target/linux/ep93xx/patches-3.10/003-ep93xx_touchscreen.patch

   1 ---
   2  arch/arm/mach-ep93xx/include/mach/hardware.h   |    1
   3  arch/arm/mach-ep93xx/include/mach/regs_touch.h |   95 ++
   4  drivers/input/touchscreen/Kconfig              |    5
   5  drivers/input/touchscreen/Makefile             |    1
   6  drivers/input/touchscreen/ep93xx_ts.c          | 1117 +++++++++++++++++++++++++
   7  drivers/input/touchscreen/ep93xx_ts.h          |   53 +
   8  6 files changed, 1272 insertions(+)
   9
  10 --- a/drivers/input/touchscreen/Kconfig
  11 +++ b/drivers/input/touchscreen/Kconfig
  12 @@ -235,6 +235,15 @@ config TOUCHSCREEN_EGALAX
  13           To compile this driver as a module, choose M here: the
  14           module will be called egalax_ts.
  15
  16 +config TOUCHSCREEN_EP93XX
  17 +       tristate "EP93xx Touchscreen"
  18 +       depends on ARM && INPUT && ARCH_EP93XX
  19 +       help
  20 +         Say Y here to enable support for EP93xx touch screen.
  21 +
  22 +         To compile this driver as a module, choose M here:
  23 +         the module will be called ep93xx_ts.
  24 +
  25  config TOUCHSCREEN_FUJITSU
  26         tristate "Fujitsu serial touchscreen"
  27         select SERIO
  28 --- a/drivers/input/touchscreen/Makefile
  29 +++ b/drivers/input/touchscreen/Makefile
  30 @@ -29,6 +29,7 @@ obj-$(CONFIG_TOUCHSCREEN_GUNZE)               += gunz
  31  obj-$(CONFIG_TOUCHSCREEN_EETI)         += eeti_ts.o
  32  obj-$(CONFIG_TOUCHSCREEN_ELO)          += elo.o
  33  obj-$(CONFIG_TOUCHSCREEN_EGALAX)       += egalax_ts.o
  34 +obj-$(CONFIG_TOUCHSCREEN_EP93XX)       += ep93xx_ts.o
  35  obj-$(CONFIG_TOUCHSCREEN_FUJITSU)      += fujitsu_ts.o
  36  obj-$(CONFIG_TOUCHSCREEN_ILI210X)      += ili210x.o
  37  obj-$(CONFIG_TOUCHSCREEN_INEXIO)       += inexio.o
  38 --- /dev/null
  39 +++ b/drivers/input/touchscreen/ep93xx_ts.c
  40 @@ -0,0 +1,1022 @@
  41 +/*
  42 + * linux/drivers/input/touchscreen/ep93xx_ts.c
  43 + *
  44 + * Copyright (C) 2003-2004 Cirrus Corp.
  45 + *
  46 + * This program is free software; you can redistribute it and/or modify
  47 + * it under the terms of the GNU General Public License version 2 as
  48 + * published by the Free Software Foundation.
  49 + */
  50 +
  51 +#include <linux/module.h>
  52 +#include <linux/types.h>
  53 +#include <linux/delay.h>
  54 +#include <linux/wait.h>
  55 +#include <linux/fs.h>
  56 +#include <linux/sched.h>
  57 +#include <linux/poll.h>
  58 +#include <linux/miscdevice.h>
  59 +#include <linux/init.h>
  60 +#include <linux/compiler.h>
  61 +#include <linux/timer.h>
  62 +#include <linux/interrupt.h>
  63 +#include <linux/syscalls.h>
  64 +#include <linux/input.h>
  65 +#include <linux/semaphore.h>
  66 +#include <asm/irq.h>
  67 +#include <mach/hardware.h>
  68 +#include <asm/io.h>
  69 +#include "../../../arch/arm/mach-ep93xx/soc.h"
  70 +
  71 +/* This stuff should be in ep93xx-regs.h */
  72 +#define EP93XX_TOUCHSCREEN_REG(x)      (EP93XX_TOUCHSCREEN_BASE + (x))
  73 +/* R/W touchscreen controller setup control register. */
  74 +#define EP93XX_TOUCHSCREEN_SETUP       EP93XX_TOUCHSCREEN_REG(0x00)
  75 +/* R/W touchscreen controller max/min register. */
  76 +#define EP93XX_TOUCHSCREEN_XYMAXMIN    EP93XX_TOUCHSCREEN_REG(0x04)
  77 +/* R   touchscreen controller result register. */
  78 +#define EP93XX_TOUCHSCREEN_XYRESULT    EP93XX_TOUCHSCREEN_REG(0x08)
  79 +/* LOCKED R/W touchscreen Switch Matrix control register. */
  80 +#define EP93XX_TOUCHSCREEN_DISCHARGE   EP93XX_TOUCHSCREEN_REG(0x0C)
  81 +#define EP93XX_TOUCHSCREEN_XSAMPLE     EP93XX_TOUCHSCREEN_REG(0x10)
  82 +#define EP93XX_TOUCHSCREEN_YSAMPLE     EP93XX_TOUCHSCREEN_REG(0x14)
  83 +#define EP93XX_TOUCHSCREEN_DIRECT      EP93XX_TOUCHSCREEN_REG(0x18)
  84 +#define EP93XX_TOUCHSCREEN_DETECT      EP93XX_TOUCHSCREEN_REG(0x1C)
  85 +/*  NA    R/W touchscreen software lock register. */
  86 +#define EP93XX_TOUCHSCREEN_SWLOCK      EP93XX_TOUCHSCREEN_REG(0x20)
  87 +/* R/W touchscreen setup control register #2. */
  88 +#define EP93XX_TOUCHSCREEN_SETUP2      EP93XX_TOUCHSCREEN_REG(0x24)
  89 +
  90 +/* These are duplicated in mach-ep93xx/core.c */
  91 +#define EP93XX_TIMER_REG(x)    (EP93XX_TIMER_BASE + (x))
  92 +#define EP93XX_TIMER2_LOAD     EP93XX_TIMER_REG(0x20)
