target/linux/brcm63xx/dts/spw303v.dts

   1 /dts-v1/;
   2
   3 #include "bcm6358.dtsi"
   4
   5 #include <dt-bindings/input/input.h>
   6
   7 / {
   8         model = "T-Com Speedport W303 V";
   9         compatible = "t-com,spw303v", "brcm,bcm6358";
  10
  11         gpio-keys-polled {
  12                 compatible = "gpio-keys-polled";
  13                 #address-cells = <1>;
  14                 #size-cells = <0>;
  15                 poll-interval = <20>;
  16                 debounce-interval = <60>;
  17
  18                 reset {
  19                         label = "reset";
  20                         gpios = <&gpio0 11 0>;
  21                         linux,code = <KEY_RESTART>;
  22                 };
  23                 ses {
  24                         label = "ses";
  25                         gpios = <&gpio1 5 1>;
  26                         linux,code = <KEY_WPS_BUTTON>;
  27                 };
  28         };
  29
  30         gpio-leds {
  31                 compatible = "gpio-leds";
  32
  33                 ses_green {
  34                         label = "spw303v:green:ses";
  35                         gpios = <&gpio0 0 1>;
  36                 };
  37                 power_adsl_red {
  38                         label = "spw303v:red:power+adsl";
  39                         gpios = <&gpio0 2 1>;
  40                 };
  41                 ppp_green {
  42                         label = "spw303v:green:ppp";
  43                         gpios = <&gpio0 5 1>;
  44                 };
  45                 power_adsl_green {
  46                         label = "spw303v:green:power+adsl";
  47                         gpios = <&gpio0 22 1>;
  48                         default-state = "on";
  49                 };
  50                 voip_green {
  51                         label = "spw303v:green:voip";
  52                         gpios = <&gpio0 27 1>;
  53                 };
  54                 pots_green {
  55                         label = "spw303v:green:pots";
  56                         gpios = <&gpio0 31 1>;
  57                 };
  58         };
  59 };
  60
  61 &pflash {
  62         status = "ok";
  63
  64         linux,part-probe = "bcm63xxpart";
  65
  66         cfe@0 {
  67                 label = "CFE";
  68                 reg = <0x000000 0x010000>;
  69                 read-only;
  70         };
  71
  72         linux@10000 {
  73                 label = "linux";
  74                 reg = <0x010000 0x7e0000>;
  75         };
  76
  77         nvram@7f0000 {
  78                 label = "nvram";
  79                 reg = <0x7f0000 0x010000>;
  80         };
  81 };