF18A
1125         SOC := qcom-ipq4019
1126         DEVICE_DTS_CONFIG := config@ap.dk04.1-c1
1127         BLOCKSIZE := 128k
1128         PAGESIZE := 2048
1129         KERNEL_IN_UBI := 1
1130         DEVICE_PACKAGES := ath10k-firmware-qca99x0-ct
1131 endef
1132 TARGET_DEVICES += zte_mf18a
1133
1134 define Device/zte_mf28x_common
1135         $(call Device/FitzImage)
1136         DEVICE_VENDOR := ZTE
1137         SOC := qcom-ipq4019
1138         DEVICE_DTS_CONFIG := config@ap.dk04.1-c1
1139         BLOCKSIZE := 128k
1140         PAGESIZE := 2048
1141         KERNEL_IN_UBI := 1
1142         DEVICE_PACKAGES := kmod-usb-net-qmi-wwan kmod-usb-serial-option uqmi
1143 endef
1144
1145 define Device/zte_mf286d
1146         $(call Device/zte_mf28x_common)
1147         DEVICE_MODEL := MF286D
1148 endef
1149 TARGET_DEVICES += zte_mf286d
1150
1151 define Device/zte_mf287plus
1152         $(call Device/zte_mf28x_common)
1153         DEVICE_DTS_CONFIG := config@ap.dk01.1-c2
1154         DEVICE_MODEL := MF287Plus
1155         DEVICE_ALT0_VENDOR := ZTE
1156         DEVICE_ALT0_MODEL := MF287
1157         DEVICE_PACKAGES += ipq-wifi-zte_mf287plus
1158         SOC := qcom-ipq4018
1159 #       The recovery image is used to return back to stock (an initramfs-based image
1160 #       that can be flashed to the device via sysupgrade
1161 #       The factory image is used to install from the stock firmware by using an
1162 #       exploit for the web interface
1163         IMAGES += factory.bin recovery.bin
1164         IMAGE/factory.bin  := append-ubi
1165         IMAGE/recovery.bin := append-squashfs4-fakeroot | sysupgrade-tar kernel=$$$$(BIN_DIR)/openwrt-$$(BOARD)$$(if $$(SUBTARGET),-$$(SUBTARGET))-$$(DEVICE_NAME)-initramfs-zImage.itb rootfs=$$$$@ | append-metadata
1166 endef
1167 TARGET_DEVICES += zte_mf287plus
1168
1169 define Device/zte_mf289f
1170         $(call Device/zte_mf28x_common)
1171         DEVICE_MODEL := MF289F
1172         DEVICE_PACKAGES += ath10k-firmware-qca9984-ct
1173 endef
1174 TARGET_DEVICES += zte_mf289f
1175
1176 define Device/zyxel_nbg6617
1177         $(call Device/FitImageLzma)
1178         DEVICE_VENDOR := ZyXEL
1179         DEVICE_MODEL := NBG6617
1180         SOC := qcom-ipq4018
1181         KERNEL_SIZE := 4096k
1182         ROOTFS_SIZE := 24960k
1183         RAS_BOARD := NBG6617
1184         RAS_ROOTFS_SIZE := 19840k
1185         RAS_VERSION := "$(VERSION_DIST) $(REVISION)"
1186         IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
1187         IMAGES += factory.bin
1188 #       The ZyXEL firmware allows flashing thru the web-gui only when the rootfs is
1189 #       at least as large as the one of the initial firmware image (not the current
1190 #       one on the device). This only applies to the Web-UI, the bootlaoder ignores
1191 #       this minimum-size. However, the larger image can be flashed both ways.
1192         IMAGE/factory.bin := append-rootfs | pad-rootfs | pad-to 64k | check-size $$$$(ROOTFS_SIZE) | zyxel-ras-image separate-kernel
1193         IMAGE/sysupgrade.bin/squashfs := append-rootfs | pad-rootfs | check-size $$$$(ROOTFS_SIZE) | sysupgrade-tar rootfs=$$$$@ | append-metadata
1194         DEVICE_PACKAGES := kmod-usb-ledtrig-usbport
1195 endef
1196 TARGET_DEVICES += zyxel_nbg6617
1197
1198 define Device/zyxel_wre6606
1199         $(call Device/FitImage)
1200         DEVICE_VENDOR := ZyXEL
1201         DEVICE_MODEL := WRE6606
1202         DEVICE_DTS_CONFIG := config@4
1203         SOC := qcom-ipq4018
1204         IMAGE_SIZE := 13184k
1205         IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | check-size | append-metadata
1206         DEVICE_PACKAGES := -kmod-ath10k-ct kmod-ath10k-ct-smallbuffers
1207 endef
1208 # Missing DSA Setup
1209 #TARGET_DEVICES += zyxel_wre6606