  93 +#define EP93XX_TIMER2_VALUE    EP93XX_TIMER_REG(0x24)
  94 +#define EP93XX_TIMER2_CONTROL  EP93XX_TIMER_REG(0x28)
  95 +#define EP93XX_TIMER2_CLEAR    EP93XX_TIMER_REG(0x2c)
  96 +
  97 +/*
  98 + * Register bit definitions
  99 + */
 100 +#define TSSETUP_SDLY_MASK      0x000003FF
 101 +#define TSSETUP_SDLY_SHIFT     0
 102 +#define TSSETUP_NSMP_4         0x00000000
 103 +#define TSSETUP_NSMP_8         0x00000400
 104 +#define TSSETUP_NSMP_16                0x00000800
 105 +#define TSSETUP_NSMP_32                0x00000C00
 106 +#define TSSETUP_NSMP_MASK      0x00000C00
 107 +#define TSSETUP_DEV_4          0x00000000
 108 +#define TSSETUP_DEV_8          0x00001000
 109 +#define TSSETUP_DEV_12         0x00002000
 110 +#define TSSETUP_DEV_16         0x00003000
 111 +#define TSSETUP_DEV_24         0x00004000
 112 +#define TSSETUP_DEV_32         0x00005000
 113 +#define TSSETUP_DEV_64         0x00006000
 114 +#define TSSETUP_DEV_128                0x00007000
 115 +#define TSSETUP_ENABLE         0x00008000
 116 +#define TSSETUP_DLY_MASK       0x03FF0000
 117 +#define TSSETUP_DLY_SHIFT      16
 118 +#define TSSETUP_TDTCT          0x80000000
 119 +
 120 +#define TSMAXMIN_XMIN_MASK     0x000000FF
 121 +#define TSMAXMIN_XMIN_SHIFT    0
 122 +#define TSMAXMIN_YMIN_MASK     0x0000FF00
 123 +#define TSMAXMIN_YMIN_SHIFT    8
 124 +#define TSMAXMIN_XMAX_MASK     0x00FF0000
 125 +#define TSMAXMIN_XMAX_SHIFT    16
 126 +#define TSMAXMIN_YMAX_MASK     0xFF000000
 127 +#define TSMAXMIN_YMAX_SHIFT    24
 128 +
 129 +#define TSXYRESULT_X_MASK      0x00000FFF
 130 +#define TSXYRESULT_X_SHIFT     0
 131 +#define TSXYRESULT_AD_MASK     0x0000FFFF
 132 +#define TSXYRESULT_AD_SHIFT    0
 133 +#define TSXYRESULT_Y_MASK      0x0FFF0000
 134 +#define TSXYRESULT_Y_SHIFT     16
 135 +#define TSXYRESULT_SDR         0x80000000
 136 +
 137 +#define TSX_SAMPLE_MASK                0x00003FFF
 138 +#define TSX_SAMPLE_SHIFT       0x00
 139 +#define TSY_SAMPLE_MASK                0x3FFF0000
 140 +#define TSY_SAMPLE_SHIFT       0x10
 141 +
 142 +#define TSSETUP2_TINT          0x00000001
 143 +#define TSSETUP2_NICOR         0x00000002
 144 +#define TSSETUP2_PINT          0x00000004
 145 +#define TSSETUP2_PENSTS                0x00000008
 146 +#define TSSETUP2_PINTEN                0x00000010
 147 +#define TSSETUP2_DEVINT                0x00000020
 148 +#define TSSETUP2_DINTEN                0x00000040
 149 +#define TSSETUP2_DTMEN         0x00000080
 150 +#define TSSETUP2_DISDEV                0x00000100
 151 +#define TSSETUP2_NSIGND                0x00000200
 152 +#define TSSETUP2_S28EN         0x00000400
 153 +#define TSSETUP2_RINTEN                0x00000800
 154 +
 155 +#define TSXYRESULT_SDR         0x80000000
 156 +
 157 +/*
 158 + * These are used as trigger levels to know when we have pen up/down.
 159 + * The rules:
 160 + * 1.  TS_HEAVY_INV_PRESSURE < TS_LIGHT_INV_PRESSURE because these
 161 + *    are Inverse pressure.
 162 + * 2.  Any touch lighter than TS_LIGHT_INV_PRESSURE is a pen up.
 163 + * 3.  Any touch heavier than TS_HEAVY_INV_PRESSURE is a pen down.
 164 + */
 165 +#define TS_HEAVY_INV_PRESSURE 0xFE0 /* C00 */
 166 +#define TS_LIGHT_INV_PRESSURE 0xFFF /* e00 */
 167 +
 168 +/*
 169 + * If the x, y, or inverse pressure changes more than these values
 170 + * between two succeeding points, the point is not reported.
 171 + */
 172 +#define TS_MAX_VALID_XY_CHANGE         0x300
 173 +#define TS_MAX_VALID_PRESSURE_CHANGE   0x100
 174 +
 175 +/*
 176 + * This is the minimum Z1 Value that is valid.
 177 + */
 178 +#define MIN_Z1_VALUE 0x50
 179 +
 180 +/*
 181 + * Settling delay for taking each ADC measurement.  Increase this
 182 + * if ts is jittery.
 183 + */
 184 +#define EP93XX_TS_ADC_DELAY_USEC 2000
 185 +
 186 +/*
 187 + * Delay between TS points.
 188 + */
 189 +#define EP93XX_TS_PER_POINT_DELAY_USEC 10000
 190 +
 191 +/*
 192 + * A few more macros...
 193 + */
 194 +#define TSSETUP_DEFAULT  (TSSETUP_NSMP_32 | TSSETUP_DEV_64 |  \
 195 +                         ((128<<TSSETUP_SDLY_SHIFT) & TSSETUP_SDLY_MASK) | \
 196 +                         ((128<<TSSETUP_DLY_SHIFT)  & TSSETUP_DLY_MASK))
 197 +
 198 +#define TSSETUP2_DEFAULT (TSSETUP2_NSIGND)
 199 +
 200 +/*
 201 + * For now, we use one of the minor numbers from the local/experimental
 202 + * range.
