target/linux/brcm63xx/patches-4.4/580-board_AD1018.patch

   1 --- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
   2 +++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
   3 @@ -366,6 +366,74 @@ static struct board_info __initdata boar
   4         },
   5  };
   6
   7 +static struct sprom_fixup __initdata ad1018_fixups[] = {
   8 +       { .offset = 6, .value = 0x1c00 },
   9 +       { .offset = 65, .value = 0x1256 },
  10 +       { .offset = 96, .value = 0x2046 },
  11 +       { .offset = 97, .value = 0xfe69 },
  12 +       { .offset = 98, .value = 0x1726 },
  13 +       { .offset = 99, .value = 0xfa5c },
  14 +       { .offset = 112, .value = 0x2046 },
  15 +       { .offset = 113, .value = 0xfea8 },
  16 +       { .offset = 114, .value = 0x1978 },
  17 +       { .offset = 115, .value = 0xfa26 },
  18 +       { .offset = 161, .value = 0x2222 },
  19 +       { .offset = 169, .value = 0x2222 },
  20 +       { .offset = 171, .value = 0x2222 },
  21 +       { .offset = 173, .value = 0x2222 },
  22 +       { .offset = 174, .value = 0x4444 },
  23 +       { .offset = 175, .value = 0x2222 },
  24 +       { .offset = 176, .value = 0x4444 },
  25 +};
  26 +
  27 +static struct board_info __initdata board_AD1018 = {
  28 +       .name                                   = "96328avngr",
  29 +       .expected_cpu_id                        = 0x6328,
  30 +
  31 +       .has_uart0                              = 1,
  32 +       .has_pci                                = 1,
  33 +       .use_fallback_sprom                     = 1,
  34 +
  35 +       .has_ohci0                              = 1,
  36 +       .has_ehci0                              = 1,
  37 +       .num_usbh_ports                         = 1,
  38 +
  39 +       .has_enetsw                             = 1,
  40 +
  41 +       .enetsw = {
  42 +               .used_ports = {
  43 +                       [0] = {
  44 +                               .used           = 1,
  45 +                               .phy_id         = 1,
  46 +                               .name           = "FIBRE",
  47 +                       },
  48 +                       [1] = {
  49 +                               .used           = 1,
  50 +                               .phy_id         = 2,
  51 +                               .name           = "LAN3",
  52 +                       },
  53 +                       [2] = {
  54 +                               .used           = 1,
  55 +                               .phy_id         = 3,
  56 +                               .name           = "LAN2",
  57 +                       },
  58 +                       [3] = {
  59 +                               .used           = 1,
  60 +                               .phy_id         = 4,
  61 +                               .name           = "LAN1",
  62 +                       },
  63 +               },
  64 +       },
  65 +
  66 +       .fallback_sprom = {
  67 +               .type                           = SPROM_BCM43217,
  68 +               .pci_bus                        = 1,
  69 +               .pci_dev                        = 0,
  70 +               .board_fixups                   = ad1018_fixups,
  71 +               .num_board_fixups               = ARRAY_SIZE(ad1018_fixups),
  72 +       },
  73 +};
  74 +
  75  static struct sprom_fixup __initdata ar5381u_fixups[] = {
  76         { .offset = 97, .value = 0xfee5 },
  77         { .offset = 98, .value = 0x157c },
  78 @@ -2684,6 +2752,7 @@ static const struct board_info __initcon
  79  #endif
  80  #ifdef CONFIG_BCM63XX_CPU_6328
  81         &board_96328avng,
  82 +       &board_AD1018,
  83         &board_AR5381u,
  84         &board_AR5387un,
  85         &board_963281TAN,
  86 @@ -2798,6 +2867,7 @@ static struct of_device_id const bcm963x
  87         { .compatible = "d-link,dsl-274xb-f", .data = &board_dsl_274xb_f1, },
  88         { .compatible = "nucom,r5010unv2", .data = &board_R5010UNV2, },
  89         { .compatible = "sagem,f@st2704v2", .data = &board_FAST2704V2, },
  90 +       { .compatible = "sercomm,ad1018-nor", .data = &board_AD1018, },
  91  #endif
  92  #ifdef CONFIG_BCM63XX_CPU_6338
  93         { .compatible = "brcm,bcm96338gw", .data = &board_96338gw, },