 203 + */
 204 +#define EP93XX_TS_MINOR 240
 205 +
 206 +/*
 207 + * Static Declarations
 208 + */
 209 +static unsigned int   guiLastX, guiLastY;
 210 +static unsigned int   guiLastInvPressure;
 211 +
 212 +struct TouchScreenSample
 213 +{
 214 +    int currentX;
 215 +    int currentY;
 216 +    int currentButton;
 217 +    int currentPressure;
 218 +    struct timeval currentTime;
 219 +};
 220 +
 221 +/*
 222 + * This must match the structure in tslib.
 223 + */
 224 +struct ts_sample {
 225 +    int x;
 226 +    int y;
 227 +    unsigned int pressure;
 228 +    struct timeval tv;
 229 +};
 230 +
 231 +static struct TouchScreenSample gSample;
 232 +static int bFreshTouchData;
 233 +static int bCurrentPenDown;
 234 +
 235 +static DECLARE_WAIT_QUEUE_HEAD(queue);
 236 +static DEFINE_SEMAPHORE(open_sem);
 237 +static DEFINE_SPINLOCK(event_buffer_lock);
 238 +static struct fasync_struct *ep93xx_fasync;
 239 +
 240 +/*
 241 + * Typedef Declarations
 242 + */
 243 +typedef enum {
 244 +    TS_MODE_UN_INITIALIZED,
 245 +    TS_MODE_HARDWARE_SCAN,
 246 +    TS_MODE_SOFT_SCAN
 247 +} ts_mode_t;
 248 +
 249 +static ts_mode_t gScanningMode;
 250 +
 251 +typedef enum{
 252 +    TS_STATE_STOPPED = 0,
 253 +    TS_STATE_Z1,
 254 +    TS_STATE_Z2,
 255 +    TS_STATE_Y,
 256 +    TS_STATE_X,
 257 +    TS_STATE_DONE
 258 +} ts_states_t;
 259 +
 260 +typedef struct
 261 +{
 262 +    unsigned int uiX;
 263 +    unsigned int uiY;
 264 +    unsigned int uiZ1;
 265 +    unsigned int uiZ2;
 266 +    ts_states_t  state;
 267 +} ts_struct_t;
 268 +
 269 +static ts_struct_t sTouch;
 270 +
 271 +/*
 272 + * From the spec, here's how to set up the touch screen's switch registers.
 273 + */
 274 +typedef struct
 275 +{
 276 +    unsigned int uiDetect;
 277 +    unsigned int uiDischarge;
 278 +    unsigned int uiXSample;
 279 +    unsigned int uiYSample;
 280 +    unsigned int uiSwitchZ1;
 281 +    unsigned int uiSwitchZ2;
 282 +}SwitchStructType;
 283 +
 284 +/*
 285 + * Here's the switch settings for a 4-wire touchscreen.  See the spec
 286 + * for how to handle a 4, 7, or 8-wire.
 287 + */
 288 +const static SwitchStructType sSwitchSettings =
 289 +/* s28en=0 */
 290 +/*   TSDetect    TSDischarge TSXSample   TSYSample   SwitchZ1    SwitchZ2 */
 291 +    {0x00403604, 0x0007fe04, 0x00081604, 0x00104601, 0x00101601, 0x00101608};
 292 +
 293 +/*
 294 + * Function declarations
 295 + */
 296 +static void ep93xx_ts_set_direct(unsigned int uiADCSwitch);
 297 +static irqreturn_t ep93xx_ts_isr(int irq, void *dev_id);
 298 +static irqreturn_t ep93xx_timer2_isr(int irq, void *dev_id);
 299 +static void ee93xx_ts_evt_add(int button, int dX, int dY, int Pressure);
 300 +static ssize_t ep93xx_ts_read(struct file *filp, char *buf,
 301 +       size_t count, loff_t *l);
 302 +static unsigned int ep93xx_ts_poll(struct file *filp, poll_table *wait);
 303 +static int ep93xx_ts_open(struct inode *inode, struct file *filp);
 304 +static int ep93xx_ts_fasync(int fd, struct file *filp, int on);
 305 +static int ep93xx_ts_release(struct inode *inode, struct file *filp);
 306 +static ssize_t ep93xx_ts_write(struct file *file, const char *buffer,
 307 +               size_t count, loff_t *ppos);
 308 +static void ep93xx_ts_setup(void);
 309 +static void ep93xx_ts_shutdown(void);
 310 +int __init ep93xx_ts_init(void);
 311 +void __exit ep93xx_ts_exit(void);
 312 +static unsigned int CalculateInvPressure(void);
 313 +static unsigned int ADCGetData(unsigned int uiSamples, unsigned int uiMaxDiff);
 314 +static void TS_Soft_Scan_Mode(void);
 315 +static void TS_Hardware_Scan_Mode(void);
 316 +static void ProcessPointData(void);
 317 +static void Set_Timer2_uSec(unsigned int Delay_mSec);
 318 +static void Stop_Timer2(void);
 319 +
 320 +/*
 321 + *  ep93xx_ts_isr
 322 + */
 323 +static irqreturn_t ep93xx_ts_isr(int irq, void *dev_id)
 324 +{
 325 +    /*
 326 +     * Note that we don't clear the interrupt here.  The interrupt
 327 +     * gets cleared in TS_Soft_Scan_Mode when the TS ENABLE
 328 +     * bit is cleared.
 329 +     */
 330 +
 331 +    /*
 332 +     * Set the ts to manual polling mode and schedule a callback.
 333 +     * That way we can return from the isr in a reasonable amount of
 334 +     * time and process the touch in the callback after a brief delay.
 335 +     */
 336 +    TS_Soft_Scan_Mode();
 337 +
 338 +    return(IRQ_HANDLED);
 339 +}
 340 +
 341 +/*
 342 + * Save the current ts 'event' in an atomic fashion.
 343 + */
 344 +static void ee93xx_ts_evt_add(int buttons, int iX, int iY, int iPressure)
 345 +{
 346 +    /*
 347 +     * Note the event, but use spinlocks to keep it from getting
 348 +     * halfway read if we get interrupted.
 349 +     */
 350 +
 351 +    spin_lock(&event_buffer_lock);
 352 +
 353 +    gSample.currentX        = iX;
 354 +    gSample.currentY        = iY;
 355 +    gSample.currentButton   = buttons;
 356 +    gSample.currentPressure = iPressure;
 357 +    bFreshTouchData         = 1;
 358 +    do_gettimeofday(&gSample.currentTime);
 359 +
 360 +    spin_unlock(&event_buffer_lock);
 361 +
 362 +    kill_fasync(&ep93xx_fasync, SIGIO, POLL_IN);
 363 +    wake_up_interruptible(&queue);
 364 +}
 365 +
 366 +
 367 +static ssize_t ep93xx_ts_read(struct file *filp, char *buf, size_t count, loff_t *l)
 368 +{
 369 +    unsigned short data[3];
 370 +    struct  ts_sample   ts_data;
 371 +    int     iReturn = -EFAULT;
 372 +
 373 +    if (!bFreshTouchData)
 374 +    {
 375 +       iReturn = 0;
 376 +    }
 377 +    else if (count == sizeof(data))
 378 +    {
 379 +       spin_lock_irq(&event_buffer_lock);
 380 +       bFreshTouchData = 0;
 381 +       data[0] = gSample.currentX;
 382 +       data[1] = gSample.currentY;
 383 +       data[2] = gSample.currentButton;
 384 +
 385 +       spin_unlock_irq(&event_buffer_lock);
 386 +
 387 +       if (copy_to_user(buf, data, sizeof data))
 388 +           return -EFAULT;
 389 +
 390 +       count -= sizeof(data);
 391 +
 392 +       /* return the # of bytes that got read */
 393 +       iReturn = sizeof(data) ;
 394 +    }
 395 +    else if (count == sizeof(struct ts_sample) )
 396 +    {
 397 +       spin_lock_irq(&event_buffer_lock);
 398 +       bFreshTouchData = 0;
 399 +       ts_data.x           = gSample.currentX;
 400 +       ts_data.y           = gSample.currentY;
 401 +       ts_data.pressure    = gSample.currentPressure;
 402 +       ts_data.tv          = gSample.currentTime;
 403 +       spin_unlock_irq(&event_buffer_lock);
 404 +
 405 +       if (copy_to_user(buf, &ts_data, sizeof(struct ts_sample)))
 406 +       {
 407 +           iReturn = -EFAULT;
 408 +       }
 409 +       else
 410 +       {
 411 +           count -= sizeof(ts_data);
 412 +           iReturn = sizeof(ts_data);
 413 +       }
 414 +    }
 415 +
 416 +    return iReturn;
 417 +}
 418 +
 419 +static unsigned int ep93xx_ts_poll(struct file *filp, poll_table *wait)
 420 +{
 421 +    poll_wait(filp, &queue, wait);
 422 +
 423 +    if (bFreshTouchData)
 424 +    {
 425 +       return POLLIN | POLLRDNORM;
 426 +    }
 427 +
 428 +    return 0;
 429 +}
 430 +
 431 +static int ep93xx_ts_open(struct inode *inode, struct file *filp)
 432 +{
 433 +    if (down_trylock(&open_sem))
 434 +    {
 435 +       return -EBUSY;
 436 +    }
 437 +
 438 +    ep93xx_ts_setup();
 439 +
 440 +    return 0;
 441 +}
 442 +
 443 +/*
 444 + * Asynchronous I/O support.
 445 + */
 446 +static int ep93xx_ts_fasync(int fd, struct file *filp, int on)
 447 +{
 448 +    int retval;
 449 +
 450 +    retval = fasync_helper(fd, filp, on, &ep93xx_fasync);
 451 +    if (retval < 0)
 452 +    {
 453 +       return retval;
 454 +    }
 455 +
 456 +    return 0;
 457 +}
 458 +
 459 +static int ep93xx_ts_release(struct inode *inode, struct file *filp)
 460 +{
 461 +    Stop_Timer2();
 462 +
 463 +    /*
 464 +     * Call our async I/O support to request that this file
 465 +     * cease to be used for async I/O.
 466 +     */
 467 +    ep93xx_ts_fasync(-1, filp, 0);
 468 +
 469 +    ep93xx_ts_shutdown();
 470 +
 471 +    up(&open_sem);
 472 +
 473 +    return 0;
 474 +}
 475 +
 476 +static ssize_t ep93xx_ts_write(struct file *file, const char *buffer, size_t count,
 477 +              loff_t *ppos)
 478 +{
 479 +    return -EINVAL;
 480 +}
 481 +
 482 +
 483 +static int ep93xx_ts_ioctl(struct inode *inode, struct file *file, uint command, ulong u)
 484 +{
 485 +    static const int         version = EV_VERSION;
 486 +    static const u_int32_t   bit =(1 << EV_ABS);
 487 +    static const u_int32_t   absbit = (1 << ABS_X) | (1 << ABS_Y) | (1 << ABS_PRESSURE);
 488 +    int         iReturn ;
 489 +    int         i = 0;
 490 +
 491 +    switch(command)
 492 +    {
 493 +       case EVIOCGVERSION:
 494 +           i = copy_to_user((void __user *)u, (void *)version, sizeof(version));
 495 +           iReturn = i ? -EFAULT : 0;
 496 +           break;
 497 +
 498 +       case EVIOCGBIT(0,sizeof(u_int32_t) * 8) :
 499 +           i = copy_to_user((void __user *)u, (void *)bit, sizeof(bit));
 500 +           iReturn = i ? -EFAULT : 0;
 501 +           break;
 502 +
 503 +       case EVIOCGBIT(EV_ABS, sizeof(absbit) * 8):
 504 +           i = copy_to_user((void __user *)u, (void *)absbit, sizeof(absbit));
 505 +           iReturn = i ? -EFAULT : 0;
 506 +           break;
 507 +       default:
 508 +           iReturn = -1;
 509 +           break;
 510 +    }
 511 +
 512 +    return iReturn;
 513 +}
 514 +
 515 +static struct file_operations ep93xx_ts_fops = {
 516 +    owner:      THIS_MODULE,
 517 +    read:       ep93xx_ts_read,
 518 +    write:      ep93xx_ts_write,
 519 +    poll:       ep93xx_ts_poll,
 520 +    open:       ep93xx_ts_open,
 521 +    unlocked_ioctl:      ep93xx_ts_ioctl,
 522 +    release:    ep93xx_ts_release,
 523 +    fasync:     ep93xx_ts_fasync,
 524 +};
 525 +
 526 +static struct miscdevice ep93xx_ts_miscdev =
 527 +{
 528 +       EP93XX_TS_MINOR,
 529 +       "ep93xx_ts",
 530 +       &ep93xx_ts_fops
 531 +};
 532 +
 533 +void ep93xx_ts_setup(void)
 534 +{
 535 +    unsigned int uiKTDIV, uiTSXYMaxMin;
 536 +
 537 +    /*
 538 +     * Set the TSEN bit in KTDIV so that we are enabling the clock
 539 +     * for the touchscreen.
 540 +     */
 541 +    uiKTDIV = __raw_readl(EP93XX_SYSCON_KEYTCHCLKDIV);
 542 +    uiKTDIV |= EP93XX_SYSCON_KEYTCHCLKDIV_TSEN;
 543 +    ep93xx_syscon_swlocked_write(uiKTDIV, EP93XX_SYSCON_KEYTCHCLKDIV);
 544 +
 545 +    /*
 546 +     * Program the EP93XX_TOUCHSCREEN_SETUP and TSSetup2 registers.
 547 +     */
 548 +    __raw_writel(TSSETUP_DEFAULT, EP93XX_TOUCHSCREEN_SETUP);
 549 +    __raw_writel(TSSETUP2_DEFAULT, EP93XX_TOUCHSCREEN_SETUP2);
 550 +
 551 +    /*
 552 +     * Set the the touch settings.
 553 +     */
 554 +    __raw_writel(0xaa, EP93XX_TOUCHSCREEN_SWLOCK);
 555 +    __raw_writel(sSwitchSettings.uiDischarge, EP93XX_TOUCHSCREEN_DIRECT);
 556 +
 557 +    __raw_writel(0xaa, EP93XX_TOUCHSCREEN_SWLOCK);
 558 +    __raw_writel(sSwitchSettings.uiDischarge, EP93XX_TOUCHSCREEN_DISCHARGE);
 559 +
 560 +    __raw_writel(0xaa, EP93XX_TOUCHSCREEN_SWLOCK);
 561 +    __raw_writel(sSwitchSettings.uiSwitchZ1, EP93XX_TOUCHSCREEN_XSAMPLE);
 562 +
 563 +    __raw_writel(0xaa, EP93XX_TOUCHSCREEN_SWLOCK);
 564 +    __raw_writel(sSwitchSettings.uiSwitchZ2, EP93XX_TOUCHSCREEN_YSAMPLE);
 565 +
 566 +    __raw_writel(0xaa, EP93XX_TOUCHSCREEN_SWLOCK);
 567 +    __raw_writel(sSwitchSettings.uiDetect, EP93XX_TOUCHSCREEN_DETECT);
 568 +
 569 +    /*
 570 +     * X,YMin set to 0x40 = have to drag that many pixels for a new irq.
 571 +     * X,YMax set to 0x40 = 1024 pixels is the maximum movement within the
 572 +     * time scan limit.
 573 +     */
 574 +    uiTSXYMaxMin =  (50   << TSMAXMIN_XMIN_SHIFT) & TSMAXMIN_XMIN_MASK;
 575 +    uiTSXYMaxMin |= (50   << TSMAXMIN_YMIN_SHIFT) & TSMAXMIN_YMIN_MASK;
 576 +    uiTSXYMaxMin |= (0xff << TSMAXMIN_XMAX_SHIFT) & TSMAXMIN_XMAX_MASK;
 577 +    uiTSXYMaxMin |= (0xff << TSMAXMIN_YMAX_SHIFT) & TSMAXMIN_YMAX_MASK;
 578 +    __raw_writel(uiTSXYMaxMin, EP93XX_TOUCHSCREEN_XYMAXMIN);
 579 +
 580 +    bCurrentPenDown = 0;
 581 +    bFreshTouchData = 0;
 582 +    guiLastX = 0;
 583 +    guiLastY = 0;
 584 +    guiLastInvPressure = 0xffffff;
 585 +
 586 +    /*
 587 +     * Enable the touch screen scanning engine.
 588 +     */
 589 +    TS_Hardware_Scan_Mode();
 590 +}
 591 +
 592 +/*
 593 + * ep93xx_ts_shutdown
 594 + *
 595 + */
 596 +static void
 597 +ep93xx_ts_shutdown(void)
 598 +{
 599 +    unsigned int uiKTDIV;
 600 +
 601 +    sTouch.state = TS_STATE_STOPPED;
 602 +    Stop_Timer2();
 603 +
 604 +    /*
 605 +     * Disable the scanning engine.
 606 +     */
 607 +    __raw_writel(0, EP93XX_TOUCHSCREEN_SETUP);
 608 +    __raw_writel(0, EP93XX_TOUCHSCREEN_SETUP2);
 609 +
 610 +    /*
 611 +     * Clear the TSEN bit in KTDIV so that we are disabling the clock
 612 +     * for the touchscreen.
 613 +     */
 614 +    uiKTDIV = __raw_readl(EP93XX_SYSCON_KEYTCHCLKDIV);
 615 +    uiKTDIV &= ~EP93XX_SYSCON_KEYTCHCLKDIV_TSEN;
 616 +    ep93xx_syscon_swlocked_write(uiKTDIV, EP93XX_SYSCON_KEYTCHCLKDIV);
 617 +
 618 +} /* ep93xx_ts_shutdown */
 619 +
 620 +static irqreturn_t ep93xx_timer2_isr(int irq, void *dev_id)
 621 +{
 622 +    switch(sTouch.state)
 623 +    {
 624 +       case TS_STATE_STOPPED:
 625 +           TS_Hardware_Scan_Mode();
 626 +           break;
 627 +
 628 +       /*
 629 +        * Get the Z1 value for pressure measurement and set up
 630 +        * the switch register for getting the Z2 measurement.
 631 +        */
 632 +       case TS_STATE_Z1:
 633 +           Set_Timer2_uSec(EP93XX_TS_ADC_DELAY_USEC);
 634 +           sTouch.uiZ1 = ADCGetData(2, 200);
 635 +           ep93xx_ts_set_direct(sSwitchSettings.uiSwitchZ2);
 636 +           sTouch.state = TS_STATE_Z2;
 637 +           break;
 638 +
 639 +       /*
 640 +        * Get the Z2 value for pressure measurement and set up
 641 +        * the switch register for getting the Y measurement.
 642 +        */
 643 +       case TS_STATE_Z2:
 644 +           sTouch.uiZ2 = ADCGetData(2, 200);
 645 +           ep93xx_ts_set_direct(sSwitchSettings.uiYSample);
 646 +           sTouch.state = TS_STATE_Y;
 647 +           break;
 648 +
 649 +       /*
 650 +        * Get the Y value and set up the switch register for
 651 +        * getting the X measurement.
 652 +        */
 653 +       case TS_STATE_Y:
 654 +           sTouch.uiY = ADCGetData(4, 20);
 655 +           ep93xx_ts_set_direct(sSwitchSettings.uiXSample);
 656 +           sTouch.state = TS_STATE_X;
 657 +           break;
 658 +
 659 +       /*
 660 +        * Read the X value.  This is the last of the 4 adc values
 661 +        * we need so we continue on to process the data.
 662 +        */
 663 +       case TS_STATE_X:
 664 +           Stop_Timer2();
 665 +
 666 +           sTouch.uiX = ADCGetData(4, 20);
 667 +
 668 +           __raw_writel(0xaa, EP93XX_TOUCHSCREEN_SWLOCK);
 669 +           __raw_writel(sSwitchSettings.uiDischarge, EP93XX_TOUCHSCREEN_DIRECT);
 670 +
 671 +           sTouch.state = TS_STATE_DONE;
 672 +
 673 +           /*
 674 +            * Process this set of ADC readings.
 675 +            */
 676 +           ProcessPointData();
 677 +
 678 +           break;
 679 +
 680 +       /*
 681 +        * Shouldn't get here.  But if we do, we can recover...
 682 +        */
 683 +       case TS_STATE_DONE:
 684 +           TS_Hardware_Scan_Mode();
 685 +           break;
 686 +    }
 687 +
 688 +    /*
 689 +     * Clear the timer2 interrupt.
 690 +     */
 691 +    __raw_writel(1, EP93XX_TIMER2_CLEAR);
 692 +    return(IRQ_HANDLED);
 693 +}
 694 +
 695 +/*---------------------------------------------------------------------
 696 + * ProcessPointData
 697 + *
 698 + * This routine processes the ADC data into usable point data and then
 699 + * puts the driver into hw or sw scanning mode before returning.
 700 + *
 701 + * We calculate inverse pressure (lower number = more pressure) then
 702 + * do a hystheresis with the two pressure values 'light' and 'heavy'.
 703 + *
 704 + * If we are above the light, we have pen up.
 705 + * If we are below the heavy we have pen down.
 706 + * As long as the pressure stays below the light, pen stays down.
 707 + * When we get above the light again, pen goes back up.
 708 + *
 709 + */
 710 +static void ProcessPointData(void)
 711 +{
 712 +    int  bValidPoint = 0;
 713 +    unsigned int   uiXDiff, uiYDiff, uiInvPressureDiff;
 714 +    unsigned int   uiInvPressure;
 715 +
 716 +    /*
 717 +     * Calculate the current pressure.
 718 +     */
 719 +    uiInvPressure = CalculateInvPressure();
 720 +
 721 +    /*
 722 +     * If pen pressure is so light that it is greater than the 'max' setting
 723 +     * then we consider this to be a pen up.
 724 +     */
 725 +    if (uiInvPressure >= TS_LIGHT_INV_PRESSURE)
 726 +    {
 727 +       bCurrentPenDown = 0;
 728 +       ee93xx_ts_evt_add(0, guiLastX, guiLastY, 0);
 729 +       TS_Hardware_Scan_Mode();
 730 +       return;
 731 +    }
 732 +
 733 +    /*
 734 +     * Hysteresis:
 735 +     * If the pen pressure is hard enough to be less than the 'min' OR
 736 +     * the pen is already down and is still less than the 'max'...
 737 +     */
 738 +    if ((uiInvPressure < TS_HEAVY_INV_PRESSURE) ||
 739 +       (bCurrentPenDown && (uiInvPressure < TS_LIGHT_INV_PRESSURE)))
 740 +    {
 741 +       if (bCurrentPenDown)
 742 +       {
 743 +           /*
 744 +            * If pen was previously down, check the difference between
 745 +            * the last sample and this one... if the difference between
 746 +            * samples is too great, ignore the sample.
 747 +            */
 748 +           uiXDiff = abs(guiLastX - sTouch.uiX);
 749 +           uiYDiff = abs(guiLastY - sTouch.uiY);
 750 +           uiInvPressureDiff = abs(guiLastInvPressure - uiInvPressure);
 751 +
 752 +           if (uiXDiff < TS_MAX_VALID_XY_CHANGE
 753 +               && uiYDiff < TS_MAX_VALID_XY_CHANGE
 754 +               && uiInvPressureDiff < TS_MAX_VALID_PRESSURE_CHANGE)
 755 +           {
 756 +               bValidPoint = 1;
 757 +           }
 758 +       }
 759 +       else
 760 +       {
 761 +           bValidPoint = 1;
 762 +       }
 763 +
 764 +       /*
 765 +        * If either the pen was put down or dragged make a note of it.
 766 +        */
 767 +       if (bValidPoint)
 768 +       {
 769 +           guiLastX = sTouch.uiX;
 770 +           guiLastY = sTouch.uiY;
 771 +           guiLastInvPressure = uiInvPressure;
 772 +           bCurrentPenDown = 1;
 773 +           ee93xx_ts_evt_add(1, sTouch.uiX, sTouch.uiY,
 774 +                             0x7000000 / uiInvPressure);
 775 +       }
 776 +
 777 +       TS_Soft_Scan_Mode();
 778 +       return;
 779 +    }
 780 +
 781 +    TS_Hardware_Scan_Mode();
 782 +}
 783 +
 784 +static void ep93xx_ts_set_direct(unsigned int uiADCSwitch)
 785 +{
 786 +    unsigned int uiResult;
 787 +
 788 +    /*
 789 +     * Set the switch settings in the direct register.
 790 +     */
 791 +    __raw_writel(0xaa, EP93XX_TOUCHSCREEN_SWLOCK);
 792 +    __raw_writel(uiADCSwitch, EP93XX_TOUCHSCREEN_DIRECT);
 793 +
 794 +    /*
 795 +     * Read and throw away the first sample.
 796 +     */
 797 +    do {
 798 +       uiResult = __raw_readl(EP93XX_TOUCHSCREEN_XYRESULT);
 799 +    } while (!(uiResult & TSXYRESULT_SDR));
 800 +
 801 +}
 802 +
 803 +static unsigned int ADCGetData(unsigned int uiSamples, unsigned int uiMaxDiff)
 804 +{
 805 +    unsigned int uiResult, uiValue, uiCount, uiLowest, uiHighest, uiSum, uiAve;
 806 +
 807 +    do
 808 +    {
 809 +       /*
 810 +        * Initialize our values.
 811 +        */
 812 +       uiLowest        = 0xfffffff;
 813 +       uiHighest       = 0;
 814 +       uiSum           = 0;
 815 +
 816 +       for (uiCount = 0; uiCount < uiSamples; uiCount++)
 817 +       {
 818 +           /*
 819 +            * Read the touch screen four more times and average.
 820 +            */
 821 +           do {
 822 +               uiResult = __raw_readl(EP93XX_TOUCHSCREEN_XYRESULT);
 823 +           } while (!(uiResult & TSXYRESULT_SDR));
 824 +
 825 +           uiValue = (uiResult & TSXYRESULT_AD_MASK) >> TSXYRESULT_AD_SHIFT;
 826 +           uiValue = ((uiValue >> 4) + ((1 + TSXYRESULT_X_MASK)>>1)) & TSXYRESULT_X_MASK;
 827 +
 828 +           /*
 829 +            * Add up the values.
 830 +            */
 831 +           uiSum += uiValue;
 832 +
 833 +           /*
 834 +            * Get the lowest and highest values.
 835 +            */
 836 +           if (uiValue < uiLowest)
 837 +           {
 838 +               uiLowest = uiValue;
 839 +           }
 840 +           if (uiValue > uiHighest)
 841 +           {
 842 +               uiHighest = uiValue;
 843 +           }
 844 +       }
 845 +    } while ((uiHighest - uiLowest) > uiMaxDiff);
 846 +
 847 +    /*
 848 +     * Calculate the Average value.
 849 +     */
 850 +    uiAve = uiSum / uiSamples;
 851 +
 852 +    return uiAve;
 853 +}
 854 +
 855 +/*
 856 + * CalculateInvPressure
 857 + *
 858 + * Is the Touch Valid.  Touch is not valid if the X or Y value is not
 859 + * in range and the pressure is not  enough.
 860 + *
 861 + * Touch resistance can be measured by the following formula:
 862 + *
 863 + *          Rx * X *     Z2
 864 + * Rtouch = --------- * (-- - 1)
 865 + *           4096        Z1
 866 + *
 867 + * This is simplified in the ration of Rtouch to Rx.  The lower the value, the
 868 + * higher the pressure.
 869 + *
 870 + *                     Z2
 871 + * InvPressure =  X * (-- - 1)
 872 + *                     Z1
 873 + */
 874 +static unsigned int CalculateInvPressure(void)
 875 +{
 876 +    unsigned int uiInvPressure;
 877 +
 878 +    /*
 879 +     * Check to see if the point is valid.
 880 +     */
 881 +    if (sTouch.uiZ1 < MIN_Z1_VALUE)
 882 +    {
 883 +       uiInvPressure = 0x10000;
 884 +    }
 885 +
 886 +    /*
 887 +     * Can omit the pressure calculation if you need to get rid of the division.
 888 +     */
 889 +    else
 890 +    {
 891 +       uiInvPressure = ((sTouch.uiX * sTouch.uiZ2) / sTouch.uiZ1) - sTouch.uiX;
 892 +    }
 893 +
 894 +    return uiInvPressure;
 895 +}
 896 +
 897 +/*
 898 + * TS_Hardware_Scan_Mode
 899 + *
 900 + * Enables the ep93xx ts scanning engine so that when the pen goes down
 901 + * we will get an interrupt.
 902 + */
 903 +static void TS_Hardware_Scan_Mode(void)
 904 +{
 905 +    unsigned int uiDevCfg;
 906 +
 907 +    /*
 908 +     * Disable the soft scanning engine.
 909 +     */
 910 +    sTouch.state = TS_STATE_STOPPED;
 911 +    Stop_Timer2();
 912 +
 913 +    /*
 914 +     * Clear the TIN (Touchscreen INactive) bit so we can go to
 915 +     * automatic scanning mode.
 916 +     */
 917 +    uiDevCfg = __raw_readl(EP93XX_SYSCON_DEVCFG);
 918 +    ep93xx_syscon_swlocked_write(uiDevCfg & ~EP93XX_SYSCON_DEVCFG_TIN,
 919 +                                EP93XX_SYSCON_DEVCFG);
 920 +
 921 +    /*
 922 +     * Enable the touch screen scanning state machine by setting
 923 +     * the ENABLE bit.
 924 +     */
 925 +    __raw_writel(TSSETUP_DEFAULT | TSSETUP_ENABLE, EP93XX_TOUCHSCREEN_SETUP);
 926 +
 927 +    /*
 928 +     * Set the flag to show that we are in interrupt mode.
 929 +     */
 930 +    gScanningMode = TS_MODE_HARDWARE_SCAN;
 931 +
 932 +    /*
 933 +     * Initialize EP93XX_TOUCHSCREEN_SETUP2 register.
 934 +     */
 935 +    __raw_writel(TSSETUP2_DEFAULT, EP93XX_TOUCHSCREEN_SETUP2);
 936 +
 937 +}
 938 +
 939 +/*
 940 + * TS_Soft_Scan_Mode
 941 + *
 942 + * Sets the touch screen to manual polling mode.
 943 + */
 944 +static void TS_Soft_Scan_Mode(void)
 945 +{
 946 +    unsigned int uiDevCfg;
 947 +
 948 +    if (gScanningMode != TS_MODE_SOFT_SCAN)
 949 +    {
 950 +       /*
 951 +        * Disable the touch screen scanning state machine by clearing
 952 +        * the ENABLE bit.
 953 +        */
 954 +       __raw_writel(TSSETUP_DEFAULT, EP93XX_TOUCHSCREEN_SETUP);
 955 +
 956 +       /*
 957 +        * Set the TIN bit so we can do manual touchscreen polling.
 958 +        */
 959 +       uiDevCfg = __raw_readl(EP93XX_SYSCON_DEVCFG);
 960 +       ep93xx_syscon_swlocked_write(uiDevCfg | EP93XX_SYSCON_DEVCFG_TIN,
 961 +                                    EP93XX_SYSCON_DEVCFG);
 962 +    }
 963 +
 964 +    /*
 965 +     * Set the switch register up for the first ADC reading
 966 +     */
 967 +    ep93xx_ts_set_direct(sSwitchSettings.uiSwitchZ1);
 968 +
 969 +    /*
 970 +     * Initialize our software state machine to know which ADC
 971 +     * reading to take
 972 +     */
 973 +    sTouch.state = TS_STATE_Z1;
 974 +
 975 +    /*
 976 +     * Set the timer so after a mSec or two settling delay it will
 977 +     * take the first ADC reading.
 978 +     */
 979 +    Set_Timer2_uSec(EP93XX_TS_PER_POINT_DELAY_USEC);
 980 +
 981 +    /*
 982 +     * Note that we are in sw scanning mode not hw scanning mode.
 983 +     */
 984 +    gScanningMode = TS_MODE_SOFT_SCAN;
 985 +
 986 +}
 987 +
 988 +static void Set_Timer2_uSec(unsigned int uiDelay_uSec)
 989 +{
 990 +    unsigned int uiClockTicks;
 991 +
 992 +    /*
 993 +     * Stop timer 2
 994 +     */
 995 +    __raw_writel(0, EP93XX_TIMER2_CONTROL);
 996 +
 997 +    uiClockTicks = ((uiDelay_uSec * 508) + 999) / 1000;
 998 +    __raw_writel(uiClockTicks, EP93XX_TIMER2_LOAD);
 999 +    __raw_writel(uiClockTicks, EP93XX_TIMER2_VALUE);
1000 +
1001 +    /*
1002 +     * Set up Timer 2 for 508 kHz clock and periodic mode.
1003 +     */
1004 +    __raw_writel(0xC8, EP93XX_TIMER2_CONTROL);
1005 +
1006 +}
1007 +
1008 +static void Stop_Timer2(void)
1009 +{
1010 +    __raw_writel(0, EP93XX_TIMER2_CONTROL);
1011 +}
1012 +
1013 +/*
1014 + * Initialization and exit routines
1015 + */
1016 +int __init ep93xx_ts_init(void)
1017 +{
1018 +    int retval;
1019 +
1020 +    retval = request_irq(IRQ_EP93XX_TOUCH, ep93xx_ts_isr,
1021 +                        IRQF_DISABLED, "ep93xx_ts", 0);
1022 +    if (retval)
1023 +    {
1024 +       printk(KERN_WARNING "ep93xx_ts: failed to get touchscreen IRQ\n");
1025 +       return retval;
1026 +    }
1027 +
1028 +    retval = request_irq(IRQ_EP93XX_TIMER2, ep93xx_timer2_isr,
1029 +                        IRQF_DISABLED, "ep93xx_timer2", 0);
1030 +    if (retval)
1031 +    {
1032 +       printk(KERN_WARNING "ep93xx_ts: failed to get timer2 IRQ\n");
1033 +       free_irq(IRQ_EP93XX_TOUCH, 0);
1034 +       return retval;
1035 +    }
1036 +
1037 +    misc_register(&ep93xx_ts_miscdev);
1038 +
1039 +    sTouch.state = TS_STATE_STOPPED;
1040 +    gScanningMode = TS_MODE_UN_INITIALIZED;
1041 +
1042 +    printk(KERN_NOTICE "ep93xx touchscreen driver configured for 4-wire operation\n");
1043 +
1044 +    return 0;
1045 +}
1046 +
1047 +void __exit ep93xx_ts_exit(void)
1048 +{
1049 +    Stop_Timer2();
1050 +
1051 +    free_irq(IRQ_EP93XX_TOUCH, 0);
1052 +    free_irq(IRQ_EP93XX_TIMER2, 0);
1053 +
1054 +    misc_deregister(&ep93xx_ts_miscdev);
1055 +}
1056 +
1057 +module_init(ep93xx_ts_init);
1058 +module_exit(ep93xx_ts_exit);
1059 +
1060 +MODULE_DESCRIPTION("Cirrus EP93xx touchscreen driver");
1061 +MODULE_SUPPORTED_DEVICE("touchscreen/ep93xx");
1062 +MODULE_LICENSE("GPL");
1063 --- a/arch/arm/mach-ep93xx/core.c
1064 +++ b/arch/arm/mach-ep93xx/core.c
1065 @@ -207,6 +207,7 @@ void ep93xx_syscon_swlocked_write(unsign
1066
1067         spin_unlock_irqrestore(&syscon_swlock, flags);
1068  }
1069 +EXPORT_SYMBOL(ep93xx_syscon_swlocked_write);
1070
1071  void ep93xx_devcfg_set_clear(unsigned int set_bits, unsigned int clear_bits)
1072  {